D.I.Y. Shooting Sticks for $4

[@Labyrnthdom]

This is old video. But just to help others with this. You can use castration rings for the pivot point. They will last years.

[@tedwright1380]

I made a set with the castration rings. Very easy to do. Pole price much higher in "23" but still a bargain compared to China sticks! BUT!!! This set up is not as stable as you would think! ( It's better than Offhand a little bit) the poles are very flexible. Using them with an air-rifle which has a much longer barrel dwell time is still a challenge when the kill zone is 1 inch or less.

[@MattmanR1]

Man going bear hunting with a bow and arrow on the ground runs from a bumblebee and his own house.

[@xenomorph1317]

First I thought this was stupid, but after watching all those other complicated vlogs of making gun mounts this is by far the easiest and best way for the same rifle support you need.

[@brodie16]

great video bud... shame that there are so many ignorant guys that can't appreciate the fact that you took some time out and effort to share... thanks for sharing!! ;)

[@URanInTheUglyForest]

Great video. The money saved on the sticks = more ammo!

[@shawnbebout]

Good idea. I am thinking of converting my snow shoe trekking poles into shooting sticks, since I already have them. I will just have to buy some camo duck tape, for sound insulation and to make them less visible. Same setup, I just need to figure out if I want to hold them together with my hands, the wrist straps or some other way. Need to find a "field quick" way of holding them together.

[@MillCreekWoodworking]

I also am very budget minded when it comes to hunting and shooting accessories for the reason that it allows me to spend a little more on the Firearms and bows. I had a plan in mind when on how to make my own, but thought I would check to see how others were doing it. You made yours pretty well EXACTLY how I had it in mind. No need to look any further. great video....and very nice looking rifle

[@mickychristian7366]

I think this is great information. It helps people like me who don't have the extra money for things like shooting sticks but I'll make a set just like this and I'll be proud of them. Same way when I plant my garden and harvest my own vegetables... Rock on man....

[@miltonaliff3316]

I modded an old wooden crutch last year, in a hurry, and thirty miles to town, but I like this better.

[@SClowcountryhunter]

Tried it out, went to lowes, 2 garden stakes, 1' of tubing, and I cotter pin pack. About 5$ and some change. Took 5 minutes to put together, holds the weight of my heavy Mosin Nagant perfectly fine and it is the right hight for a blind chair. Great vid! Gonna try it out this weekend.

[@Chickendoc]

GREAT presentation! I got the 6' sticks at Home Depot (marketed by Vigoro in the garden section) - light and strong! I got the carabiners at Harbor Freight - the foam tubes on them are longer than the ones on the carabiners at Walmart for the same price). I noticed you struggling a bit on taking that foam off - here's a tip for anyone trying this: they are essentially the same as early 80s GRAB-ON bicycle grips, and if you soak in a little soapy water before removing or installing they slide right off! I got those off the carabiners in about 5 seconds! Hope to finish today - thanks again for the great video DIY!!!!!

[@Fatyaqui]

Nice work man, I am going to need a set of those shooting sticks. Next time I go hunting with my new Remington 770. But first I need to go Bowhunting with my old Bear with that new Sling Wrist you showed me how to make. LOL!

[@Kelticgnome]

Impressive. Thanks for taking the time and effort to share your creation.

[@biffster73]

Gonna make mine a little shorter for a ground blind .Great video great presentation Rock on brother

[@cw300mag]

I love the design you have for this. I will be makeing me a set for use with my ground blind.

[@johnphelps223]

On a serious note, instead of wasting money on the carbineers solely for the foam look into some of the pipe insulation or some hardware stores have dense foam wraps for lawn mower handles. Then again once you use the foam from the beeners you can use them for hanging equipment and such.

[@JamesEiholzer]

Hey just was looking to make a set of my own bipod sticks. I used your Idea and then did an upgrade. Instead of a pin and the figure, eight rings used some very strong rubber band rings that are Castrating bands we use on the farm. Works great. just to let you know of the other options you can use. thanks for a great video and the help with my build. love these now and very cheap like you said to make and they are durable

[@jacobwyn]

you can get those grips off the carabiners easier by shooting compressed air underneath them, thats how we get bike handle grips on and off easier.

[@CamaroSSCommander]

Outstanding. On my way to Lowes right now. Thanks

[@fordtechchris]

Spray paint or camo wrap or camo duck tape would take them to the next level. Thanks, I will be making these in the near future.

[@JoshuaNeedham]

Wondered what the clear tube was for but it turned out to work great. I think I'd go with a shorter sticks for sitting position shooting. Thanks for a great DIY video.

[@CTKix]

Dunno how long the tubing would hold up in mixed temperature ranges and all, but..... You could use the same method of making a paracord bracelet and make a strap to go across the two. Added benefit - you'd have a few feet of paracord if you needed it. Now, I'm inspired to make some - thanx!

