World's First AWD B-Series El Camino Body Swap: Turbo Installed, Body worked, & Motor Pulled!

[@georqedubyakush6066]

Honestly it sucks that the various factors of YT have caused us to think hes working slow on this. A body swap at this stage in around half a year is impressive. Homie is busting his ass for us to watch for free and we expect him to work faster.

[@ItsDaJax]

He's moving faster than some builds I've seen. These builds do take time, though, a lot of work that goes past basic mods and simple fabbing will take more than a day or two, especially if one has other life obligations. These folks are no different than us, they have lives outside current project and youtube. The stress of youtube is bad enough, which is why I don't worry about building up my channel.

[@ronaldorivera9297]

@@georqedubyakush6066 facts

[@drstallings_314]

These keyboard warriors who have never did mechanic work, let along fab work. Quality work takes time. This is a crazy build.

[@Torch4ya]

💯

[@Pittsburgh-412]

You are correct but don't forget that he does work on customer vehicles too

[@h.a.bgarage1008]

Man, this channel deserves to have like 1 million subscribers this dude is dope and funny

[@paulwignell9733]

Seen loads of body swaps, you are by far the best... methodical, precise, and functional. No doubt this will look factory when you're finished, your work is amazing

[@K24_Insight_Swap]

@@paulwignell9733 Hood popped at a car show with a go pro for reactions video is going to reach tending on this one FOR SURE!

[@petem6291]

My uncle said your doing a great job , considering all that goes into this type of job I would say your making great time and progress.

[@curtisbauer1614]

Keep it up Adam. You're killing it. Can't wait to see the finished product, no matter how long it takes.

[@GSMMW]

Happy to see you are finalizing the last of the finalizing steps before finalizing the finalized build!

[@jimsubtle886]

Awesome update. Love all of the progress so far! Thank you for you posting

[@brentthomas712]

Your attention to details is unprecedented & your professionalism is off the chain. Keep doing you & this little community will promote the Bode standard.

[@jack002tuber]

My uncle wants those boots. 😅😅😅😅😅😅

[@b20nando]

Clean bro keep up the good work

[@robertbisson964]

My uncle brush painted his 56 Belair 2 tones and left with it has soon has he was done, he said it would dry up on his way back. ( true story ) i was about 14 and now 76 and still remember it. keep those video's coming.

[@ACCORDriver_NL]

Y E S ! ! ! ! Another video on this awesome project! Giving it a thumbs up before even seeing it. I was looking forward to this! Thanks, man. You're awesome.

[@bazilwreckerloughead]

Looking so great, I never want it to end, but I want to see what the finished product looks like!

[@appleapple3855]

Wait..... some people think this is taking too long? Wth? You are doing fantastic my guy. Thank you!

[@calvemar]

Nice progress man! Can't wait to see the end result!

[@seanwilliams3377]

My Uncle was more of a big block guy, but he would have respected this build for sure.

[@mattcrotts8370]

Great job! Thanks for the update. Keep up the good work

[@Hectorthainspector]

My Uncle and I say you have the cleanest builds on YT … killin it homie !

[@drstallings_314]

Excellent work, block out the haters.

[@tomtruesdale6901]

Good job on the El Hondaino

[@craigallenbeckett]

Looking great! I like when you provide details of ‘how’ you do things. I have painted cars and realize the amount of work it takes. You are killing it! This has to be my favourite build so far, not because I particularly like the CRV or El Camino, just because the uniqueness of it and I can apply some methods you are using to my own projects.

[@appleapple3855]

Better than me. I tend to wear shop sandles. Burned my feet while grinding and welding a number of times.😂

[@BassManBobBassCovers]

Coming together crazy fast! Especially for a car that's never been made before. The cool thing about buying a car with a large number of missing items is when you get all the new parts on with the fresh paint, it's going to look nuts!!

[@aefaf366]

INSANE PROGRESS AND SUCH GOOD WORK

[@Bert114]

You are so lucky that you have that crane makes taking the engine out so easy. Great progress brother

[@BodeVision]

It was a great purchase

[@Bert114]

@@BodeVision facts you definitely got your moneys worth out of it

[@dawsongiardino2802]

You should get a vtec head for that b20 to really make some power and a set of rods in the motor while it’s out.

