Beginners Guide to Plasma Cutting and Plasma Gouging

Beginners Guide to Plasma Cutting and Plasma Gouging How To. Everything you need to know to start plasma cutting and plasma gouging. In this episode I demonstrate how a plasma cutter works, how to properly setup a plasma cutter, how to adjust for the correct air and amperage settings based on material thickness, how to make a freehand cut as well as make a cut using a guide. I demonstrate how consumables work and I also demonstrate plasma gouging and discuss the benefits and drawbacks of plasma cutting and gouging along with with air compressor size requirements.
Use coupon code BRANDONLUND at checkout and save 10% on your entire order.
yeswelder.com/?ref=BRANDONLUND
MORE WELDING AND FABRICATION VIDEOS HERE: • Welding Projects
LEARN HOW TO WELD VIDEOS HERE: • Stick Welding Cast Iro...
🔥 YesWelder yeswelder.com/?ref=BRANDONLUND
Use Coupon Code: yeswelder.com/discount/BRANDO...
⇨ SUBSCRIBE to Brandon Lund DIY Builds: / brandonlund
⇨ SUBSCRIBE to Brandon Lund DIY Builds: / brandonlund
CHECK OUT MY NEW CHANNEL :)
Moto-Vated 207 KZbin / @motovated207
Moto-Vated 207 Instagram / motovated207
Moto-Vated 207 Facebook / motovated
🔥 MORE WELDING AND FABRICATION VIDEOS HERE:
• Welding Projects
🔥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
• Learn to WELD- Beginne...
PLASMA CUTTER HERE: yeswelder.com/?ref=BRANDONLUND
Use Coupon Code: yeswelder.com/discount/BRANDO...
Save when you purchase Evolution Tools. Just use the exclusive links below to SAVE!
💲 EVOLUTION TOOLS - Use Promocode BLUND5 store.evolutionpowertools.com/
UK BUYERS can also use promocode BLUND5
💲 FRONIUS WELDERS - Save big when you purchase Fronius Welders using the exclusive links below.
Fronius Welder Buy online bit.ly/2X5Q4tF
Where to buy bit.ly/3dbVmt2
TransTig 210 bit.ly/2ZDxElI
Specs and features bit.ly/2ZDxElI
TransTig 170 product page bit.ly/2ZK9XIq
Free Fazor promo page bit.ly/3cckZsu
💲 EMPIRE ABRASIVES - Use Promo Code LUND and new customers get 10% off their order www.empireabrasives.com/
🔥 Links to some of the cool tools you see me using 🔥
Tinted Safety Glasses amzn.to/45NN3y7
Metal Thickness Gage amzn.to/32Dtn2O
Metal Marker: amzn.to/2MJzImj
Respirator (fits under my hood) amzn.to/2Hss3Vk
Drill America Drill Bits: amzn.to/2RjXk2i
Center Punch amzn.to/33994ua
Metal Scribe amzn.to/3idI4y6
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Irwin Chamfer Bits amzn.to/2Sa6Ft6
Amp Bluetooth Noise Canceling Hearing Protection amzn.to/34cZciv
Chipping Hammer (the best): amzn.to/2zs3Lqg
5/8" x 1" Shoulder Bolt (EBay)
12" F- Clamps (Harbor Freight)
Graff Black Diamond Cutting Disc amzn.to/2ELiSRU
APlus Lift Pneumatic Lift Table amzn.to/30cTaiu
Plasma Cutter (the blue one on the tool cart): amzn.to/2ZsuLQL
Welding Clamps amzn.to/33KyayS
Stick Welding Gloves: amzn.to/2L1fxOX
MIG Pliers: amzn.to/2MJ1jnQ
Welding Blanket amzn.to/31jUjo4
Transfer Punches amzn.to/32MmpH9
Portable Band Saw: amzn.to/2Hs8Mna
1/2" Impact tool: amzn.to/2X7oYC9
4 1/2" Grinder amzn.to/32HFhZe
MORE TOOLS & GEAR I USE
🔴 www.amazon.com/shop/brandonlund
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
FOLLOW ME (for behind the scenes stuff)!
⇨ Instagram: / lunddiybuilds
⇨ Facebook: / lunddiybuilds
⇨ Twitter: / lunddiybuilds
For Business Inquiries: [e-mail]
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!

