1970's Evinrude 6 HP; Various Repairs

[@goto8438]

Well that is opportune. A 1975 6hp evinrude. I am working on one at the moment. I really appreciate the videos you post. They have helped myself and others greatly. Good on you mate!

[@JamesW-qn6fv]

Thanks again. Love your approach to these videos. You don't talk down and you move the video along. Nobody wants to watch a dude screw in a dozen bolts for five minutes. Most of the time you just don't take things for granted. Many of us are learning (or relearning).

[@cwmaxfield2000]

I just picked one up this evening. Mint shape Just needs a good cleaning. I love the three blade prop. I need power, not speed. Great Video and very timely.. Clarifies any mysteries These engines were known for being exceptionally smokey.

[@josephm40]

Love to see you resurrect old outboards. I especially like it when you run into those unexpected issues and effectively problem solve.

[@BrandonsGarage]

Oh youll like the 9.5 Im working on now then, what a junker its turning out to be.

[@greatscott5054]

@@BrandonsGarage cant wait to see that video. i have two junk 9.5hp i will make into one soon.

[@andyjordan596]

Got one of these too! 1975 6hp bought for next to nothing. Needed some guidance so thanks Brandon.👍

[@mikedurhan9941]

This video is perfect timing for me. I just bought a pretty clean 1975 6hp OMC and I need to go through it in a way similar to what you just did - replace broken gear shift handle, redo the rewind, water pump, carb, etc. This is a great reference/check list for me. Fortunately, I found the correct version gear shift handle. Thanks, Brandon. Well done.

[@stefanchomiak1]

your video has inspired me to go through my 1973 six hp evinrude, which has been with me for many years. i can hear her troll drone clear as day in my sleep.

[@c_rock3512]

Let’s go!! Finally a video with this motor. I just picked one up last week.

[@samtate1260]

I bent that roll pin in the past I think it was 12 bucks for a new one thanks again for your time and videos

[@samtate1260]

When you put lower unit oil in I put a thumb full of vaseline in the hole take my time getting the screw and putting it on a tip I leaned from a pro like your self I have learned a lot from

[@alargedoug]

Thanks for the great video! I really like your videos and they’ve been very helpful for me thanks again

[@gregriley649]

Great video .thank you .you put alot of knowledge in this one 👍

[@marionblack8517]

Thank you so much. I have that exact outboard, all the information/instructions is perfect!

[@DavidHartigan]

Thanks for this video, I have recently inherited the exact same motor (6505R) and am diagnosing an issue with it bogging down at WOT, but will restart perfectly on the first pull and continue for another few minutes at WOT before doing the same thing. Works well at anything under WOT. Have rebuilt carb and replaced plugs so far. Am waiting for coils, cables and condensers to arrive so I can rule out that stuff. Mine also has the broken gear selector, snapped pretty much in the same place. I have drilled a small hole through it and attached a small piece of aluminum tubing to it via a makeshift "shear pin". Looks like the handle was made with chinesium or something.

[@leonardhirtle3645]

I have a 1969 6hp evinrude that was my dad’s. It’s in great shape. I also have a 1960 18hp evinrude, a 1991 20hp Merc and a 1954 3hp evinrude.

[@ddd3240]

Have an earlier version of this since 1968. Put thousands of hours on it as a kid. My family ate fish very consistently. It is still in use as a backup and we run it fairly often. Excellent little motors.

[@JRams88]

May i ask you if this motor has any anode? I bought a 1969 6hp buy i cant find any information about that

[@ddd3240]

Mine does not. Probably should say that if it ever did I know nothing about it.

[@DougsMessyGarage]

Great video Brandon but wow, it was an epic. Lots of fantastic information in there.

[@BrandonsGarage]

I prefer to think of this as a feature film, not so much a video.

