The Mr2 FINALLY Gets Lexan Windows and We Fixed The Door!

[@SirGrogg]

Yeah. You should really think about AT LEAST welding some rod to the edge of the door jam for those latches to grab onto. The ends are curved so they kind of wrap around the u-bolt. You were pushing on it and it was giving a lot. Also, it’s not the wind getting under the window that you have to worry about it. When planes fly it’s not because of the wind that goes under the wing but because of the wind that goes over the wing. A simple science experiment is to take a sheet of paper and blow over it, and the paper will pull up words. You need to have that latch a lot more solid because it’s not the wind that’s going to get under the window but it’s going to be the negative pressure that is pulling out on the window as you go down the track.

[@benjaminmergele333]

“Are those doors real carbon or just a wrap? “ Kyle: “Both” 😂😂

[@fullsendmarinedarwin7244]

Just like a GR Yaris roof

[@gary66669]

I think he should wrap the whole car.

[@user-el4ii7zq6l]

🤣🤣🤣🤣

[@alxgu198]

Lol nice 😂👍

[@tbusch63]

At $1500 Bucks for the Carbon Fiber doors. I would bet damn good money, they are real Carbon Fiber Shells! For 13 years, I used to build aircraft Air ducts and other parts, used on aircraft like Boeing, Airbus, Bombardier, and Cessna!

[@josephmatuszak3855]

For the window clamps, maybe fold a small taco of metal around the latch spot on the factory A pillar to extra support & a ridge for it to hook into. Past that the repair/upgrade looks pretty good!

[@snarl3027]

Said the same thing. Seems a lot of comments on the same page

[@ddevil4980]

Or may build up a weld and shape it.

[@wrastlinryan]

Good looks, I see a few of us had the same idea!

[@Avboden]

or even just weld a bead below it. It absolutely could slip off that

[@BIGSMOKE-bl2lq]

​@@Avboden almost slipped off when he push on it haha

[@bumsoil]

that window clamp needs a bead of weld right where it grabs, that WILL pull off at 150+. That's why they provided the metal hooks. Heck, even with a bead it might be an issue if the clamp does not suck the window in enough.

[@joshcoffman14]

On the window clamps I would weld a piece of round stock to the area where you are using the cars structure to let the latch grab at so the curve on the latch will wrap around the welded round stock and not slip off the smooth surface. Seems like when you pushed on the window it had to much movement, but the door looks good considering it's 180 mph departure. good luck

[@lafollettegarage4019]

I'd put some vents into the rear quarter windows to help with cabin pressure relief

[@tarungonneea4614]

I do a lot with jet boats commercially. Be careful with the bucket. It’ll rip cables and if you are going to fast and slam it down you’ll nose dive, as you clearly saw. You guys can also get pneumatic actuated pistons to move the bucket, they’ll do crazy work and they’re programmable, meaning you can can a real two step and launch!

[@Bluedino6996]

You guys should def keep your tunes in a live folder such as iCloud or OneDrive so even if a device you are using/modifying the files on gets damaged the files will still be in a safe location

[@nmcovert]

That door IS going somewhere, when Kyle pushed on it the latch almost came off. Now im anticipating the same thumbnail as the last door incident.

[@danh2360]

Wyatt nailed it, on my not quite 70" tv I can see every blemish but on my phone I can't even tell the door ever smashed the track at excessive speed.😮

[@Skiridr22]

I think you should double check the other door to make sure it’s not separating

[@junkyardripper]

Yeaahhhh was just going for this comment

[@touchingclouds2317]

but then he wont have any more clickbait videos coming like: "OMG the second door exploded and hundreds of people almost died!"

[@madmod]

@@touchingclouds2317 Shit happens when youre racing dude. Pretending stuff doesnt break is so fake.

[@brock83196831]

@@touchingclouds2317 yeah idk what tf you're on about but cool, nice story.

[@t.j.furness]

I was thinkin' the same and maybe even wrap IT Too, the little bit goin' over the edge would keep the air out and help prevent it from splitting..... and it would preserve the actual finish underneath hah.

