[Boomba FAQ] BOV vs BOV Adapter / Full Vent & Full Recirculation

[@zephaniahdehaven]

I just installed the blow off valve adapter in my ford escape. Sounds amazing with my custom intake and exhaust!! Very impressed!

[@matthewdaniels7462]

Thank you. Great to hear from a company who wants interaction and transparency.

[@fr0zen5929]

Just put a bov adapter on my USDM 2016 Fiesta ST last week love it!

[@BoombaRacing]

Thanks for the follow up! Glad to hear you're loving the product!

[@DudeMungus]

Which one is louder 50/50 or full Atmosphere

[@BoombaRacing]

The full atmosphere is the loudest piece we sell.

[@nkchit08]

Have you ever had anyone void an extended manufacturers warranty after installing your BOV full atmo adapter for a 2.0L fusion?

[@davidaguilar5070]

Will it cause a check engine light on a 2014 Ford Focus st I just bought one and I haven’t installed it because I want to avoid the check engine light

[@Nikdik]

2017 ford explorer sport. Which adaptor would work best, the full VTA or partial with the screws? Without running rich or engine light.

[@stevesas632]

Hi, I have a 2011 BMW 1M coupe which uses the N54 Twin Turbo 3.0L engine. I want to upgrade my charge pipe & also the OEM DV. The car is just stock power, which one of these do I need?

[@danielthethird0949]

I have a 2021 Silverado 2.7 turbo there not to many options out yet and the ones that are available are almost two hundred dollars can I use one from a different marked ?

[@Tpeters819]

So if I would need to buy your 50/50 adapter and your recirculating bypass valve to get some sound on a ecoboost mustang if I want it correct?

[@BoombaRacing]

You could just buy the 50/50 adapter! It turns the stock BPV into a BOV!

[@beko23]

I'm sure this is a dumb question.. but you said that the fully adjustable BPV has all the added benefits as a BOV... what are the added benefits. Thanks !

[@BoombaRacing]

The stock BPV features very poor construction and is made from cheap plastic and rubber and features a very flimsy spring. Our valves are made from aircraft grade billet aluminum, a brass piston, and Viton O-rings and that are tested to 100 PSI to ensure leak free operation.

[@shythawks9549]

BoombaRacingInc I have heard these make your engine run lean. Is this true? I’m looking into the adapter

[@bananameowmeow9260]

hello there I'm from Malaysia and I accidentally ordered a fully vented bov adaptor for my non-USDM Malaysia's 2014 Ford Kuga/Escape 1.6L turbo let's say I install it and the engine check light pops on, what harm will it do to my car ? Is there any solutions?

[@daveorton3830]

Are there any benefits / drawbacks to how many screws you remove on the blow off valve adapter? Performance / engine efficiency etc

[@BoombaRacing]

Hi! The number of screws does not affect the performance or efficiency, only the amount of noise and air vented. With the design, a majority of the charged air is recirculated even with all holes opened. Hope this helps!

[@beko23]

I really don't want a BOV due to the sound. It wouldn't work with my housing and work situation. But I want the performance increase. Really wish you had a sound clip of the BPV demonstrating the sound with all screws... and then with out them. Maybe even a sound clip with just 1 screw removed. I am reluctant to buy the BPV because I don't know what it will sound like.

[@BoombaRacing]

Our BPV and BOV both contain a premium design that is much higher quality than the factory piece. It features billet aluminum with a brass piston, and Viton O-rings that will withstand over 75 psi. We are actually in the works of publishing a video of our fully adjustable BPV which will demonstrate the sound!

[@BoombaRacing]

We made a video like that, just for you! Check it out on our channel!

[@jonahkaiguam]

I have a hyundai with the 1.6L turbo engine and was wondering if I install the full vent to atmosphere bpv adapter, will I have any noticeable lag from the turbo? Check engine light possible?

[@finnlorien]

Hey guys, I’m in the UK and I’m wondering if I can fit these on my 2015 1.0l EcoBoost Fiesta?

[@flowdc4402]

can i use it on my 2018 camaro 2.0 turbocharged?

[@BoombaRacing]

We dont have confirmed fitmet on that car.

