Another Outstanding Paracord Bracelet Brought to You by BoredParacord

[@SDMF3076]

Just made it and instead of doing the cobra weave in one color at the bottom I just treated both left strands as one and both right strands as one and then did a cobra with all of them. That way it locks them all down nicely and keeps all the colors showing. Also I tucked the ends inside the back of the weave and then melted the end so it doesn't show on the front at all. Really love the design.

[@LRCR]

Think I'll try a little different variation on the weave for the 2 outer strands 😁 Thank's again Shaun for Sharing the Inspiration ✌🤠👍 HFLPRCing =Having Fun Laughing Playing and RCing 👍😎👍 AOAH =Association of Addicted Hobbiest 🙏 SSPH =Stay Safe and Play Healthy 🌟 Blessings from the Great Smoky Mountains East Tennessee

[@HeyHrach]

Definitely going to make this, but I'm going to melt the green and black ends together to make an easier, smoother transition to work with. Thanks! I'm also going to try it with red as the main cord, and black and yellow as the side cords, so it looks like fire. :)

[@hayhay8335]

Iv just bought lodes of paracord and it came today. Can't wait for my days off so I can get making. Love the videos. Will be watching the, a lot this weekend :)

[@dylanmitchell0718]

I’ve ordered your “big neon” set of paracord and buckles from Amazon twice 😎

[@meredithlouise]

Thank you so much for your camera close-ups and your methodical and slow speed with explanations. I’m not an expert, but this is by far y he best paracord bracelet in striction I’ve ever seen. Thank you!

[@comaduro66]

great looking bracelet yet again, however.....@Shawn Matthews....the beginning where you put the two colors (black and green) through. I came up with fusing them first so you don't get a meltspot when you cut them. also this way you don't need to cut those two when you finish the bracelet....makes it a little better looking, at least in my opinion....other than that, great one once again !!!

[@comaduro66]

Yoav Attias what, this guy is an ass....who, Shawn Matthews that's who

[@SashaKing-cm7wt]

I love this pattern. I've been trying to decide on a name, because Nameless seems to not fit. Genoese Cobra seems to be where I keep landing.

[@MrScubaPom]

Just finished it but with 95... freaking nice 3D effect... but man my thumbs are on fire . Love your channel

[@CarlosRodriguez-tw3rs]

Good job looks kinda like the half stitch

[@babalunn]

you are so smart to even figure it out

[@MichelleClaire40]

I made this with just two colors. Came out great I think. softball colors

[@rebeccatajak2774]

So if I were making a 22-in dog collar how would I measure the length of paracord I would need for three colors

[@jacobwelch914]

looks cool I'll try it today . thanks for the video grate as always

[@skylarwemhoff8367]

could post another video maybe of this bracelet. without a buckle or is there a way to make this without a buckle

[@timothyb166]

Shawn, I think you should call this the Genoese Wedge!

[@Loyalki]

definitely!

[@paramedic70002]

At around the 7:30 mark, the partially completed bracelet looks oddly like a Tim Burton character.

[@tabiathalavalley9244]

is it really 10ft...i cut 10ft it seems too long..is it inches?

[@Loyalki]

Shawn do you could you try to make the Daisy paracord bracelet that I saw on Pinterest? I asked another paracorder(?) and they said sure, haven't heard anything still though.

[@nancymendoza9215]

Hi! Can you do one with the Autism Colors...I'm really want to learn how to do them....please

[@sune7482]

What should I do to end the bracelet if im doing it with loop and knot?

[@davidbabin387]

Shawn, I'd like to ask you if, by KZbin rules, do you have to make your videos to a certain time limit, or is that your decision?? You explain the weaving very well, and there is nothing boring about the projects. You do the projects in your own way, and that sets you apart from other videos. Some do not talk, sometimes is very difficult for beginners, I know I am always stopping, rewinding, and watch the step again, and again, but with you,, it seems after about two or three times of watching, I can make the bracelet pretty accurately. May I suggest that you always give the length of the bracelet when done, give a measurement of all colors used, and the size of the buckle you use....This, to me, would be very useful info...Thanks for what you do, and do so well.......Paracord On my friend!!!!!! And I do try to watch all your videos, it is almost religious too me!!!!!!! Your methods are what sets you apart........

[@lorikishlock4843]

u can go into settings and slow down videos

[@Rusty23440]

@@lorikishlock4843 LOL ! I didn't know you could do that ! I just went into settings and slowed it down slow as possible then played it again and LOL at the slow speaking - I wasn't expecting that - didn't even think about that before I played it again ! Couldn't handle it though so I had to turn down the volume ! Thanku for teaching me something new today 😂 Also for helping me because I have to do the same as above - rewind again and again because I'm a newbie.

[@charlesirigoyen2804]

Hello, greatings from Mexico I just want to make a question, how many milimeters is the cord you use in your videos

[@supern0va336]

I'm making every single paracord bracelet he made and I'm selling them, but I'm give credit to you @BoredParacord

[@JORDYNN1220]

would it be possible to make this wider? like 1.5"-2"? would love to make it a dog collar

[@bebe.1972]

How could you start this out if you wanted to make a key fob

[@marleebelcher1179]

Cool I like this weave, I think I can do it

[@DavidHiggins66]

Would like to see a video on Viper Striker bracelet. Thanks.

[@kevinpurnell1431]

When you come up with bracelets do you just try new things or you actually plan them out

[@МуратБексеитов-г3х]

Hi brother how mani feet you for taking the segments???

[@aaronkirk1371]

Hey great bracelet you earned a subscriber

[@williamgibson5536]

How about some 'Shockcord' creations?

[@aharonsailor6134]

Have you thought of a name for this design? If not, I thought of calling it the Cobra Overlay. Let me know what you think...

[@kparkslpnful]

Hey guys I’m wondering if this can be made into a keychain instead of a bracelet? My ex (and oldest 2 boys’ dad) is a huge LSU/Saints fan and also suffers from a genetic disease that causes cirrhosis of the liver and is waiting for a liver transplant. He’s had 3 in the last week but hes so sick he has to have a perfectly healthy person who has never drank/done drugs and lived a relatively healthy life even as their diet goes and he can only have a full transplant. That’s a rare thing to come by in this day and age. I know this is a very long comment to simply say he doesn’t have long and i want to make him something he will enjoy with everything he has left.

[@lauradowns8091]

How about the 'Genoba' lol

[@jeje2x]

I Would Like To Know Being the paracord Purchase no Brazil too?

[@BoredParacord]

Yes, we ship to Brazil all the time.

[@jeje2x]

And More Tale of the paracord ?

[@dylandupree2868]

Call it Solomon the Wise!!!!

[@alyssagralla5931]

How about "The Cobra Kind of Madness"

[@ismarferreirasilvadjavan7389]

Qual linha e essa? Qual a grossura?

Paracord 550

[@hectorbenet5239]

might be the Great White

[@JrFans88]

Have you came up with a name for this one yet?

[@jacktregar8525]

asome

[@katerochford1221]

How about a zigzag

[@emilyparrish1832]

1st not counting Shawn :)

[@Driftkid1153]

I don't understand why parcord youtubers take there time with the cow hitch or the start to connect to the buckle I really doesn't take 2 minutes to show us

[@Emily-bb1du]

1st

[@AmericaFirstNow]

I'm new to paracord, and you have me waste a lot of cord. I like some of your stuff, but you gotta get your measurements together for us new guys. Good bye.