[@philbarrows424]

That is one clean looking motor…

[@randyclary8144]

Really enjoy your videos I’m just now starting to have a boat And doing update on my motor . I’m a little bit leery of but I will watch you all the time you’re so good at what you do I wonder how many years it has Taking you to learn all the skills I thank you very much for your videos I hope you keep putting them up and I need them

[@WibbyKDX]

Saving this video for sure. I have a ‘67 that runs like a top It hadn’t ran in 15 years and I was able to get it running with just a few sprays of PB Blaster

[@lukeblanch4596]

Thank you very much that was helpful.❤

[@itsatrip779]

Thanks a lot! You save my boat's engine! 🎉

[@roycuster1462]

Some time ago I had a 8 horsepower on my 14 foot aluminum boat. I got a three bladed propeller and moved the fuel tank in front. When the trim two notches back it took 2 seconds to accelerate to the plane and the engine accelerated higher and my new gps showed my speed went from ten to fifteen knots. I snagged a fishing line and damaged the lower end and locked it up. I sure could of used your help fixing this? Great video.

[@-Viceroy-]

My all time favorite engine. I use one every summer. Never ever had any problems what so ever. I know these inside out, blindfolded.

[@BrandonsGarage]

same here! Ive worked on many 6 HP's I pieced one together using many different parts from many different year 6 HPs, one of the best running engines Ive ever owned. It was hit, fell off the boat, ran over, then dragged through a dirt field for a ways. It sat for a year or 2 like that, I pulled the powerhead and got all of the sand out of it, replaced the lower pan and prop, put it back together and it ran just as perfectly before it was crashed into.

[@stefanchomiak1]

@@BrandonsGarage i have had a 1973 6 hp for many many years now and logged countless trolling hours with her. its a tank, keeps going, asks for nothing except clean fuel

[@billrae4198]

Almost missed the most important tip in the whole video - Use 70's era correct expletives on a 70's motor -Far Out! Groovy! etc - Genius- Thanks so much!

[@DC_PRL]

These show up on FB mkt place in my area once in a while....people want tooo much for them ($200-$450). Don't realize it takes another $200 in parts to get them running. most require a total overhaul to get them going, yours was mint. Salt water use here. Got a british seagull to work on this winter, got it for $50 last year.

[@benkanobe7500]

Your engine/mechanical skills and knowledge show so strongly when you do the little things clear the threads with a tap and lube the roll pin. Only someone with tons of experience would know to do those things. Make it work for the next guy! Nice work. I am learning tons from this KZbin of yours!

[@glennmcleod4751]

The knowledge you have is astounding..I just picked up a 1978 6 HP for 50 dollars the guy found it in a storage unit he bought.. it's very clean wish I could send you pics ..upon looking at it the outer exhaust cover had a hole in center the inner exhaust shield seemed to have blowed out with enough pressure to hit it causing it to blow a hole..I took it off to inspect the pistons just knowing it had spattered one but no both pistons look great no scarring on them or rings ordered a set of inner and outer exhaust shield and cover for it gonna try to fix it what do you think could have caused it to happen.. there's no one around here in N.C that looks at these anymore..

[@skiphinson8620]

I’ve got a 1974 Johnson 6hp. It looks cosmetically neglected and been sitting for years. I’ve seen it run but it needs full service like you did in this one to be a really great runner. I hope I can get it going.

[@BrandonsGarage]

Just dig in buddy. You'll get there. Watch my other 5.5 & 6 HP videos for more tips.

[@donniefoster7713]

Man you’re sharp on those outboards good job I have a 74 Johnson 6 horse myself love that motor

[@thirstynardo4775]

Hey do i need to get a rebuild kit or something for the gaskets and hoses or what do you do? Just have em lyin around? The kit is about the same price as a good tune up.

[@nfgassmann8518]

Very thorough. My newly inherited 1970 Johnson 6hp needs a gear shift handle. I think I'll leave the vise grip. I guess I'm a chicken.

