Nudura radiant heated addition.

[@jimanderson4495]

Wow....Jess got promoted to Puddler.... hope she gets a raise. If you need help making those rebar protectors, I’ll travel up from PA. HELL ...I’ll even bring some! Thanks Ron for the show & humor.

[@bondobuilt386]

Uncle Jim we make those caps a lot. LOL Yup Jess is doing real good. 👍Glad you liked the video buddy. 👍😊👊

[@Yak52able]

This is the best video.

[@bondobuilt386]

Thanks I'm glad you like it. 👍😊

[@BillB23]

Hearing you talk about snow makes me glad I'm where I am. I spent my first 15 years east of Cleveland, Ohio and shoveled more lake effect snow than I care to remember. More than 50 yrs. below the Mason-Dixon line has spoiled me, lol. Grats on 10K subs. I'm sure the lack of stable gravy has something to do with it. If you've ever mucked out a stall you know what stable gravy is. It's so much more than mere manure. :D

[@SinnisjInsulator]

Great work Bondo. Didn't know your son's nickname was big biscuit, that's funny. He was a pro at hammering those vertical rebars last video. Good to know some accelerators are not good for wire mesh.

[@bondobuilt386]

Yup bud he is a big boy. LOL I didn't know that either about there accelerator.

[@squeekhobby4571]

Congratulations on 10K! Well done

[@bondobuilt386]

Thank you buddy. 👍😊👊

[@jessicabellomo6070]

I think I helped make a few safety caps too

[@RJM1011]

Using them cans is a good idea and cheap so thumbs UP.

[@Woodman_Custom_Sawing]

Were they Keystone? 🤣

[@arciliteguckinfenius1968]

Thank you for doing these videos Bondo! This really helps alot of us that are considering using ICF block. Keep up the good work!

[@shanefonville8241]

I really like how you take the time to explain to everyone the process, job well done guys

[@bondobuilt386]

Thanks Shane I appreciate the feedback bud.

[@carmelohank6086]

i realize I am kinda randomly asking but does anybody know a good place to watch new tv shows online ?

[@jaxonjerry8581]

@Carmelo Hank I would suggest FlixZone. Just google for it =)

[@scottbehr5690]

ICF is an awesome product...I've done quite a few ICF projects...We did the home for the owner of Zales jewlers, Did a Happy Feet plus and a hurricane shelter for guys 19 antique cars just to name a few...When I build my place, its going to be ICF..

[@bondobuilt386]

Awesome I agree its a great product. I like working with them. fast and real strong and energy efficient. LOL

[@mikesib3482]

Congrats on 10k 🎉👍👍

[@bondobuilt386]

Thanks Mike. 👍😊

[@jamesmucci9344]

Nicely done buddy

[@bondobuilt386]

Thanks James

[@daviddesilva4971]

Congratz on the 10K subs! Great crew you have there. Thxs for the vids!

[@bondobuilt386]

Thanks David I'm glad you liked it. 👍😊

[@chipmiller9074]

Nice small job Dune we'll

[@JayKast]

Congratulations on the 10k subs. I'm one of them! I always appreciate your content, and with each one I watch I gain a bit more confidence on hopefully pouring a fairly small slab (10x10) to get my feet wet. Thanks for everything, Bondo Built!

[@bondobuilt386]

Your welcome thanks for the support. 😊👍

[@briankemp2362]

I like your sense of humor. People see the beer cans not the orange caps hahaha. The Governor

[@bondobuilt386]

Ya thanks. LOL

[@shannonbeyers9765]

Good time to use a funny trowel on extention pole if you didn't have the power trowel. Nice clean job. Easy reach over to clean up against foam wall base after last pass with the power trowel. Sweet!

[@michiganengineer8621]

Congrats on the 10k!

[@bondobuilt386]

Thank you 👍😊

[@RJM1011]

Looking very nice. :)

[@bondobuilt386]

Thanks Richard 👍😊

[@mwrcrft]

Good job ,it makes a big difference with a power trowel and extra help if just to be a gofer and clean up.

