This is an oddball abrasive tool from Bosch. It's a home gamer tool that might come in handy. This shows how Bosch Green is engineered for low cost. Thanks for your help! Patrons get early access here / ave
Пікірлер: 1 200
@MattsAwesomeStuff5 жыл бұрын
Anthropomorphucked. I paid my electrician to sign the papers and let me do my own work on a building once rather than use his own guys. Basically just showed up and took a cheque, and told me to flip my receptacles around so they look like happy faces. I was like, naw, I like them the way they were supposed to be installed. He said it wouldn't pass inspection. I wasn't sure if he was a hat-fucker but I did give him some suggestions before rotating them in the entire building.
@John_Ridley5 жыл бұрын
I install all mine ground side up and have not heard a thing from the inspectors, but if I've learned one thing, it's that electrical inspectors are random as frig. Hell we have a county nearby where a buddy does house restoration, and they have two electrical inspectors that have mutually contradictory personal preferences. If you do it exactly the way one of them wants, the other one won't pass you, and vice versa.
@arduinoversusevil20255 жыл бұрын
When the standards don't agree the solution is to make another standard, no?
@ericspda5 жыл бұрын
Its common in larger commercial installs for them to be ground pin up. But almost all residential is ground down, and most light commercial as well. If it wont pass inspection, find a new inspector.
@chasmosaurus35 жыл бұрын
These ground pins are a rather recent innovation (1960's or so). How did you tell if it was upside down before then?
@gvii5 жыл бұрын
Whenever we did residential, we went ground up. But yeah, no doubt that it's all up to how big the stick is in the inspector's dark hole and just how important he feels like being on any given day.
@koz5 жыл бұрын
".. her membrane.. her outer covering... skin." - You sir are an alien and I claim my $5.
@justtime67363 жыл бұрын
His attempt at our language is commendable.
@Deepwaterjew5 жыл бұрын
"Due to the water on her membrane, her outer covering, skin you call that." That line made me choke on a hotdog man... Jeslus
@ryanbaxter27195 жыл бұрын
Wording
@brokenacoustic5 жыл бұрын
"You need to baby-proof the electrical outlets." "I'll just draw bunny faces on them." "Shes not afraid of bunnies." "She will be..." ~The Simpsons
@Chrissy46054 жыл бұрын
Ever try to use a DMM on one of those, "Baby Proof", outlets? try it some time!!!
@zuthalsoraniz67645 жыл бұрын
4:20 With the European plug type (CEE 7/16 "Europlug", and at least also the German CEE 7/4 "Schuko"), that problem is solved by having the outlet recessed into the wall by a little more than the length of the prongs, and having about the half of the prongs that is closer to the plug body isolated - that way, you never have any live metal parts exposed during any moment of the plug being plugged in.
@signlsirchir21565 жыл бұрын
the angle of the drums side dangles makes me think the sprag clutch is for twistin the sand paper tube off.
@arduinoversusevil20255 жыл бұрын
oooooo good call!
@amandacyr15 жыл бұрын
I’ll bet you’re right .
@danthemancasey5 жыл бұрын
Hmm. IDK looks like at 21:02 that drum adapter just spins on spindle, doesn't seem to be affixed by the clutch.
@MysticalDork5 жыл бұрын
You'd have to spin it the other way to get it off. The clutch may either have some hysteresis and not always engage, or it may only lock-up in the off direction.
@murraybooth39555 жыл бұрын
Could be to stop the back thrust when you stop the tool, like the overrunning clutch on a diesel engine alternator?
@StanislavG.5 жыл бұрын
"Never drink the bottom, that's where The Hangover lives" :)))
@johnpossum5565 жыл бұрын
That's where the yeast usually settles to, that's why. Expired yeast isn't particularly useful to the human body unless you believe all the people eating yeast for nutrition.
@pyalot5 жыл бұрын
I have one of these, the reason for the one way rotation lock is because there is an attachment for hard rollers, where you slide an abrasive tube onto a rubber mandrel. the mandrel is grooved with a slant such that if you rotate it against the locking direction it goes on/off easy, but if you perform work it grips the abrasive tube on the mandrel. So instead of banging your gorilla palm onto a squishy paper tube, you put it on the tool and smartly rotate it in place.
@tamasnaftz98795 жыл бұрын
As somebody already mentioned: reason for the autolock is for the user can remove the sanding sheet from the drum sander attachment and put a new one on. Also the wire clip is not holding down the PCBA, there are ribs for that in the cover housing. The leg is just holding the distance from the panel. The brush holders also supported by ribs in both housing shells.
