Survives a torque-down against another drill; survives several hard drops from a great height; dies from a screwdriver in the hands of Uncle Bumblefuck.
@martinxXsuto4 жыл бұрын
to be fair, idiots are a huge threat to every tool
@PS3PS3PS3PS34 жыл бұрын
what's the hack to taking out a broken bit in ur makita impact beast?
@deimosian4 жыл бұрын
@Vivian Stimpson That's why Snap-On is so expensive, they're warrantying the dumbfuckery.
@PS3PS3PS3PS34 жыл бұрын
strong magnet while pulling the collet back😮
@frogz4 жыл бұрын
@@PS3PS3PS3PS3 or just pull the collet and tappy tap tap it on something
@ZspotMotorsport4 жыл бұрын
Can we just take a moment and appreciate that Uncle Bumblefuck adjusts the audio levels for us so we don't have to? I shoulda said it long ago, but thanks for that. Much appreciated.
@leadingseamanphilbillingto1004 жыл бұрын
A true leg end. Hate having to adjust volume all the time.
@tjeick4 жыл бұрын
Why can’t other youtubers figure this out? Even old timers like EricTheCarGuy can’t seem to do it
@glamiskid3954 жыл бұрын
My LG phone does it when recording videos in loud environments. Probably cuz AVE uses good cameras 🤘
@snowmobile744 жыл бұрын
Aye, a true hero!
@GregsStoneYard4 жыл бұрын
@@tjeick I do it on my videos (well most). It's because it is a tedious time consuming process, and you have to be a-n-a-l about it.
@bansheemania16924 жыл бұрын
These are the "Power tools" that I lend to my Brother in-law
@Normjohanson4 жыл бұрын
Or apprentice 😉
@mackjones76884 жыл бұрын
Only tools I loan to anyone can be found in the toy section of Wal Mart or Target. Not even the tools I cherry pick from Harbor Freight deserve the death I know will be granted by someone audacious enough to ask to borrow from me.
@sirjacobanderson4 жыл бұрын
My brother in law buys Ryobi
@Darndiddlyarn4 жыл бұрын
@@sirjacobanderson I buy ryobi and thrash the crap out of it, so far the only the only thing that's died was the grinder, and that was killed by the mrs.
@JC-XL3 жыл бұрын
... and he still makes a better job than you 😂 😂
@user-gx6jb6wc5g4 жыл бұрын
Quite an easy motor to rewind given the total lack of turns. Looks pretty good.
@squib3084 жыл бұрын
[returns desk] "It died the first time I used it, I guess give me another one instead of a refund"
@squatchhammer72154 жыл бұрын
"How do you spend your Saturday?" "Watching a full grown man playing with his turquoise vibrator destroy the fake turquoise vibrator."
@EliteGeeks4 жыл бұрын
"How do you spend your Sunday?" "Watching a full-grown man playing with his turquoise vibrator destroy the fake turquoise vibrator. again"
@jordanledrick33974 жыл бұрын
It’s teal
@jordanledrick33974 жыл бұрын
It’s teal not turquoise
@jordanledrick33974 жыл бұрын
It’s teal not turquoise
@randymiracle49584 жыл бұрын
@@jordanledrick3397 Minor dicktails
@TheStp774 жыл бұрын
Imagine the tool quality if they threw another 10$ at it in the factory 😳
@avinci31164 жыл бұрын
Would beat a Hilti
@SIkRiILLeX4 жыл бұрын
Borderline mining equipment!
@slowstang883 жыл бұрын
Heritage tools like my grampas old enormous hand tools
@user-fo2vr5qz2l3 жыл бұрын
Ahahahah you're totally right))
@sparklesparklesparkle63183 жыл бұрын
i miss pre2020 AVE. so cozy
@w0mblemania4 жыл бұрын
"23 Day Buyer Protection" That seems oddly specific.
@TonyFleetwood4 жыл бұрын
R.I.P fakita. 2019-2019
@EliteGeeks4 жыл бұрын
So cheap that if you Cut off one head, two will take their place! Hail Hydra!
@mitchalwaggoner16484 жыл бұрын
Frankenstein the parts on the Makita when it breaks down for more surprises.
@bacaw28564 жыл бұрын
fajita*
@anchoriticparliament63434 жыл бұрын
*Fuckita
@kpanic234 жыл бұрын
*Fakeita
@4pharaoh4 жыл бұрын
Just like my neighbour when I lend him a tool; "It just stopped working, I don't know why...."
@georgemcmillan91724 жыл бұрын
That struggle is real...
@tiredoldmechanic17914 жыл бұрын
Is AVE your neighbor?
