Bosch wak28261 test mode

[@neilmeeson8761]

Great video, I'd replaced the door switch but couldn't find the reset instructions anywhere online to clear the error code, your instruction worked and my machine is back up and running

[@nnaled458]

you had the E16 code?

[@jonasgrubb8691]

Great post! Had the E21 error and replaced the brusches. Reset did not work but your video did 😀. Many thanks!

[@NorwayRoy]

👍THANKS!!!! 💪💥💥🖤🛠 This also worked on a Bosch Classixx 6 VarioPerfect WAB28266SN/01 that was stuck in E21 error code after replacing the brushes. Tried calling the customer support @BOSCH here in Norway(speaking with a grumpy Swedish person) but he would NOT give me any reset or test procedure,... only interested to book me a service appointment 💰💸😖 😞. Feel free to add my machine model in the video description if you want, so other people might find this video when searching for how to reset error code on my type of machine too :-) POWER TO THE PEOPLE! - Fight for the right to-> own - repair (and reset) purchased products!!!!🛠🛠🛠 😀 . Again. Thanks for posting this video. It saved me!!! 🙂🛠 🛠🛠💰💸

[@ElaÇelik-d4q]

Çamaşır makinesi çıldırdı

[@duncannewbury3157]

Thanks so much for this. You’ve just saved me having to buy a new machine!

[@georgewinski3268]

You are awesome. Bosh tech support could not or would not tell me how to do this. I'm stuck on a small island and this resolved my issue. Thanks

[@gerardlynch2151]

Thanks, that worked really well. Replacing the brushes was easy compared to finding a way to reset the error message.

[@bijo505]

HI Tim, Thanks for this!! After 2 years I searched for the same issue and I got this video again and that help to run the test mode. Thanks :-)

[@mattpennell1019]

brilliant thanks. I searched everywhere for the reset code for this model but came to this by chance on the third day of looking. Maybe somehow this could also be described as a reset code, not just a test mode. I think a lot more people may find it. Thanks again.

[@nnaled458]

which error code did you have? with this it was resetting the error code?

[@dalsingh4202]

what a star been looking for this for around 3 days worked 1st time thanks

[@Beanie1984]

You sir are a legend! Liked and Subscribed!

[@agnieszkakurtyka9994]

OMG, I love you!!!! Every other instructions were wrong, only your is perfect

[@TheLaundryCentre]

This video saved me on a service call the other week, I meant to comment. Thanks :D

[@yalrikabi2007]

:D

[@antonforum5092]

Thanks a lot, was really helpful! You have made a very good job with this video!

[@nadialabaere5837]

thank you very much for this video ,it solved my problem too .

[@ArtyomEryomin]

Good, you're testing!

[@Fundamensch]

Thanks a lot for this great video

[@waldemarolender3505]

👍 dziękuję bardzo super film uratowałeś 100 $ :)

[@Beanie1984]

Bosch bloke turned up today and I had to show him this video to get it in test mode! You honestly are a legend!

[@lawrencechola3069]

Perfect explaining

[@MisiaczkowyMis443]

🎉1000 rpm 1200 rpm 1400 rpm

[@jagannathpotdar144]

Good

[@CreeBreej]

I changed my worn down brushes (2cm in length) on my bosch after it gave me the E43 error. Tried various tutorials, & im unable to reset it or get it in test mode. WM beeps 3 times with E43 error. PLEASE HELP> MODEL> WAQ243D0GB/09 Been 2 months so far.

[@terencearmstrong3048]

Tim can you help me with my washer dryer. Problem was it would not agitate replaced carbon brush S it worked went through wash cycle ok went through drain cycle ok went into spin raved up but befor going into high speed cut off and went back in spin no error codes any ideas

[@nnaled458]

DId have the error code E16, changed the lock switch but couldnt only find this procedure everywhere : turn the right scroll wheel at6 then press spin then 7 o clock then off blabla didn't work. Your one seems ok !

[@carwashgaming3727]

you have talked about the error code, but is there a position for the dial it has to be in to check the memory for errors?

[@jacopomarianocentini9786]

Hi Tim I have a Bosch top loading washing machine Avantixx 6. Standard procedure's reset doesn't work, do you know the right one for me?

[@user-tim100]

Sorry no do not see many toploaders u could try some of the other test modes on some of my other videos

[@jacopomarianocentini9786]

@@user-tim100 I will try thank you!

[@obadaobadaa9038]

👍👍👍

[@enachenicusor4449]

How to reset E17 to this machine?

[@user-tim100]

Think e17 is anti flood switch

[@fangwang5673]

My machine is 28161, but the error code is E16. I followed your instructions, and found something different. Yours is 88 88, mine is 18 88. And when it seems done, it stops at 18 88 again, and never moved. Could you please help me with that? The mistake I made is overloaded.

[@user-tim100]

As far as I know e16 is that the door is open if not would need to see it yo fault find it

[@canparlak6093]

How do i do it at wat24480tr?

[@user-tim100]

Sorry not sure might be the same as one of my other videos

[@MisiaczkowyMis443]

1200

[@MisiaczkowyMis443]

1000

[@malikstudio773]

Busch washing machine arror cod E63

[@nnaled458]

Send us your paypal account ! seemns to be working !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@kuwaitbirds8775]

👍🏼👍🏼👍🏼👍🏼👍🏼❤️❤️❤️❤️❤️❤️

[@cemilfurkan1453]

Ariel Tide

[@Artenie-Ionut]

Masina bos la fel ca asta, de ce nu stoarce bine hainele ramane cu apa multumesc

[@Mielespecialist]

Bad motorbearing

[@user-tim100]

The original fault on this machine was the toc in the motor had failed

[@valerock87]

thanks, you saved me