Bosch vs DeWalt vs Makita. Part 1. Cordless Rotary Hammer Drills RHH181 Bulldog, DCH133, BHR241Z

[@sdgdfgdasdgsdf7354]

This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool kzbin.infoUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.

[@alexanderkononenko3996]

How can you use different class hammer drills and even compare them? I think you need to do more homework my friend ...

[@MrMaks18]

When do you start drilling?

[@robinalexander5772]

Makita battery housing is for shock absorption, this is why it's flexable. Gee read up on the tool before blogging on you tube. Then drill some holes. Dam some of you people need education big time.

[@ВладимирПыков-з5б]

Нифига не понял, давай теперь по русски.

[@gabotrial]

These three brands are really good so when i am looking for a tool i usually compare prices for the utility i need and then buy the least expensive .

[@hongtang8694]

Did police searching for you at the end of clip?

[@sandrik1976]

лет ми спик фром май харт

[@thetrick4fun]

Sandrik1976 That's right! :-)

[@ambibox9734]

с русским акцентом этот англицкий

[@sandrik1976]

AmbiBox The Best Человек хотябы пытается имитировать прононс, в отличии от Виталия Мутко,который просто положил на произношение)))

[@AI-007]

ничё, скоро наблатыкается, будет шпрэхать как на родном !))

[@АлександрКудрявцев-к5ш]

ин инглиш

[@sverrfehn8547]

Makita suspension on the battery connexion for decreasing/ reduce vibrations on battery cells...

[@yours_sincerely48]

I had the Bosch GSB180Li with brushless motor. I find it a bit bulky compared to my corded Bosch DFR24. It is not a good idea to have the big battery affixed to the centre body. It feel fat and not helpful in tight quarters while up on a ladder. I have tried the Makita and the Makita is very well balanced and easier to drill. The battery location at the bottom rear is good like DeWalt and Makita. The let down is Makita is huge for the given power. It should be a bit smaller to fit the 18V class of Tools. I hate Makita due to the finnicky handle rotation. Imagine packing up. Time wasted just to reset the handle location and into the case. The Bosch or DeWalt guys will hit the lift first before you done packing. I sold my Makita 2KG corded hammer drill due to this issue. I kept my corded Bosch as it is a good alrounder. One can change chuck from shanks to SDS in an instant and best of all it is not wobbly. For compact hammer drill I batting my eye on Milwaukee 12V hammer drill. It is good for up to 10 mm concrete drilling suitable for Rawl plugs and anchor bolts.

[@MrVTEC555]

Bosch or Makita for me. I use Bosch drills. Had one for almost 20 years and it stills works like new, just the batteries that have gone. I have a newer one from 2007 and that one is very precise and powerful. Batteries are pretty bad, but it's 12 years old. Makita is also very good, however they make the best smaller drills in my opinion. I haven't tried any of their bigger drills yet, but I reckon they are probably just as good as Bosch.

[@explorehunter]

You have bosch battery drill since 20yrs???

[@RayW808]

I learned how much this guy hates Makita's handle...

[@AlexKorshunoff]

Are you from Russia or Poland or somewhere same?

[@anjabo8448]

Cant u hear Russian accent?

[@MrTempo156]

​@@anjabo8448 A-a-ask! ))

[@Videogamearcade]

I do like the Makita SDS . It’s a descent hammer drill

[@thetrick4fun]

I used to think the same about my old corded Makita SDS, before I tried these Bosch and DeWalt.

[@donkeykong516]

Going with Mak because the brand worked well for me & I have their battery set

[@thebabbler8867]

Dewalt is the best. Without question.

[@J.L.R]

dewalt 20 v makita and bosch 18 v

[@leonk.1031]

J.R. Productions No Bosch

[@joesant1943]

Dewalt will NEVER be better than makita in any capacity we all know that.

[@ara211080]

and what was the result in real fire my friend, greetings

[@thetrick4fun]

1. DeWalt 2. Bosch 3. Makita

[@heckeepagan2670]

They all good rotary. I have a team. And in my team I have the Dewalt walt and the Makita. I repair cracks on cement roofs. Milwaukee is another masterpiece.

[@leonk.1031]

Heckee Pagan Bosch?

[@heckeepagan2670]

@@leonk.1031 Bosch is excellent. But it's hard to find here in PUERTO Rico U.S.A.

[@leonk.1031]

Heckee Pagan Yeah You’re right I habe the Bosch and my friend has the Milwaukee and my Bosch is was better

[@kainoamahoe253]

Great comparison video thanks for the info!

[@deepakghube]

Please suggest one for drilling

[@johnpaddy8195]

deepak ghube Makita Combi Drill!

[@deepakghube]

Thanks Jon

[@johnpaddy8195]

deepak ghube www.screwfix.com/p/makita-dhp481z-18v-li-ion-lxt-brushless-cordless-combi-drill-bare/2486j This covers most materials up to light-medium concrete. For constant Concrete drilling you will need an SDS. If you are doing multiple screws.. You want an Impact driver. Im sure you can find cheaper than the link. So dont just buy right away. One thing i can guarantee you is They are very reliable tools!

