Insane Body Swap: El Camino Front End on Honda CR-V & V8 Honda Accord is GONE | BodeVision

[@StingrayOfficial]

Yes keep A/C. Yes turbo.

[@evafrasslewis5664]

Waited patiently for this one to drop

[@alfarosgarage]

I hope this channel continues to grow and rapidly at that. You’re amazing! You deserve all the subscribers and then some

[@midschoolchris5660]

Great decision on keeping that ac in player! Rad stuff

[@idigdaytona4478]

Coming right along ! A/C is nice if you can keep it.

[@Steezy.gunz_]

Dude never disappoints on this channel

[@BassManBobBassCovers]

Definitely impressive how when there's a major obstacle you just power through it no prob and find a solution. Looks amazing. Those panels are super cool too!

[@madlukasik]

I'm so stoked to see this finished! I'm both a Honda lover and a Chevy lover. So this combo has me excited!!

[@jack002tuber]

Glad to see the update. I like this build. Doing well.

[@M.Boatwright]

Being from Alabama I know how hot it is down here, keep the A.C you'll be glad you did if you drive and drag or just cruise to shows.

[@kylemcweeny878]

Im from Florida right around thr corner from bode actually. Keep the a,c!!!

[@MacsSpecialitiesProperties]

Yes, Drag and Drive!!

[@ItsDaJax]

I'm in Ky and a/c is sin, never use it.

[@M.Boatwright]

@@ItsDaJax here in southern Alabama we have high humidity that stacks on that heat and I've come close to dying in it twice so if the a.c works I'm using it.

[@ItsDaJax]

@@M.Boatwright I live in Kentucky, I'm familiar. Summers average about 90-95° without the heat index.

[@curtisbauer1614]

Keep up the awesome work brother! Can't wait to see how this continues to come along.

[@craigcaggiano431]

Love how you tied in the engine bay panels you created to secure that are for your fenders and front end too

[@JohnWD40TC02]

Looking good Adam you are making good progress and that engine bay is going to look mint👌👍

[@mikecrawford1961]

KEEP A/C !!!!!!!

[@CritterCustoms]

Definitely needs a turbo setup. Cool swap

[@leoehlingeriii4071]

Fabricator you are sir. Great work.

[@BTRk-m]

El Hondamino !!!! Fire 🔥

[@greenmachine5487]

"We finally beat Medicare" 😂😅

[@mike8818]

Wonder who he's voting for lol

[@jack002tuber]

LOL!!!

[@workingmansrestorations7071]

That's funny.

[@tysonparker7403]

I’m crying

[@davidmccormick1058]

Looking good! It will be awesome!

[@MacsSpecialitiesMotorsports]

Killin this Build!

[@richsmith6952]

Very cool project! Investors it. Nice work!

[@Dean-w5z]

Monte Carlo SS bumper would look awesome on there

[@MacsSpecialitiesProperties]

I love what his did with the chrome front bumper tho

[@waynesmith-r8c]

nice creative innovation,never wouldve thought of a crv meets a camino but its brilliant.....and im mainly a traditional american muscle car kind of guy who does love jdm,euro,italian cars as well

[@Nico_335i_DCT]

Very nice progress, Adam! And good luck to the winner, too! Have a great week. Dutch regards Nico.

[@leviemhovick2541]

If you have to extend the drive shaft, you should get a Freelander drive shaft with a viscous coupler and pin the rear diff while you're at it. Especially if you plan on boosting it.

[@crr79]

ditch the stock hood hinge and go for a hood strut set up, clear up a ton of space, love the build

[@brianedwardray1]

The "Riceamino" is lookin good my cracka, keep up the good work!!!

[@chasestewart302]

Cool you went over the give away car. Hopefully the new owner enjoys it.

[@richarcruz7843]

Niceeeeeeee work Man keep grinding keep goin Sky is th limit God Bless 🙏🏽🙏🏽🙏🏽

[@OKHall]

It's coming together nicely. Great job

[@ronsonkawewehi7985]

Yes been waiting…. Thank you bro loving it.

[@PapiDoesIt]

As a long time Honda fan, I have been glued to your channel for this build.

