BORING, TURNING AND CUTTING - 4410 SHERLINE LATHE

[@roylucas1027]

It is wonderful watching your videos again. Thanks for coming back to the tube.

[@tryally]

Hi Roy, thank you so much for the kind comment, I'm glad you liked my YT videos.

[@stefanhertweck]

Luiz, great to see that you are back on KZbin!

[@tryally]

Very nice as allways. Hope your QCTP comes to market soon Hi Stefan, thank you for watch and likes, I'm glad you liked my videos,. Look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome!

[@donhardek9338]

Sir so glad to see your videos. Hope all is well. Thank you for sharing your work.

[@plnmech]

Good to see you back Luiz.

[@marcoam2610]

0:11 what material is the t-slotted table made of? Is there an morse taper #2 option for the spindle? the machine base - is this cast iron or cast aluminum/zamak? thx!

[@tryally]

The machine base is Cast Aluminum, the Sherline uses 2024 aluminum alloy in most parts, the bed is cast steel, looks like 12L14 to me. In general it works well and has good durability. As for the morse taper, I am not sure if have taper #2 option for the spindle, but surely there must be some information on their website. All my Sherline machines uses Standard Morse #1 Taper Spindle Headstocks.

[@haroldkreye8770]

Great video content as usual, Luiz.

[@ShnitzlHaus]

glad your back Luiz, long time watcher Mike (canbaja5 long ago!)

[@tryally]

I Mike, I remember well you my friend, you are one of my first YT friend, nice to see you again, and how are you?

[@holton345]

I just sent you an order for one of the QCTPs you make and sell. I hope to receive it soon. I have an old Unimat SL that is a really nice machine, and your excellent tool post will make it that much better.-- Wade

[@tryally]

Hi Wade, thank you very much for your purchase. Your QCTP has been shipped and is on its way. I am sure you will love the kit. For use in the Unimat it might be more suitable if you put a riser block on tbe headstock. Any questions you can call me on Facebook or my email [e-mail] Luiz

[@Liberty4Ever]

I have missed your videos. This one was very impressive! I knew the size of the Sherline lathe but it was easy to lose perspective until your hand came in to clear some chips and suddenly the lathe and aluminum work piece looked much smaller than my brain kept assuming it was. :-)

[@tryally]

Hi my friend, thank you so much for the kind words! I'm glad you liked my videos, it is very appreciated. I'm uploading a new video right now an thing you will like as well, 3 MM thread milling internal and external in 12L14 steel on the 2010 Sherline mill. Look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome! Hope see you again!

[@santossantos8655]

One more amazing performance!

[@tryally]

Thanks buddy!

[@phucnguyenCNC]

Very good!

[@tryally]

Thank you, I'm glad you liked!

[@asthort]

Nice work. I do work on the sherline lathe&mill aswell hope you get your tools to market soon I would be very interested.

[@tryally]

Thank you so much for your intereste and comment, when the tools to be ready I will warning you certainly.

[@adam.southside]

Thanks for the videos - What's the smallest dia. you have machined on Sherline lathe ? Have you also been able to cut watch wheels on Sherline lathe/mill?

[@tryally]

Thank you for watch my videos Adam. I'm working with practically any diameters, very tiny pieces with my Sherline, these machines works well to do small things. Sometimes I'm making watch wheels, they have different types and sizes, some repairs etc. all made using the lathe and mill. Look at this too, more about my work, photos, watch gear, 4th axis, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome

[@auguottaviano]

Excelente amigo. Abrazo Grande

[@tryally]

Obrigado por assistir Ottaviano, fico feliz que goste.

[@jeantnk]

Tive o prazer de acompanhar pessoalmente este vídeo. Muito bom! Parabéns, Luiz!

[@tryally]

ahaha valeu a sonoplastia Jean!

[@plnmech]

Luiz, Does your Sherline equipment have metric or imperial screws? Are your tool posts and other mods to Sherline equipment available in the USA and if they are how do you purchase them?

[@tryally]

Hi John, Here I use both, the measure standard in my country is metric. About other mods to Sherline equipment I'm hard working to that for soon John, really tools and acessory making the great difference. The problemin Brazil is the big financial crisis because the corrupt politicians So I have no money to make it quick. I need a partnership for export for whole world. Thank you John.

[@isidoromaich7226]

perfeito mestre ^^

[@tryally]

Obrigado por assistir e comentar Isidoro!

[@melee401]

How do those machines handle 316L stainless?

[@tryally]

Hi Spencer, these machines works very well with any material type, to me the secret is a good cutting tools. Thanks for your question.

[@GrayCo]

Nice looking tailstock - looks much stronger than the standard tailstock from Sherline. How do I go about getting that tailstock?

[@tryally]

Hi, this tailstock is modified by me, I have a video about that in my channel, I have more some improvement in this part but I don't showed it yet, that gave me an idea for a new video. Look at this too, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome! Thank you.

[@sorstudios]

What ounce motors do you use?

[@tryally]

I'm using the standard Sherline motor, .775 N.m (Newton meters) 7.9 kg-cm 109.71 oz/in (ounce inch) 6.856 in/lb (inch pound) I love these motor, they work well.

[@BillLightner]

Luiz, are your lathe tool holders shop made, or bought items from sherline?

[@tryally]

Hi Bill, it is all made by me, is perfect and soon i intend to put on market, just need to overcome bureaucratic in my country to export it. Look at this too Bill, more about my work, photos, ideas, accessories, micro-tools etc.. facebook.com/tryallytech?fref=ts You are welcome!

[@linosouza6538]

Onde compra este trono mecânico, ja procuro a um bom tempo.

[@tryally]

Lino não tem deles no Brasil, só importando, toda via as vezes tem pessoas que trazem e vendem, Tenho um amigo vendendo um completo Torno e fresadora com todas as ferramenta e sem uso. me encontra no facebook e te passo o contato por lá.

[@lavachemist]

Holy Schnikes! How many Sherlines do you own!? :D

[@tryally]

Well I have six Sherline machines, three lathes and three mills. You know, these machines works well for me, so look at this too, more about my work, photos, ideas, accessories, micro-tools, everything I do using Sherline mill and lathe etc.. facebook.com/tryallytech?fref=ts You are welcome!

[@lavachemist]

That's great, Luiz! I'm really impressed by your channel and the work that you do with these little Sherline machines. I'm familiar with using bigger machines, but I just got a Sherline for my home shop. For now I just have one lathe and a milling column, so I can do milling and turning.

[@tryally]

It's nice to know, Sherline is good to make small things, I love these US machines, I am capable of quite a few cool things using the lathe and mill. Thank you Micvee

[@jeantnk]

Top demais!

[@40motomike]

??? and. did it come to market?

[@tryally]

QCTP is available in tryally.com or more info: facebook.com/tryallytech?fref=ts