@TheGamingSabre5 жыл бұрын
Love to see a comparison between a Bosch green (home-gamer) tool against their blue (professional) series. Maybe compare their psr against the gsr drill, and find out what justifies the blue colour and throbbing rights.
@Shaun.Stephens5 жыл бұрын
The main difference between the green and the blue is the blue is double the price to cover claims under the doubled warranty. I've always said green is just fine if the person using the tool is the person who paid for it. Blue is for if you're letting the hired help use them and might need to claim on the warranty.
@DrakkarCalethiel5 жыл бұрын
A friend uses the Bosch Blue (Pro Line) heavily since years at work and had no complains. Must be reasonably skookum.
@ColtaineCrows5 жыл бұрын
Except that the innards of the Green and Blue line of tools actually are different. Well, at least they used to be, haven't checked the more recent stuff. Then again I've always had the worst luck with Bosch drills, but always the best luck with Bosch grinders.
@Shaun.Stephens5 жыл бұрын
+ColtaineCrows Yeah some of the innards are different sometimes (I did say the 'main difference...') but not a lot IME. I'm using a Bosch green cordless drill at the moment, a PSR 18 LI-2 (but a blue grinder because it was on sale) and the drill's been flawless for a couple of years now. It's a joy to use, sits in the hand nicely, is rigid as hell and has the grunt to tweak my wrist if I'm not careful. The blue grinder has a plastic cover for the gearbox and started leaking lubricant from the first week of use.
@Lenny-kt2th5 жыл бұрын
Over here in Europe, Bosch green competes with Black&Decker, and basically they are the most prominent A-brands when it comes to consumer tools. Below is the utter crap, above is the prosumer/pro market. Bosch blue belongs to the latter. No point in comparing Bosch green and blue... despite carrying the same brand, they are different animals.
@mavos12115 жыл бұрын
5am in London and I am just about to put my weary head to my pillow for some well earned sleep and I spy another glorious production from the Empire of Dirt... looks like sleeping will have to wait!
@MichaelSteeves5 жыл бұрын
The Canadian Electrical code (CSA C22.2) doesn't specify which way is "up" on a standard 120 V receptacle. Hospitals often specify that the ground pin is "up" because they use metal outlet covers which have been known to lose their retaining screw and fall down only a plug.
@FranciscoJimenez-bb7fk5 жыл бұрын
due diligence, ground plug up?
@ptester15 жыл бұрын
I work in a hospital and the ground pins are all down! I've heard 2 philosophies: Ground pin up keeps things from shorting out across the leads. Conversely, having the ground pin down is more stable and less likely to fall out.
@erik618015 жыл бұрын
thanks for the brain wrinkle =]
@lut5ch3r5 жыл бұрын
without bragging about it, none of the pins can be contacted on a "security contact plug" (Schutzkontaktstecker) the germans use while being contacted to line, zero and ground
@benvaun13305 жыл бұрын
The hospital I used to work in the white plugs (non critical, if the power goes out there is a power interruption for the ups to kick in, .5 to 1 second) were ground down and the red plugs (critical power which draws off the UPS constantly so there is no interruption) was ground up. I'm honestly not sure why.
@erg0centric5 жыл бұрын
Thanks, man! I asked an ESA inspector and he said upside-downing the outlet was not required by code. I have been searching for a reason for decades. I think the best way, for evolutionary purposes, is to install them sideways, live up.
@kinetkraygunn94324 жыл бұрын
The aluminium effect you were looking for was brußhed. Used to do it with wire wool for straight grain, and random orbital pad sander for a more subtle grain
@robhimself795 жыл бұрын
That's one hell of a back scratcher... Or ball scratcher if you're trimmed up proper.
@kyleteodecki74785 жыл бұрын
robhimself79 castration with a drum sander does not sound like a good time
@jeremy4995 жыл бұрын
Men and beer: The good ones need tools. The bad ones? They just screw off.
@madFive95 жыл бұрын
My favorite quote from AvE to date, sums up the majority of his videos: "You get a hired hand on this thing, and he'll let the smoke out pretty damned quick."
@JaredBartimus5 жыл бұрын
I am surprised you don't have a hacked together NEMA 240 plug to European outlet extension cord yet
@patricelebrasseur56495 жыл бұрын
he already have a nema 6-50r for is welder
@BrokenCarbide5 жыл бұрын
8 amp rated tool, 50 amp breaker? What could go wrong?
