Brand New Stand On Mower- with NEW Features Never seen before!

Cub Cadet is aggressively going into the Commercial mower field with a brand new Stand on mower. It has 3 features that I've never seen on any mower before. Let's take a look at this new mower!
More info on these mowers here:
Stand-On product line -
www.cubcadet.com/en_US/commer...
Product detail pages -
www.cubcadet.com/en_US/commer...
www.cubcadet.com/en_US/commer...
www.cubcadet.com/en_US/commer...
Heres the best prices on Some of my favorite Amazon tools:
Dewalt concrete saw: amzn.to/2FsxsNE
Fiskars axe: amzn.to/2DIsieP
Gear wrench Speaker: amzn.to/2Lbhl6l
Get 10% of Jobber software here: getjobber.com/im/dirt-monkey/
Makita Power shaft Multitool: amzn.to/2DroIowShock strap: amzn.to/2KoEAth
Milwaukee tools heated coat: amzn.to/2r164fr
10% off Kujo shoes here: www.kujoyardwear.com/?promo=10...
Diablo Metal cutting blade: amzn.to/2Kan8bE
ISO tunes
ISOtunesAudio.com?rfsn=1826204.613aa5
Milwaukee tools Air Compressor amzn.to/2EfYCoP
Winter equipment-Best cutting edge ever:
winterequipment.com/shop/contr...
Igloo trailmate: amzn.to/2UBVYPW
Ego snow blower: amzn.to/2C62ya4
Crescent wrench pass through socket set: amzn.to/2EjfLh8
Milwaukeetool packout: amzn.to/2EfXhy8
Striker trilight: amzn.to/2Pxehln
Bosch impact set: amzn.to/2LdNb28
3m work tunes: amzn.to/2Ee9t2w
Makita Chainsaw: amzn.to/2PyDEmU
Dewalt mitre saw: amzn.to/2QMndrU

[@kennethperian4370]

Great job showing and telling, love the cub cadet. That’s all I got to say have a great day see ya on the next video see ya bye.

[@FroudWorx]

I tested the stand on about 4 weeks ago here in Arkansas!! Great unit!! Cub truly has come to play .. They added nice features and durability .. I will be buying . Love the vids!! Keep’ em coming..

[@Dirtmonkey]

I will, thank you!!

[@stanleynowak9325]

Stan, Cub is going back to its reputation as thee best mower period. I have one, it's just awesome.

[@iceroad416]

best features i have seen yet. Love that cell phone holder

[@goldeagletactical9945]

My pro z 560s has been awesome. Holds hills amazingly well and the build quality is extremely stout, almost excessively overbuilt. Love it.

[@paulnicholson8524]

I forgot about them Thanks!

[@maxclement1502]

Great Video, I like that scrape plate on the side of the deck. Im constantly scratching my deck and re painting.

[@Dirtmonkey]

Thanks Max!

[@akbychoice]

Bearings do wear, just sayin. As long as it’s covered it’s good. I still prefer guessable fittings and bearings.

[@gordowg1wg145]

12:20 - exactly! No downtime, no lost clients, no missing pay-cheques! Maybe a couple of other suggestions for the manufacturer chap, lanyard, or something, used so the rear knobs aren't lost if they come loose - if you're riding you may not notice until too late... After the decals/stickers are applied to the top plate and before it is fitted, spray it with a clear coat to help protect the decals from wear and damage?

[@tedsheldon11]

just another great video. Thank you

[@Dirtmonkey]

I appreciate that Ted, thanks !

[@zachsharek3105]

I have two of the pro z 972 and I love them they can do anything you put in front of them

[@wh8085]

Just curious , what do you mow that works better with a 72" deck ? Football fields ?

[@zachsharek3105]

I use them to mow all my grass at my house I have 32 acres of hills and flats and fields

[@daviddesimone342]

I have The Wright Stander intensity 36” , for my rental property business , love it , easy to get into tight areas, picking up trash , Wright supposedly had the patent and made for other manufactures , I’m in Pa, near Lancaster county ( Amish ) mile from Sikorsky helicopters , hills are tricky but gets most areas

[@tbix1963]

Always good information

[@Dirtmonkey]

Thanks Tom, I appreciate that!

[@terryinozland]

I've still got the old get 2535 sitting in the yard. Shaft drive 60" deck. Blown the motor a few years ago . Hoping to get it up and running again that tractor was really amazing, comfortable, agile and pretty fast (well sorta) .

