Yup the new super pooper forgot his calculator, 55 grand slab the guy feel into a k hole somewhere ordered 7 extra trucks.

Concrete being pumped through lines generates heat in order to have a usable slump at the slab end of the hose the mud must be wetter to flow through the lines & reach the end at a manageable consistency .In order to achieve that through 3 pumps that would have to be a special mix high in Portland cement .

The new guy

Probably wrong house

To run that pump hose any higher than the hip is completely stupid.

Usually concrete jobs are quoted a set price ,say $1.00 per square foot so a 2,000. Sq ft job would be 2,000.00 + tax materials not included.

Are you telling me that concrete crew charged a square footage price for place & Finnish plus $2,000.00 for a power screet. Scam

When you place without screetting to level (flat) & just rake & shake (rake it to eye & shake the bull float to fill lows / remove humps you get a piece of crap slab. Now to allow a pump operater to pump product with an unmanned hose is just stupid 30 years in the trade i,ve never seen such a grouse neglect of responsibility. Un less there was a malfunction of mixer controls over filling a pump is a direct result of human error.

Rebar holding down the dirt.

That is funny 😂😂😂😂

California? Yikes 😂

😂

gunnite/shotcrete

That Viber-Screed will save your teams backs and buy you more time to finish.

Remind to never set foot anywhere near the building with that weak af rebar column.

That's a pool lmao bro

That’s a pool. Right?

Yes They would absolutely work

He is showing you some footage from 1 million years bc. and poking fun at them. They are not so bad. Be happy that you can see some footage from 1 million years bc.

It grout boys with #5 rebar.

A wall foundation??? That’s a pool

If it ain’t west coast then nobody’s doing it right!

You do need forms for that column. Even if it's a pool. That's sloppy work. In pools, the Tile guys usually get stuck fixing all the stupid shit that the Guniters or shot Crete guys do. I know from tiling pools for 20+ years. I do charge for all the extra work.

Third world,,,Fer Shur 😅😅😅

Shocking technique to ‘pour a pool’ a few fundamental issues there. It’s not shot Crete. The concrete is being pumped and also assisted by gravity. Should ideally be shot Crete to avoid voids in the concrete. The other big issue is the cover over the steel. Should be 40-50mm of concrete cover on the back, front, top and bottom so the steel doesn’t rust over time and leech through the interior of the pool. If rendering and fully tiled this will help mitigate the issues I’ve stated above for the inside of the pool but still not good practice, and won’t help the lack of cover over the steel on the outside. Third issue is where are the steel bar chairs to keep the steel of the ground? Or the walls? Big gap behind the walls but they will eventually get backfilled and that material will transfer moisture through to the steel, rust and cause issues. In Australia we call these kinds of workers donkeys for a reason. That’s being polite.

It's a pool dumbass

Fresno's were tha best along time ago. I live n Colorado n most inspectors don't like them due 2 temperatures here due 2 spalling on surface on concrete guys. They do n tha rite hands work great!

Yes takes one - 2 less guys if you have one can pay for it quick with labor savings

I got a toro mud buggy that is concrete on tracks but dang bro. That track mixer is awesome.

Pools use low slump shotcrete. The column is usong a low slump conc as well Do you actually know what you are talking about?

Not a good look !!!! Leave it smooth !!!!

these bullfloats are over $1.000 kinda pricey but I'm sure they would work

I would expect them to plaster some of that concrete on the outside of the beams before it fully cures.

Bought one for 150.00 at an auction. Used it 3 times and sold it for 500.00 Not a bad tool

What would u know of its unnecessary, you just pump. And on top of yall u pour a wet ass mix

I think you don't know what you talking about,

Years ago I graded a garage floor for a concrete finisher and went back the next day to help him pour it and the second truck driver forgot to check and drove the whole way there with the water turned on, yeah it started to pour out as soon as he pulled it.😵, Mr.Hoffman sent it back to the plant and had a very long talk to the owner and driver.

Yes. 3 of them for 6 k. You can lay 25,000 sf a day with them.

That screed z not on grade😮! U can see it! Good luck man u need good muckers. Back bone z what u need sir. That screed z at least 1"above grade sir. Good luck 2 u sir!

2x4 caveman .vibraskreed jetsons. im og , nothing beats kick pull but not for the ...weak apprentice 💪

Thats shit FR

Yes! %100 have paid for one and I’ll pay again. Had two of my best guys get shoulder arthroplasty surgery from years of screeding over the years. You gotta take care of your guys.

It's unnecessary to you cause you've never rodded

A Fresno a tool that finishers hardly use anymore

You’ve obviously never concreted before. What’s wrong with “bro” having the pump pipe around his neck?

Probably not allowed in California. Nothing else is.

Ever hear about self leveling concrete 😅

I love them ❤

Regular screed better

It’s for a pool you idiot that’s not cement or a foundation and the product is called gunnite