@pbgd35 жыл бұрын
James Tomblin Ive never conzidered that a real risk. Plug sub ampere accessories into 15 amp recep. All the time. I'd just use a surge barrrr
@caver15 жыл бұрын
50amp at 240volts?!! I thought you guys used them for Dryers, not Welders! Mean while - you can put a lower fuse in the middle somewhere :) I wonder how a RCD would work on 60Hz?
@JacobSanger5 жыл бұрын
30A 4 wire for dryers, 50A 3 wire for most welders. But code gets crazy for multiple welders on the same circuit.
@IkaraPentiki5 жыл бұрын
I never thought the outlet was a cute face, more like a slightly bewildered and slightly appalled face. Also, if you install the plug rightway up, you have an arguably higher chance of getting your diddlers onto a powered lead, as a side effect of human grip geometry.
@orijimi5 жыл бұрын
Ikara Pentiki Also, ground prongs snap off super easy. Having it on top means gravity gets to do most of the work.
@Mostlyharmless19855 жыл бұрын
orijimi I have never seen a ground pin snap from normal use. I’ve seen knuckleheads float the ground on their extension cords with a pair of pliers and a lack of brain cells, but never from normal everyday wear and test.
@orijimi5 жыл бұрын
Mostlyharmless1985 I've removed dozens of ground prongs from outlets that people have just unwittingly left behind.
@Afraithe5 жыл бұрын
Them rocker switches are quite sturdy, had one at my desk for a couple of years, still works fine, relieves stress real nice!
@RideRevival5 жыл бұрын
I feel inclined to point out that it's not made in the Fatherland, but Hungary instead. A simple glance at the label shows that, what with the "made in Hungary" part.
@jostouw43665 жыл бұрын
That's just the label
@MrPaukann5 жыл бұрын
Mark Thompson, HQ are in Stuttgart.
@Positrack5 жыл бұрын
I noticed that too, and right before he said, "you have to read."
@strangelyjamesly40784 жыл бұрын
Adolph always called it The Motherland.
@3RAN7ON4 жыл бұрын
I was today years old when I learned why they flip the three prong outlets upside down
@tncorgi925 жыл бұрын
"That looks like a good job... for somebody else." My thoughts exactly when I peruse the to-do list.
@Dollsofgod5 жыл бұрын
6:10 the tag says "Made in Hungary" though. I'll just assume its the beer kicking in.
@Shaun.Stephens5 жыл бұрын
It sure was! He said the fan would blow the dust from the brushes into that roller bearing when in fact the fan is doing the opposite. Also he was slow to pick up on the fact that the flimsy interior bits (brush holders etc.) are all positively affixed to a rigid PA6-GF30 case and only flimsy when removed.
@lucasmurphy54075 жыл бұрын
15:50 Lmao, " She locks up tighter than a Nuns..."
@julians72685 жыл бұрын
"Choose your beer out of spite" how this isnt a shirt boggles the mind.
@ryan313815 жыл бұрын
I'm so glad you are endorsing the grounding prong up. We use to install receptacles ground up, and many homeowners could not handle it, even after the explanation.
@rikkel875 жыл бұрын
Mr. AvE After being a long term fan of your work I always wanted to let you know what a great guy you are. Letting us know about the enginerding features nowadays and the skookumness of past glory. However, and I say this with a heavy heart. When you said I'll get a beer and you'll get a beer I jumped up to get one. Finally I thought, a quick refill break.. However when amidst my journey to ice cold beheverages I heard your voice. Now in rush to open a freshly chilled blonde one I came back to see you continued your epic story of Borsch green. I guess it's a good thing KZbin still allows a rewind function on a demonetized HERO. My hat is off to you sir. CHEERS!
@maxanator65 жыл бұрын
AvE how do i get ahold of you? I have recently aquired some milling tools and have no use for some of them as i am a diesel mechanic. I was wondering if i could send them to you to be put to good use. Some of which have never seen the light of day brand new tools left in the toolbox in ol grandpappys basement
@bryanjk5 жыл бұрын
Did you ever get ahold of him?
@brandonbenjamin94524 жыл бұрын
MAXAWESOME55 ?
@ludak3574 жыл бұрын
@@brandonbenjamin9452 ToT killed him and took his tools
@brandonbenjamin94524 жыл бұрын
MAXAWESOME55 isn’t it townpumpcnc@hotmail or something?
@bonzainews5 жыл бұрын
Thank you. I needed something interesting to watch tonight. Perfect timing.