[@shannonmccall8701]

Cub all the way👍 built tough as nails in the 70s now a gain 2020

[@joeseiber5103]

That's a nice mower!

[@SpencerLawnCare]

Looks like a good machine Stanley👊🏻 Video was well done also.

[@Dirtmonkey]

Thank you !

[@nicksheehan.landscaping473]

Sweet gonna have to demo one next spring!!!

[@Dirtmonkey]

Cool Nick, for sure!

[@donaldmoore2749]

I have a Pro Z 154 and I love it.

[@derekrouth8378]

Just bought a Pro 900 L.CubCadet has moved light years ahead of what they used to be.The other manufacturers better watch it.Im a Toro guy.I have been since I got in this business,but I'm stunned at CubCadet.

[@StoneyRidgeFarmer]

Mowing season coming to an end!!! Wooooooo!!! We just picked up a Swisher here on the farm....hitting the camera next week! Great video Stan.....always enjoy your hands on videos buddy!

[@Dirtmonkey]

Thanks , can't believe it's that time of year again already!

[@prohibitionnights4202]

Love my Pro Z 960S. That thing is a tank.

[@theyoungs6111]

i just bought this mower i love it

[@Dirtmonkey]

How do you like it?

[@southernstripeslawnlandsca8256]

I’m so ready to see this at GIE

[@MrTemplefugate]

Nice, good quality review. I like your style.

[@adventuresinlawncare3734]

Awesome video, I’m sold.

[@richardspropertymaintenanc5807]

My first commercial mower was a 2008 cub cadet tank the thing was a tank. It went through belts like crazy had to triple cut alot of yards. It was still a good machine i heard the newer ones are pretty dam good. I would like to look into this stander. Thanks for the video

[@Dirtmonkey]

You're welcome, hope it helps you out!

[@wh8085]

Ive been looking at the commercial ZTR'sr , they are built like tanks ! One feature I really like on them that I did not see on the stander is on the ztr's they have a simple switch on the fender to release the hydros ! It is awesome and they should incorporate it into the standers as well.

[@professionalfirefighterlawn]

awesome, got that scag

[@raymondwanner2982]

Great video! I love my stand on's!! I have the Ferris, but would love to try the cub

[@Dirtmonkey]

Awesome Raymond, glad to hear it!

[@mattslandscaping4246]

The best thing about that machine is all the controls back further so they're not under the lovers and they have the fuel tank on the left hand side so you can fill up your truck in your equipment on the trailer

[@anythinguploads2161]

Never ever thought about buying a Cub Cadet. They look cheap. But this changed my mind. Love my Scags.

[@thomasmulvihill6959]

Wow A-Aron really gets around quick aha Brian’s Lawn Maintenance posted his video yesterday

[@joanferia]

Thomas Mulvihill for real i was just going to say that

[@Gamingbunny16]

I was think the same thing

[@user-cs3hi8zp7p]

Dadgum dadgum! That's what I call a high-performance man-toy! Great vid...very well done!

[@Dirtmonkey]

Hey thanks , glad you liked it!

[@deshawnsanderson7415]

Great video!

[@Dirtmonkey]

Thanks Deshawn, glad you liked it!

[@twosencefromcleveland6084]

Another great video, Stan. That's a nice mower there. A couple things though. Any mower in this price range should have fuel injection (choke means carbureted). I need to see cut quality. I'll be watching. Keep up the excellent work. Thanks!

[@Dirtmonkey]

Thank you and glad to have you here watching!

[@StreetsGTR]

@@Dirtmonkey twosence actually not true. My EFI Kohler engine on my Wright has a choke knob...

[@TheCamaro5]

@@StreetsGTR are suer it says efi. EFI doesnt need to choke as its computer controlled.

[@myke_bota7590]

Carbureted is by far more reliable. If a computer fails on an efi system, there goes your day. Just my experience .

[@johnmpifer]

@@StreetsGTRNot a choke. Manual enrichment knob. My Honda 919 bike that I had about 20 years ago had a manual enrichener.

[@markkoonce9493]

I got a chance to run one of the prototypes and it is a game changer I have always ran wright but as soon as they hit the market I'm purchasing a couple of them.

[@timlobstein911]

This so cool. Now seen yours and brain lawn maintenance video on it aswell.

[@Dirtmonkey]

Glad you like it Tim, thanks !