@raymondmucklow37934 жыл бұрын
@@tiredoldmechanic1791 right, how mad would ya be lend the neighbor your latest tool, come to find out he tore it apart and gave it a review. 😁
@WeldinMike274 жыл бұрын
Don't lend your wife, tools or chainsaw.... They'll come back fucked
@4pharaoh4 жыл бұрын
I told my kids, never borrow a tool you can't afford to buy, cuz if you can't return it in better shape than when you borrowed if...buy 'em a new identical one.
@Chris-wp3ew4 жыл бұрын
I ordered one when I first watched this review (Dec 7 2019)... I'd forgotten I even ordered it. It arrived today... I paid $33.79 (inc .14 cent shipping)... It's really nice.... Thanks again for the heads up.
@muffinhater694 жыл бұрын
Chris what’s the site
@dexty324 жыл бұрын
@@muffinhater69 aliexpress
@tombal74084 жыл бұрын
I was thinking on buying one, any updates? It still works?
@bastarddoggy4 жыл бұрын
Entertainment value is high on this one. I did laugh out loud when you finally got it to chooch and it kept on chooching when you let go of the trigger!
@benhitchcock30574 жыл бұрын
Note, the lack of hall effect sensors doesn't mean it's open loop control, the ESC reads the voltage coming back from the coils (once the MOSFETs are off) to determine the actual position / speed of the motor. If this wasn't the case, then when the motor started to get under load it would lose sync completely. Model aeroplane 3 phase motors are the same (no hall effect sensors) and they work fine in sensing the load, and adjusting the frequency accordingly.
@JJJulie-t7e4 жыл бұрын
It's a terrible solution for motors that start under load. You can actually initially rotate in the wrong direction, and applying full power is generally not a good idea. It's cheap though! However, that rotor looked weird to me. Was this brushless PM or induction? I guess each slice could have been a polarized magnet.... In induction, you need a current path (the cage). Or maybe VSR...
@johngaltline99334 жыл бұрын
@@JJJulie-t7e Nothing wrong with using back EMF for sensing. It's not as good as using hall effect sensors, but it's cheap and easy with modern uP's. It will get the business done plenty good enough for a hand drill.
@brainndamage4 жыл бұрын
It's not applying full torque from 0 in an instant. It ramps up the speed open-loop until it can sense enoucg back-EMF to switch into closed loop.
@carpespasm4 жыл бұрын
Commercial treadmill motors work this way too.
@nraynaud4 жыл бұрын
@@JJJulie-t7e I think there is enough play in the gearbox to get a reading before the load is applied.
@shootthemoon60724 жыл бұрын
A hundred years from now, when discussing art, this will be known as "aVe(s) ladder period.
@AccAkut19874 жыл бұрын
....does he do that? :(
@silverado09384 жыл бұрын
killsalot78 so I’m not crazy. I was looking for an old video and I drove my self crazy trying to find it.
@encorespod21354 жыл бұрын
"Mockita"
@usergonemad4 жыл бұрын
Having seen the innards of this, I kind of feel bad about the abuse it got. For the home gamer it seems really fantastic, even if counterfeit. If they'd branded it themselves it'd be the best deal ever to cross this channel.
@MrKeneal03304 жыл бұрын
"If there's a glare, tilt your head" I spilt my coffee, man!
@scruffy61514 жыл бұрын
I wonder how many tip there heads lol
@MrKeneal03304 жыл бұрын
@@scruffy6151 Oh you know more than one at least tilted their phone screen.
@notchagrandpa88754 жыл бұрын
Drink beer next time, they're cold no second degree burns.
@scruffy61514 жыл бұрын
@@MrKeneal0330 I am to slow to think of doing something like that. Age has it plus sides Oh,wait what was I talking about lol.
@pegtooth20064 жыл бұрын
@@scruffy6151 we were saying something about aluminium pots or cans
@calvin7204 жыл бұрын
did the cruise control mod, i like it
@tacomas96024 жыл бұрын
Wait what?
@pegtooth20064 жыл бұрын
@Calvin mais si, señior
@0xsergy4 жыл бұрын
@@tacomas9602 ye, wrap the seatbelt thru the steering wheel, been doing it for years
@wyattroncin9414 жыл бұрын
@@0xsergy that's autopilot. cruise control is putting a "high idle" brick on the gas.
@christopherTheCarpenter4 жыл бұрын
I cant stop watching these videos, fantastic, the review itself is superb, then adding your vocabulary is just the finishing topping for perfection. I was a 20 year union carpenter in Chicago and i love what your doing.
