K-Swapped FRS Hits The Dyno! E85 and More Power!

[@Maroco918]

Never change man. Showing us the good the bad and the ugly. Much respect

[@plonkey1593]

@mikey bigballs it is fake yeah no checkmark and youtubers dont do things like telegram or stuff like that

[@XxChocoTacoxX]

This car would be sick to own. I've driven an FRS with some mods and a tune but even then it needed more power. Adding a little sprinkle of Honda reliability into the mix is just chef's kiss. Also, loving all the SRT-4s in the shop. I have one in Electric Blue and everyone says the same thing to me: "You don't see these around anymore." Good to see a shop taking care of the ones that are still driving.

[@Onewheelordeal]

You really don't see those around anymore, but the ones I do see are usually kept like a museum piece. I personally know of 4 ppl who blew one up in HS/College around 2010 so I knew even then the supply was dwindling fast

[@builtbybagsy]

Someone is going to be very, very happy to win that👌

[@mitchvankesteren6771]

Hopefully it lasts more than a week before it gets wrapped around a pole or barrier!

[@CrashRacknShoot]

I got my fingers crossed! That little thing is my "attainable dream" build, almost to the bolt. Man, it would be so cool to get that thing. My lease is up soon, too, so to be able to have that thing to zip around in to and from work for a bit would be the greatest ever. Best of luck if you entered!

[@dylanzrim3635]

Yeah, the police impound lot will love it

[@MotorSwapDan]

It'll be mine I got 12 chances in the hat

[@StanleyKubick1]

This thing's going to blow up before anyone claims it

[@larrysgarage1682]

Awesome! I have a similar setup in my colorado with a few more upgrades, but made 460rwhp on 60% E 17psi. K24 motor with k20 oil pump. Limiter at 7500rpm.

[@Onewheelordeal]

Bet that's a cool truck

[@mikestrabley6500]

I've been watching you guys for a long time, since you only had the hatch. I'm disabled but when I was able I loved working on my multiple Honda's. I now have a mazda and a old pick up. I absolutely love all your videos keep it up and cant wait for the race truck.

[@aaronwest906]

Seems weird you didn't utilise the internal map sensor on the haltech 1500. There 3 bar stock and will read up to 26 or so psi. Also they have an input for a flex sensor so it could run on both fuels and adjust the tune to suit the ethanol content. Why not use the features the haltech has?

[@rsharney1111]

Good observation

[@kxlucifer]

I mean they only use aem and fuel tech hal tech is new to them

[@Underpantsniper]

3 bar would be around 45 psi

[@NorwayVFX]

@@Underpantsniper Yeah but MAP sensors tend to read absolute pressure, so they read around 14.7 psi at atmospheric pressure and will read up to around 30 psi of boost.

[@Underpantsniper]

@@NorwayVFX that makes sense I forgot about the atmospheric pressure being 1000 millibar at sea level.

[@neong]

This car looks slick. The power might not be what Kyle hoped but it far more than a stock FRS.

[@umakemerandy3669]

Yea, stock frs is fun. Got to take my boss's for a weekend and put it through the paces. I wished it had another hundred or 2 horses though so this would be great.

[@nathanshort7402]

@@umakemerandy3669 exactly what everyone I’ve met says. It’s super fun but another 100hp would be a perfect fun car

[@Justinhomii]

Not slick in person

[@justinbatchelor2418]

There a slow car thats fun to drive fast.

[@GoodlookinMug]

That ghetto log manifold is killing it..

[@kerryjacobs4150]

Just copped myself a T-shirt and a sticker from you guys, been following the channel since the hatch was unreliable and was just being wrenched on all the time so proud of you guys and how far you’ve come and would love to come and work with or for you guys one day but for now I’m stuck over in shoddy old England!!

[@DjSubstain]

The land of the EP3 Civic Type R.

[@la_plata3588]

Bro honestly non of the cars besides the diesel truck and MR2 will be reliable

[@Jsmith9619]

Copped. Must be a cool guy.

[@froggersgarage5127]

@@la_plata3588 the NSX

[@pinecone1811]

THANKYOU!!!!! For smashing a few gears and not letting off early!!!❤ The FRS is looking, sounding and going sweet 🤙

[@RadDadisRad]

I figured wastgate would make 240ish. I’m glad it did. That’s a perfect daily driver pump gas tune.