[@bennyblanko3]

I know you are mostly an old outboard guy, and usually the smaller units. But, I have an old 1975 Searay SRV175 and it has an omc "stringer" electric shift lower on it. Had it for over 20 years. Nobody makes excellent videos like yours on the internet. It would be super cool, if you got one, and went through the upper and lower on film. A couple videos out there on the impeller. But, most everything is old cameras, still photography, etc. That would be a great resource for us guys that have some wrench turning ability, but haven't gotten into them too much.

[@TheDtrolinder]

Love to see a video on setting up the timing with new points and condenser. And how to reset the timing on the flywheel. Thanks

[@edwardhill6945]

Look up T Mike from Louisiana videos,( or a couple of other videos) he has a very good one showing how to check the coils, & how to set the points. You don’t need that tool that Brandon used, just an ohmmeter. Place the flywheel on, but don’t tighten it down. Turn the flywheel by hand, as soon the ohmmeter shows the circuit broken, (points have opened), the mark on the flywheel should be right between the two marks in the timing plate. If not lift off the flywheel & adjust the points. Also, don’t remove the starter, as Brandon did to get the carb off. Only undo the top two bolts, the starter can then be swung outward enough to gain access to the carb bolt…that will save you a lot of unnecessary work.

[@outboardfixer]

That thingie on the shift rod must be a connector for a remote shifter I would think.

[@tyfab6288]

Amazing video! What is the pin for on top of the drive shaft?

[@Yamahaoutboardguy5090]

I have a 1974 Johnson 6 hp Super reliable.

[@waynewolfe8817]

Hi Brandon, I have a question, have you ever done a video on changing motors on a remote start boat, like a bass boat? I would like to keep the 9.9hp, for lakes with hp restrictions, but change it to a larger motor for larger lakes, or is it too much of a hassle. I have a hoist.

[@danielrobert7181]

Hey, I've got to get a 1969 Johnson 6 hp that has been sitting for years, running. I'd say your timing is pretty good !

[@king4brisbane]

I have a 1979 that when tested with Harbor Freight compression gauge reads 40psi for both cylinders. I tested it with both spark plugs out, full throttle, and used a rope on the flywheel. Its runs and idles great. Previous owner ran straight gas for undetermined amount of time. Could this be the cause of low compression? Maybe cheapy Harbor Freight gauge is faulty? New to outboards so thanks in advance for any advice.

[@af4od02]

I have the mid 1970’s Johnson 6 Hp version of this outboard. I am watching this video 2 years after you created it. Can you still get rebuild parts for these outboards now that Evinrude-Johnson have gone out of business? Thanks, excellent video.

[@BrandonsGarage]

They have gone under plenty of times, and yes parts are still readily available. But if you need points, buy them from Sierra, OEMs don't work anymore. However, OEM waterpump is the best. Don't buy the cheap ebay/Amazon ones.

[@SilviaElizarbe]

where are you getting your carburetor kits from

[@liammcneill843]

Just got one- seems to have a cooling issue. If I run it at full throttle for a good 30 seconds or so, it bogs and dies in a steamy hissing mess. After a few minutes of cooling off it will start back up. Runs fine at half to 3/4 throttle. Should I tear apart the cooling system and rebuild it?

[@TopBananaMan]

Awesome video. How did you end up adjusting the timing, Is this hard to do?

[@oldwhitecracker6342]

Awesome # 2

[@48shamrock]

Any tips for replacing the prop seal?

[@aannddrreeww1000]

Hey Brandon, how are you? Can I ask a question about a 1970s 6hp Johnson outboard? So, the new pull cord is installed. And I can start the engine; but as soon as I let my hand off the gas..it doesn’t idle. It just dies. Im thinking it might be the rich/lean adjustment knob. When I screw it in completely, the fuel/air mixture is too lean (I think) and it dies. When I unscrew the brass adjustment knob counterclockwise, I can keep it running so long as I keep my hand revving the engine. Any thoughts would be greatly appreciated!!

[@pacoweisz]

thanks

[@adventurefishingnorthernmi2015]

Great video! Thank you so much. What is the part number, and where I can purchase, one of those timing devices shown at the 1:11:23 mark?