@stonent4 жыл бұрын
19:34 Uh oh, throw a shop rag into the intake, she's gone run-away!
@Wulable4 жыл бұрын
When the driver kept running after you let go of the trigger I laughed so hard.
@alf30714 жыл бұрын
the machines are waking up
@MegaBullet504 жыл бұрын
same. totally unexpected
@grumpy_ken4 жыл бұрын
this thing just called me an asshole!
@bobdance98464 жыл бұрын
we've all been there at some point
@bunzeebear29732 жыл бұрын
That would could have the blue tooth to it; as you go for coffee that thing is just screaming along by itself on AUTO WORK MODE. The only way I know how to fix it is drop of a 13 foot high ladder
@lag_profil4 жыл бұрын
Who doesn't appreciate a nice solid bush with a slot for lubricating?
@nanobrad4 жыл бұрын
Underrated comment... 👅
@kippanb-lund38804 жыл бұрын
Hahaha eller hur 😎
@caseydrach70674 жыл бұрын
Me trying to watch this in class, ave starts reading description on website, me starts cracking up in the middle of class and everyone starts looking at me
@DrLumpy3 жыл бұрын
I hope you're not in something like dental school.
@valhallajones38654 жыл бұрын
"So aluminum, not that great at being a gear."
@alexmills13292 жыл бұрын
Say it again for Bosch to hear
@anthonywitham23054 жыл бұрын
"Make it cheap and good" and don't let AvE take it apart! 😄
@needleonthevinyl4 жыл бұрын
"Chock full o fiber, like Kellogg's sanitarium"
@LilMissMurder34094 жыл бұрын
I know, right? XD
@rustybottoms88594 жыл бұрын
Historically accurate.
@drewfausett53884 жыл бұрын
tool launches itself into orbit..."that's interesting... "
@jimhellyeah80214 жыл бұрын
I've got one of these in yellow for a laugh and nearly 2years on its still ripping nuts and bolts apart 🤣
@chrisedwards38664 жыл бұрын
I'd love to see you order a 2nd one, then take it apart to see if it has the same internals. Maybe order some other tools from them too, if the seller can get it from the same supplier. I wouldn't be surprised if those molds are owned by company with a real brand name. You can make great reinforced plastic when someone else pays for the extra replacement molds.
@AaBB-ks6oc4 жыл бұрын
@@VictorVonVulfgang The real version of this wrench (XWT11) has a bell housing cap held on with 2 screws. So it's likely this is a different mold. Or one that was modified to make the end product a little easier to make. Idk. .
@AaBB-ks6oc4 жыл бұрын
the one I bought uses sealed bearings on the rotor. The ones in this video are shielded. So yeah, there's likely a real hodge podge of parts being used to turn out all the counterfeit impact wrenches. Everything appears to be a cheap clone of the real deal, from the switch (Omron in the Makita) the connectors, the LED light, the ESC and the battery rail. The gear housing and transmission are as close to OEM as it gets. And I wouldn't be surprised if those are being stolen right off of a Makita assembly line.
@TheLexiconDevils4 жыл бұрын
The 12v stuff is cute ... and great for putting in RC cars
@rasz4 жыл бұрын
design patent - covers shape, color, smell etc
@h3llblaz3r124 жыл бұрын
What usually happens is name brands goes to China for production and has 8-12 manufacturers turn out a test batch and than give contract to the best 3-5 manufactures and fucks off the other 7, but them being china with no patent enforcement, they going to continue pumping out production and sell to the local market/online. This happens with smart phones all the time and honestly they deserve it, if they want to go to china for cheap production than they can take the downsides that come with it.
@loganmerryman2024 жыл бұрын
*gets the tool back together correctly* Me:... AVE: Contact *Tool spools up to a low earth orbit* AVE: Uh Oh Me: HAHAHAHAHAHAHAHAHAHA
@Mett-wt3xj4 жыл бұрын
Laughed my ass off.
@totherarf4 жыл бұрын
Anyone else get a flashback to old StarTrek ...... Phasor set to self destruct?
@MikeCookie19734 жыл бұрын
Me too, man! My daughter was in the other room wondering why I was laughing. A minute later I was laughing again!
@johnpossum5564 жыл бұрын
He should put a scotch brite scrubber end on it then gift it to the wifey for Xmas.
@loonatticat4 жыл бұрын
You spelled “CORNTACT” wrong.
@Wolf_Larsen4 жыл бұрын
So this is what economic warfare looks like, huh.
@myoptik3x1034 жыл бұрын
Captain BaseBallBat-Boy. Yep, and by buying this knock-off shit we are putting the bullets in their guns.