[@boostaddict_]

Saw Brent's video working on Razzle Dazzle, your old starter may work on the new trans. it's a HiTorque, some of them have a faceplate drilled in about 3 different spots so you can rotate it on the starter to move the solenoid. Worth looking into.

[@Shadow0fd3ath24]

the body of the starter hits too though when the trans isnt lifted way up

[@ClumsyCars]

@@Shadow0fd3ath24 the old stater is a completely different design

[@jeremyfowler7505]

Side bets on the windows still being sucked out. The wind dont travel how you are thinking. That will build a low pressure and suck them right off. I would atleast weld something there for them to hook to. The window will bow enough for it to suck the lock passed the door frame.

[@lilmike1780]

11:36 that 3m panel bond is absolutely no joke, when I worked in a body shop we used that to reskin doors when insurance wouldn’t replace them. I hope it holds as well on the carbon fiber, best of luck guyz

[@nikolaskipp769]

If you use enough clamps on the flanges. Looks like they were lacking in the clamp department

[@nikolaskipp769]

@Ben Sprink it's a mangled carbonfiber skin and I seen plenty of gaps between the shell and skin

[@nikolaskipp769]

You aren't gonna roll the carbon fiber over the flange. it needs clamping force

[@tma4137]

@Ben Sprink no you didn’t

[@tma4137]

@Ben Sprink idk

[@epjetta]

That panel bond is no joke. It will literaly tear the metal off of sheet metal if you tear it apart. Great stuff so i hope you have no problems at 190+.

[@josephcitizen4195]

That wrap looks........great, considering what you had to work with. Good job Ryan!!!

[@gmane1989]

How many people forgot about that silver full tube chassis civic that Kyle bought?! Cjrc just reminded me of it. Would be cool to see that thing get some attention and maybe they could be part of it as well..🤙

[@BDJones055]

Good Jon Wyatt. I work with carbon fiber and 3m composites everyday. If you prepped well enough, that door will never break on those repairs again. It will always break somewhere else. Also that panel bond is serious shit. Do not worry about the door coming apart, worry about the glass staying in and the hinge mounting location.

[@tbusch63]

You didn't mention Nylon peel ply, so shit💩doesn't stick to their tools, and everything else. Been there, and done that! building Aircraft air ducts and floor panels, some of that adhesive is seriously Gnarly shit 💩!. once it is on? it sure as hell doesn't come off!.

[@gordowg1wg145]

I's suggest running a couple of beads on the door frame edge, so the catch has something positive to catch on if it 'walks' from door and body flexing during the run. Just takes a couple of minutes, including paint touch-up, to make sure it's secure.

[@bryduhbikeguy]

Finnigan's Garage Had a "neutral Scoop' made with 2 sideways outlets for the outlet,and an "Air-popper cylinder" for launching.Revv it up and Pop the button to open the jet.

[@craigpardue1700]

The Forward/Reverse lever on the boat is backwards. Your build, but I would flip the linkage arm if possible.

[@Bu5H84]

DAMN!!!!!!!!!!!!! Boiz you hear that Kyle is now a Sir mad respect, its so awesome to see how much these Boiz have grown over the years, keep it going Kyle you are doing amazing.

[@Greg1096]

A few rivets for insurance might be the way to go on the door skin

[@bullhead360]

I broke the aluminum reverse bucket on my jet boat blipping the throttle while it was “in neutral”…. that’s a lot of force/pressure against that bucket…

[@sdrawssakcabfrog13]

I so enjoy you guys are the youngsters! You still keep the fun in the work you do!

[@cleric670]

Just trim some aluminum foil speed tape and go around the front edge of the door if you're worried about it. That stuff is good for 500mph+ and you can get it in black so it would barely be noticeable. For the weekend just use some HVAC aluminum tape from Home Depot. When you end up getting another door go around the front edge with 3M clear bra tape 2" wide, it applies just like any other clear bra and is a permanent install.