[@jesustejada488]

Loving the “El CRaVino” Build Keep it up Man

[@ZILAwelds]

My uncle expected this video a day or 2 ago

[@JustinKapow]

I was so exited to see the engine come back out. Can’t wait to see how you do the engine bay.

[@krakdaus5442]

Such an insane build. Can't wait to see it finished

[@jimmusgrave3229]

Awesome new video. I love these body swap projects. It takes a ot of ingenuity to find solution to problems you did know existed. I get tired of 30 minute videos sticking a LS motor into a chevy.

[@carenthusiastlifestyle2950]

I have had great luck running the evil energy quick clamps instead of couplers, makes the bay/intercooler piping a bit better looking, they are pretty affordable as well unlike vibrant

[@coulterbill]

Dude is killing it, I love this build. I have a g body ElCamino, but I also have a boring but awesomely reliable Honda Element. This is like the bastard child that would happen if they skrewed around lol.

[@M.Boatwright]

Won't be long now, coming together really well.

[@dwightpr8541]

I love how you have your little place so organized and everything look really clean Love the motivation you have for these kind of jobs have a really good day

[@rogerkendrick1685]

Wow... Great job brother

[@Bowtiesandrice]

That car is like the core of my channel Bow ties and rice it’s the Japanese mullet wish I would of thought of it please do a great paint job on it very inspiring thanks Tom Bow Ties and Rice 😊

[@victor440_]

Awesome job 👍

[@Nico_335i_DCT]

It's looking great Adam. And it takes time to do this the right way. I'm hyped. Thanks for sharing, Dutch regards Nico.

[@miguelvalle7787]

Best back ground music 4 sure!!! Great job 👏

[@victorwilks88]

Hottest build at the moment 🔥

[@shanebrowning6817]

As an uncle myself, i wish I had half the skills you have. Looking forward to the next video.

[@tiaanvandermerwe6639]

Love it end is in sight 😍

[@charlieescobar6718]

As always Bode V delivering quality content and well detailed explanation. My hat goes off to you and your channel my friend.

[@ZacharyProsper-j8m]

I see you painting 🖼 it the 97-01 blue metallic 😅😅😅🎉🎉

[@mattbauman]

Coming along nicely man. I am stoked to see it in paint.

[@ronniebaker3036]

Man I'd love to have that it's awesome great work dude

[@ronaldorivera9297]

Killing it brother

[@richcaseaxon]

This is looking great, in fact you're taking it to a much higher level than I expected, I'm used to watching more rat rod F100 type swaps. Can't wait to see how it progresses, or when you put this one up for raffle, because I'm feeling lucky....cheers!

[@Xaltar_]

Been following from day 1, loved it then, love it more now. Awesome job so far.

[@garymcloughlin500]

That rear camber is throwing my head to a place that makes me think something is wrong. But I'm loving the build.

[@JohnWD40TC02]

You are doing a great job on the El Camino Body Swap Adam, I'm not in a position to tell you if you should be doing it differently as I don't have the skills that you have these days I haven't done a car restoration since the early 80's, I just enjoy my painting in my homemade booth👌looking forward to the next instalment🙏👍John UK

[@clintonreed4815]

Great work sir. Been ready for the O’L El cr mino to be one color.

[@coolcat7918]

My uncle says you're killing it 🔥

[@willmatic84]

Loving the progress Adam is looking more like a vehicle 👌#bodesqaud #projectcrmino

[@joshdarnell6207]

Your killing it!! Like my Uncle does

[@ronnydiederich6081]

Love all your builds! Keep up the good work!

[@The_TOMMYRAZOR]

My Uncle says El Hondamino is an innovation of The Crossover Crossover. He’s also drunk and smokes Marlb Reds like a chimney

[@HotGritz910]

Awesome job, man. i thought my 1jzgte swap in my 260z was tough; you are killing it, bro!

[@Phil-b3z]

Can definitely see the time you've put in with the body work. Looking mean as. 💯😎

[@dexmcdaniel9072]

Fire content as always bode my guy let's go 💪💪💪

[@WaRn00b85]

Great progress bro! Keep up the hard work, we're looking forward to the next one! Peace!