@duminicad4 жыл бұрын
Jason Buck ummm, more like pushing the trigger
@Jan-mu6vs4 жыл бұрын
@@duminicad eating the poison...
@vro18994 жыл бұрын
To be fair, we’re probably selling them at least a few of those guns
@Jan-mu6vs4 жыл бұрын
@@vro1899 there is no arms sales to China. American companies like Google did work on facial recognition software and military software for a military university there...
@GrantSpencer-Purple-Circle4 жыл бұрын
Ebenezer Scrooge working as a hand-model for power-tool teardowns.
@alecjahn4 жыл бұрын
If I had the batteries already I would totally pick one of these up just to see how long it lasts under normal use.
@avlisk4 жыл бұрын
This is AvE's normal use!
@Jaker7884 жыл бұрын
I happen to have Makita batteries. If they had a 1/2 inch impact I'd consider trying it. Since I already have a Makita 1/4 inch impact and drill I don't feel like buying a knockoff of what I have.
@TheMcal99094 жыл бұрын
Quite a few Scaffolders in the UK use these fake Makitas now. The real ones will last around 6 months on site with constant use, the knock off will last about the same with real batteries if you look after it. Big difference in price though. They dont like being dropped as much, mikitas tend to bounce with little damage, these things just split.
@AaBB-ks6oc4 жыл бұрын
@@Jaker788 it's the Makita XWT11. The wrench in this video is a clone of that Makita impact wrench. I've taken both the Chinese fake and the OEM Makita XWT11 apart. The OEM Makita is much nicer. Especially the electronics, motor and trigger switch..
@Stevo_19984 жыл бұрын
@@Jaker788 On the image near the start (4:40 or so) it claims to be a '1/2'' square drive' Maybe it's just the camera putting you off thinking it's a 1/4'' lol
@__WJK__4 жыл бұрын
"Chock full of fiber like a Kellogg Sanitarium" Some days I'd swear there's a staff of writers holed up in the misses sewing room!
@rickw41604 жыл бұрын
Its the old writers from family guy.
@mrjodoe4 жыл бұрын
7:50 - aaaaaand it's gone. I love those "put screwdriver in, twist and bend - to bring it to an end"
@ottersdangerden4 жыл бұрын
Maximum overdrive is one of my favs. Also seeing how cheaply they wereable to make it and still made it work decently. Would be interesting to see if something like this would make it to horrbile freight or one of the other crap place to buy tools.
@thenetwerx4 жыл бұрын
Hahahaha "Tesla's new self-driving drill/driver."
@k5guy4 жыл бұрын
The new Walmart "hart" brand is in need of destruction.
@pinkertonfld4 жыл бұрын
"Hart" is being made by TTI, from what I can tell, they're Cryobi's in White and Blue (WTF?) cases... would be interesting to see them torn apart next to TTI's other lines to see if any price engineering has been done to Walmart's standards... Sad that Hart is another zombie Brand, they made decent Hammers back in the day in the US. (but hey, we still have Estwing at least)
@mrpickles5364 жыл бұрын
I picked up a Hart 1/2” brushless drill on a whim, and, in no small part due to AVE, took it all apart. From what I can tell it‘s skookum. Electricals are tidy with clean solder, metal gear train, smooth trigger with a boot, boards conformally coated, bigass motor, and it went together as easy as it came apart. Looks like it shares its guts with higher end Ryobis
@MikeCookie19734 жыл бұрын
BEST That was the best vid you’ve put out in a while! Even better was when you let poltergeists in instead of letting smoke out! That’s a new skill!
@totbenru4 жыл бұрын
19:35 "oh oh" something you don't wanna be saying when shooting a select fire weapon.
@CameronForbes4 жыл бұрын
Manufacturing a fully auto drill could land you 10 years in the pin kids, don’t try this at home
@zombielinkinpark4 жыл бұрын
Fun fact: Most of shipping cost is subsided by Canadian government under the Universal Postal Union. UPU come up with a set rate that every countries should paid. The EMS postage that being paid by Chinese sellers are well below then the cost of sending the postage to Canada, meaning Canada are covering most of cost for EMS postage that send to them.
@markfergerson21454 жыл бұрын
That's one of the things Trump's trying to change. China's getting a better rate than anyone else because they're "developing".
@boatbeard77674 жыл бұрын
@@markfergerson2145 ...and everyone is buying their crap...
@dangitbobby78874 жыл бұрын
@@markfergerson2145 trump isn't changing shit unless it personally benefits his corrupt ass. That liar doesn't give a flying fuck about you or anyone else, unless they can pad his pockets.