[@Pure_KodiakWILD_Power]

haven't tried them yet ( no dealers that i know of around here, though i _will_ be taking a field trip when i get some time ), but cub cadet's commercial build philosophy is the same as mine has always been: _overbuild it._ i think my next sitdown mower might be a cub, before scag 😂

[@Zraupp10]

Picked up a PRO X 636, eye balling a PRO X 660 EFI,

[@thewhiteknight02]

Smart features. Big nice tires. Wanna see-usb port to charge Bucket and picker holders Lights or light or switch options or flashing lights.

[@chronicmaryjane852]

Cub is killin it. I have proz560 it f-ing amazing cut is best out their and stripes from stock is amazing. Cub a force to be reckoned with. I’m buying one of these. I seen one of these at an expo while ago and I bugging my dealer in Canada and they didn’t know about this. Cub asked my deal how I knew about these..

[@ehood87]

Depends on the time of year. A sit down with a powered bagger is better for fall and spring and standers are better for the regular season.

[@Pure_KodiakWILD_Power]

liking that jeep 🤔🤔

[@thomasfreeman5524]

Looking to buy a new unit thanks for the run down this mower

[@bjgarbacz1]

It looks like wright... I mean I like the platform behind because then you can walk it under branches and such

[@jameyboyd8053]

I think I need to demo one of these

[@nathanbrodeur]

Stan I've run a sit on zero turn cub cadet mower before and it was a blast to run for someone that has lower back pain issues not having to have The Hunch Back Of Notra Dame back I'm 6 foot 1 inch and ducking under trees is a pain with a push mower sucks

[@Dirtmonkey]

That makes sense, thanks for viewing!

[@nathanbrodeur]

Stanley "Dirt Monkey" Genadek you are welcome Stan

[@turtleinwhalmart8114]

Can’t believe that’s a cub cadet. Wow just thought they were Walmart’s high grade Murry. But that thing look useable.

[@mr.cslawncare1347]

been looking at adding a 52" Deere but since i have a local Cadet dealer i need to check this unit out. Thank you

[@Dirtmonkey]

You're welcome, thanks for watching!

[@mrme5218]

A Deere stander is just a Wright stander in green

[@blairwise3339]

Nice looking machine. Seems like a pretty good value. Have you seen the new dawalt machines? What do you think of them?

[@logdon17]

Hey what is that guitar intro, love the sound of that

[@dannyadams1082]

How does the Cub Cadet compare to the Hustler mowers you are running this year. I really appreciate your videos.

[@gcbailey34]

So what about the cut quality? How's it do in damp/wet stuff?

[@00camaro00]

When I had my lawn care business I started with a 36 Wright stander....hated it!!!! Deck wasnt a true 36 was like 37.5 so forget getting in smaller fences. Wright used kinda narrow tires on the back so with me being over 6ft and 230lbs at the time after a cut or 2 it would start to leave wheel indents on the lawn. Traded it for a 36 bobcat hydro walkbehind. The 48 Wright was nice cause the balloon type turf tames so better foot print and no wheel indents. As for sit or stand...honestly I like them both, but I but my knees like the sitdown better. I'm in the process of moving down with Florida or Texas(still looking at properties)and restarting lawncare so think I'll give these Cubs a look.

[@garryweinert3103]

Can you demo the Spartan mowers. Standings and sit down models.

[@okcrc]

This looks like a well thought out machine. I personally have over 4000hrs on mowers. I've personally retired a Toro Grandstand @ 2000+hours and a ferris is2000 @ 2000+hours. With that said I will only purchase standers going forward. This mower is missing the most important thing IMHO and that is an operator controlled discharge chute. I've added them to every mower I've had since I first discovered them. It would just be nice to see a mower come with them from the factory. I replaced my Grandstand with a Wright Intensity and I really miss the ability to be able to walk behind it in certain areas like wet soft spots and such as I'm in the 6ft+ and 250lb+ category. I wish it had a way to temporarily bypass the safety switch in the platform so I can mow while walking behind it. Maybe we will these options in future generations of this mower since Cub Cadet seems to take user feedback from actual users. Overall though this looks like another solid option in the growing number of standers. It's my opinion that standers are the future for commercial cutters.

[@Dirtmonkey]

Those are great points. I didn't think about the ability to walk behind your mower- that would come in handy.

[@jtraveny]

i would love to run their sit down mower because i don't have any of those small tight spots, and i would love to use the steering wheel zero turns, whether it be the zforce model or the pro 960 i think it is, but either way, i love them

[@Dirtmonkey]

Thanks for the comments!