[@BrandonLund]

MORE WELDING AND FABRICATION VIDEOS HERE:kzbin.info/aero/PLfbf78fMz9Vol0uX2-GNc6mLi75zpqb5f LEARN HOW TO WELD VIDEOS HERE:kzbin.info/www/bejne/d3XEYnxpZp56gJI

[@jalco2007]

Tnj H

[@brucepugsley8115]

Thanks for the yeswelder plasma cutter. As a result I ordered that same unit directly from Yeswelder as they had a promo code giving a 30% off an already lower price, plus free shipping. I am new to the metal works, having been an accomplished woodcrafter for over 30 years. Thought it time to do something I’ve always wanted to learn. Being 78 your never to,old to learn. Thanks again I am a huge fan of your channel. Signed The Old Student!

[@BrandonLund]

@Bruce Pugsley thanks for your support man I appreciate it! AWESEOME score on your plasma cutter! You are going to have a ton of fun! I'm 51 and I still learn new things every day. It would be boring if we didn't. I worked with wood for a liitle while and I have to say you are going to love the transition - Hardly no dust equals a clean workshop. If you make a mistake, just add metal. Much easier than wood in my opinion. Enjoy your new purchase and thanks again for your support! 🙏👍

[@michaelwillcutt2619]

A real auto plasma that has a built in air compressor an still portable is best for portable uses

[@rafaelfelix4227]

Evry day is somthin new and we keep lerning

[@KTannerPaisleyKK]

Be careful,Seen my elderly neighbor overestimated himself and get hurt. Reflexes and other factors fail suddenly

[@dkdogs]

Great video for a guy that’s getting a cutter and has zero experience. Thanks!

[@BrandonLund]

Thanks man!

[@thebeardedstork432]

Just watched this video again (maybe the fourth time?😳) It is such a good comprehensive video with all of the pertinent information you need. No annoying music is a huge bonus. Just clear concise info from a guy that cares! Bravo!

[@BrandonLund]

Wow, thank you! I appreciate that! It's always nice when I hit the mark. I had fun with this video :)

[@rockoyouthman]

I’ve never heard a better explanation on plasma. You’re a natural teacher. Thanks

[@BrandonLund]

You're very welcome! Thank you!

[@AXNJXN1]

Agreed... Vrey well done.

[@BrandonLund]

Thank you!

[@nathanmciver6496]

Yeah really easy to see! Good job!!!! You make people have somthing to keep going with! Best explanation I have heard!

[@BrandonLund]

Thank you Nathan i appreciate it! 👍

[@colinmartin2974]

Im a newbi here with my first plasma cutter, one comment when cutting out a shape or shortening a piece of metal, use the guide clamped to the part you want to keep. The guide will protect the piece from any wobbles like the demo cutting angle iron, the guide was on the wrong side and his vertical cut took out metal from where it was needed. 2nd tip. Want to cut a perfect round hole. Get a thick washer and center it over the place for the hole. Just weld it through the center to the base metal, then using the plasma cutter, go around the washer keeping gentle pressure against the washer and down on the job. The hole will be perfect if you keep the tip vertical. The washed dia plus the tip diameter equals the hole size. Its that simple.

[@robertknight4495]

I have never used a plasma cutter but by watching your instructional video I think it would be worth a try! Have used a oxy-acetylene torch and an air arc and now all I have to cut steel with is a cut-off disc (4.5")or a sawzall since I retired. Thank you for putting your videos on youtube for us to learn from!

[@BrandonLund]

Thanks! My pleasure!

[@susanthowe6112]

Fantastic vid. I knew nothing about plasma cutters, but I learned a ton by watching this. Well done.

[@BrandonLund]

Glad to hear it! Thank you!