[@gcw89]

Do you guys have a walk-in store? you guys are like 10 minutes from me. I'm at Rosemont x) Looking for a BOV for a 2023 Acura TLX Type S

[@BoombaRacing]

Hi, we do offer walk-ins but only take card payment for products. If you'd like to purchase online we can be sure to have it ready for you when you stop by (leave a note at checkout).

[@wyodboys3921]

Can I use the blow off adapter on a Chevy Cruze 1.4 turbo that has a vacuum activated bypass valve without throwing a check engine light?

[@BoombaRacing]

This will not work on a Chevy Cruze

[@denyden1]

does your adjustable bypass valve have a way to adjust spring tension or is the adjustment only achieved through venting via the screws? asking for possible shenanigans on a 15g turbo with the same mount pattern on a non ford focus

[@BoombaRacing]

Our adjustable BPV has venting adjustments. The spring rate is set, with no need for adjustment.

[@MrCRios]

i have a 2014 jetta se 1.8l turbo and i want to know that if i will get a check engine light with the top blue bov adapter

[@BoombaRacing]

It will not throw a check engine light. This piece works error-free.

[@stanceera5484]

Do I need to tune after installment or can I run it like that on my st focus?

[@BoombaRacing]

No tune is required!

[@colejanne6487]

How much air is vta with the adjustable bpv with all the screws out? Also i had one of your full recirc valves on my 2017 wrx and it made a beautiful flutter noise. Can i expect the same sound with the adjustable bpv on my 2014 focus st?

[@BoombaRacing]

Due to the way the Ford units operate, it won't make quite the same amount of "fluttering" that is commonly heard with our WRX units.

[@啸小]

I have the ecoboost mustang and I want to know will the adapter throw check engine light? Which one adapter should I choose?

[@BoombaRacing]

What country is your vehicle in?

[@啸小]

BoombaRacingInc US

[@啸小]

BoombaRacingInc USA

[@BoombaRacing]

Running our BOV adapter will not effect the fuel trim or throw a code for a couple of different reasons. The biggest reason is due to the way Ford tunes their USDM turbocharged cars. The USDM Ecoboost engines are MAP tuned, whereas in the rest of the world they use MAF tuning. This changes the way the ECU meters air going into the motor. In a MAF tuned car, the fuel trims would be affected by venting to atmosphere, however on a MAP tuned car like yours, the ECU is not affected by venting to atmosphere. In short, you've got nothing to worry about!

[@啸小]

BoombaRacingInc That's perfect. Which kind of adapter should I choose

[@alexthibault1]

I have a 2015 VW Jetta GLI 2.0T, what is the part number that I need? thanks

[@BoombaRacing]

We do not have confirmed fitment of any of our BOV's on a Jetta at this time

[@WeDepict]

I have a 2015 Eco boost Mustang will the 5050 adapter work for it?

[@BoombaRacing]

Yes, the Mustang Ecoboost uses the same bolt pattern and adapter as the 1.5/ 1.6 Ecoboost.

[@miguelquidouce]

Would this fit on a hyundai tucson 1. 6 turbo from 2015/2016?

[@BoombaRacing]

This one will! www.boombaracing.com/hyundai-veloster-turbo-blow-off-valve/

[@GregMartinezPT]

How does the boomba bpv on a wrx make noises if it's fully recirculating?

[@BoombaRacing]

You can still hear the unit opening and closing through the intake resonance.

[@TheChicowoodson2005]

1996 eclipse gst with bpv. What should I get? HELP PLEASE

[@BoombaRacing]

Forums and Facebook groups will have the best answers for this model for you!

[@me-kd6me]

Does it work in chevy Malibu 2020 1.5l ?

[@BoombaRacing]

No, unfortunately we dont have any products for that platform

[@KeysmashGirl]

Do you make 50/50 valve adapters for 2016+ civic?

[@BoombaRacing]

Hello! No, not at this point. We offer a full vent-to-atmosphere BOV and a full recirculation bypass valve for the 10th gen Civics

[@sergetype]

Hi, I have a USDM 2017 2.0 Ford Escape Ecoboost, what is the part number that I need? thanks

[@BoombaRacing]

We don't offer a direct replacement for the 2017 2.0 escape at this time. The clearance between the oil pan and the stock BPV is just too close for comfort. With the way the motor rocks back and forth, the oil pan is very likely to hit the BPV.