[@karammughal7225]

Love your vids keep it up

[@thetrick4fun]

Thank you!

[@loucifer4205]

Dewalt makes the best sds drills

[@dragogranic8171]

No, HILTI does the best sds drills

[@николайставрогин-к8н]

акцент русский

[@СергейЕфимов-ц4в]

Как же прикольно. Хочу заниматься электрикой - вешать вводные щиты. Нужен иногда перфоратор на аккумах. Рассматривал серию 18в от боша, что посоветуете?

[@thetrick4fun]

Из этих: Бош или Деволт. Макита слишком тяжёлая.

[@alexanderreinek7552]

7месяцев использую AGT ,если у вас достанешь.До 10 мм в бетоне.Лёгкая,с дополнительными насадками очень удобно также как отвёртка. 18V. Но только AGT professional.

[@Vikma]

узнаю акцент, хоть и не знаю английского))

[@СимоненкоОлег-д6ы]

Первое что не понравилось в деволт это пластиковая линейка,и отсутствие вибро защиты

[@Марк-ю8р]

Есть 263

[@Eugene_Paradox]

263 у меня, крутой перф

[@alexanderdrago9852]

De walt has just the body strong but in mechanical engineering it's fucking rubbish.Makita its Japanese art with very fine mechanical engineering.

[@jorgeredpsiquico.1504]

METABO es la mejor herramienta

[@artkom6905]

Maybe, hilti?

[@denpro777]

Дарова! Молодец. Стараешся! Акцент капец конечно... Смог посмотреть 2 минуты. Больше не выдержал. Практика тебе в руки.

[@tonomonster7795]

Fuimos timados!!!!!

[@J.L.R]

dewalt 20 v makita and bosch 18 v

[@thetrick4fun]

DeWalt 20v Max*. * - bull shit from DeWalt. It is actually 18v nominal same as the others. It is marketing. In Europe Dewalt mark their batteries as 18v

[@shivaelectricals5802]

I want to purchase DeWalt cordless drill machine so please share Indian price list

[@dillwiggle2]

No Milwaukee ? Hmmm

[@NEWMESSIAH2000]

обзор на гладильной доске как Ваномас

[@Artew100]

Это высший уровень. Ты не понимаешь

[@rayc1503]

My packout's with Milwaukee M18 fuel range. I've had the Dewalt & it konked out on me. I dunno maybe the switch or loose wire. Milwaukee's a different league. I have a few Festool items too. The sweet thing about Festools 18v & 12v range is that with the adaptor I brought. I can use my drill, jigsaw, circular and multi saw corded as well 😉

[@cali4484]

1-Bosch 2-Makita 3-dewalt

[@saraandrade1416]

Amir orange Dewalt é melhor

[@cali4484]

Sara Andrade . I thinks American companies spend billions of dollars on advertising . Most of American famous brands aren't as good as they advertise .

[@daytonwintle6051]

Bosch is a cheap POS. It's ok if you only use it a handful of times. But the makiflta and dewalt will hold up much longer in the commercial industry

[@harleydavidson4105]

Dayton Wintle Bosch is the best after hilti ! Dewalt and makita is garbage

[@leonk.1031]

Dayton Wintle No the Bosch will Makita and DeWalt aren‘t as good any more

[@TruongNguyen-hq6ed]

useless...Makita is the best.

[@johnpaddy8195]

How dare you put bosche in there! lol

[@TheRodriSosa]

Why man? You mean Bosh is way better or what

[@nestoralbanilmaco6477]

Que perdida de tiempo Has demostración y no perder tiempo en introducción.

[@rodericomartin6328]

Makita bess

[@takhingwong1978]

1) bosch , price $ 2300 HKD 2) MAKITA , PRICE $ 1800 HKD 3 ) DEWALT, PRICE $ 2900 HKD

[@thetrick4fun]

In Canada Dewalt is the cheapest one. In Summit tools Dewalt is on sale now and it is CA$120+tax (tool only). www.summittools.com/images/stories/Flyer/17_11_Nov_24Pg_EN_05.jpg Makita is CA$190+tax (tool only) www.summittools.com/images/stories/Flyer/17_11_Nov_24Pg_EN_03.jpg Bosch I could find only kit, which is CA$539+tax (tool+bag+2 batteries+charger) www.mississaugahardware.com/product/bosch-rhh181-01-rotary-hammer-kit/Default.aspx

[@MrVTEC555]

Bosch is the best in this field, they make less pleasing smaller drills, but excellent larger drills.

[@Rajasthan91-q2r]

Nambr

[@muratmurat1147]

Dewalt makita bosh

[@evergreennursery1953]

Vari nise thanks

[@RabanABurr]

Tedious....

[@modern-chiang-mai-pool-villa]

bosch will die bosch always dies

[@SangNguyen-rn6gi]

Ước j tôi có một em