[@bondobuilt386]

Thanks Matt it does 👍😊

[@tomscott4723]

I like the rod caps, it adds a little class to the job site!

[@bondobuilt386]

Tom I totally agree. I'm gonna make some more. Lol

[@tomscott4723]

@@bondobuilt386 I have a few if you run low haha

[@edstevens9357]

Great job 10k just a short stop on your way to 100k

[@bondobuilt386]

Thanks Ed I hope so buddy. 👍😊👊

[@AndyFromm]

Looking good👍

[@tommckinney3947]

Congrats on 10K! I give you 6 months till 20K. Those clips look interesting but not if they come off the wire when you step on them. Keep those vids coming!

[@bondobuilt386]

Thanks Tom I hope so buddy. 👍

[@SinnisjInsulator]

Oh also congrats on the 10k again, lol love how you called it on this video.

[@bondobuilt386]

Thanks buddy. it's pretty exciting. 👍😊

[@SinnisjInsulator]

@@bondobuilt386 it's a really awesome milestone. I'll get there one day =)

[@25vrd48]

Safety caps are acceptable and inexpensive plus it's fun making them useable . Great video .

[@larryhayman1096]

Love the safety caps

[@bondobuilt386]

Thanks Larry. 👍😊

[@cryptykilla8712]

near beer thirty ron lol. doing all these videos you need to grab some sponsorship considering the amount of different products you use. just a thought

[@JosephStDenis-dz9hq]

Congratulation. Great job and thanks for helping us to learn. Just found your videos recently and wondering if you measure the distance between the vertical rebars in the footing so they don’t interfere with the cross bracing in the blocks. Tks Joe

[@bondobuilt386]

Thank you. 😊 We just pop them in every 2 feet on most jobs. No you can just bend bar a little on way or another. and get the first course on there. Just make sure you are in the middle ob block so they fit in there.

[@biggeemac]

Love your videos. I am building a massive 3 level 6200sq ft ICF house and already poured the slab.....minus the pex. Missed opportunity. What would be the best way to heat the basement with radiant since the slab is already down?

[@bondobuilt386]

You could do insulation over the concrete with 2x4 nailers run the pex and 3/4" subfloor over it all 👍 Expensive I'm sure though.

[@ripperwrestling6587]

I like the caps and used beer cans many a time! I seem to have extra beer caps than the plastic mushrooms too... Go figure. LOL

[@bondobuilt386]

Yup they worked great. 👍😊👊

[@RDJim]

You didn't get to 10K subs by cowtowing to a few complainers. Your safety caps were just fine. Never apologize! Never surrender!

[@bondobuilt386]

Thanks Jim good advise I muted a couple of these trolls. LOL Just nothing better to do then complain.

[@billstobie4872]

Did he "shave" the foam flat after applying? I like that idea of spray foam vs sheet foam

[@davebeck3135]

Another great video Bondo. I have a question, how well does the concrete bond with the foam? Thanks

[@bondobuilt386]

Dave I don't think it needs to bond to the foam. I don't think it bonds to it much at all. The concrete is strong on own its own just as if we poured it on plastic vapor barrier.

[@WoodNMetalWorkshop]

Ron, what concrete mix would you suggest for a future shop addition. Wanting to use it as a apron 20x20 for a few years before doing the wall and roof. 6 inch's thick, thickened edge with pex for heat like the rest of the shop. Any advice would be greatly appreciated.

[@bondobuilt386]

I would do 4000 lbs concrete with wire mesh and fibers. you will want light air in it if it will be outside for a couple years.

[@WoodNMetalWorkshop]

@@bondobuilt386 thanks, I just didn't know if I should have the air or not. Now I just need to get the time to form it up and gets my boys all free at the same time.

[@wagnerj01]

Hahaha, "I think I'm going to go home and make some more of these safety caps".

[@bondobuilt386]

Ya just trying to be safe buddy. LMAO.