@jfkusa1235 жыл бұрын
6 is just the metric for 11
@CraigLumpyLemke5 жыл бұрын
jfkusa123 Except for extremely large values of 11. Thanks - Lumpy
@EdgePrecision5 жыл бұрын
We had a guy in the a shop I worked in (Ages ago). He was machining magnesium plate with the side of a large endmill on the series two Bridgeport mill. He had a extension cord laying across the floor by the mill running a fan. The plug for the fan wasn't completely plugged in. There was a gap between the cord and the plug, enough for one of the shavings to get in. When said shaving did exactly that it shorted caught fire and ignited the whole pile of shavings around the mill on fire. While he was frantically trying to get the lid off the five gallon bucket of powder to throw on the fire (He should have had it opened already but he didn't). Someone grabbed a fire extinguisher off the nearby post and sprayed it on the fire. The only problem was this extinguisher was filled with water (I don't know if the even make them anymore). I will leave it to you to imagine what happened next.
@sonofnone1165 жыл бұрын
The APW (air-pressurized water) extinguisher is my absolute favorite firefighting tool, next to the Irons. Well, absolute favorite, until you get into metals & stuff...in which case, the D/star/yellow extinguishers are quite preferential!
@bill45a15 жыл бұрын
I bet both he and the one with the H2O extinguisher both had full pants, with schmoo running down BOTH legs!!!
@PKMartin5 жыл бұрын
The real problem there is you grab the water extinguisher, think "no, wait, no water on metal fires" and grab the CO2 extinguisher. Then you remember (too late) that magnesium burns in CO2 even better than it burns in air.
@jeremyb71285 жыл бұрын
mmm water on a mag fire,. bet that was awesome,. where's the hot dogs
@EdgePrecision5 жыл бұрын
Yes about three people got over there with some halon extinguishers (Not the proper one) and blew the shavings around enough so the fire went out. The mill wasn't damaged just some paint. They did have to evacuate the whole shop for about two hours till the smoke cleared. After that the owners of the shop had the fire department come out and show us how to handle a Magnesium fire. They built a small Magnesium fire between the buildings outside and demonstrated what each fire extinguisher did to it. It turns out there isn't really a good way to put out a Magnesium all you can do is Contain it. So it doesn't spread and let it burn it self out. There is a special powder you throw on the fire, to in effect bury it. I have herd of people using just plane Portland cement stored on short lengths of 4" PVC pipe with end caps. One glued on and the other just shoved on. If you have a fire you pull the end off the pipe and dump the powder cement on it. I have never done this myself because any Magnesium I ever machined I did it with flood coolant not dry. But it will usually mess up the coolant and cause scale inside the machine. Kind of like bathroom scale you get in your shower at home. After machining Magnesium you have to empty the coolant and clean off that scale (It take's a solution of phosphoric acid diluted in water). Than refill the coolant tank. I don't machine it anymore its to much trouble.
@greaterajax135 жыл бұрын
That label says Made In Hungary, the company is Robert Bosch Power Tools based in Stuttgart. Just picking nits, nothing to see here.
@Sovereign_Citizen_LEO4 жыл бұрын
Bosch has many factories outside of Alemania.
@evilcanofdrpepper5 жыл бұрын
Hey AvE, I remember you did a video the magic wand massager, I have what is essentially the professionals version of it. I have an old American made, hand built, individually tested, Morfam Master Massager model M73-625A in practically new condition. They sell online for one to two hundred dollars so they have to be at least half decent and being that I paid the price of a used 1970's car waxer for it I and it has such a niche buyer pool, I think it seems like it would be worth more as entertainment for me to see what's inside it and hopefully give you another tool to show companies how to make tools right. Shoot me a message or reply to this comment if you want to know more about it or anything.
@acwrobel15 жыл бұрын
Those blue-handled pliers at the end look like my Klein D2000-49 (9 inch) hardened, angled, diagonal cutters. I LOVE those pliers.
@YossarianT5 жыл бұрын
I think "burnished" is the word you were looking for while describing the "sanded" look that this could apply to metals. Great vid though and thanks for what you do!
@gamerpaddy5 жыл бұрын
EU plugs are also deeper into the socket by 1-2cm so you cant ever touch the pins or drop something into even if you find a chinesium plug without isolated pins. atleast the type-F sockets
@ac11dc1105 жыл бұрын
the label says made in Hungary, the man says made in Germany
@1b0x695 жыл бұрын
sahlool he do good at reading
@thedevilinthecircuit14145 жыл бұрын
"Ya have ta READ." I blame beer goggles. Fogs the vision EVERY time! Speaking of 'Made in Hungary', this vidjeo made me hungry. Sammichtime!
