Installation of the EGR-Valve V10-63-0083

[@Grahams-Grass]

Why they have to make them so complicated to do when they know they gonna get blocked and fail anchors

[@propanbutan4634]

dealers live on ripping off customers

[@myleswaller]

Dont bother trying to clean it if youve got more than 100,000 miles . Itsnot a job you want to do twice. I done them before moving the dpf as far back as possble remember to remove temp sensor ( over £100 for a new one ) remove drive shaft . Turbo oil feed + return pipes and you should be able to slide it out

[@Adamlener]

Hallo ! Wie lange Zeit war das ? Also ungefähr wie viel stunde ? Grüß!

[@brandVEMO]

Hallo Adam Lener, bei uns lässt sich das Zeitfenster etwas schwer einschätzen, da wir den Vorgang ja auch mit der Kamera begleitet haben. Als groben Richtwert sollte man sich je nach Leichtgängigkeit der Schrauben und verfügbarem Werkzeug etwa 3-4 Stunden einplanen. Viele Grüße, Team VEMO

[@danielshaw6089]

I do these with out taking off any parts other than loosening off the DPF, best time in just under 2 hours, no need to strip down the vehicle to that extent!!!!

[@azherali305]

Daniel Shaw Hi daniel were are you located my caddy egr is same problem

[@danielshaw6089]

Azher Ali Hi we’re in Leeds LS21

[@danielshaw6089]

Otley West Yorkshire

[@ally11488]

Daniel Shaw - You a contortionist? Mate's an experienced diesel mechanic and it took him around 9 hours. You should post a video.

[@danielshaw6089]

Lol next time we have one in il do a video 😆

[@retomoto5060]

how many hours change this egr

[@timokeefe8418]

great video

[@richardbukowski5633]

Do you need to re program the valve or should it self learn?

[@brandVEMO]

Hello Richard Bukowski, You need to adapt the EGR to the vehicle with the diagnostic tester. This process needs to be done, to ensure that the new EGR will be controlled properly by the control unit. A lot of testers have a specific program that you can run, to clear this step. Regards, Team VEMO

[@Dallas-GTR-86]

Hi is it worth replacing and how many more miles should it last mine is a vw Passat 2011 2.0 Tdi and has failed at 130k is that normal? Also is it worth deleting with pipes some 1 Quoted £450 should I go for that the part it’s self is £387 from dealers can someone help thanks 🙏

[@owenrodwell1643]

About 6/7 hours labour if you’ve never done one before. Not a job for the faint hearted ! Just done my sisters Audi a1 1.6 CR

[@ally11488]

Owen Rodwell - You did well to do it in that time. Mate of mine did the honours and it was a pure bastard taking around 9 hours. What a crazy place to put something that normally fails every 40,000 miles.

[@owenrodwell1643]

Lex772 I only dropped the subframe 2 inches. Was enough to get dpf out. A lot take it out completely. Probably saved an hours labour not taking it out tbf

[@kas5857]

Owen just wondering I can get your details as I have to do this job and would like more info. Thanks

[@owenrodwell1643]

kas m yeah what you need ?

[@kas5857]

Owen Rodwell could you explain the process please? How did you drop the subframe ? Just loosen the bolts? Did your old egr cooler show signs that it was leaking ? What part did you replace it with new or used and new gaskets ?

[@ddrmasnik741]

Hi. What does it mean "Teach-in the EGR valve to the controller"?

[@wayne251975]

Ddr Mašnik it means to use VCDS to adat the new part through adaptation. basically teaching the new parameters of the new part to the ECM.

[@Chicanolocos]

How much will it cost???!!! It's tu much work

[@narindermaan1967]

How much to do this job labour

[@brandVEMO]

Hello narinder maan, what do you mean exactly? How much time do you need to install a new EGR-Valve? How much money you need to spend to let someone else fix the cars EGR-Valve? Best regards, Team VEMO

[@kevjdm1986]

If anybody asks you to change one on a Audi TT say no

[@simonedwards3571]

Love doing these drop subframe 15 mins then you have so much more room

[@brandVEMO]

Hello Simon Edwards, we appreciate the positive feedback. Best Regards, Team VEMO

[@koggism]

Very shit design by vw/Audi, esp for a part highly likely to fail.

[@gilbertmuirhead9035]

Strewth what a faff

[@propanbutan4634]

on my astra mk4 1.6 petrol it was a 1 minute job lol

[@brandVEMO]

Hello Propan Butan, it is nice that it went so much faster with your car. The work on VW Golf is unfortunately much more time consuming. Best regards, Team VEMO

[@wayne251975]

I think they are confused. this is the cooler not the egr valve

[@leopardrules]

I think you are confused... The valve is attached to the cooler, and it's pretty difficult to separate them without taking the whole assembly off the vehicle first.

[@koggism]

Does the cooler and egr attached to it need to be replaced at the same time?

[@rnewton9502]

This isn’t the EGR.

[@koggism]

So all the auto parts shops are selling them has egr. wow people being miss sold car parts.

[@jawidakbary1411]

this is EGR valve, i think u have not seen it before.

[@ricardolourenco2814]

This is the EGR with a coller incorporated. There are other models that have EGR without it and the location is different.