[@jamikal5]

I personally like my Throttle in frotn because I can still move and cut and not slow down my process using my thumb. In the back u have to adjust for sure if you're moving

[@michaelnussbaum6635]

Standing is the way to go. Looking forward to trying this mower out at the GIE

[@williambissell794]

I'm curious why you prefer standing to sitting?

[@michaelnussbaum6635]

I feel great after working all day on the standers. I worked at another company before and ran sit downs for a much shorter work day and felt tired. Plus we care the trimmers on the machines now and it is so fast to jump off and trim something and jump back on. But different strokes for different folks

[@revfred2008]

I hope they dont make these as industry standard because I love both. I wish I had one each. I'm 100% Cub Cadet.

[@popeye3305]

No grease fittings is a red flag to me. If you can't grease, you must replace. I'm 61 yrs old. When I was young Cub Cadet was a outstanding mower. They need to get back to what they were. Listening to the consumer is a great start.

[@robertpendzick9250]

Cleaning under the deck, sharping or replacing the blades, changing engine oil, fuel capacity, rear discharge and if needed clipping pick, roll over protection, operator fatigue, lighting, winter attachments, where do stand behind mowers gain ground against a sit down rider (especially a Walker) ?

[@otm646]

Totally apples and oranges use case. These stand on units are designed for the commercial outfit running 1000+ hours a year. In that commercial segment, these homeowner style features you're asking about are irrelevant.

[@ProCompSolutions]

Ferris z2/z3 stander is up there. I've tried many standers and ferris seems to be the best. I have not had the privlage to try a cub pro yet so that may change but from what I see they are very comparable

[@6bt_str864]

I agree, my cub dealer is 35 m away and Ferris is an HR. Waited for this xr stander to come out, what I like about the wright is if a side hydraulics goes south it's only one side, imay be mistaking but I believe these aren't unitized, and I do like the zt4400's (fron what I been studying.. I keep my mowers for way more hrs after warranty, WELL INTO me having to either wrench on it or pay someone to, THANK GOD Slow season upon us to get some leeway 😌

[@williambissell794]

How do you service the deck, and blades? Jack It up?

[@ltdlawnservice4586]

Ine thing I noticed was small gas tank but looks solid and well thought out

[@aarongriffith1321]

The fuel capacity is 7 gallons

[@truscapeart7642]

They blew me away. It takes a lot to turn a sour brand taste for me. In a couple hours of running the machines and talking to the reps my mindset took a 180. It went from my bottom of the barrel brand to the first thing to look at. It’s easily in my top three brands now. It’s the only stand on I’ve ever run that holds a hill like my Super Z. Cut is good, comfort is insane. Simple, tough, setup well, where do I stop. Industry leading with their first stand on!

[@Dirtmonkey]

Thanks for the comments and sharing your experience!

[@Jbus15]

I didnt realize how long this video has been out...i have a dealer that sells cub cadet and grtting curious in them now 😊

[@AH-up8zh]

First! Keep them coming Stan!

[@Dirtmonkey]

Will do Andrew, thanks for viewing !

[@mdb7228black]

You need to check out there walk behind blower. It’s very cool and has features no one else has.

[@Dirtmonkey]

Thanks for watching Mike!

[@gordowg1wg145]

The thing about warranties is they're only needed when the machine isn't designed, and built, properly - the manufacturer doesn't need to factor that, and related costs, into their pricing. Back in the bad old days, there was a lot of crap around and so warranty repairs were frequently needed - ALL those expenses would have been incorporated into the retail price the consumer paid. It's a version of 'do it right, do it once', for futher reading, you may want to check out chaps called Deming, Juran and Crosby, who revolutionised manufacturing back in the day. FWIW, they were basically ignored in the USoA but were embraced in Japan - that was why the Japanese cars and bikes were so reliable, especially compared to domestic, back in the sixties and seventies - still are, but rest of the world is catching up. They made a big impression on my during my student days, that still remains! Primer here - study.com/academy/lesson/deming-juran-crosby-contributors-to-tqm.html

[@patrickkeefe3679]

This thing looks pretty solid. For commercial it's great to have zero worries. Does this have the rear striping roller like the sit down mowers?

[@aarongriffith1321]

We didn't add the striping roller standard on this unit but you can add it as an accessory.

[@americantrucknation4891]

@@aarongriffith1321 sweet!! I’ll do that when I get mine

[@alexfreeman8989]

I love my Cub cadet tank 48. I would have bought another Cub cadet had they had a stand on mower when I purchased my Wright zk 52.