@uhhhhh2625 жыл бұрын
Close enough!!
@johnphillip17115 жыл бұрын
Monte Stu - Crap means the Austro Hungarian Empire is back on the rise, seems history is repeating itself out of order. O.o
@mightymoe225 жыл бұрын
Keep em up. I look forward to every video you post. Your work is very much appreciated sir.
@apersonnamedalex9985 жыл бұрын
I just saw one of those in the shop about an hour ago. its really cool to watch you pull it apart. ps there is a plug that looks like that that has a round base just a tad wider than that one is, and two puns for taking up even MORE space
@HarmonHeat5 жыл бұрын
An electrician told me about the upside down outlets years ago. Makes good sense.
@joechurchill80555 жыл бұрын
when you said go get the beer and meet back here I did exactly that I dropped everything and went and got the beer
@ragmachiningruffazguts18345 жыл бұрын
Me too!
@LucasGarrow5 жыл бұрын
Me too, but he got back way faster an me ... Vidjeo nearly over.
@rallymodeller5 жыл бұрын
I can see it being handy for light autobody work -- tonight I could have something like that flap wheel doing some surface rust removal and metal prep.
@StapleCactus5 жыл бұрын
Seems like a pretty useful tool for cleaning mating surfaces for automotive gasket situations, what with the long stick making it easy to reach the oil pan mating surface of the block.
@SuperPsychoDave5 жыл бұрын
The clutch is for when changing sanding paper on the rubber drum, just rotate the paper of the locked drum.
@Barnacules5 жыл бұрын
I can't believe your watched my hiking video man. I'm a huge fan of everything you do! #HighFive
@nicholasfew17965 жыл бұрын
Barnacules Nerdgasm woah
@bernieg24335 жыл бұрын
Barnacules Nerdgasm Of course he has. Almost 1 mil subs btw.
@kingrpriddick5 жыл бұрын
It does seem like he's subscribed to 1 mil channels, I actually miss the old intermissions, I found quite a few good channels from them
@AcidStyle795 жыл бұрын
Jerry mate, start fixing your car with one of these, AvE might send it to you for the STI [wink:wink]
@TravisTerrell5 жыл бұрын
I thoroughly enjoyed the parts washer bit at the end!
@HesTNTonPMS Жыл бұрын
I swear to God, this dude keeps me laughing my damn ass off so much ! far, far better than any television show and on the friggin fly ! beyond brilliant!
@99slacker9999999995 жыл бұрын
The stage below the predator... that would be the prey.
@thomas3165 жыл бұрын
The vegan line? 🤔
@99slacker9999999995 жыл бұрын
the generator @1:06
@Wirenfeldt19905 жыл бұрын
Ha.. clever fucker..
@lawrencetoddverrnier3025 жыл бұрын
in quebec we mount them ground up. because we are a unique and distinct society.
@lawrencetoddverrnier3025 жыл бұрын
i'm sorry, i have no idea what that means. can you further elucidate?
@deathcogunit1065 жыл бұрын
I am a worried neighbor, I hear slurping sounds, panting, peanut butter jars, and barking all night.
@joncampbell86655 жыл бұрын
Lawrence todd Verrnier ya unique lets keep it at that😏
@MrJFoster19845 жыл бұрын
UK is Ground up with nice solid square pins not like the absolute wank they have here is AUS which is so flimsy you look at it the wrong way and it shits itself with the earth at the bottom
@andymoore57715 жыл бұрын
Best argument I ever heard for ground up plugs was from an old contractor I worked with. If the cord takes a downward load, (most likely senario) the weakest part of the plastic receptical is the part between the ground hole and the edge of the plug-in. Once that breaks it makes the whole thing loose. In ground up orientation your much less likely to break that... Keeps the plug tight...contacts made..more safer. Cheers
@russhellmy5 жыл бұрын
The surface finish you're thinking of is called "hair line". It is not applied with sand paper but rollers made of a 3M buffing pad type material. Polytex makes a professional version of this tool. Have one in my workshop for polishing stainless welds, it's 18th birthday this year and still going strong.
@timhess34054 жыл бұрын
Hello I am a German and I love how you say,, mein Gott "
@adnanmlivo58855 жыл бұрын
21:38 That's why i got a black mamba! Reaches in the deapest of holes but not the tight ones!
@ronrico2620 Жыл бұрын
We had bicycle inner brake cable attached to the parts washer great for poking into carbs and such. The new guy flipped it behind the machine out of the way. It laid across the plug wires and it starting sparking. It gave him an HR approved foot shove away. Luckily the cable gave a short and kept falling away from the angry pixie receptacle.
