Bottle 3: Suction Control: An introduction to 3 Bottle Chest Tube Collection Systems.
Пікірлер: 23
@durandkhadka84493 жыл бұрын
Thanks!!! It cleared my confusion on the working of suction chamber
@MidlifeCrisisTactical3 жыл бұрын
Thank you for this!
@mercynyamboji46402 жыл бұрын
Great information thank you 🥰
@RickyC21077 жыл бұрын
Amazing! thank you for your help!
@kimtunko4 жыл бұрын
이 아저씨 설명 잘하네..한번에 이해 됐습니다,
@angelatsuda5086 Жыл бұрын
Is there a reference for what pressure to use in pediatric chest tube for continuous suction?
@Snowflakebabysuen7 жыл бұрын
this is very useful!!!!! thank you very much!!!!
@priyankajanardhanan91174 жыл бұрын
Thanks for ur help
@doctadude872 жыл бұрын
I’m confused about your statement that the suction control bottle has no purpose if it doesn’t bubble @2:10. If the suction is set at 15 cm water, the vent depth is at 20 cm, then the vacuum control bottle will not bubble but it is still applying suction. If it is still applying suction, then why would you say it has no purpose?
@95Mattio Жыл бұрын
I have the same doubt. If we have a water valve of 2 cmH20, and a suction control set at a water valve of 20 cmH20 that is not bubbling, then an effective suction should range between 3 and 19 cmH20. Even if it's not over 20, it's still suction and making its job.
@apc020413 жыл бұрын
why is not possible that suction pressure is less than the depth of vent blow the water? u said that if it has no bubble,it has no function.
@fatemehsadeghi79992 жыл бұрын
can i use the this system for suction catheter?
@umarecol818 жыл бұрын
i have a question.. we are getting an exam about this but I don't actually understand why the pressure gets down when you put the suction on, can you help me with this ? Thank you a lot!
@Pharmapedia8 жыл бұрын
+Umoss Col Positive pressure and negative pressure are the same thing depending on which direction you choose to be positive, they both move air. When suction is applied to the chest tube system, you are applying negative pressure within the pleural space. If the suction control vent is not bubbling, the suction is less than 20 cm of water, once the suction control bubbles, applying more wall suction will only make the suction control bubble more, the suction control prevents more than 20 cm of suction (negative pressure) from being applied to the system. Hope this helps.
@stanleypsj8 жыл бұрын
can you explain why when you increase the suction pressure it will only create more bubbles rather than exerting higher suction from the pleural cavity? Also, what will happen if you do not have that safety valve e.g. connecting that chamber straight to a suction?
@Pharmapedia8 жыл бұрын
+Psyche The safety vent does not allow the suction applied to the chest tube to exceed 20 cm of water because the vent is submerged in 20 cm of water. So when we connect to wall suction, the safety vent will begin to bubble when the wall suction exceeds 20 cm, the excessive suction is compensated by the entry of air into the safety vent, keeping the suction applied to the chest EXACTLY the amount the vent tube submerged in water, 20 cm. If not for the safety vent, then excess suction, suction that exceeds 20 cm, can do damage to the tissues in the chest. Hope this helps.
@Camoflaged35 жыл бұрын
@@Pharmapedia it not only helps its golden
@miya44514 жыл бұрын
ohhh buble remains buble as long as theres a buble..
@user-ur9xm7yv3w4 жыл бұрын
I have a question... I don’t understand why the pressure remains constant in spite of the increased suction pressure
@ritathomas33534 жыл бұрын
Because it is submerged in 20 CMS of water only and it equalizes with the amount of suction applied
@user-ur9xm7yv3w4 жыл бұрын
thank you so much🙏🏻
@ritathomas33534 жыл бұрын
@@user-ur9xm7yv3w you are welcome..God bless!!
@avril58533 жыл бұрын
Did you understand? I still don't get it.. What does the 20CMS submerged vent have to do with constant pressure?