@jon49584 жыл бұрын
i never thought i would like watching a guy fuck around in his shop, love the commentary
@jimidawalt30814 жыл бұрын
“Shipping seems pretty seasonal” Had me dyin! 😂😂😂
@SueBobChicVid4 жыл бұрын
Suitable for construction site... shelves!
@scruffy61514 жыл бұрын
For the apprentice to use.
@dutchgray864 жыл бұрын
You don't want anything to good for when another trade needs to "borrow" your drill.
@jasonbyrd51504 жыл бұрын
The manual is the best thing on these Chinese tools.
@b.a.lineman75824 жыл бұрын
Suitable for construction site shelves🤣😂🤣
@Pyrohawk3 жыл бұрын
19:30 now we know why the fancy pants brands use switches for power instead of pwm control
@w.a.l.72594 жыл бұрын
He left in the part that says “add txt” hahah savage
@TurboTel684 жыл бұрын
I've been running one of these knock off Makitas 6 days a week, for about 6 months, undoing wheel bolts, hub bolts and other heavy stuff. Not killed it yet
@blackscotydog4 жыл бұрын
Where did you get it? I would like to try one.
@TurboTel684 жыл бұрын
blackscotydog got mine off eBay, search for ‘Replace Makita’ there is a whole host of knock-offs, not just the impact guns 👍
@blackscotydog4 жыл бұрын
@@TurboTel68 Thanks I found one for 15.99
@ghettobikelife88334 жыл бұрын
My real makita 1/2” drive will barely loosen a wheel bolt, runs for like 10 secs before it begins to turn
@C4reful2 жыл бұрын
im curious, now 2 years later, how did it hold up ?
@thomasbjerregaard10804 жыл бұрын
Give us more reviews of fake tools.....I ordered one of these after watching this review. ......but, will you please skip the 12ft drop....we learn nothing from it except that it breaks at random....
@jamesfair97514 жыл бұрын
Actually you can learn a lot from the drop. Some of the better brands can hold up to that drop. I’m sure he was expecting it to break but at what point just how durable did they make a $30 Tool.
@lordaleksandre4 жыл бұрын
Thomas Bjerregaard Agreed. You drop tools from high heights either or both of two things might happen: tool will break and you'll get shitcanned.
@scruffy61514 жыл бұрын
Hard to firer oneself.
@Sweetskis4 жыл бұрын
I'd be much more interested in a long term performance report on these knock offs. I've already given the name brands plenty of cash but for a friend who just needs a drill or driver for light home use it would be nice to have them get a $30 tool and have me lend them a Makita battery. The batteries are the first to go on the budget brands anyway.
@kevinglidden37344 жыл бұрын
Thomas Bjerregaard Do you have a link for where you bought it. I’d like to get one myself
@patricks12254 жыл бұрын
The tool not stopping is an amazing feature! it prevents finger fatigue! 😂
@ranchurdhimster49554 жыл бұрын
"GM wouldn't miss just one little piece" -Johnny Cash
@cfeigel4 жыл бұрын
OK, I found this tool on AliExpress, but scanning their offerings has raised a few questions. How about a BOLTR on the "Heimerdinger" 18V rotary hammer! I mean, if we're gonna do this, let's step things up! (also, from the same store: WTH is an "impact grinder"?)
@0x73V144 жыл бұрын
Either it's engrish for brushless grinder, or it actually has an impact driver gearbox and will explode your wheel for funsies
@Sweetskis4 жыл бұрын
I just fully invested in one of the 7 tool Makita sets on the advice of my contractor brother in law. Been loving them. Just saw that Makita is still dedicated to full line battery compatibility for all the 2020 tools coming out!
@StevenDeZalia4 жыл бұрын
I've had to take a file to a few of my tools as the battery slots have been changed for different battery models.
@martinxXsuto4 жыл бұрын
Not to be a shill or anything, but i mostly see makita tools in the hands of contractors here. However that may be because they're a fair bit cheaper than the competitiors (they got a factory in romania, a neighbouring country, so i guess that's less shipping/taxes costs or something)
@libertyman37294 жыл бұрын
Don't know about Makita but when you buy the DeWalt pkgs. THEY ARE NOT the same as if you buy them separately. Google it .
@Sweetskis4 жыл бұрын
@@libertyman3729 I checked before I bought it. All the model numbers were listed and they were the brushless tools they sell individually.
@thomaskrechel4 жыл бұрын
@@StevenDeZalia You probably removed the part that would stop you from using "small" batteries (
@KenShields4 жыл бұрын
Man, this had me howling. When you pressed that button and it kept going I was dying! Good job!