[@adventures223]

This guy is a very good instructor explains everything in great detail the best video out there for plasma cutting for beginners thanks man you make the best videos

[@BrandonLund]

@you become what you think about Jay s you made my day! Thank you!

[@carlospena-cz6oe]

I agree, good lesson

[@MCHorner]

Love your videos. As a former teacher you do an excellent job addressing all learning styles. Students pursuing a vocational/trade school education would benefit from your experience and teaching ability. I recommend your videos to all students interested in welding.

[@BrandonLund]

@MCHorner Thank you very much!

[@user-ol5rj8qn9o]

Yeah, I'v ruined saw blades and drill bits when using bed frames for welding practice, now I use the plasma cutter and can use it to punch bolt holes or cut the frames. Thanks for your video it is a great one.

[@BrandonLund]

Same here. Your spot on about using the plasma to punch holes too

[@jgrenwod]

Plasma Cutter! Where have you been all my life? What a wonderful tool. The contortions I went thru to remove some metal are now a distant memory. Thanks for filling in the unknowns and teaching me some technique. Your video is great for rookies like me.

[@BrandonLund]

Fantastic! Thanks for watching!

[@r0ckworthy]

This is a VERY good educational video and a thorough introduction to plasma cutting. Best I've seen and I've been watching a lot of these over the last couple days. Thanks Brandon Lund!

[@BrandonLund]

Thank you so much! I appreciate that! @r0ckworthy

[@terrynewcom4749]

Great video tutorial. I just bought a Vevor Cut50P because I had a lot of 1/4" plate to cut for a project. My pancake compressor ran all the time so I added a 5-gal portable tank and now my compressor usually remains off until I'm finished with the cut. I really appreciate your table of amps, air and material thickness. Nothing like it in my owners so it's a big help.

[@BrandonLund]

Glad it was helpful! Great idea on adding that auxilary tank also!

[@dailygumbotv]

Thanks for these lessons, they are so informative. I'm about to buy my first plans cutter today. I would not feel prepared without your lessons. Thanks again.

[@BrandonLund]

@dailygumbotv congratulations and thank you for your kind words. PLUS i noticed that you are a recent suscriber so thank you for that 👍

[@BuhlzI]

Hands down the best instructional on using a Plasma Cutter. Thank you

[@BrandonLund]

Wow, thanks!

[@AZ-Z71]

Great video and information. Thank you for putting in the time to make this video and share your knowledge. 👍🏽

[@BrandonLund]

Thanks! I appreciate your support!

[@Bob-gn8ph]

What a great video❤ thank you so much❤ I'm an old man who has been welding since the 70s and I'm helping a neighbor with a fence project and they have a plasma cutter brand new in the box and I've never used one❤

[@BrandonLund]

That is awesome! I appreciate it man!. Thank you. Plasma cutters can be a HUGE timesaver and it's noce not to have to buy expensive gasses.

[@Bob-gn8ph]

@@BrandonLund ❤️John 3,16 ❤️

[@waynetiller7885]

One of best presentations I’ve ever watched, great job.

[@BrandonLund]

Wow, thank you!

[@rafaelfelix4227]

I am a welder and i love you videos the look very profetional

[@BrandonLund]

Thank you very much!🙏

[@JamesBiggar]

Got one a few months ago and glad I did. I used to go through so many cutting wheels. Bit of a learning curve to this like anything else, but it doesn't take long to get the hang of it.

[@BrandonLund]

Spot on and great comment!

[@versanil]

Thank you for making this very informative video. I can't wait to try these tips!

[@BrandonLund]

Glad it was helpful!

[@roy.h.barrett]

Watched this and your delivery and discount code sealed the deal.. I am now an owner of a plasma cutter... Excellent content Brandon! Thank you!

[@BrandonLund]

Awesome, thank you! Enjoy!

[@EsotericAwakenings]

Thank you for taking the time to clearly explain this process. It's so hard to find good videos on KZbin that actually give you some real knowledge. I really appreciate your video.

[@BrandonLund]

I appreciate that Thank you!