@awashbowler5 жыл бұрын
It is a surface conditioner... not a grinder. It's not meant to remove lots of metal. These are used mostly for autobody surface prep.
@codysett15 жыл бұрын
In my hell hot box of a state in houses if a outlet is upside down that's a tall tell sign that its connected to a switch.
@moconnell6635 жыл бұрын
In mine all the switched outlets were ungrounded two-pole (not old, just ungrounded), presumably so that you would only plug a lamp into the switched outlet.
@conantdog5 жыл бұрын
I always refer to my blue bosch jigsaws Barrel grip and handle grip as the almighty jigsaw because with the right blade you can slice ,nibble, abrade ,and saw through most materials on the job whether it's a copper pipe or steel or stainless because you don't have anything else to do it with in the truck or the one dedicated tool you have to do it is broken and you didn't realize it till the only alternative was the bosch jigsaw and a special blade . There is even a table made by Bosch where you can invert a jigsaw and use it in various ways Iike a rip or scroll saw. I wouldn't buy anything green, there made for homeowners obviously but thats a interesting light-duty tool for Sanding metal tubes and welded shapes and for curved Furniture parts but only in a small low production environment. Not Union shop filled with hard drinking hard smoking hard-driving Gorillaz , oh that weigh 200 lb. It's amazing how tool design has changed to all this electronics and lightweight design you do a great job at pointing it out and giving it some context. I found with the old boss jigsaws that they'd knock after a couple years or so of service and you could pull the front cover off and slap some grease on it and it sounded new ! The same holds true for Milwaukee Sawzall lubrication. great design. 30 years old which seems impossible but I think about it and I've never done brushes or anything except for replacing the steel or the aluminum bases that i have bent or broken because I've dropped them many times on jobs or in the shop alot of the time from kicking the cord. Recently I bought a DeWalt battery jigsaw to avoid the problems of a cord. I've used it some it's very convenient but it's just a lot different going to corded heavy duty jigsaw. . Keep the videos coming. 👍😯
@marshalthompson81925 жыл бұрын
You videos are perfect for sharing. They can be viewed easily from any angle. ;)
@rustiemenard39455 жыл бұрын
the sprag clutch is there to prevent premature wear on the first drive gear. the drum on the end will have enough momentum to turn the motor (when power is disconnected), which is undesirable when using offset gear angles such as those. see that style work in components from older aircraft parts. (been in the aero field many years). most recently on a flap track gear box.
@shurdi35 жыл бұрын
Was that a remix of the Inspector Gadget theme song at the end?
@corythomas44275 жыл бұрын
Kinda sounded like it to me. I would like to know what it is as well!
@90msg905 жыл бұрын
Jeremy Blake - Turn Up, Let's Go
@f.demascio18575 жыл бұрын
Entered the comment zone to find the answer to that very question. Thanks fer askin'. Thanks fer ans'rin.
@Henchman_Holding_Wrench5 жыл бұрын
Once that 80 grit went on, I thought, "rotary tool on steroids".
@Giblet5355 жыл бұрын
Way back, I recall that 3-Prong outlet installation orientation were supposed to be addressed in the NEC code. Never heard whether it ever was, but US electricians are still taught to install them with the ground lug on the bottom.
@FearsomeWarrior5 жыл бұрын
You got a gleeful giggle out of me when you talked about Mr Chamfer. Your subtlety and passing right past those chiclets are my favorite ones.
@Andrewlang905 жыл бұрын
I’ve been amazed at the vast wealth of knowledge of Uncle Bumblefuck. But, that said......I didn’t know he could stumble over a term like “skin”.
@nameredacted61115 жыл бұрын
"gota be a cool dude ta use it" that had me lol"in somethin awful
@dkeith452 жыл бұрын
DAMN! TIL and it makes complete sense. I've been installing electrical outlets the wrong way! It took a cheeky Canuk to learn me proper!
@jjaska5 жыл бұрын
Minor detail: That actually was the real CE certification mark and not China Exports, the letters were further apart. Thanks for another great video!
@toddlaplanteVT855 жыл бұрын
"Tell the wife that you can never have to many tools for getting into tight spots.. BUT it has limited use" Story of my life
@rc2300s2r5 жыл бұрын
“Her outer covering”🤣
@deepsquat6005 жыл бұрын
in regards to our 120v plugs ..one feature that manufactures seem to be doing more and more.. is building a wide top of plastic BEFORE you get to the prongs ..so to touch the prongs you almost have to do it on purpose but back when I was a kid I did manage to zap myself with a device what had a small plug ..I can still feel it :)
@timothyrobery97695 жыл бұрын
Use to have a local inspector that would make us turn the receptacles upside down. The odds of something falling between the prongs is slim to none in my opinion.