@elmariachi51334 жыл бұрын
The recent Makita batteries also have this capacity indicator. But honestly I think that the knockoff offers a way better bang for the buck than the real thing for many applications, especially when it comes to personal needs. The best thing about it is that it will work forever, as the motor is not in use!
@andybobandy6414 жыл бұрын
Quick! Buy these before they figure out they can get greedy like the Name Brands do and ridiculously mark it up ! .....if these things can do brushless for $30, then why are we spending $300!
@ryanfeldpausch8584 жыл бұрын
Eh, I can get most tools even the name brands for less than 100, especially an impact. It's the batteries that kill ya.
@98ek94 жыл бұрын
The warranty
@AaBB-ks6oc4 жыл бұрын
because they're stealing parts off the Makita assembly line, lol...that's why they're so cheap. And they're certainly not built as good either. I've taken one of these Chinese wrenches apart along with the Makita it's a direct rip of (XWT11.) There is no comparing the two in terms of overall quality, the OEM blows the fake out of the water. The only thing that comes close to OEM is the gear housing and the transmission, and that's because there's a 99% chance they're stealing them right out of a Makita-owned assembly line.
@danielrouw25934 жыл бұрын
@@98ek9 Warantees are over rated. When a product fails and the offending part is just replaced with the same defective crap it becomes useless. Apple has pefected this practice. It ensures a limited lifespan of the product.
@magnum_dingus4 жыл бұрын
Because my name brand tools have survived mishaps that I highly doubt this would. A great deal like $30 does me NFG at all when something goes wrong in the middle of the day and I need the tool to work right then, right there.
@captaincoffeecake35954 жыл бұрын
The clear protective cover is for if it falls in love with a dirty project ....No Glove No Love
@georgemcmillan91724 жыл бұрын
🤣🤣🤣
@JimmydaGooch4 жыл бұрын
The reading of the poorly translated Chinesium is hilarious 🤣
@Hammerjockeyrepair4 жыл бұрын
I am a mobile heavy equip/truck mechanic. I bought another version of the fajita with the 1/2” chuck. It removes lugs off of 3500 series trucks daily and has been doing so since April without a hiccup! I’m gonna buy a few more!
@Adam_Lynn4 жыл бұрын
The extra battety sensor and torque control is available on the higher end makita impact drivers. The have 3 settings plus a self tapping mode.
@bogart2864 жыл бұрын
It's never a good day when the almighty AvE has to resort to the admission of "Uh-Oh!".
@Jusarious4 жыл бұрын
Got a question: Can we get the AvE stickers in magnet form? Stickers require a commitment where as magnets can be relocated to a new metal surface. Okay, one more: Can we still buy the stickers?
@leveticus57212 жыл бұрын
This is the gear test equivalent of putting two bugs in a jar and shaking it so they fight
@potatojz384 жыл бұрын
I really appreciate how you lower the volume during loud testing. I watch so many video where I constantly have to be on the volume to not piss off the girlfriend. Granted she always ask what the hell I'm watching when I watch your videos lol
@DrakkarCalethiel4 жыл бұрын
Hahaha, same when I watch one of his vids and the gf is sewing in the background.
@joekoelker75234 жыл бұрын
The slow speed ramp after reassembly looked like the controller ramping up in open loop and never seeing the expected feedback voltage to switch into closed loop. Feedback inputs maybe fried during reverse rotation, a situation that would not occur in actual use. These tests pander to a certain audience, and tell us very little.
@pineapplex24 жыл бұрын
Tells us how to put it back together wrong so we can not do it ourselves
@disarm2k104 жыл бұрын
No hall effects sensors didn't help maybe? Only correcting the current from feedback doesn't seem reliable when this kind of "out of intended usage" occurs
@sabertoothduck4 жыл бұрын
No AvE video is complete without a tear down with resulting electronic failures. The future of this instrument will be making easter sounds for the Chaplin
@dusinnhht3 жыл бұрын
I use mine since this vidjeo. I love it, it helped with many rusted bolts, and I also did built a house with it. It's still going strong. The only downside is, that it ate 2 original Makita battieas. Don't let them go under 2 bars, and I think you're good to go!
@ThePostApocalypticInventor4 жыл бұрын
Geez, you're in overdrive at the moment. I have managed to upload two videos in seven days. That's the best it's ever going to get for me, you on the other hand churn out videos like the World is going to end. Maybe we should have a chat some time. I sure could learn from your way of doing things. ALSO: Fun fact: This cordless impact exists in a few other colors (orange, white). The white one is available for 10€ on Ebay!