[@j0hnj0hn_83]

Good video. Planning on making my own sticks too

[@DieselRamcharger]

Golf Club shafts. The graphite ones, from Goodwill stores. Already have nice grips on them too :)

[@andrewsyndergaard8279]

+Diesel Ramcharger -- No disrespect, but did you actually use golf clubs, or are you just making stuff up? Wouldn't golf clubs be WAY too short???

[@DieselRamcharger]

andrew syndergaard Depends how long you want your shooting sticks. Wether you shoot sitting kneeling or standing. They have club shafts that are almost 6' long. But i digress. I shoot off hand.

[@lindaculley1094]

Great Video! 5 Stars. The foam is available as pipe insulation at most plumbing stores. Hope you got to use it on your hunt, thanks for sharing.

[@I_Am_Bone]

Excellent! I will be making some of these for sure!

[@cbizzkit]

Another thing you could do to join the sticks is to get tubing that will go over both of the sticks, and it works as good as the pin, and you wont take the chance of splitting the stick.

[@bunyuh]

Well done mate, I enjoy doing things like this, self gratification I guess. Made mine out of replacement fibreglass tent poles!

[@gsbacorn]

Nice video. I don't subscribe to many channels, but I did yours. I watched 3 posts of yours tonight, they were all common sense! Common Sense. That goes a long way! Thanks for the post, keep them up. I hope to put up my first video on youtube in the next 3-4 weeks about shooting ballistic glass. I have a friend that replaces auto glass and he gave me a windsheild out of an armored truck that he replaced. I am looking forward to it. Thanks again!

[@Wildirishmanbiker]

Nice and workable idea!!!! More money for me Irish Beer. Thanks for sharing my man

[@bowhunter4e]

@MrBob6939 nope....99 cents buy one get one at the local hardware store...you don't have to use those, you can use hockey stick tape too...whatever is your preference

[@ronloomis8245]

I will make a set but I have a question. Why do you have a bright reflective scope on a camouflage stock? It seems counter productive to me.

[@asaaqas]

great video, the bee part was the best

[@livewire322]

great video im going to make some for myself and use this as a guide.

[@uknighthuntingvision93]

For those with little cash a great idea and video. For me I'm lazy and got my Gen 3 shooting/camera stick (the only cusomization I have done is camo taped the bottom section of the three feet). That does me fine, for those who can't afford such a stick I will be sending them to your video!

[@undz22]

Just made one of these last night got the idea from your video! I didn't use any grips though and it ended up costing a total of $11... Thanks for the videos

[@zracing1272]

great video i used a bike inner tube to keep mine together

[@barrybisceglie7847]

Great video... going to make a pair or two...thx

[@Springr1911]

For the record I love your vid's. I sub'd a couple days ago and watched all of them back to back. I do have an archery question for you. I'm getting back into it and found what seems to be a good bow it's the Martin Jag take down. Is there a rest you'd recommend for a recurve that might let me use the FOB's? If not what's a decent rest for a setup like that? Thank you for any help you can give me, take care from Texas.

[@thegoods34]

i love the scheme on your rifle bro. i hope you bagged yogi and boo boo on your trip

[@2024JayZ]

Awesome job I'm gonna be making some tomorrow

[@skibum1610]

Great video!!! I am going to try and make my own this week! One thing I think I will do differently is put some electrical tape or a rubber cap on the bottoms of the polls to they are quieter and also won't sink into the ground as much. What size drill bit did you use?

[@huyked]

Love, love, love this. I've seen this video before, and glad I ran back into it, as now I have a use for a set. :D Sweet! Thanks for the vid, and all your DIY stuff. I love the ingenuity behind saving money. :D lol

[@IMKINDOFABIGDEAL13]

cool. good turn out. home depot carries small foam pipe insulation so you dont have to buy those large caribiners.

[@huyked]

Bee hunting with a stick. Is that a new sport I haven't heard of? :)

[@miketheknife2]

lmao big hunter runs from a bee, good vid good idea !!

[@Trashfished]

Awesome!! Good job.

[@bowhunter4e]

@shawnbebout so many different options...if you take a trip to a hardware store, you'll be filled with ideas. Most of my DIY stuff is just that...walkin around a sporting goods store and saying "i could totally make that"...the trick is figuring out how. Let me know how you end up.

[@bigred1mg1]

Interesting. Which part of that was the point?

[@SuperAbuYasmine]

Bees!!! I love it! Only human after all.

[@donaldlove3936]

Great job on the information! I love the cost most of all!

[@cw300mag]

Bees might be good for your hunting area. just think bees make honey and bears like it. I had a little bitty bee sting me in the side and it felt like somebody stabbed me an ice pick. When i was a kid i didnt remember them to hurt that bad. LOL

[@bowhunter4e]

@DagoBowHunter dude, that bee had a tattoo...i was sure as hell gonna try! lol

[@davidbogard4826]

I would use surgical tubing like on slingshots. The rubber grips the gun better.