[@wh8085]

How do you like your 52" ZK ? I've been thinking of trying Wright next until I saw this video , Im gonna have to think about it now.

[@alexfreeman8989]

@@wh8085 I love it. I demoed the Ferris,Scag,and the Wright I and the Zk all at the same time. After having all at the same time on the same group of properties it allowed me to really do a good comparison. The ZK just the build quality alone stood head and tails above everything else. Bigger motor and 15 gallons of fuel helps also.

[@bigclawn7619]

I'm down in Florida would love to test one of those

[@6bt_str864]

Brevard county here/cocoa is my closest dealer 🤘

[@dmiles2869]

Did you ever get a chance to demo. I am curious about cut quality on St. Augustine at 4.25in as well as our Bahia.

[@bigclawn7619]

@@dmiles2869 no not yet

[@rellmonger7935]

Nice

[@Ringlawncare]

Pretty Cool! Watch out Toro...haha Get that plow on the front then we can talk...haha EDIT: MUSIC is a must!

[@ScoobyDrewski]

Have to listen to music when cutting, whipping, blowing, and smoking grass.

[@johnnyupchurch9020]

Pretty sure he said that for Cub Cadet liability purposes. But yeah. Lol

[@terryinozland]

Stanley this machine is impressive. I know it's a year ago now since you tested this. I'm about to drop the cash on a Grandstand 52". With the turboforce deck that is just tops. However the engine is Kawa fs 23hp not as nice as fx25.5hp. Now seeing this Cubby I'm stuck on which one to choose.

[@Zack-dk3pt]

usually you exaggerate things but for this there are actually things ive never seen ona stander before. only 8999!! im sold.

[@Zraupp10]

I really like Cub Cadet, wish they would come out with commercial electric mowers

[@charlienorton2337]

why?

[@Zraupp10]

@@charlienorton2337 them pro series are very nice

[@charlienorton2337]

Zraupp10 Yeah I agree that they’re nice but why electric?

[@Zraupp10]

@@charlienorton2337 running cost/ maintenance are very cheap Ego is coming out with one, can't wait

[@americantrucknation4891]

yes, I run some electric equipment though and it is absolutely crap. Yes it’s cheap but them batteries are expensive and don’t last very long. DO NOT GET ELECTRIC!!!

[@Hillsidelanscapemanagement]

The warranty is outstanding. I am one of the Florida guys that runs over 1000 hours a year on the machines. One concern. Twenty years ago cub cadet made an attempt at entering the commercial ztr market and had a fairly innovative machine. They left the market very soon after launching. Are they going to take the time to build their market share this time around? The warranty isn't any good if they leave the market after two years and lose dealers. How's their distribution set up so dealers get parts quickly? I own another stander made in a similar color that lost all dealer support in the immediate Tampa market because it took three weeks to get parts to dealers. I not have to drive to St Pete or plant City (an hour away in both cases) if I need repairs made. I truly hope they are in the commercial market for the long haul

[@Dirtmonkey]

Thanks for the comments and input Frank

[@ivanchitwood8800]

Bad boy runs the fx850v on there 54” stand on

[@martinphilips6091]

What model is this mower? Is it in production? What's the cost? Thank you!

[@jellyfan6889]

What do you think is better wright or the cub cadet

[@powerstroke8994]

I demo one of these. Very nice mower.

[@americantrucknation4891]

How do I demo? I want this mower but have never used one, if I could demo I would feel better about dropping $8k on one.

[@jonzimmerman6656]

you asked for our opinions, so here is mine. Game Changer is a strong evaluation by you. I doubt the Cub Cadet is a game changer. I agree some of those features are improvements over the competition....but mostly they are going to be incidental improvements. For me, the reason you buy a mower is for the deck. It's cut quality that reigns supreme for us. We run scag Vrides and even though they have their issues (lose bolts for one), they cut better than the competition...especially in wet grass (morning dew and rain). So before you announce that Cub is now the king in stand ons....lets see the cut quality. Good video stan.

[@Dirtmonkey]

Thanks Jon , I really appreciate the feedback!