[@MrBest4tyres]

you need to add somethin to stop the window catch from sliding off the lip its designed to grab round the part you left out not rest against somethin

[@jonkeau5155]

Hey Kyle, if you ever have a hard drive/flash drive/sd card corrupt or get deleted you can usually recover most of it if you run DiskDrill right away! As a videographer and photographer this is the best software I’ve found so far!

[@tccurtis2932]

Man the HATCH looks awesome in the background. Adam did an amazing job on it. BodeVision is the man..

[@ryanhogan1561]

Since y’all never touch that Yamaha in the background y’all should give it to me. I’d love it and use it everyday lol 10:26 11:20 also I absolutely love the jet boat content. You’re living my dream my friend. Thanks for bringing us along with y’all!

[@DutchDayzGamerz]

Maybe a little tip for the door drill a few holes around the edge and put a rivet trough it with a washer in front and in the back for some extra strength

[@pFbSpecV]

That door came out great! I’m impressed! Time for a built motor on the boat!

[@marcusschneider1702]

So glad the door went back together. I’d seriously look into putting something on the windshield frame atleast. The clamp was slipping off as you pushed on it.

[@MUTP-zq1oc]

Now you have a chassis shop that can really do a number on your tube chassis em1. 💪

[@jlewis8521]

Please secure those window latches a little more. They very well could hold, but thats a good bit of air pressure, that will be causing flex which can push that arm pass the fail point. 30 mins of grinding and welding could save a larger headache.

[@CJRaceCars]

Appreciate the support. Hope we can do something together in the future 💪🏻!

[@jsigafoo]

i know y'all are too busy building race cars to make videos but the bozi could really help get your channel to grow. looks like your shop has changed around a lot since your last video

[@CJRaceCars]

@@jsigafoo we are going to get back to doing videos again soon.

[@ianthayer9213]

It may feel more comfortable if you throw another linkage in line to the reverse lever on the jet boat. Lever back for reverse, front for go time is more natural. I don't know how far you want to go with it but you could also get a setup where there is friction and click locations to feel where you are on the throw.

[@SCHAWIINNGG]

1000% missed the opportunity to say "2jz no shit?" 😂😂

[@TheZmt325]

That door did a 180mph solo mission into the track and wall. It now looks a solid 90% Im impressed.

[@ThatHoodlum19]

So friggen sick boiz, all of it! The boat, the MR2, its all coming together so nicely. Whyt is the man!

[@NazTron187]

Neutral should be about 50/50 covering the nozzle just a fyi so the jet is shooting back and forward adjust up or down to stay in place. Also it’s caving because the reverse bucket is shooting air into the intake

[@ObsessionFPV]

CJRC really took off the last few years with the NPK exposure. Happy for them being as I'm a Polk County Native. Love seeing what they're capable of doing!!

[@ForzaNationX]

its funny because the door is real carbon fiber and wrapped in carbon also aha awesome!!!

[@ChairMan71196]

Ole hatch shinning bright like a Diamond in the background sittin pretty.

[@Vetteman372]

Door looks not too shabby. Good job. I'm surprised it worked out that good.

[@eddominates]

That green water is perfect, looks like you're boating in a lake of Monster

[@eddominates]

eyyyy it's Cam! Already know of him thru Swanstroms channel. And Tye used to work there. cool to see you guys collaborating

[@chrisabernathy1082]

Need some Reverse NACA Ducts in the quarters to relieve any built up cabin pressure.

[@getouttheguns8179]

The MR2 is looking good, really love the jet boat, it is really bad ass, CJ's does really clean work

[@jordantobins681]

Watching Boosted Boiz before any other video, including ole Cleeter! You guys are killing it ;)

[@rexxx927]

Man I love that boat great job motor to pump bow to stern flip the handle bracket forward is forward reverse is reverse lol cheers!

[@StingrayOfficial]

Nice freakin job on those windows! I think like some people are saying, it's LOW pressure that is sucking the widows out, not air getting under the seal.