@miniwarrior74 жыл бұрын
Yes!!! We need more videos from you also
@serdiefgotreb4 жыл бұрын
We need another collab video!!!!
@txm1004 жыл бұрын
$10?! I need that link! :)
@sneugler4 жыл бұрын
Nice to see you here, love your videos. I’m going to need that link for the driver ;)
@johnpossum5564 жыл бұрын
He's probably trying to make Xmas money to buy his family all kinds of good things. Not at all unusual for this time of year.
@kking56524 жыл бұрын
You convinced me to get online and buy this knockoff, your a good salesman.
@spencerkast10424 жыл бұрын
What website was that tool purchased from?
@kitecattestecke23034 жыл бұрын
@@spencerkast1042 aliexpress clearly by design, should be 18V impact wrench :-9 i said enough before smoogle smacks me
@Papa-eb1lt4 жыл бұрын
spencer kast I “WISH”I knew😉
@DragonBuilds4 жыл бұрын
I used to buy cheap tools, until I realized I would save money by buying quality and using it longer time. My industrial surplus workbench and vise are decades old and still work like new. My $50 Black and Crapper corded drill died after light use with steel and wood, so I bought a Dewalt and it should be better. My cheap $20 pipe wrench broke, hopefully my new $30 one will be much better.
@MrPatrik2464 жыл бұрын
When I saw those impact's online I instanly bought 2, and I can say they are the best purchase of 2019 for me
@xjr1300paul4 жыл бұрын
We're from ??? Please
@MrPatrik2464 жыл бұрын
@@xjr1300paul they are everywhere on banggood,aliexpress just type in impact wrench makita compatabile cost's around 30$
@Gabson93 жыл бұрын
@@MrPatrik246 They say you have to open them and grease the mechanism. Are they still working good? There is one for 65$ including shipping and 2 batteries at the moment,
@MrPatrik2463 жыл бұрын
@@Gabson9 i did grease them, they still work. I would not trust their batteries, I use original makita battery, still going strong
@Gabson93 жыл бұрын
@@MrPatrik246 Thanks mate.
@stevevox49154 жыл бұрын
Oh jeezluss, must have been something pretty rough after the 'shrimp packets' to warrant a jump cut for comedic effect.
@carlswenson54034 жыл бұрын
12:40 -- 100% jinyuan switch right there
@emypena4 жыл бұрын
I used fake Makita tools as a parts donor to my original Makita tools. Original Makita parts are so expensive; harvesting non-critical parts puts my original Makita back in shape.
@kulrevon14 жыл бұрын
AVE I Don't believe the pinion gear is hobbed. No hobbing runout marks.
@TheDezdan4 жыл бұрын
For a second I thought I just got Wrangler-douched...
@duku32154 жыл бұрын
Wangster that copycat PUKE,!!!!!!?!? NEVER MENTION that awful hack here
@scruffy61514 жыл бұрын
The healing bench is the real deal.
@talonbaldwin89314 жыл бұрын
Getting used to another man mowing you're lawn eh?
@WillClayYoung4 жыл бұрын
I'm disappointed the top comment isn't about the fashionable fingerless gloves. Somewhere out there is a set of gloveless fingers.
@satchmodog24 жыл бұрын
I've always maintained that most knock off goods from mainland China are either seconds that didn't make QC, or they were made on the same assembly lines after hours or possibly diverted runs of product.
@jonathannagel74274 жыл бұрын
$30 is not insignificant; knowing someone stole a tool that was born on its deathbed: priceless.
@whatevernamegoeshere36444 жыл бұрын
You rotated the motor the other way when it was energized. Wanna bet that you sent a negative voltage back into the controller? Maybe you put something together for the first time correctly only to have it fuckered beforehand
@johnpossum5564 жыл бұрын
Is that how those microwave turntable motors do it?
@John-og7os4 жыл бұрын
What's green then red? A frog in a blender.
@ddt08894 жыл бұрын
Why did the frog cross the road? Because it was stapled to the chicken.
@talonbaldwin89314 жыл бұрын
Hey buddy, is everything ok at home?
@martinramirezjr78724 жыл бұрын
@@talonbaldwin8931 No, he's found out mum's been sleeping with the neighbor again...who did you say was your neighbor again?
@Derek-tk4wf4 жыл бұрын
And the followup, 'Whats brown and sits on a piano? Beethovens last movement. (ode to Friday the 13th Part 2)
@micjubba7094 жыл бұрын
That fake 1 is really good made well with decent parts cheers for vid i wasnt expecting it to be that good
@dustinjackson86464 жыл бұрын
All Hell For A Basement. Not sure if you're quoting Big Sugar but that's the best song they've ever graced us with.