[@acidity7663]

Best FRS I’ve seen honestly very unique and extremely clean 10/10

[@Lucidbkeo]

I wouldn't say it's unique as these wide body frs's are everywhere, same with K swapped frs's but it's definitely clean

[@zachkobilus3556]

The wrap looks like shit in person

[@ThatHoodlum19]

lmao the K is the only thing that is unique and even then, that's a stretch these days.

[@Justinhomii]

🧢

[@obejopr]

Car has a haltech with a built in map sensor , just use that one and have brent tune it

[@Jake_Hamlin]

Hey Kyle, look at the Haltech 1500 ECU. There is a connector for vacuum line beside the wiring harness plugs. The ECU actually has a Map sensor (3 Bar) built into the ecu itself. Your Tuner definitely should’ve known that and whoever installed the ecu probably noticed it too

[@-mcfmedia]

👆👆👆👆👆 Thanks for watching and leaving a comment. Send a Dm to claim your reward📥

[@Onewheelordeal]

I was wondering if whatever ECU they were using had one built in

[@bgd5339]

If you don't quit while you're ahead, someone's going to win a blown FRS! 😀

[@pashahillyard8763]

Ngl I wouldn't hate that

[@jackweta]

Awesome effort putting out so many videos, very entertaining

[@travisschulz6342]

That log manifold is holding it back on the power but 300whp is still fun

[@Out-In-The-Woods]

I think its awesome that your learning the tune world kyle!! Brent would be so proud!! Gonna order a shirt after the video for my chance at that bad boy and if I don't win at least I have a badass tshirt!!!

[@maxpower700]

Kyle: "Ive done 3 trips with this! Its super reliable" I would laugh, except i feel the same for my car, and its not even that modified 😂

[@BigTdfw]

Guy drives a 7 sec car and stays cool as a cucumber, but a 320 HP FRS makes you yell through the gears?? C'mon kyle, no need to sell it. We all know its a nice ride!

[@chrisrobles2012]

I thought the same but it probably feels more unsafe due to wheel spin, than a track car dialed in , only going straight down a track.

[@kyleneedham6106]

Should always dyno in the gear that is closest to 1:1.

[@ScottCouch83]

Everything you put out is amazing!!!!!!!! Love watching!!!!!!!

[@hoost3056]

You should put a flex sensor in that thing so that the winner won't have to tune it. Save a lot of time.

[@naughtmeenaym869]

No E85 in many areas. Glad you're doing it both ways.

[@richardlapoint1845]

I'm gonna lay low, cops already know me on my favorite road to work 🤣🤣

[@Adam-nv9zo]

That's gonna be a ton of fun for whoever wins it.

[@digital0785]

Always weird to me from watching you guys for so long and seeing stuff that's literally 10 mins from me in your vids lol

[@DevilishEdits1]

log manifold is why its only making 320HP

[@d_tuned_media]

should find one shirt of every shirt youve ever made for the channel and frame them and hang them in the shop some may need 2 for backside of the shirt but it would be soooooo cool to walk into the shop an see all the memories you made just in shirts the history made

[@shyguy8426]

I'm so inspired by you guys at boostedboiz. Currently building my own hatch(Starlet) and swapping I a 1.8 2zz with boost in mind. hopefully one day il catch you when I start touring the world with my future project cars. Thanks for everything lads and keep up your awesome content. your friend from the UK

[@zask0]

He hit 3rd gear on first try, can't believe! :D

[@Kuldeep_Giri]

I would suggest flex fuel sensor and a map for it and ecu can be locked if you want 🤭

[@nicholaspayne349]

Kyle is always like “there’s this one small part that will allow us to make WAY MORE POWER but we ain’t gonna put it on”…. Then when it doesn’t make as much power he says well darn, slaps knee.

[@ricardoaguilera3264]

Hey Kyle U don't need a next map senor the haltech have a on board map senor which goes up to 2.5 Bars

[@CoffeyBuilt]

Just watching this made me go make a couple more purchases to the boostedboiz wedsite!! 🙏🏽💯

[@jamesmcivor340]

🙏

[@benjamindonald87]

It's the log style manifold that's restricting it bro.