[@Jk-wh4ds]

For the future. You should never leave the delaminated layers on. And your layers should increase 25mm every layer.

[@skm9420]

Remember when doing any fiber repare that more resin makes it less strong. You wanna use the least amount of resin possible whether its epoxy, vinal, ect...

[@jamesfrost5261]

Pretty sure that panel bond is all that holds the body on corvettes to the frame, and thats all that holds them together. I dont think you will have any issues even at 200 unless you have something catching the wind really bad.

[@Youcallthesebagels_]

Oh no, Kyle says “Cue-pawn” 😂

[@thomasg5331]

Panel bond a v strip of aluminum around the edge help keep it together

[@budddove6480]

Great fix on that door guys, looks waaaay more presentable. Looking forward to seeing her run.

[@mjay6245]

That method of neutral is pretty hard on those parts. Just be careful you dont hold it on it too much

[@lifewithlenny2696]

Which parts are they hard on exactly??? When the bucket drops part way down it simply redirects the water flow so you won't move forward anymore, how is that any more wear than using it for reverse?

[@Garage.Philosophy]

7 sec MR2 , 800hp hatch , wago , the Porsche , razzle dazzle, the s14 , cage civic , suzi, Tesla plaid , k series air boat , k series jet boat ….. you guys have quite the fleet growing

[@chrisstockton7153]

That panel bonder is good stuff, I used it on a Peterbilt hood and it's pretty dang strong now. Stuff dries hard as a rock

[@dragpix]

I ran a steel cable from the top of the door frame/lexan frame center down to the center of the door so it couldn't flex out at the top. no issues anymore 150mph+. also acts as a handle. had exactly same thing happen and split same spot as yours

[@quickdeuce]

Many of we NPK fans first met Cameron Johnson as he was building Justin Swanstrom's "PreNup" Lexus. CJ does build some primo race cars.

[@ShnilChay82]

CJR is where Justin Swanstrom & Monza are getting there NPK cars built. I'm pretty sure the 70Nova was getting built for Justin at one stage? Can't wait to see the mr2 at Indy.

[@2HavicMusic]

holy hell chillin with yall would be so fun. keep killin it

[@E36_shayne]

man i freakin love watching these guys! keep acomplishing those goals and ill be here to watch for sure!

[@TURBOTRISTO]

Kyle you just keep inspiring me to grind harder on my channel thank you

[@stephenedler2294]

You need air relief holes in the back window

[@eastyyx]

Always gotta stop what im watching for some BoostedBoiz👌

[@seanthompson6720]

what is the weight difference now with the Lexan and metal rod vs the factory glass

[@shifty1927]

That 2j celica looks like the old titan then gas motorsports drag build from about 15 years ago.

[@Larfinkle]

Lots of great things happening! The MR2 is always great and I hope to see Suzi make some runs!!

[@TheZDog]

You could add a flap (solid steel welded to a hinge) behind the brake lever that once you start going forward it falls down behind the lever stopping it from going too far backwards unless its lifted up, that way you still have some brake but not enough to sink the boat and you could slam the lever hard in emergencies but again not sink it.

[@drakeherman16]

Dude what a solid connection CJRC is topdog chassis work.

[@britishpitbikerider1783]

Kyle, you should do a Tour of some states with the cars bro, "The Boosted Boiz Two Step Tour" you arrange venues where you travel to with your cars gor meet and greet showing people the cars and obviously finish it off with two step battles between your vehicles, heck you could put the jet boat on a trailor and two step it against the cars 🤣 it would be awesome, you could promote it on your next videos to garner attention, i bet 1,000s would buy tickets to the tour.. i know i would.

[@jonathanhawkins3269]

We use rapid set 3m panel bond to mount a hook to a 2000 Honda Accord roof and pick it up with a forklift that stuff is the best

[@eskawater]

You have a neagtive trim... you need more weight in the back mabe on the plateform to give the boat a slighly positive trim ...