@JHamilton7914 жыл бұрын
I picked the Makita battery platform, partially because of the BOLTRs. I haven't regretted the purchase once and, even as a lowly home gamer, they have been a joy to use. I'm not one to tell anyone where to spend their money, but I don't want to encourage the race to the bottom. I'm going to continue to buy the real deal. The batteries are where the money is at anyway...
@thatsunpossible3124 жыл бұрын
I also stick to Makita batteries. I found an adapter which lets you run Makita batteries in Ryobi, which is great for stuff that Makita doesn't offer, like tire inflators.
@MattOGormanSmith4 жыл бұрын
how are your legs gonna look like cantaloupes if you use an electric tyre inflator?
@GerinoMorn4 жыл бұрын
I got a decent deal: charger, 3 batteries, impact wrench and cordless drill. My Wera screwdriver tips fit into the impact no issue. The drill is indeed NOT SDS, and the hammer action is well, probably useless, but I just use a wired heavy drill if I have to go against masonry anyway. The only issue with the impact, is that it will drive the screw into whatever material, and then keep going until you get to the other side, if you're not careful enough. Or it will try and rip your hand from your arm.
@JHamilton7914 жыл бұрын
@@thatsunpossible312 ya know Ray, I've been eyeballing that bendy double jointed Ryobi work light...
@sabastianlove12864 жыл бұрын
Super entertaining. If I knew this guy's name, I might give it to my kid.
@garryr4 жыл бұрын
6:00 "suitable for construction site shelves" so, good for taking up shelf space but not for actual use?
@bored92304 жыл бұрын
Garry R It did say the motor was not used.
@willgaydos53234 жыл бұрын
Dude I love your videos. I will literally sit down and watch your channel for hours straight. I’ve watched almost all of your BOLTR’s and love the detail you provide. Do you have any formal education with these small electronics/motors/plastics? Or is it just knowledge you’ve collected overtime? You seem to have an insane knowledge of the manufacturing processes for the tools you review. Did you go to school for this, or have your travels led you to pick up on a lot of it.
@rlew124 жыл бұрын
The motor is most likely running in closed loop. A lot of the brushless DC speed controllers look at the back EMF to determine position. I'm guessing it's by looking at the signal from whichever coil is inactive, but I haven't looked into how they set up the logic for those things. This is why hobby RC motors sometimes twitch when you first turn them on, it lets the brain box know the position of the motor
@aaronhammond72974 жыл бұрын
I think you'll find this is not a brushless DC motor.
@rlew124 жыл бұрын
@@aaronhammond7297 Do you care to elaborate? because i'm pretty certain it's a 3 phase inrunner bldc motor
@981porsche34 жыл бұрын
4:57 Yeah but that’s 16 cents US!
@disarm2k104 жыл бұрын
Yeah like 20 canadians pesos :p
@stanervin61084 жыл бұрын
Hundreds of Yen
@TheOzTube4 жыл бұрын
The fake one is an Impact Wrench, the Makita is an Impact Screwdriver, they have different hammering technologies inside
@ethanallenhawley10524 жыл бұрын
AvE, this was a great laugh! Quality entertainment during the off season. Thank you.
@serge33484 жыл бұрын
I left a 1-star review on an AliExpress product and the seller blocked my so I couldn't buy any more.
@timbro14 жыл бұрын
How many of you got the Friendly Giant reference?
@mikeallan95744 жыл бұрын
90% of Ave's audience won't have a clue.
@tacomas96024 жыл бұрын
Where's that at?
@kmor88294 жыл бұрын
Only a few of your older Canuckistan compatriots are even going to get the 'Look way up' and 'Let down the draw bridge' references! Good times! I'll call Rusty!
@kobinashi4 жыл бұрын
Enjoying these videos and have learned more from them than any formal education or job I have attended!
@bassiclymike4 жыл бұрын
19:20 sometimes ya gotta pull the shaft out and flip 'er over to get 'er goin
@robertb67004 жыл бұрын
3:35 loving the "Friendly Giant" reference!!
@weissallessagtnix4 жыл бұрын
Recently bought this device. One of the best tools i ever got. Really, i mean it.
@joefreer4 жыл бұрын
link for the lazy pls
@DragonBuilds4 жыл бұрын
I actually really enjoy these videos. When I did stick n poke tattoos I would watch your videos to give me something to do while I poke myself with a safety pin.