[@hugocortina3429]

Great video Brandon! To help with the consumable tip wear and easy straight lines I picked up a guide that slips over the gun tip and has 2 little wheels that lift the tip slightly away from the surface you’re cutting. Also comes with an attachable rod that you can cut perfect circles with. I am NOT in any way associated with this company but I purchased mine from Eastwood tools.

[@BrandonLund]

I've seen those Hugo but haven't had the chance to try. I have used the circle cutter guide which is pretty slick! Thanks for watching and commenting!

[@darkwinter6028]

Clamp your straight edge to your material; it’ll keep it from slipping, and you can use your free hand to help steady the torch.

[@BrandonLund]

Great tip :)

[@paulp96275]

Well explained Brandon it’s the best tool for cutting easy to use and store great vid 👍👨🏻‍🏭🇬🇧

[@BrandonLund]

Thanks 👍

[@MarkStadsklev]

I’ve watched maybe a dozen videos on this plasma cutter. Yours is much better than any other I’ve seen. Two thumbs up. So I’ve subscribed.

[@BrandonLund]

Thank you so much @Mark Stadsklev I appreciate the sub and your support!

[@EvrttGrn]

Awesome video. I use a lot of bedframes people are throwing out. Now I know why my portable bandsaw blades keep wearing out so fast. Thank you.

[@BrandonLund]

Anytime Everette! They can be hard on blades. I've gone through my fare share as well lol

[@salheredia5189]

You rock Dude! Your explanation/information is absolutely fantastic!!!!!Thank You.

[@BrandonLund]

Thanks man! I appreciate your support! 🙏👍

[@olddawgdreaming5715]

Thanks for sharing with us Brandon. I will stay with you on this channel. Good luck and stay safe on your new channel. Really enjoyed the tutorial on the plasma cutter. Fred.🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋

[@BrandonLund]

Thanks Fred I appreciate it! I figured by keeping this channel ONLY welding and metal fabrication that I'm giving the viewers what they came for :)

[@mariealice1969]

This video is the best tutorial I have ever seen 😍 Thanks for sharing your knowledge 🙏

[@BrandonLund]

Thank you @Mary Martin I appreciate it! 🙏👍

[@robertorzech8922]

Thank you for being so thorough !

[@BrandonLund]

You are so welcome!

[@richardabbs9670]

Great video & clearly explained, thank you! I'm new to plasma cutting & welding so I'm going to take on board your expert knowledge. Thanks again

[@BrandonLund]

Glad to help!

[@alanfisher5147]

Thanks Brandon, just got my Plasma unit into the shop and found your direction and explanations very helpful, much appreciated.

[@BrandonLund]

Glad to help Alan. Thanks for your support

[@EdgeofEternityBillCameron]

Thank you for sharing. I just ordered the same plasma cutter. Looking forward to working with it. Great video.

[@BrandonLund]

Thanks man and congratulations, you are going to love it!

[@Goldwing1500rider]

Thank you for sharing !! Many videos don’t show how start cutting ie touching or must have gap.. you explained it finally!! Thanks!! I just purchased one and it’s full 220 volts and does up 1/2 inch thickness. 45 years using oxy/avg torch. This is my first. 😁

[@BrandonLund]

You’re welcome 😊 Glad it was helpful!

[@vincentacunto6777]

Thank you for all your videos! I enjoy your attitude and motivational attributes!

[@BrandonLund]

Thanks Vencent! I really appreciate your comment! 🙏

[@joeybobbie1]

Great Video. It’s really appreciated. I just got a Amico CTS 180 and the settings guide you showed will really come in handy. Great instructions also. I will be checking out all your Videos. Thanks again👍

[@BrandonLund]

Thanks @joeybobbie1 that chart has saved my consumabels a lot! If you are into building stuff this is a popular playlist kzbin.info/www/bejne/boDOZ3-LeauKq5Y Thanks for watching and commenting!

[@victortaylor3933]

Thank you very much for a thorough instruction. I am completely new to metal working and this was incredibly helpful to me.