[@edwardhill6945]

Don’t bother buying the tool. Look up T Mike (One outboard at a time), of a couple other videos. You just use an ohmmeter, turn the flywheel by hand, (you don’t bolt it down til your adjusted properly).

[@travisestes6217]

Any info on how to test timing without the tool? Cam orientation with respect to the lines?

[@benkanobe7500]

What was the sealant you are using in this video for the water pump wear plate? I tried listening several times and could not get the number (my computer is too old just like me!) When replacing the small waterlines, does fuel line of the correct size work?

[@deniseandmarkfirestine7443]

I’am glade I have the cdi ignition. On my Johnson 1977 6hp..

[@erichernandez3954]

When replacing the handle it comes with two washers i see you left the bigger washer to side and didnt see you install it,is it not needed?

[@garrettdannie]

I have a 1972 Evenrude 6hp 2 stroke motor that's running ruff, I rebuilt the carb changed the fuel, filter and gas can. It start and ideas fine but when I put it in gear and try to run it adjusting the throttle it gogges down and starts sputtering.

[@randy1ization]

would carbon build up be a concern if the compression is higher than normal?

[@huntershepherd3699]

Do you think if I were to do this to my 70 that it would stop having problems with not having water come out of what I call the “pisser”? I’m about ready to replace the water pump on it so while I’m doing that do you think that’s something I should do while I’m changing the pump? Also I live in Indiana and would what the guy was saying on above comments happen to my motor water would freeze?

[@JamesW-qn6fv]

Great videos. Thanks. I just inherited a 6R74 and am working my way through your videos. You don't mention the thermostat. Mine didn't have one in it's place. The parts chart shows one. Is it necessary?

[@BrandonsGarage]

Yeah, it's a good idea to have one in for optimal performance

[@aulioacosta]

Hey Brandon nice video very helpful i just did the carb kit and a bottom seal. My question is im converting a long shaft to a short shaft. Having problems findings a shorter drive shaft tjat looks like what i pulled out. What would u recommend doing. (1966 6hp Envirude)

[@michaelscottgriggs]

I have a short shaft and want a long shaft. Maybe we trade lol

[@aulioacosta]

@michaelscottgriggs If only u would got to me sooner. But I do still have all the parts to make it a long shaft. PM me we can talk.

[@philrogers1758]

What price for that shift clamp I should have heated, the not broken shift handle shaft rotates alright but doesn't pull out & doesn't have the extra indicator or adaptor that you pointed out ? what seller do you recommend ? I got a quote from cable boats US to Australia $35USD + $68USD post !!

[@alfajranmotorternate]

Ooouu good my enggine 👍🏿👍🏿

[@randy1ization]

did you remember to zip tie the fuel line on? also how do you time the motor without the special tool you have,., ? can you just go by the lobes on the shaft?

[@onemadmudder9686]

I recently bought a 14’ with the 6hp, 1973 Evinrude. Top & bottom compression is only at 60. Spark is there. Coils are not happy at all. Suggestions? I’m in 🇨🇦. Not sure if I can find an engine rebuild kit?

[@antonio.stefanelli]

Hi there, do you know the consumption per hour of this outboard? Thanks

[@stefanchomiak1]

yes i have on a 1973. i troll with it for days, 4 gallon tank. uses hardly any fuel.

[@TheDtrolinder]

I like the video. Do you know why these shift handles get broken ? I have a 77 6hp Johnson. Long shaft. My handle is still good. I replace the water pump.i removed the lower case where the transmission is. The shaft that changes gears looks to be a little bent. Do you think maybe this is why the handle is getting broke because the bent shaft is not letting it get changed from forward to reverse ?

[@edwardhill6945]

The handle gets broken two ways. Dumbasses try to force it into gear with the motor NOT running. If you need to do this, just pull the starter rope a bit. People lay the motor in the back of a truck during the drive to the lake- with it sitting in the shift handle.