[@sergetype]

BoombaRacingInc I have read that many people are using the 1.5/1.6 ecoboost adaptor without any issues. Is it the same bolt pattern? Will this give me an issue as well? Thanks

[@BoombaRacing]

The bolt patterns are the same, yes. However the clearance between the BPV and oil pan are extremely close.

[@Waka439]

Which do you recommend for a 2018 civic si?

[@BoombaRacing]

Check out this link! www.boombaracing.com/2016-civic-1-5t-BPV/

[@christianjoel96]

Work with the Mini Cooper S 2008 and 2009 ?

[@BoombaRacing]

We haven't tested this piece on that vehicle, so we can't confirm fitment or if the product will work for this vehicle.

[@davidpalacios362]

Will this work on my 2017 vw golf tsi s 1.8t

[@BoombaRacing]

www.boombaracing.com/2015-volkswagen-gti-blow-off-valve-adapter-bov/ This will work with your MK7 Golf!

[@bocho13mm]

I have a 2018 honda si coupe will the full bov cause any turbo lag or loss in performance?

[@BoombaRacing]

The vehicle uses a complex method of MAP and MAF sensors to monitor what the vehicle is doing with incoming and outgoing air. The spring pressure we use in our BOV was carefully chosen so that the vehicle's operation is not negatively impacted from running this BOV. There is no stuttering, no increased turbo lag, and no check engine lights from running our BOV. The stock BPV features very poor construction and is made from cheap plastic and rubber and features a very flimsy spring. Our valve has aircraft grade billet aluminum, a brass piston, and Viton O-rings and is tested to 100 PSI to ensure leak free operation. All of our BOVs also carry a lifetime warranty to the original owner.

[@bocho13mm]

BoombaRacingInc Awesome thank you ill be purchasing one real soon! Wish you guys had one in green like the color of my si ☺

[@garyeplinglll]

I Was also wondering if the boomba bpv would be better to run on the 18 si instead of bov causing richness or whatnot. Or does it matter much?

[@joealfaro9862]

Can i use this bov on my 1990 crx that is boosted

[@BoombaRacing]

This universal BOV can be welded to your charge piping :) www.boombaracing.com/universal-blow-off-valve/

[@cade_44]

Would a bpv spacer work on my 2008 wrx?

[@BoombaRacing]

A spacer would not work for that car.

[@ricardobatista5130]

You have a adapter for europian Ford Fiesta ST line 1.0 140ps?

[@BoombaRacing]

At this time we do not offer a BOV adapter for the 3-Cylinder engine.

[@ricardobatista5130]

BoombaRacingInc ok tanks

[@timcrone9577]

I’d buy one for my Focus 1.0L EcoBoost if you did. What would it take to get this made?

[@BoombaRacing]

We'd need to see significant market demand before running a production batch for that engine.

[@ricardobatista5130]

If you build anything for my cat, please contact

[@yystyyst1567]

Great video

[@BoombaRacing]

We're happy you liked it! You should check out some of our other videos!

[@UnfocusedRacing]

Please get a pop filter for your mic.

[@BoombaRacing]

It'll have to go on the list of things to get for our media guy!

[@Lxmustang805]

So the 50/50 won’t cause a check engine light

[@BoombaRacing]

No, it will not.

[@ABXPONCE]

I just got a 17 Civic Si. I want to buy one of these.

[@BoombaRacing]

Right here: www.boombaracing.com/2017-honda-civic-si-blow-off-valve/

[@Neptune8]

Wish you guys had just a plain blue boomba sticker , no black box , just the logo with more colors

[@BoombaRacing]

We can look into offering more sticker options again.

[@Neptune8]

BoombaRacingInc just without the black border would be cleaner looking on my FiST

[@BoombaRacing]

We should be offering these again in the future!

[@brandoncox28]

They could only afford cardboard with stickers as a background LOL 😆

[@Cobaltrb19]

Can this fit the geely coolray/volvo xc40 1.5gas turbo engine?

[@Just_Joe71]

Will the adapter throw a check engine light on my 2.3 ecoboost Bronco?

[@BoombaRacing]

Hi, because the vehicle is MAP tuned, the adaptor will not cause any issues with codes or engine lights!

[@robertaddison7973]

Do you make a50/50 for a Ford Focus 1.5 uk spe