[@idontwanttopedal]

I say it could be the exhaust manifold holding it back

[@garyhowe88]

Doubt it, people running over 600hp+ on log manifolds

[@newtonfirefly3584]

@@garyhowe88 You are correct @idontwantopedal; BoostedBoiz; also the issue is the lack of increased power difference between normal unleaded fuel which contains ~15% ethanol and normal "E-85" from the local fuel station, which contains commonly 40% ethanol, sometimes up to 55%, and in summer, warm temperature months, some have 50-65% ethanol. The issue seems to be more with ignition timing, perhaps the fuel injector timing, duration, amount. Sincerely

[@jesseclark1844]

Love the FRS, if I had the money would like to have y’all to build me one just like it.

[@adamalaniz]

I loved seeing all of those Srt-4’s in the background.

[@-mcfmedia]

👆👆👆👆👆 Thanks for watching and leaving a comment. Send a Dm to claim your reward📥

[@nathanielbarbeau4821]

The SR20 fanboy needs to chill.

[@tablesoup]

Goes from 300.10 to 304.08 - 'only made 3 more horsepower'.. Now the third shift miss makes a lot more sense :D

[@wq.sap_44749]

Thanks for watching ❤️❗️ 👆☝️Stand a chance to get win big by getting selected among my shortlisted winners. Telegram only to claim your prize🎁🥰🎁

[@K24_boosted_bunny]

You might need a fuel regulator, Evan’s tuning told me to put one on mine. Mine’s currently at Grannas Racing getting a t56 magnum

[@area50view]

Just watched 6 seconds..and the video is gonna be lit🔥

[@maxst2]

Sick of the cold... I could use a trip to Florida... still got passes into Universal to use

[@ashbazinga]

Can't you just run a vac line to the inbuilt map sensor on the haltech elite. From memory a 1500 has either a 2.5 or 3 bar inbuilt map sensor.

[@zackthompson7537]

Congrats on hitting 3rd gear 3 times in a row, that has to be a record for you

[@shiftlifegarage3284]

Kenny is so humble 😎👈

[@WiscoPrelude]

so happy the frs is moving along. just bought a shirt for my entrys stoked!! hope i win this frs the day after the give away ends is my birthday!

[@Danger-Dave]

Love the look of that "Stormtrooper" FRS! 300-350 Hp is perfect for a giveaway ride!

[@jonathan7744]

the brz transmission is a 5th gear 1:1, Dynoing 3rd makes it really difficult to properly compare to a FWD dynoing in 4th.

[@zerathian2291]

Nice, my WRX is 303 plenty of fun. Torque vector steering is rad.

[@ziggo0]

Seeing the srt4 on the lift makes me miss mine significantly

[@wq.sap_44749]

Thanks for watching ❤️❗️ 👆☝️Stand a chance to get win big by getting selected among my shortlisted winners. Telegram only to claim your prize🎁🥰🎁

[@ryaneyles4812]

Kyle, test your e85 fuel as a sample after is comes out of the fuel rails like you would have when draining the tank of pump gas... i think holley and some other brands do test tube kits etc etc.. i work on alot of toyota 86s as we turbo charge them and when we are doing a flex fuel on the car the pump gas doesnt always drain the first time you try and change it over.. fuel is left behind in the saddle type fuel tank.. so your e85 could have easily dropped down to e50 with just little bit of pump gas in tank... sometimes it takes like 2-3 flushes of e85 , 5-6 litres at a time to really keep it up at e85... could explain why your first few pulls weren't increasing in power .....🤔

[@Javii96]

This was my first thought too, but Wouldn't they have detected knock if that was the case? I know they're used to switching from pump to ethonol

[@Javii96]

I was wondering if exhaust or air filter is restrictive. They're used to hood exit exhausts. Idk tho I only have slow cars

[@laupy4104]

Also rwd and fwd cars are diffrent on the dyno

[@newtonfirefly3584]

@ryaneyles4812; ​@@Javii96 ​ @laupy4104 @BoostedBoiz; The issue clearly, obviously, certainly the difference, increase between normal unleaded fuel with ~ 15 ethanol and local "E--85" which commonly has 40% ethanol, sometimes up to 55%, had only increased by ~ 30 wHP It should certainly be greater and will also increase with higher ethanol content, especially proper E-85=C-85=85% ethanol. The issue is more to do with the ignition timing and perhaps the fuel injector timing, duration, fuel amount within the tables which need to be adjusted - 'tuning Sincerely

[@mrgmc6314]

I'm not big on wanting give away cars or non v8 cars , but I was just telling my wife I'd love this frs built by you and wyatt or the f150 garret got on his channel ,,, both super dope vehicles

[@Ada-zn3pw]

Man I'm s Chevy man but damn that truck Cleetus has is a bad mfr. I've always loved regular cab Silverados with 6.0 and a Whipple.