@dalltex5 жыл бұрын
Wife isn’t here so might as well watch the next best thing. ✌🏼
@andrewfunk91675 жыл бұрын
Grounding port on bottom is better because if the cord is falling out it, the last connection to break is the grounding wire. There is no code in USA for this however. This will be an argument for the rest of my career.
@gavster895 жыл бұрын
Andrew Funk that's why it's longest
@mon0railbredpig5 жыл бұрын
If something fell in behind the plug then it would short out and trip the breaker. The neutral is still grounded anyway. If someone has wet fingers they still have equal chance of contacting the live prong regardless of orientation of the socket.
@AntonioClaudioMichael5 жыл бұрын
Love the piston bottle opener
@jkmesh5 жыл бұрын
Get some Bosch blue! Here in america we only get the blue "professional" grade. I would love to see some Bosch blue make it into a BOLTR
@leonk.10314 жыл бұрын
jack You only get the cheaper blue stuff here in Europe we also have very high quality blue Bosch tools
@Apomber5 жыл бұрын
Does the vibrating can with the airplane toilet water in it really vibrate at a frequency high enough that it doesn't require an abrasive medium?
@rs21985 жыл бұрын
adrian pomber i think that’s why you add the airplane toilet water, although it might be port-a-potty grade
@Apomber5 жыл бұрын
Rafael Sherman that makes sense too.
@recklessroges5 жыл бұрын
Water is abrasive; just ask the grand canyon.
@sugarbooty5 жыл бұрын
Reckless Roges if I'm not mistaken, water is a solvent, not an abrasive. The rocks and sand that the water carried down the river was abrasive.
@Worrsaint5 жыл бұрын
No. The reason they use ultrasonic in the cleaners is because it creates high velocity steam jets to scrub parts. The cleaning solution gets heated to a little below the boiling point to aid in the happening. Imagine a bunch of tiny steam blasters and pressure washers. Now if you have a bunch of parts in there (nuts and bolts) banging and clanking together the vibration does help.
@petergerkens60455 жыл бұрын
Hahaha You on our top-list guys who is so honest and funny when you "test" products. Love this! :D And you know what you talking about, that's make it even more funnier and informative.
@bar100055 жыл бұрын
As for the euro plug and safety: not only pins are partly insulated (on new plugs), but also all sockets are recessed, so even if the pin is uninsulated before you can touch it, the circuit is typically already broken.
@whollymindless5 жыл бұрын
*Must. Not. Comment. On. Outro....*.. . Screw it. Did the wife come running in asking "What are you doing with my..."
@SouthernSaint865 жыл бұрын
Wholly Mindless vageen refiner?
@whollymindless5 жыл бұрын
A Nether-Trasher 2000. Get the 2500, runs on two stoke, hides the smell.
@rickmyers37165 жыл бұрын
Wholly Mindless .. think hers is the yellow one...
@PapaWheelie15 жыл бұрын
Wholly Mindless - tooth rattler?
@biguprochester5 жыл бұрын
Those work for resurfacing stainless sinks.
@gravelcreekfarms38505 жыл бұрын
Finally some sense on outlet position I’ve always installed ground lug up and people argue that I’m wrong they can suck it
@ohzzapliskin70305 жыл бұрын
Egad, I've always wanted something like this to put the brushed finish back into stainless steel sinks and whatnot. The fact that you figured out that this is what it would be perfect for makes it look like I'm trying to fondle you strangely, but I really have put thought into picking up a $900 handheld drum sander for the purpose.
@davidhelmuth76545 жыл бұрын
Moose head beer ain’t that bad, it’s no PBR , but hey... 😱😱😱
@SodomySnake5 жыл бұрын
I'm a mechanic. The proper kind, not the fancy kind. You know the type: dirty concrete floors, tools and parts strewn everywhere, posters of partially-dressed girls holding overpriced tools. We have easily 10 or 15 worn out receptacles with cobbled-together extension cords hanging halfway out positioned about the shop, and so far nothing's ever gotten dropped into one, not tools or offcuts or fingers or anything. Now that I've said that, it'll probably happen next week...
@hartsockthomson33345 жыл бұрын
Like it usually does. We have a very specific proverb for that "phenomenon" here in Greece.