[@6bt_str864]

(price $$ not "withstanding") Mine is dependability- ease/cost of maintenance all combined firstly.. Cut quality ("3rd"... Scag have a tri- stack plate design on their decks that here in FL rot to holy hell once you start not pressure washing in between those plates weekly under the deck, GREASING 14 zirk fittings and dealing with bringing grease In the house for dog to ingest after trying for 3 months to find a Chinese made grease gun that works longer than 3 tubes worth is in my "ease of maintenance" category as well.. DONE wirh greasing if you can't purchase a halfway decent gun to put the crap in with piss on it great post, sorry to ramble lol

[@HiveMind2024]

Lube shuttle grease gun

[@allenlong3939]

Stan I would like to ask a question? Side discharge or rear discharge better? I have only used side discharge mowers. I have always thought a rear discharge would be nice.

[@americantrucknation4891]

Side, rear is better distributed and won’t clump as easily but they don’t stripe well. Get the side, your clients will love you

[@RevsnRotaxes]

Could you review the cubcadet XT enduro Series

[@Dirtmonkey]

Thanks for the suggestion!

[@winningRus]

A great idea for the platform is add an anti-fatigue mat to stand on. My guys complain that their feet are sore/tired.

[@Dirtmonkey]

Good idea, thanks !

[@bkrgi]

Running Gravely Standers (2-60's and a 36) myself and Cub certainly looks to have a solid product...I would miss the super easy cut height adjustment, foot deck lift peddle, walk behind capacity(sometimes that is nice even just for a wee bit), integrated wheel motors(just less foo foo). Cub certainly upped the warranty game though. Not liking that oil filter access with all that suspension foo foo...eeek Having to remove stuff to get to stuff(operator pad & deck cover) Drop a Cub off at my local dealer, would love to see how it compares though.....

[@Dirtmonkey]

Thanks for the comments , I appreciate your input!

[@markbrisec3972]

Stan, you should put this guy and the the guy from Wright mowers in the same video and have them find faults in the other guy's mower..

[@DrivingWithJake]

At the end it didn't show me the suggested videos you pointed to :( Maybe I already watched them? :P

[@doc40mike]

why not have a rear discharge so you can get close to trees or whatever on both sides???

[@sparkymcspark8446]

Rear discharge mowers leave a line of ugly clipping behind.

[@richardspropertymaintenanc5807]

How did the mower do on Hills?

[@americantrucknation4891]

Standers are the bomb

[@jlustig83]

What will they come out with next? A steering wheel stand on!!!

[@dirtlord1147]

Looks like a great machine but some of the additions would become inconveniences like loosing the knobs but not compensate that it’s a great machine

[@6bt_str864]

Was thinking same thing, those will loosen constantly if you don't get medium strength locktite on them quick, and those rubber bunjy strap locks ALWAYS break.. bet you'd be running that thing without the deck cover within end of first summer

[@Dirtmonkey]

Thanks Cooper!

[@NHWilderness]

I wish this video popped up a month ago I bought a 2022 gravley prostance 60 I love it but this cub has better features and warranty I was in the market for a Scagg but couldn’t find one in the state of New Hampshire

[@seansullivan5245]

Love my stand on.. I bought a brand new V-Ride II last October and I absolutely love it.. But I've tested just about every standard out there and I have yet to find one that cut's and mulches as well as my Velocity plus deck. I have the 23.5 Kawasaki on mine and it's a 52". Cub has up their game but the fact there are no grease fittings and a small gas tank is a huge red flag for me. Every 2 weeks I grease my deck and what a difference it makes! I'd say to each their own in preference but I'm a standard guy from here on out. Even thinking of trading my 52" Cheetah in on another one and going strictly to all standards. Thanks for your input and video. Much appreciated.

[@Dirtmonkey]

You're welcome Sean, I appreciate the input!

[@TheBackRoads1]

When can I see one in store?

[@aarongriffith1321]

Our plans are to start shipping these units in Mid November to our dealers.

[@jimpikul8551]

Second! Brian’s lawn care posted this a while ago!

[@blanket8452]

If yesterday is “a while ago”, you’re correct.

[@jimpikul8551]

blanket8452 trying to not let him feel bad. Not that he wears a man bun.

[@Dirtmonkey]

Thanks for watching Jim!

[@jaysheldon6443]

Rather watch Stanley any day all day

[@terrydown5389]

Im terry from the uk i wish we had your type of machines over here with that same type of build they are amazing. I have worked for our local council grass cutting and there is nothing like that type of machinery the ones we have are slow and really hard to work on. The stand on one is the one i would go for the 3yr warranty is amazing. Bess wishs and god bless from Terry and family

[@Dirtmonkey]

Best wishes to you too Terry, thanks !!