[@Djjustus181]

Full throttle is good people , nice build

[@procheckautomotivemechanic4551]

Ditch the factory map sensor and use the Haltech inbuilt map sensor. Hit me up for remote tuning and we will get that 400 easily

[@Robert.84-]

Never say it’s going to be your last run. Bad juju

[@TTSFabrication]

It would absolutely make closer to you 400 number in 4th, 3rd was killing the power.

[@jakhy1198]

Great vid, just a little fyi, gearboxes are rated for measured torque, not horsepower and this could be why some people are good at 600hp on some setups and not lasting on a torquey 300hp setup. Food for thought

[@Noastrenght]

The good old water tide, good to hear it.

[@rgreerjr]

The reason you only put down 320 may be that the "E85" you bought wasn't actually 85% ethanol. Without checking the ethanol content of the fuel it could be anywhere between E50-E90.

[@neilr1556]

It's around e75

[@MotorSwapDan]

If they never pushed it hard enough for knock then the fuel ethanol content wasnt a limiting factor

[@ldturbom3368]

Not true. I’ve made close to 700 horsepower on e54 here in Arizona. Our pumps have ranged anywhere from 54 up to 85.

[@MotorSwapDan]

@@ldturbom3368 agree, the fuel is not the fault

[@garyhowe88]

When testing I didn't see a huge difference between e50 and e85, could push both way beyond the point where any extra ignition timing made zero difference.

[@zander4371]

Kyle hits 3rd like a champion 🏆 🥇

[@sportscarfan1989]

The full exhaust is probably a limiting factor

[@-mcfmedia]

👆👆👆👆👆 Thanks for watching and leaving a comment. Send a Dm to claim your reward📥

[@pepperfish_]

just an FYI you can break an oem transmission with 100 whp. probably less. 300+ whp in a little street car is a lot. You have a complete exhaust system on this thing? It will never make the same numbers @psi as a hood exit.

[@samadler5635]

get some air piston hood struts for it

[@EquitySolutionRayRaz]

Trying to sit here patiently to see how much time is left on the giveaway cause I been lackin heavy cause I run my own business and it’s end of the year stuff already killin me . Hope I still got a day lol

[@brenthodges7202]

I have a feeling the guy tuning didn't make cam angle changes. The curve looks way too linear for the setup. Should come in and hold pretty good up to redline instead of looking like a NA 4 cylinder like it does.

[@damnitbobby8438]

300 hp on pump gas sounds perfect

[@19961djs]

Remember u see that power on Honda drive trains and u have it mailed to the stock trans for the brz if I'm correct might be the gearing setup u have

[@BojanDrifts]

You should be dynoing in whatever gear is 1:1 or closest to it 6 speed trans is usually 5th maybe 4th but for sure shouldn't be 3rd

[@risingstar1309]

That dyno graph looks kinda spikey. Maybe some sensors are fighting each other at the top end? It seems down to me too, as a casual observer.

[@jdmhondafreak90]

Boosted Boiz to the top!

[@kennethgrisham9409]

I’d probably have a heart attack if I won this beauty

[@PriyankaSharma0216]

You gotta put link to merch in the description.

[@FNFAVORS]

Never been so stoked about a giveaway, good luck everyone! Thanks for building a beast guys

[@darrenmobley6000]

400 horse is gonna be a ball in that light of a car

[@technicallyeco.2751]

I like seeing random kswap give away wayy cool

[@ScottCouch83]

Wyatt is amazing 😍🤩

[@dannyjr7997]

Heck yeah Humble Perfomance ❤️

[@A.QPerformance]

Its RWD thats why WHP numbers are slightly lower to where Kyle was expecting

[@rgrattan]

It’s probably making closer to 400 in fourth gear. Make pulls in a couple different gears next time. Try third fourth and fifth. Fourth is usually the closest to a one to one ratio.

[@Drunk3nMas7er]

yep 3rd won't be 1:1 on a 6 spd on any car... def won't load it properly.