@briguybby9445 жыл бұрын
A ‘proper’ mechanic has their tools and parts organized, not strewn about. I’ll bet you’re not very busy.
@thefordmaniac5 жыл бұрын
Brian Golob no...that means one has too much time to organize
@huemanatie43925 жыл бұрын
If it can happen, it will happen.
@NskLabs5 жыл бұрын
Fully aware of risking being boring, at 13:00 actually it is a helical geometry, it's how helical gears are made, see pfauter. Sorry for the post and thank You for all the free stuff.
@whitacrebespoke5 жыл бұрын
In U.K. we have 3pin plugs, they are the other way up with the earth up top. Our plugs have a specific size they have to be too to reduce chance of touching half engaged pins. That with the plastic sheathing makes them fairly safe
@evilutionltd5 жыл бұрын
Takes the internals out of a rigid shell, complains that the internals aren’t rigid.
@carlalm61005 жыл бұрын
"120 Amps" =)
@plasmaman95924 жыл бұрын
That tool is amazing for cleaning up a 3d wood carving and v carve signs when used with a soft bristle wheel. It can clean crevices you cannot get to with sandpaper
@mikeyp19775 жыл бұрын
I have some of those mini bolt cutters from knipex. Absolutely awesome 👍
@dalltex5 жыл бұрын
Who drops things between a plug half inserted and the receptacle?? Kind of a Darwin moment if ya ask me.
@FlesHBoX5 жыл бұрын
When I was like... 8 or 9 years old I was curious and dropped a penny onto the exposed plug ends, lol. Freaked me out when it popped the breaker, but I kept that penny with a notch burned out of it for many years.
@GoldSrc_5 жыл бұрын
the sparks are pretty lol.
@sugarbooty5 жыл бұрын
A proper design is safe, effective, and easy to use. I think most plugs have the easy to use part down, but others won't pull out of your wall with a little waggling and/or are much safer in the event of an unlikely or likely occurrence. Like accidentally touching the pins while pulling it out.
@stanwooddave97585 жыл бұрын
You guy's are cheap-skates, I used a quarter (American coin) thinking it would either stop the train, or at least derail. That sucker, was extra BIG & FLAT, but the train keep going. I was very disappointed, but I keep that coin for a very long time.
@bernieg24335 жыл бұрын
At 5 years old i found that a hacksaw blade fits perfectly in a 220 plug.
@evil00horse5 жыл бұрын
I think a pneumatic vibrator is the only safe one for the bath.
@rs21985 жыл бұрын
Aaron Adams honey I’m going to take a bath... Brrrrrrrrrrrnrnnrnrnrnrnrrr....... Fffffffvveeeeeeeeeeerrrrrdrdrrrrrrrrr
@jostouw43665 жыл бұрын
yeah but all those bubbles
@mrmaigo5 жыл бұрын
They make some cute tools, perfect for the itch I got down back.
@TBrady5 жыл бұрын
"At full stall we're only getting a hundred and twenty amps, which is dead nuts on the label" That's strange, because that doesn't look like 2 awg wire to me.
@mortlet51805 жыл бұрын
Brady Tribble; Yeah but remember it's 120A @ 240V not 120V. And the wiring is also metrique, so 2AWG ~= 2mm^2 XD
@mattholmes82145 жыл бұрын
MRLT 120 Amps is 120 Amps, regardless of voltage. It needs bigger wire or it melts. Using higher voltage means more power without more current.
@ConorNoakes5 жыл бұрын
You’re forgetting how much more protection European domestic mains has compared to North America... You’ll bang out the 20A circuit breaker (Mainland Europe) LONG before the cable gets hot in a prolonged stall environment
@JusttheEdge5 жыл бұрын
Brady Tribble he obviously meant watts since that's what the kill-a-watt was set to he was reading.
@FerdinandFake5 жыл бұрын
Most euro outlets are only on a 16A breaker, plenty of juice at 230v
@tomschlachet43105 жыл бұрын
Always seek the advice of a professional when dealing with a green tool.
@bryankirk35672 жыл бұрын
@16:33 The fan is NOT blowing "in here". It's centrifugal, so it is creating a slightly negative pressure "in here". This will get rid of any "graphite grinding dust" that may be lurking to pounce on the rear bearing.
@MaLiXs885 жыл бұрын
OMG this copper bottle opener is a piece of art!!! I would like to have one like that and polish it like hell !!!
@EternalResonance5 жыл бұрын
than nuns😂
@alexhickey56335 жыл бұрын
EternalResonance locked up tighter than a nuns pussay