[@jorgemarkin1510]

Would have kept cruise for sure

[@scotschoor]

Kansas is a big state, but I hope I see it running around sometime.

[@stanleymartin1613]

Cool stuff!! Enjoyed watching ✌️ 😎

[@shanewright6958]

Looking good 👍👍

[@marlostewart1107]

The engine bay is gonna have folks like 🤯 in the end.

[@jerrymolina147]

Keep grinding 💪🏼

[@workingmansrestorations7071]

Coming along awsome

[@sicario_619_sd]

I love da crv Wheels on that el Camino lol

[@bobwilliams9395]

Yep hondamio. lookin good bode.

[@jamezkantor9574]

Where's the dohc vtec swap that's on the click bait photo? 😂 I'm guessing next video! Can't wait!!!!!

[@shanethompson7543]

Awesome Video.. Just wished your videos were longer...

[@KSwapTheWorld69]

This Is My First Comment. This Thing Is So Bad Ass! I'm Currently Getting My 69 C10 Ready To Do A Mid Mounted Turbo K24a2... 😬

[@StaredownGames]

FILM IT, we wanna see!

[@KSwapTheWorld69]

@@StaredownGames well that's what this account is for. 😅 It is going to be bad ass! Front Mid Engine Turbo'd K24a2 Cantilever Suspension 69 C10

[@StaredownGames]

@@KSwapTheWorld69 I'm there for it!

[@tommytech55]

I'm sure that you squared up the front end with the hood before you welded all of that in, Right🤔😅 Looks Great!

[@stevensilver1014]

nice work

[@sandalkid2351]

@Motionauto needs to take notes and start doing something similar to this guy. I miss the dedication and Trevor‘s videos.

[@jimsander8177]

As an uncle with an ‘81 El Camino, I am sad to say you have effectively surpassed my coolness.

[@562frankrivers2]

Keep the A/C unless you need to take it out for what ever reason. Believe me you’ll be using it

[@OldManTinkers]

New here found you on Facebook. Looks like allot of content I'm interested in.

[@StaredownGames]

"She bangs" - Ricky Martin

[@jacobcole6340]

It's Florida leave the a/c . But it's your build do what u like . Just a suggestion.

[@disturbingcreations1105]

El CR-Vino

[@tomtruesdale6901]

CR-Vamino is looking real good. Going to look killer when you are done. PLEASE put a real exhaust system on it and not a 'trash can' muffler like you see on so many Hondas.

[@griffinlyon]

be sick if you had some cool honda rims 3parted so you could run big wheels with honda rims.

[@OG_Zero_Cool]

This thing is dope! I found your channel because Korosumyself recommended your channel. I am sure glad he recommended it too I'm have benched watched from episode 1 up to episode 9 of the El Chapo swapo cant wait to see the end result!

[@WaRn00b85]

My uncle would've done a MUCH better job........... than me, on congratulating you on your progress. 😛 Keep it up bro! 🔥

[@Iowa599]

Fiberglass (or carbonfiber) hood & ditch the hood springs. just paint on the rust, so it matches.

[@scottdillow8825]

The swapmino

[@Wildboyz1987]

Great video!! What thickness is your sheet metal?

[@anthonyyates616]

That section you built looks like it will rub into the front corner of your front tires under a good bump the part that's beadrolled

[@TheTalonts]

You are obviously already planning to give this away because a Floridian talking about removing the AC is NUTS.

[@thejester8136]

What are you planning for the fact the dashboard sits so much closer to the front, and looks as if the steering wheel does too which in turn the seats gotta be closer to No ? I felt like the inside while you was sitting was huge in overall length. What’s the plans

[@BrandonShiver]

Is the driver side front tire unusually close to the new inner structure or just the camera angle? Looking forward to the next upload.

[@mattcrotts8370]

Love it! Excellent work on the filler pieces! Dimpled and bead rolled is truly artwork!

[@Torch4ya]

My uncle has a '36 nash with an LS fwiw 😂

[@wilahinely]

Leave the A/C

[@MarkeyGarza]

I don't see the windshield wipers on there?