[@bobgrams336]

I would not use the plastic tubing i would just rest on the foam

[@RayBlackburn]

Good Job and and pat on the back for being inventive as a way to save money I'm going to make one just like that one I was just in a gun store looking at those sticks and your right they are too expensive for what you get Blasted things look like 10 cents worth of materials they sell for $40

[@xx45acpxx]

Very ingenious!!!

[@AlanLynchefc]

great vid. Thanks. scared of a little bee and your going bear hunting.

[@vikiooo]

good job, i will make this for my airgun plinking games. thank you.

[@landonashby2029]

Awesome!! You could just lash the together as another option.

[@Catodonic]

Your ideas are good, but I wonder how noisy those sticks would prove to be as they rubbed together and rattled around when the hunter was hand-carrying them in the back country. I'd want to soundproof mine with a bit of pipe insulation. Also, I bet the price of those fancy carabiners sure drove the cost of your sticks well above the $4 you calculated.

[@BackyardAdventureKid]

Great video dude, im going out to make one for my pellet rifle

[@skibum1610]

Oh and I love the stock on the savage!

[@yungsmile7546]

I'm huntin' Bayer. Oh nooo, a 🐝 😆

[@stevenhouse9469]

tell where you got the produts to build it

[@bowhunter4e]

@nockbuster777 I really wanted to go with a bow, but i've never hunted bear before, I don't know how i'm going to react...it was a really hard decision to make, but i opted to go with my rifle the first time...it may sound like a cop-out, but i want to find out how i am going to act with a bear in front of me...next time will be with a bow though

[@quarterbid]

What size bit? Kotter pin ?

[@jor4288]

This guy is awesome.

[@pezza39817]

Exactly what I was looking for.

[@504money504]

Good job man.

[@ابوسعدالعجمي-ض8ض]

in my country $120 for shooting sticks. thank you so much .

[@yvantomac9502]

Next time you have foam handles to remove a lil wd40 between foam and whatever they are on they slide right off then wait bout 5 minutes and they are dry....:)

[@samengland5947]

put some water on your carabiners , the foam will slide very easy

[@dxjustindx1]

nice man i made the same sticks and killed a eight pointer this year

[@Jim-tz9lj]

how long is that introduction? 49 seconds?

[@dawsonfreibert8169]

I guess you never were too good at swinging things, swoosh swu, I lol'd.

[@kylehaslam2406]

hey haha I swair I just seen you in walmart today!?!?

[@vantage1200]

If I were bear hunting and using shooting stick.....make them out of wood. Those garden stakes are way to flimsy. I have some.....tossed them and used wood. You will be glad you did. Thanks for the vid.

[@conservativemacro80]

I was honestly just goign to save even more money and make my own stocks out of branches. just shave then down till there straight and look like sticks

[@SmokinFoolz]

10 minute video...2 minutes of useful content.

[@andypebs4989]

Ryan Aldrich I thought the vid was funny

[@iceblueni]

Nice video thanks

[@farfrumugen]

Not sure how they cost you $4. By the time you buy the carabieners the plastic tube and the metal rods you're closer to 15. If you already had that stuff then ok, but most people don't. Get a wooden dowel big enough for a walking stick, screw a "y" hook onto the top and you're done.

[@p2g1949]

ps the sticks were the same but they held them together with "O" rings. but to understand what Brit says because of his accent. good vid.

[@somethincreativ]

Nice word, bud!

[@CastleDocrine87]

"I don't like bee's, I don't like the sting" LMFAO!!!!!! What else would you not like bee's for? The buzz? That was a great laugh.

[@scotpearson293]

I watched your video because I need a shooting stick to shoot zombies and other things such as things that kill just to kill. any questions? and by the way, they do not make any golf clubs longer 48 inches or four feet which ever is longer as one of your fans commented. I do respect your right to hunt and would fight with you against anyone who tried to stop you. I just can't see killing for the sake of killing. thanks and I am your friend

[@bigD96000]

just use black electrick tape and a bike inner tube and the 2 stakes

[@dimibet]

whats your rifle?

[@MaxxHDROM]

nice tip. I bought a mono and think I will try this one as well.

[@stevekostecki1739]

love it 😎

[@donart8841]

That’s a Bee … and you’re going bear hunting …😂🤣😂

[@p2g1949]

saw similar vid on "Airgun TV". the sticks

[@danielwrighton1431]

Nice

[@JESSEPAVON]

Hey man great video. I would've just taped where you install those two pieces of black insulation with electrical tape and I would've probably use some type of rubber ban instead of a bolt. Thanks your video I'm not gonna buy any now I'm heading to My local hardware store. Thanks

[@Agri-WMH]

Stuff is so cheap in the US, same set of sticks with everything you brought would be at least £12-15

[@cbhunter52]

thanks a heap for the idea. I can throw the the dam pole i AM USING NOW AWAY. THANKS AGAIN

[@bowhunter4e]

@dxjustindx1 sweet man! nice job on both!

[@hmongwild]

Too loud too heavy on the hike. Try bamboo. Super light just as strong.

[@brettspolo]

tht pin in the uk we call a split pin lol

[@SnoboSnow]

I see White Out! :)