[@BrandonLund]

Glad it was helpful and I appreciate you watching! Holler if you have any questions

[@adrianhorsnell8900]

Thanks, a very good video with clear explanation and...best of all, you quickly get to the point.

[@BrandonLund]

Glad you liked it! Thank you!

[@tr_2sc1970]

Excellent, detailed, and informative explanation! Talented teacher!

[@BrandonLund]

Thank you! 😃 @khaledyousef6821

[@joeoleary3803]

Brilliant video. Best instructor on the web👍🏻🙏

[@BrandonLund]

Thanks Joe I appreciate it!

[@robertlaw8510]

Brandon, just a follow up on my plasma cutter. It was interesting. I have a CUT 50P that I got about three years ago. I took your ideas from you video and I found two problems. 1. The electrode was nice and tight but the electrode cover was a little loose. 2. Where the plasma cutter torch connects with the actual machine was quite loose. I tightened it up. After that, my plasma cutter works great. I haven't had any problems getting the plasma part starting up after the high frequency starts and I'm close enough to the material I'm cutting the plasma comes on and I'm cutting. So thank you very much. Watching you welding and plasma videos have been a great help in learning to fabricate metal.

[@BrandonLund]

Oh man thats awesome! Thanks for sharing! It can be super frustrating trying to figure out these issues! Right on man!

[@heinricheugenvonhelmbrecht6905]

Love this tutorial! Thank you!

[@Greenrida31]

It feels like I just learned everything I needed to know about Plasma Cutting. Great video!!! You have 1 new subscriber!

[@BrandonLund]

@Greenrida31 thanks man and I appreciate the sub!

[@DavidMiddleton]

Thanks! Bought s cheap plasma cutter off Amazon because I am drilling out some stainless metal boxes and was tired of burning out bits and how long it was taking. Getting the hang of it but the amp chart will be handy!

[@mmuller3233]

Excellent and informative, I learnt heaps.

[@BrandonLund]

Thanks! :)

[@bloop6812]

Brandon your a Fantastic teacher. Don't know your entire background wether you came from the welding industry or some type other Trade. Ever think about teaching youngsters in a vocational school setting or just a high school setting just to introduce the youngsters into the trades. After all some body has to build/ fix things that are broken. Know your so busy doing your Videos you probably not interested because you reach so may people this way. But the kids nowadays can't seem to get off the social aspects of their phone/lap top or other devices. Anyway your an asset to KZbin and to us guy's and girl's that want to learn new and useful stuff. Thanks alot have a great new year😊

[@BrandonLund]

I appreciate your comment very much. I started welding at a very young age. Taught by a pipe fitter and just ran with it. I've been welding non professionally for nearly 40 years and have been in construction for about the same duration

[@SWTWHITEGSR]

Bought few years back and regretted not having one sooner. Good video !

[@BrandonLund]

Right on and thanks! They are super handy!

[@nonemetalworks]

Greatest video i found regarding plasma cutter intro.... appreciate your work and knowledge keep it up

[@BrandonLund]

Thanks man I appreciate it! @Norman Aziz

[@billbertagnoli4226]

Great 😃 Very instructional and no bs. Thanks 👍

[@BrandonLund]

You're welcome!

[@mikesantimore6971]

Great video. You're a good teacher

[@BrandonLund]

I appreciate that!

[@reytiosejo3012]

Thanks for the clear explanation i learned a lot about plasma cutting.

[@BrandonLund]

Thanks Rey I'm glad I could help! I appreciate your support!

[@mayyouprosper8140]

Best video I've seen on plasma cutting.

[@BrandonLund]

WOW I appreciate that! Thank you! 🙏

[@dailygumbotv]

Great job explaining plasma cutting! Thanks.

[@BrandonLund]

Glad you enjoyed it! Thank you!

[@MinionsSmithy]

Great video, as always! I never considered being able to knock down welds. Very cool!

[@BrandonLund]

Thanks buddy!

[@MinionsSmithy]

@@BrandonLund No, thank you, Sir! Lol!!!