[@roberthinkle981]

You need to get a race with Tom’s refurb and his Honda powerd mustang don’t no if you have heard of him he’s cool

[@efbuddies7839]

Really dropped the ball not having a “Hawk Tuah” intro

[@Victor-t1j5s]

😭

[@BodeVision]

Hawk tuah burned hot and I feel it’s old news. That was on the agenda for last week, but I missed an upload

[@brentthomas712]

Great stuff G!! Love the reinforcement in place. Exquisite work bro. 🔥

[@HIDNotfound]

The "Hold my beer" build of 2024. Keep grinding brother.

[@mike8818]

All thst room under the hood.... screw the K..... i say go J! Still room for turbo(s) or supercharger.

[@frankfurther3828]

What do you do with the tilted rear wheels?

[@BodeVision]

Space ship cuz. They’ll be fixed

[@frankfurther3828]

@@BodeVision Is it like rear control arms? I'm not familiar. will be watching.

[@The_TOMMYRAZOR]

My Uncle says Dimple Dies are just Speed Holes

[@garymcloughlin500]

So when are boosted boiz juicing up that engine??

[@ItsDaJax]

I'd have combined both radiator supports, like; -\__/-, kinda. Also a/c is for the weak.

[@stevenlane729]

Love the way you extended the e brake.

[@coolcat7918]

My uncle is starting to like it and I love the metal work, beating medicare feals great 👍

[@willmatic84]

Dang man the car is coming along freaking great love it I don't believe the OG Betty white is gone hope she has a good journey with the new owner 👍 #bodesqaud #projectcrmino

[@DariusBuildz]

Definitely leave the ac. The ultimate is a fast/quick car that also has ac.

[@tonyorwick492]

I love the way it's coming out so far

[@BoilerRoomRadio]

Looks like the rear wheel have WAY too much camber.

[@BodeVision]

The rear is as low as the coilovers will set and i need to get a camber kit to pull camber. Once I get wheels I’ll worry about final fitment

[@terrypickette118]

👍👍🇺🇲🇺🇲👍👍❤️🤍💙

[@petem6291]

Adam I think you do nice work , one thing I learned the hard way. when you have to fill your welding bottle ask your suppler what it would cost for the next size bottle up I know have all big bottles and they last a lot longer and if it was 70$ to fill the small bottle its like 90 $ to fill the big bottles( thats just and example )

[@d1specdrifter]

🎉🎉baddassery yo.

[@g_force3857]

I personally wouldn’t Biden the A/C… you live in Florida or are you having a senior moment and forgot 😂😂😂

[@stevenlane729]

Love your vision and workmanship on the front end. Did you test fit the bonnet before welding it all together?

[@BodeVision]

Yes. I know it’s correct since the grille established the width

[@michaelosmon]

Destroyed that f'n medicare 🤣 appreciate ya bud

[@carlosquintana6930]

Hello my friend I would like you to paint my car. How can I get in contact with you?

[@rrandy_]

Constructive criticism; get someone to help with your algorithm, perhaps try starting another project, which would allow you to create more content. For as old as this channel is you should have way way more views. I’ll check in a couple of months and we’ll see how far along this build is.🤙🏽 hopefully you still have the construction gig available to you 🤙🏽

[@jcruzcustoms8418]

🔥🔥🔥🔥🔥

[@appleapple3855]

Beat medicare🤣🤣🤣 I see what ya did there

[@charlieescobar6718]

Dont make it a race car.... keep the A/C you live in FL

[@winemillerbrian]

Yea buddy

[@jameswalradt7378]

WE FINALLY BEAT MEDICARE! ... 😂

[@AaronSpielman]

I just realized - maintenance is going to be goofy, given you'll need complete sets of both metric and SAE tools.

[@Chopped93VX]

If you work on stuff, why wouldn’t you already have both anyway? Lots of equipment and vehicles come with both metric and SAE from the factory.

[@jagharingenyoutube]

Need to put some 24" inch and make it a "donk". That would piss some people off :)

[@EvanMoon]

F a r t

[@skeltane]

I have to ask. So why did you give the Honda away? Maybe you already gave that answer and I just missed it?