[@seeleykellogg133]

I need to get you down to Connecticut to do my garage addition, I'm looking at about 70 to 75 cubic yards of Concrete ( 120 x 10 foundation wall, 100 x 10 square ft of wall and 1200 square ft of garage floor)

[@bondobuilt386]

I can't keep up with the work 1/2 hour from my house bud. 😊

[@Tito1984]

I was wondering about running the supply and return pipes into the same hole and insulation sleeve. Seems you will cool the supply side considerably as it is entering. I would think two holes would have been a better idea, no?

[@bondobuilt386]

Matt It will not make a difference in the heat output of this system.

[@mikeaustin9810]

Now I see about spray foaming the Crawl space

[@bantambryce4858]

A couple months ago I reached out to you on one of your videos hoping you could teach me how to do ICF. Wondering if the offer still stands? Will work for free since I know what the knowledge is worth

[@bondobuilt386]

We have a frost protected one coming up in a few weeks. Maybe you could help on that one.

[@bantambryce4858]

@@bondobuilt386 how do I contact you

[@bondobuilt386]

@@bantambryce4858 Look me up on Facebook

[@gregpaterson330]

I don’t have any problem with the beer cans just the brand of beer. I prefer the gold cans. Ha ha

[@thomasduin2746]

You had to work partial days so you had time to drain your safety caps. Always thinking ahead.

[@bondobuilt386]

Yup that's what I'm saying. LOL

[@williamfleenor7687]

I thought the beer can caps were funny There's always some winers in the comments complaining about something 🤔

[@bondobuilt386]

Its always someone bitching about the wire mesh. LOL

[@raydrapela634]

So you are showing that the wire is only for tying the hose. lying on bottom doesn't add tension strength. so when it cracks years later?

[@bondobuilt386]

Ray we used fibers for reinforcement.

[@kevinkevin9448]

So u pour the concrete next to empty blocks ????

[@bondobuilt386]

Yes they are just spray foamed to the footer. They never move.

[@zacharywood4399]

Bondo, when you do foam sheets, for radiant floor under concrete, do you put the vapor barrier on top of the foam or under it on the stone? I’m building a house for our family and I see conflicting information on the internet (surprise).

[@bondobuilt386]

Awesome 👍We put the polly down first under the foam Zachary.

[@josephsmith7849]

🤙🔥🇺🇸

[@craigslist04]

I like those PEX clips, they look like SharkBite PEX Wire Mesh Clips.

[@bondobuilt386]

The worked pretty good. The homeowner had them so we used them. Backed them up with some zip ties. 👍😊

[@italRotty]

make some more bud-lite caps ! screw the keyboard diddlers !! hHAHAHA

[@curtisharlan9230]

Mine was 63 ford Econoile

[@oldtimefarmboy617]

If she cuts the legs off Big Biscuit you can start calling him Short Stack.

[@mariowickel456]

Lol make more safety caps roflmao

[@craigclemson9642]

You still think the rebar are a joke safety of your people does not matter just big joke

[@bondobuilt386]

your muted stupid. sick of listening to your negativity bud.

[@thefrasers2073]

You seem to be missing the 6th sense, sense of humor.

[@thomasduin2746]

Always a few individuals that don't realize that their local doctor can remove that big stick from up their @$$.

[@bondobuilt386]

@@thefrasers2073 Ya I muted him got sick of this guy. LOL

[@bondobuilt386]

@@thomasduin2746 Yup I agree buddy. LOL

[@CybekCusal]

This series was painful to watch. Too many big mistakes. Good luck with your channel but I'm out.

[@JayKast]

Can you provide constructive criticism? What were the big mistakes? Maybe Bondo Built can explain why he did what he did. Maybe we can all learn from what you saw. Be constructive, at least.

[@CybekCusal]

@@JayKast it's not my job to teach "professionals" and no I don't owe anyone advice. I have a life.

[@bondobuilt386]

Thanks and good bye.

[@bondobuilt386]

@@JayKast Thanks

[@narcisoramos5949]

Let 's get some barbeque there,boozes up li'l bit.bonus!