[@nicktaran4703]

Thank you! Very informative! I learned what I needed to know!

[@BrandonLund]

Thanks Nick!

[@shanewilson3980]

Thank you for your expertise and your concise tutorial, just what I needed to get started using my new plasma cutter..new follower right here !!!... .fingers crossed :)

[@BrandonLund]

Thanks Shane and have fun with your new tool! I appreciate the sub! Thank you!

[@johnmacmillan627]

Thanks Brandon, very helpful!

[@BrandonLund]

You bet!

[@dijimeistro]

Thank you for providing a plasma chart 🤗

[@MagaRickn]

Very good video! I just watched it for the 2nd time, after purchasing a plasma machine, and trying it out. Thanks!!

[@BrandonLund]

Thanks Rick and congratulations on your purchase!

[@marcmelissa8752]

very very good instruction Brandon Thank you!

[@BrandonLund]

Thanks man I appreciate it Marc!

[@diveruk54]

excellent training session, was going to buy one without fully understanding how to use it. this was a great session, will search further programs to help me develope my hobby

[@BrandonLund]

Thanks for your great comment @phil cordon I appreciate it!

[@magnusjonsson6720]

Thanks for this informative video. Finally i have the answers i was looking for. How to adjust the plasmacutter and how to actually cut with it. More precisely how to aim and if i am supposed to touch the material with the torch or let it hover above. (different types of torches) Great video and thanks again. 🙂

[@BrandonLund]

Thank you for your great comment! You are very welcome!

[@pierrelaurin3931]

Brandon you are an incredible teacher.

[@BrandonLund]

Thank you so much!

[@MrCarmelo1959]

Thank you for your great lesson dammit that was great I just bought one but I haven’t started cutting yet due to not having any experience nor knowledge on what to do but now thanks to watching your a great teacher kudos brother now I have the knowledge and confidence to begin I like and subscribe to your channel for more lessons thanks oh yeah I’m going to look up that chart thanks again

[@BrandonLund]

Awesome man and thank your for the sub! Have fun brother!

[@willyhaug549]

best learning video about plasma cutting I have seen and I have seen a lot

[@BrandonLund]

Thanks @Willy Haug I appreciate it! 🙏

[@pablocalderon950]

Thanks for the great tutorials really love them😊

[@BrandonLund]

You are so welcome!

[@user-zv3dn2dr2k]

You have explained so beautifully, so clearly and subtly even the smallest things so clearly, it is a great help to people like us. We kindly ask you to post a lot more videos like this. We extend our heartfelt congratulations to you for growing even more.

[@BrandonLund]

My pleasure 😊 That is so nice of you Thank you! @Tamil Birds

[@LostBoysRecovery]

Great video and explanation of everything i ordered one and now i feel better about how it works

[@BrandonLund]

Glad I could help. Enjoy!

[@danielchambers1958]

I have the PrimeWeld cut 50D...... your chart is awesome! Ty for the informative video......

[@BrandonLund]

Thanks Daniel I appreciate you watching and glad I could help!

[@MP-uc6zb]

I've never used welder or plus a cutter, this is a perfect video 👏🏻👍🏻 Than you! Subscribed

[@BrandonLund]

@M P Thanks for the sub! Much appreciated! 🙏

[@basilmiranda4617]

You are a very good instructor, great video

[@BrandonLund]

@basil miranda thank you very much!

[@noname-qx8en]

of all the videos i watched this one was much more detailed about plasma cutting and gouging. 30 minutes of beauty. i hope you have one for a ... lets say "a pick up car turned into a welding rig" tutorial or a "here's my welding rig setup" etc...

[@BrandonLund]

Thank you so much! I like the ideas you have also!

[@Ron-FabandBuild]

Thanks Brandon. Always great information

[@BrandonLund]

My pleasure!

[@lynnholland6551]

Appreciate your videos helped me quite a bit getting started keep it up looking forward to more

[@BrandonLund]

Glad to help🙏👍

[@JoeyGarcia]

Great video! I have a PrimeWeld Cut60 (great machine) and I'm new to plasma cutting. I have learned that I really suck at freehand cutting. I've been tempted to get a CNC table.