[@brianramos4471]

That sound the car window made 😂😂 19:50

[@voxexquis]

Damn, that poor door. Maybe a little trip over to Bode and some paint on those and the MR2 is in the future 😉 Good luck in Indy boys YEE YEE

[@tetracontrol]

Fueltech was developing a traction control for cavitation, you should check with them if it's available

[@haydenroyer]

That doesn't make since

[@fullsendmarinedarwin7244]

You can calculate slip % using a simple speed vs. rpm calculation, be similar to traction control in a car

[@legros731]

​@@fullsendmarinedarwin7244 lol cavitation is air bubble in a fluid exploding and taking micro chuck of steel with it Its a big problem in hydraulic system Don't know what op trying to say it doesn't make sense

[@ballistic02]

should heat up the oem mr2 frame where its latching and bend out a slight lip so its extra secure and cant slip off..

[@pudermcgavin4462]

Panel bond it's some crazy strong adhesive freaking love the stuff!

[@michaeljohnston6856]

Y’all seem like two of the most relatable guys on KZbin.

[@bryanchapa2879]

Love the windows....but that latch hoop I would want on IMO...but I have no experience like you all so ..send it !!!!!

[@PflaumerBen]

i love how kyle talks to us like we have turbod k swap jet boats lol

[@montrealstreetcars4891]

Do the nose dive!!! I used to do it all the time on my SeaDoo Challenger 2000. It's a blast

[@tbusch63]

LMAO, "Put it together like a double-stuffed Oreo!"🤣🤣Wyatt, Bro, Carbon Fiber, and Fiberglass are cousins! You master one you master both. You got this man, I look forward to you getting your truck the F**k out on the track man. and Pushing it to the max! there are major improvements left there! Some of the "white spots" can be fixed if you dremel down into it a little or use an Exacto knife to poke the outer surface and put more resin in it, you can thin it with a small amount of acetone. use a heat gun to help it flow into the voids! I built Aircraft Air Ducts and had a bit of experience in that (13 yrs.). I used to "Slosh" the parts with an external coat of resin to seal the outside of the air ducts before they were cooked in an oven and finished for use!.

[@Matt_Ryce]

Them 360 skids in the mini jet boat look like a freaking blast

[@redneckhippiefreak]

Heads up//The issue with window bulge isn't really with the Outside air,,its about the Absence of it inside. The cabin is put under pressure and the windows bulge out. A naca duct should help equalize the pressure at speed.

[@lilmike1780]

19:08 are you gonna cover up or put the side view mirrors back on, might that help keep down that constant pressure at those high ass speeds?

[@andychapman6646]

You can buy really nice precut lexan windows with the factory black trim around the edge. It's actually really cheap. I forget the name of the company. Ask Adam LZ that's where I learned about it and ordered them for my car.

[@randyburch6306]

You underestimate phones Wyatt, we could see that detail since like 2015 😂😂 Great repair and great job hiding the carnage though!

[@snarl3027]

Weld a tab on the door frame for the window lock to catch on

[@BigBallBearingturBo]

Damn, look at my Boiz! We done moved up from eBay turbos to Amazon carbon fiber repair kits! Let's Go!

[@burgessschnitzius4987]

Wyatt. I can see it on a 55 inch TV . Looks great. Now go get McFlurry.

[@GickelsGaming]

you guys CRUSHED those windows! BEAUTIFUL!!!!

[@mckrackin5324]

Door looks pretty good on 55 inch screens ;) I hope your firewall is sealed good so you don't build high cabin pressure. Might even want some speed holes in the back somewhere. I don't know the physics of that. Just spit balling. Good luck and be safe.

[@keefespencer1173]

I would put two window locks on the lexan maybe one right at the side of your head if you're looking forward and I hope that you guys get as much footage as possible up in Indy of all the events especially of all the drag racing

[@make-it-work4u]

If you put a forward facing piece of aluminum on the top of the windshield it will deflect the water from going over your window just like old school day cruzer jet boats back in the day.

[@dbldouble2018]

You need some lexan cleaner, they will scratch super easy. Looks great!