[@brianwatson6911]

The new nice shift piece seems a little big

[@alano2875]

Just cleaned and set my points and got everything together after the water pump replacement. Out of curiosity... How much water should I see at startup? I see just a hint of water, then the thermostat opens up after a minute or two and there's a bit of a steam-bath that happens...plenty of water flow at that point.. Sound normal? Engine runs great in any case. Thanks for making this video.

[@BrandonsGarage]

Ehhh, not so much on these; at least in my experience, you don't see any difference in water flow once it's going. Sounds like the pump is just taking its sweet time. OEM pump kit? Or impeller only in origional housing? Sealant above and below the plate? Testing in large deep barrel capable or submerging above the pump?

[@RN67POST]

Well probably watched 4 hrs of your videos ! 😳 today ! I’m collecting old outboards to play with , love your videos and knowledge thankyou for sharing!! 2 Questions where do I get that pump tool for checking gear boxes , and curious what’s a fair price on these old motors ? I know you said you purchased this six hrs , I try to keep mine around 100.00 have several @ 75.00 . What are they worth in good running condition? Love your channel . I hooked!!!😬👍

[@BrandonsGarage]

I usually pay $100 for a non running motor less than 40 HP; usually a junky motor of higher HP can be had for $100-300. An older motor like this in good running condition will usually bring $300. Doesnt seem like much considering the cost to repair it? it isnt! This is a hobby, sometimes you can turn a profit flipping one, but the value is knowing you have a good running reliable motor when you're out on the water. Also, you can usually trade them for something; dirt bike, gokart, etc.

[@RN67POST]

Thanks , yea I’m having fun playing with these old 2 strokes! Amazed how good they where and are!!!😬👍

[@judechopper]

Mine has holes in flywheel too! They for bolts to remove flywheel without puller?

[@BrandonsGarage]

Nope - need puller.

[@gunfisher4661]

Got a question many of these motors came out with a 2 blade prop and many again with a 3 blade prop. I thought about it for a while and checked around a bit and it seems that the specs and engine parts are the same thru out the years so what is the thinking they had on the different props. I ended up upgrading mine to a 3 blade and the performance seems to be the same as before. So what are your thoughts on the matter?

[@edwardhill6945]

You don’t really get any more speed out of the three blade, but it comes out of the go,emquicker,

[@edwardhill6945]

Hole quicker

[@lenardhall9619]

Good to see a real mechanic.

[@marcus123841]

What cleaning solution do you use in your ultrasonic cleaner please I’m not having great success with my fluid

[@jamesjarrell7794]

Mineral spirits

[@curtknutson3936]

Do you do any work on Johnson from the 50 s

[@myermolaiev2620]

Please tell me. The same motor, the upper cylinder does not work, Spark does not always give a spark. I checked the wires, checked the reel, the carburetor, the fuel filter - everything is fine. I can't understand what the problem is.

[@BrandonsGarage]

Well it doesn't sound like you've checked the ignition system? Couls, points, wires, condenser?

[@k.whiking4372]

Normally the coil has burnt thru and is shorting out on the stator plate.

[@daniellewis1508]

Did a lot of these things, and my 1969 evinrude fisherman 6hp runs great. however, it wont pee. new water pump just like yours, but i didnt do the sealant below the plate. thinking thats my problem.

[@BrandonsGarage]

That would be my guess. If you try it, please report back your results.

[@SLOROB55]

Just got a 77. No body will work on it. I’m a little intimidated.

[@randymiller1604]

The only thing I can see that would stop this impeller from functioning is that the aluminum cover is worn out too much space between the blades in the cover. OMC definitely knows where to put sealant. They didn’t forget anything but you can put it wherever you want. Take note that the top of the Cover wears out and it just can’t work. You do good work but I can see you’re still learning about Johnson motors nobody knows everything.

[@alano2875]

Great video. I had a slightly stuck drive shaft. I was lucky enough and got it out by pulling the lower unit off center and giving the cord a slow tug...just on revolution and it came out.... lucky I guess (I noted the roll pin was slightly bent...but was able to straighten it out). My question: What is the function of the roll pin? Just curious... Thanks for the video. I'm fixing my 1977 6hp....