[@jordanhickman]

Getting close! Looking good!

[@alanhawkins2134]

Killing it bro!! Keep on keeping on

[@EvelynSalazar-z6i]

Amazing job WOW YOU ARE killing it 💯🫶✨🏅🎖️🥇🥉🥈 🔥🏆🏆 you are the man

[@Smashy71-72]

Crazy build

[@v4yt126]

welcome back

[@bobwilliams9395]

My Uncle would have just slapped an e bay turbo on and drive it primer. Lookin good bode!🤘🤘

[@frankensteinkustomz2877]

Drop the "My uncle can do it better" shirts already!

[@BodeVision]

This is a must!

[@Gedden]

This is turning out great!

[@BigAlHawkins]

ROCK IT OUT .

[@gt1man931]

No Bueno on those jank-assed silicone couplers, that is ebay beginner level. Too nice of a build to use that.

[@MC4D.]

Seats on the bed like the Subie Brats would be cool on the Hon-Camino

[@philipfahnestock]

Looking really good so far! I would buy a roll pan for that rear bumper though, it would match the front more. Just IMO, but awesome build! Keep up the good work! 😊

[@workingmansrestorations7071]

That shop is so cool. I have a 2 car garage and i cant do anything in it and you doing complete restorations in 1 car

[@cheapandeasymods]

Man another awesome episode! Keep up the great work!!

[@MacAttack2010]

rock on. It'd be sweet to win this kick ass build

[@phretsCM]

im a fan of the full name. Chevrolet El Hamino

[@harrypapageorge9735]

Loving this build man…. Great job😉👌🏼

[@PeterFennert-x5g]

My uncle likes to spray paint with an old windex bottle. Turned out not too bad. Lol

[@PetesCreativeRecycling]

That Intro poking fun at Habachi Autobody?!

[@mrj-charles6383]

I think a tonneau cover would be a nice finishing touch. The reason being is the wide wheel wells in the back look a bit out of place on this. Just my opinion otherwise I am impressed you took a parts car and made it into something.

[@waltpastick1236]

Tucked in real nice like

[@tonyorwick492]

I'm M loving this build❤

[@dww0902]

I think the OG CRV color would be cool 🤙

[@levidbateman5174]

Looks amazing!, good stuff like where this headed… next video!

[@beauyo4722]

just wanna say you arent gonna want to go past about 300hp with that B20 the sleeves are really thin between the combustion chambers and crack and blow the motor after you put more than about 14psi in them, id look into finding a b18b1 block because you can make 400hp stock bottom end on those or getting the b20 sleeved

[@joel4491]

Looking good

[@kevindamaso4338]

Man all that work might as well shave the engine bay make everything look clean and nice that's so far you've done a great job take it to the next level on this one,😜

[@HackDPlanet]

🔥🔥🔥🔥

[@ItsDaJax]

All this work you're putting in this car and engine, do yourself a solid, and make sure you got a proper airbox for that thing, and good heat resistant material for that zip tube. You ain't slacked off yet.

[@MacsSpecialitiesProperties]

Way way cooler than my uncles Elco! 🤣🤣🤣

[@EJayNine]

My Uncle built 2 Honda El camino's at the same time. JK I'm from the UK The only El Camino's I've ever seen are in GTA. P.s go slow, that means more videos 😁

[@MILANOKIS]

You're work is amazing! Any plans in the future on engine setups? K Swap?

[@davejames2015]

The cheap amazon black blow off valve works, had to polish the cylinder 😅 I think it's a 1" used the silicone t. Love your work

[@spaceodyssey0493]

The only channel where legitimacy, quality and genuality still reside. Wuhwuhwelcome to bodevision MFS.

[@workingmansrestorations7071]

She is looking good for only being a $500 ride. Alot of work, but in the end, it will be one of a kind for sure

[@stevenvandiesel7408]

Yeah Boi.! Loving this 🤘😎

[@patrickbelanger437]

Long story short, my uncle kills literally everything, and u are an artists not like my uncle 😂Mint buddy ❤🎉 luv it ❤️🤍🤍

[@v65sabreking]

Good job bro