[@NSoutdoorsman]

kyle trying to be pumped about 300hp pull after ripping the hatch, odyssey and nsx all the time lol

[@-mcfmedia]

👆👆👆👆👆 Thanks for watching and leaving a comment. Send a Dm to claim your reward📥

[@jbirds1200]

Now you throw out the bundle after i already did the twisted tea shirt and coozie lol

[@bootneylee9802]

You should probably try whatever tune you're using for the video volume, because it goes from 0 to 100 in like 0.5 seconds.

[@boostedboiz007]

Congrats you have been selected among our shortlisted winners from our previous giveaway, Contact the number above on WhatsApp 🎁🎁🎁🎁🎁🎁🎁

[@modelnutty6503]

300 hp is plenty happy, reliable and good power on tap any anytime you want. you're still thinking straight line A to B quarter mile? things really begin changing when you're setting suspension up for a circuit track, improving handling to shrink lap times. not trolling the 1320' straight line stuff but maybe try more of the other?

[@Silentjustin06]

Dude I seen you yesterday in the yellow Porsche

[@ballenwallen]

it'd be sick to win that thing for sure. good luck everyone!

[@MinaTadros1]

The Haltech has a built in MAP sensor

[@newtonfirefly3584]

Still requires the actual MAP sensor attached to the location, which is connected to the ECU-PCM. That is what Kyle and Wyatt stated requies to be changed, swapped, upgraded. Also a flex-fuel sensor should be installed.

[@MinaTadros1]

@@newtonfirefly3584 it's as simple as going into the software and selecting internal MAP sensor instead of the standard K series one and running a vacuum line to it from the intake manifold.

[@newtonfirefly3584]

@@MinaTadros1 There still must be an electrical connection from the location for the MAP, if there is an internal sensor. They are using a FuelTech FT-550 with this K-swap FRS vehicle. correct ?

[@MinaTadros1]

@@newtonfirefly3584 Firstly they are using a Haltech not a Fueltech. Secondly, the built in MAP sensor is soldered onto the ECU circuit board. It doesn't get any more electrically connected than that.

[@newtonfirefly3584]

@@MinaTadros1 clearly You lack the basics with electrical, electronics, ECU-PCM. There is still a requirement with an electrical connection to the ECU MAP input from the required, necessary appropriate location in the engine compartment, on the intake manifold for the measurement of the air. All the Best Sincerely

[@somethinginthewater3802]

That torque curve looking like rough seas lol

[@deeloc6675]

I love Brent but I also follow humble and that boy alex has tuned some nice builds. I would like him to tune my cb7 when it's done in Texas

[@saulgodinez8393]

It’s cause Brent is not on the keyboard brother …!! Facts!

[@ryansworld2551]

Got a question Kyle if I buy Murch and I win the car I’m in Australia is it possible to give it to someone in the states because I plan on moving to the states is that something that can be organised ??

[@joshuajackson8142]

Boat T-shirts would be cool!!

[@Junioreg6]

Change out that log manifold

[@TymanBert]

Damn that SRT4 in the background !

[@TheJohnb35711]

330 wheel... It really is a Subie!

[@recklezzfocus7199]

Tell Brent to pull out that dyno sauce iykyk!!

[@young11984]

I was hoping for more since i have the same combo, mine will be with a C4 or TH400 trans and 8.8 rear in a 2600lb car. Will hopefully be in the 400whp range for a daily driver on E85 only and 3bar map

[@Fizzer99]

The HP numbers are a bit low because it's rwd. fwd cars will show more power on the wheels because of less drivetrain loss.

[@newtonfirefly3584]

Though certainly true that there is more power loss through a front engine to rear wheel drive train, clearly You are lacking the proper assessment, evaluation, description since measured torque and power only increased slightly, and less than with fuel with significant ethanol compared with normal unleaded fuel with ~ 15% ethanol. Most are unaware that "E-85" at the fuel stations is actually commonly 40% ethanol, sometimes up to 55% and in the summer and warm temperature months it can be 50-65% ethanol. The racing fuel sources are reliable for getting proper E-85=C-85=85% ethanol as used within NASCAR, and higher concentrations of ethanol E-90, -95, -100 used within IndyNTT [switched from 100% methanol, M1, since 2007] and methanol, M1. Sincerely

[@Fizzer99]

@@newtonfirefly3584 right.

[@newtonfirefly3584]

@@Fizzer99 is Your reply sarcastic or actually an agreement ??

[@CesarsCarCorner]

It would be a dream to win that car! She is very clean, and someone will have fun with the car!