Dodge Ram Park Assist System Failure - Sensor Replacement

[@andrewvaldez8106]

I have the same Problem on my Dodge Ram 1500 2014 …. Thank you!!!!!! Now I can get mine fixed as soon as I get my sensors from Amazon!!!! You are a Big Help Merry Christmas 🎄🎁 and Happy New Year!!!!!

[@paomeche]

Thanks for the video and for let us know where to buy them. I asked them at the dealership ~250 Cad each sensor!

[@jenniferdoan-scott2558]

Thanks for the excellent video and instruction, The operation was a success!

[@colinmcfadyen2230]

Got a set of 4 replacement sensors on Amazon for $35, swapped them out and they work. I did find it a little difficult to fully attach the wiring harness, so if the replacement does not work, be sure everything is firmly attached.

[@PattyHunter-q8h]

Replaced my truck sensor. Now when I start sensors working drive a little ways and they go off

[@philipmcdonough7683]

Excellent video so helpful,Thank you.

[@Snub5741]

nice vid!

[@chrisrebeyka5283]

Great video, thank you! Which sensors did you buy on Amazon? Lots on there are 1 star due to crap quality...

[@KendorFarms]

Umm I can't remember the exact ones... but They were about 40 bucks here in Canada. Have been working great!

[@sadsciuidae3425]

bought banged truck ... how many wires are to each sensor ... so Im guessing each must have a wire to report separate obstruction position

[@KendorFarms]

I cab get a wiring diagram but yes I believe two wires to each connector

[@sadsciuidae3425]

@@KendorFarms Thanks for reply ... this AM I think I found the Sensor wire loom for the sensor lights ... looks like each is three wires. I replaced the bed with a flatbed and loose the stock bumper for a welded hitch and will re-install the sensors in the body boxes ... maybe, if I cant figure out the back-up camera ... thank for your reply

[@avahartage6089]

i haver a 2011 ram 1500 Laramie & mine goes off & on even while i am in drive & when that comes on its makes the 4x4 comes on as well. i have gotten all kinds of diagnostics & repairs & no luck. i seen your video & ordered the sensors from amazon. I am waiting for them to come. i have gotten everything checked with dealer 4x4, ABS, Wheel speed sensor, , fuses, Do you have any suggestions

[@KendorFarms]

The Service 4x4 and abs light can be the result of a bad brake switch

[@keithdavison7357]

I have a different error. Clean sensors..... I've replaced them and still doesn't work. 😢

[@patrykbieniek3358]

Are the park assist sensors connected to back camera? Mine broke and the park assist doesn't work. I already changed all 4 sensors

[@KendorFarms]

I don't believe so...

[@TheCD2009]

I have a 2017 1500 big horn edition and I keep getting the parksense sensor error. I changed all the sensors and changed the wiring harness and it still shows the error. I'm putting this out to the world to see if anyone has any suggestions? Rear sensors

[@jakerice594]

Ive been told if the angle is off by 5 degrees that it will make it alarm. so maybe the angle of the sensors is just off? I have no idea what the “neutral” spot is or if there is validity to the statement. Just what I’ve been told at the dealership.

[@KendorFarms]

Could be! Luckily new sensors fixed the issue

[@stetsonsmith2810]

Do you have the link for those amazon sensors?

[@KendorFarms]

They probably don't have the same sensors anymore, but I just searched my vehicle and found them

[@KendorFarms]

A-Premium 4-PC Reverse Backup Parking Aid Assist Sensor Compatible with Select Jeep, Dodge, Chrysler & Ram Models - Grand Cherokee, Liberty, Ram 1500 2500 3500, Grand Caravan, Charger, Journey, 300 a.co/d/4YSyIoO

[@MrPropboy]

had a gummy one also mine was to close to exhaust right inline with pipe soft as its been melted

[@KendorFarms]

Yea who knows... that may have done it too...

[@dirtcheapexcavating]

Do you know where the parking module is located?

[@KendorFarms]

No actually I have no idea, never had to deal with one yet

[@adp33]

Located behind driver kick panel next to the parking brake foot lever. Have to remove the kick panel trim/ door sill to see it.

[@jonwurster1275]

What does it look like? I have carpet and wires behind my kick panel 2010 ram with backup sensors

[@COOful3]

Not for me. Changed all 4 and still no luck and my rear led went out.

[@danastario]

same here

[@dudleydorite7678]

I'm getting the same message on the dash. But the button on the dash doesn't light up at all

[@KendorFarms]

Hmmm it may even be a related fuse if the light doesn't work... or the switch itself

[@jonwurster1275]

What fuse and where is fuse for park assist

[@pedrochavez2372]

Did you have to follow any sequence? Like driver side or passenger side or anything like that? Cuz I order mine off of amazon, but I was out of luck. 😞

[@COOful3]

Same here

[@doubletopsecret1]

Mine still says clean backup sensor. Until I back up

[@PuR3MaGzz]

Did you ever find out what thats means cause mines say that too but idk what it means and on my camera it doesnt have the guide lines and idk if that has anything to do with that either

[@doubletopsecret1]

Exactly what you said. Yep. Same. No. I’ve changed all the sensors. No change. I’ve thought about doing the hardest job first. Vice grip your cables together and carefully remove the fuse box assembly. Clean each plug in device with a nylon brush and contact cleaner. Then a “film” of No-Ox electrical grease on each m/f area. Clean the fuse plugs. This will reset everything and at least give a good starting point on my electrical issue. It’s a needle in a haystack I’m guessing. There’s a you tube video to explain this. Just takes a good day to do it.

[@PuR3MaGzz]

Yeah i figured nobody has but it sucks but i decided to just leave it like that i just figure since it came with it i would try to fix it but then i was like i dont really need it since the camera still shows what im backing up too anyways

[@PuR3MaGzz]

But thanks for replying brother and hope you get it figured out

[@jorge5724]

Why dont they work