Thanks for sharing and confirming.... I'm about to replace/upgrade rotors and pads with Power Stop Z36s and I look your vacuum pump tool. I did get the one from Harbor Freight that's pneumatic, but yours proves less moving parts.. lol. Thank you Buddy, and I'm also in FL, but Central!
@midnightt69912 жыл бұрын
I’m from Michigan and I bought my truck in 2020. It’s a 2016 and was in Canada before I got it. Just checked my fluid the other day and it looks just like yours. Can’t believe it got that dirty and contaminated. Will be ordering that Motive bleeder soon.
@JoesGarageProductionsLLC2 жыл бұрын
Yeah that thing is awesome! It's almost time for me to do another brake fluid flush in my vehicles. Good luck with your project!
@midnightt69912 жыл бұрын
@@JoesGarageProductionsLLC do you remember what diameter hose you needed to go on the bleeder?
@JoesGarageProductionsLLC2 жыл бұрын
@@midnightt6991 oh boy... sorry I do not. I actually borrowed that hose from a mityvac kit that I have.
@midnightt69912 жыл бұрын
@@JoesGarageProductionsLLC no worries. I just got my pressure bleeder. Did you use the gasket that came with it? I can’t seem to get the cap on the reservoir with the gasket. Goes on fine without it. Also do you know what the extra cap is for, it doesn’t have a hole in it?
@joemartin7017 Жыл бұрын
Great vid thank you! P.S. you sound EXACTLY like Jason Sudeikis 😂
@karabinb4514 Жыл бұрын
Thanks very helpful
@richcruz89242 жыл бұрын
BTW.. Sorry, I forgot to mention Excellent content! You've gained a Subscriber! 2015 RAM 1500 SLT 3.6
@JoesGarageProductionsLLC2 жыл бұрын
Thanks! I appreciate the compliment and another subscriber :)
@jelsey.s3 жыл бұрын
Great video! Thanks.
@codycollier26622 жыл бұрын
Going to attempt this here soon, quick question. When refilling the power bleeder should I close all bleeder caps? When refilling is necessary does reliving pressure off the bleeder allow air in the system? If air does breach the system do I need to bleed each individual bleeder valve again?
@loluspololus3 жыл бұрын
👍🏻👍🏻
@davidknapp51633 жыл бұрын
Hugh help! Always looking to save $ when I can do myself. Thanks
@JoesGarageProductionsLLC3 жыл бұрын
Thanks - glad you found it helpful!
@droneranger20412 жыл бұрын
You briefly mentioned needing a code reader for the ABS system. Should that be addressed at the same time?
@Brandon-yj4pw2 жыл бұрын
Wondering that too
@isaiah_b_37983 жыл бұрын
Thank you for an excellent video. I'll order one of these units. I'm assuming they should work on a 2012 Ram 1500?
@JoesGarageProductionsLLC3 жыл бұрын
I can't say for sure.... I believe they advertised the adapter to work on most Chrysler vehicles. I can tell you it worked on my 2017 RAM and my wife's 2015 Grand Cherokee no issues
@chumbag Жыл бұрын
I can confirm it works for 2011 1500 u have to use one of the rubber adapters that comes with it for the early 4th gens
@Frankflexxxx3 жыл бұрын
How many liters did you y Use to complete the job?
@JoesGarageProductionsLLC3 жыл бұрын
I think I used almost 2 quarts of brake fluid. I went kinda nuts though :-)
@Frankflexxxx3 жыл бұрын
@@JoesGarageProductionsLLC... Thanks. 😁
@wurd23 Жыл бұрын
so if i need a scan tool for the abs, your method doesnt technically flush the whole system right? do i absolutely need to flush the abs or is just flushing it with the power bleeder enough? meaning what if i dont have a scan tool
@JoesGarageProductionsLLC Жыл бұрын
You should be fine using just the power bleeder. Actually just did that procedure again last weekend!
@sethberger2 жыл бұрын
Great video!! Do you know the part number on that motive bleeder? I want to order it but they’re customer service is horrible 😖
@JoesGarageProductionsLLC2 жыл бұрын
Thanks for the feedback! This is the bleeder that I used in this video: amzn.to/3K5tveR
@benjaminmorada19133 жыл бұрын
You're doing a four wheel drive?
@abdullahal-shimri30913 жыл бұрын
dealership charged me $160 for this
@JoesGarageProductionsLLC3 жыл бұрын
Yep, the tool pays for itself the first time you use it and it really doesn't take all that long.