[@BrandonsGarage]

Puts pressure on the lower seal. Crankshaft seal cannot operate without it.

[@alano2875]

Hi again. I thought I had my waterpump job complete. All reassembled and pumping fine. Was going to go out so test fired....no water... Pulled thermostat...found bypass plugged and thermostat krusty...cleaned and re-installed thermostat cover...still no water... Not blocked...just not pumping. Pulled lower unit to find my roll pin mangled...one side bent over... I must have messed up installation. Question...would bent or damaged roll pin explain no water pumping? Could it ruin the impeller? I plan to carefully attach a drill to the shaft with some downward pressure... Wish me luck.

[@TheDtrolinder]

My water pump impeller is like yours. My impeller looks to be fine. My new kit is like your new kit. The new impeller is way smaller. I felt the new impeller wouldn't move enough water to the engine. So I opted to use my old. What's your opinion. Thanks

[@dmeads5663]

Where did you get that tool to pressure test the lower end?

[@edwardhill6945]

Just make one. A ballon pump, bit of hose, a couple clamps, a low pressure gauge, & a 3/8” coarse thread barb to screws into the oil fill or vent hole.

[@k.whiking4372]

We always used a stevens pressure tester.

[@andrewpowledge9716]

I got a 73 johnson 6 horse. Does throttle position matter when setting timing? Im new to this.

[@BrandonsGarage]

No, but it helps as it moves the plate where you want it to be. Like, you don't want the starter pinion in the way of your screwdriver.

[@andrewpowledge9716]

Thanks.

[@andrewpowledge9716]

Is it worth trying to convert a 1973 johnson 6hp long shaft to short shaft if I have a viable parts motor. The long shaft is pretty much all original nice with what appears to be 80 psi compression. Should I attempt this or just find a short shaft

[@jshall1000]

I never changed a impeller. Does it matter which way it gets put on or does it matter which way those tabs facing on it

[@k.whiking4372]

Yes

[@jshall1000]

@k.whiking4372 thanks. Would u know if this video would be good for a 18 elantra sel

[@benkanobe7500]

I have this motor on my first boat ever, a Catalina 22 sailboat: "1966 Evinrude Outboard 5 HP angler 5603". It looks very similar. I hope to do everything you just did here. Where did you get all the parts? Thank you!

[@BrandonsGarage]

Ebay or marineengine.com

[@pk710929]

I have one of these. Getting 75 psi compression on both cylinders. Is it worth the trouble?

[@BrandonsGarage]

75 is probably fine. I would say it worth it if you need a 6 HP outboard.

[@pk710929]

@@BrandonsGarage So far so good. Your video is invaluable for someone like me...know barely enough to be dangerous. QUESTION: I'm having trouble finding the powerhead gasket (0387321) for anything less than $60. That's a far cry from the $8.99 for two you mention in the video. Can you point me to your source? You said something about Sierra...

[@allenthomas8520]

What would you charge to work on a 6 horse Evinrude

[@user-dg5nj7zl2u]

I have a 1973 Evinrude 6 hp motor, it runs just fine. The only problem ,I have to squeeze the bulb on the fuel line about every minute or two or it will stall out. I checked the fuel filter and 42:08 it’s clean and I’m not sure what the problem could be? Any ideas ? I’m also looking for the gearshift handle if anyone happens to have one ?

[@BrandonsGarage]

Bad fuel pump or an air leak

[@user-dg5nj7zl2u]

@@BrandonsGarage Thank you so much, this outboard sat for 10 years, and it fired right up . Fortunate for me, the gentleman that sold it to me had the gas drained out and stored it in a dry area .

[@dannel6521]

anyone who can tell where the cooling water output is located on this motor?

[@BrandonsGarage]

Exhaust hole on the back of the engine

[@jshall1000]

Great video in going through this 1 little by little. I have a dumb ass question. On my 79 6 ho Evinrude are the hardware metric or American. Yes I'm new to this

[@edwardhill6945]

SAE bolts. Many of these were built in Peterborough, Ontario, but it was before Canada went to metric.