[@BrandonLund]

Thanks man! There is a small learning curve but keep at it. Freehand is hard for me too.

[@JoeyGarcia]

@@BrandonLund I try to use a straight edge as much as I can just like you showed. I'm going to get me a pair of tinted glasses like you mentioned.

[@blandon9748]

Thanks, Brandin, I learned some good tips!

[@BrandonLund]

Glad to hear it!

[@TomTom-tg2cb]

I had trouble seeing when arc welding so now I use a bright spot light aimed at my work piece and that’s helps a lot.

[@BrandonLund]

Great point!

[@chrisnedbalek2866]

Good vid, thanks!

[@CEng-ge6sw]

Many thanks. Just the tutorial that I needed.

[@BrandonLund]

You're welcome!

[@zn1zg]

Great clip. Thanks!

[@BrandonLund]

Thank you!

[@kbschulze]

Just getting ready to purchase a Hitbox Cut55 plasma cutter. Real good information thanks s bunch.

[@BrandonLund]

Thank you! @Schule's Guitar

[@MrCamerononicus]

Awesome! Very informative! Thanks you!

[@BrandonLund]

My pleasure!

[@kulotsgarage118]

Best tutorial!! Thank you sir!

[@BrandonLund]

Thank you! 😊👍

[@adamconroy2146]

Thank you so much from Down Under. You are a magic communicator.

[@BrandonLund]

Wow, thank you! I appreciate that!

[@CS-xo4kh]

Excellent illustration !!!!!

[@BrandonLund]

Thank you!

[@dav24x]

I get my plasma cutter after I watching your video finally no need to deal with eny gas very educative thanks 🙏 👍

[@BrandonLund]

Enjoy it It's a lot of fun and MUCH cheaper than buying gas!

[@darkwinter6028]

I find I must use welding gloves because the arc gives off a bunch of heat. My welding helmet goes down to a shade 5, so that’s what I use - which comes in real handy when it decides to shower me in molten steel. Also wear a full length leather apron so the steel doesn’t burn through my jeans.

[@BrandonLund]

Great point!

[@OldSneelock]

Nothing quite like finding your pant leg has burned up to the top of your boots. 😁😎

[@BrandonLund]

Exactly lol.

[@lucionkoinva5635]

Awesome! Still wrking on getting one..thanks

[@BrandonLund]

@Lucion Koinva that's awesome!

[@cirrusdesigngroup]

Thanks so much really helpful.

[@BrandonLund]

You're welcome!

[@rag5283]

very informative video... The one thing you left out was kerf angle

[@HugDeeznueces]

Great vid. Found the info about eye protection useful. New goggles ordered. Sub’d!!

[@BrandonLund]

Thanks for the sub! I appreciate it @Rob!

[@rosscowoodgreen6189]

great video, thank you.

[@BrandonLund]

Thank you!

[@user-ze9ku1wq1r]

Thanks

[@danbarosh2942]

Very great job and great info THx

[@BrandonLund]

Thanks Dan! 👍

[@1978garfield]

Yet another great video. I was worried you had stopped riding your motorcycle. Glad to see you are just specializing. I wasn't aware you could gouge with a "consumer level" plasma cutter. Hyperthem has a setup with special tips for gouging. Glad to see it can be done with a normal machine. I was looking at magnetic torch guides earlier today. They appear to be one of those things they charge more for just becase they can. $100 for 2 or 3 magnets and 18" of angle iron seems high to me. I think I will slap some magnets on a free after rebates Menards aluminum yard stick and try that out.

[@BrandonLund]

Thats an awesome idea!

[@randallquiring9525]

Great video, I always was curious about plasma cutters, having been raised with with a gas torch.

[@BrandonLund]

Thank you!

[@rafaelfelix4227]

Brandon thaks for the imput is good to know abaut new thing

[@BrandonLund]

Thanks man!