[@2759sausage]

Water pipe grommet?

[@pm270100]

at 23.52 where do i get that part ///how much are they

[@BrandonsGarage]

about $60 0395022 - Shift Rod Lever and Bushing

[@pm270100]

@@BrandonsGarage thanks well done

[@franklinross3560]

Where can I get parts for a decent price. I have an 81 7.5 hp I need to go thru but I dont have a lot of experience with boat motors and im have trouble finding parts. I let a friend of mine work on it and he said he got it running so I'd like to go thru it service it up real good and get it in good shape Where I don't have to worry if it'll leave me hanging somewhere.

[@BrandonsGarage]

Wellllll, you'll have to forgo the cost of parts at a decent price. Water pump, fuel pump, ignition parts, etc are all on the expensive side when compared to car parts from the same time. I have a 1980s 4HP and 6HP video that would suit your engine better. I also have a 7.5 I'll be diving into this summer.

[@blueback21]

wow that was fast! Ive got the same motor only problem is it bogs at more throttle , yet idles really good, any ideas what I should try?

[@-Viceroy-]

One small upgrade i would suggest when tinkering with these ones: Change the top bearing lubrication tube to a see through one. Kind of a "tell tale" if the top bearing is getting lubrication. (rarely it fails, but it won't hurt to know)

[@BrandonsGarage]

Ah, here is the issue with that- those clear tube only have about a year of life in them before they become brittle and start falling apart; even the 'fuel' clear tubing falls apart. Unless you get the Mil-spec acid line from McMaster, it all sucks.

[@-Viceroy-]

I have used clear pneumatic tubing. Kind of a semi-hard tubing. (meant for pneumatics low pressure hydraulics. slight milky tint on it). So far no problems in about 7 years. *ToppTube PA11P40 if i remember correctly.

[@scottdempsey3532]

I dont know about down the states but here in Canada,parts are getting so bloody expensive for those old motors that it's hardly worthwhile anymore

[@edwardhill6945]

Correct. That starter spring is now $150 CDN tax in.

[@k.whiking4372]

Same in Australia and very very hard to get.

[@judechopper]

Won't need any crazy sealants! Haha then says need some sealant

[@judechopper]

RTV is crazy sealant!

[@judechopper]

Johnson and Evinrude sealing compound is crazy! You said no crazy sealants

[@k.whiking4372]

@@judechopper Adheasive M is what is used.

[@donniefoster7713]

Just took my out on the water fishing it ran great but just has no power? 14ft boat just one person I was expecting more it would not get on plain like it’s running half throttle but I’m wide open? I guess I’ll start tinkering with it and see what’s up

[@peterjensen6844]

I'm shocked its two cylinders for 6hp.

[@karostaro4779]

why is that roll pin on the drive shaft even there? wish i would’ve watched this video first. i finally figured it out but dang!

[@outboardfixer]

It's there for the spring to but up against to hold the seal up to the motor.

[@karostaro4779]

@@outboardfixer what a pita to figure that one out

[@edwardhill6945]

The pin drives the cup seal, otherwise it would not turn. Also keeps those 6 upper parts in place

[@jamesjarrell7794]

How do you know a piston is bad

[@surferscollective613]

So not possible to change the water pump without removing the power head?

[@BrandonsGarage]

On a 6 HP, you absolutely can.

[@edwardhill6945]

Absolutely. I think Brandon may have removed the powerhead for other reasons. He should have mentioned it wasn’t necessary. Just rotate the flywheel slowly by hand as you are dropping the lower end. When the pin lines up, it will come right down.

[@outplayinghooky8515]

I am in need of the prop, anyone that could help

[@jessieleonard8398]

How much would you charge to fix a 1971 Johnson evinrude 6 hp

[@BrandonsGarage]

Where are you located?

[@jessieleonard8398]

@@BrandonsGarage I’m in resaca ga