Building My BRAND NEW BIKE!

[@mambocowboy]

Sunday has the best paint jobs on their frames. Quality.

[@thescenesnotdead]

I've never been more hyped to watch someone else build a bike😅🔥🔥

[@Gixxer515]

Glad you found that damn chain! Bikes freaking sweet!

[@jessarellanes6648]

Yes,I enjoyed it very much. Best video on bike build. Keep up the good work.

[@thomasmiller7531]

love this channel man. Watch your videos every evening to wind down after work.

[@Brant_Moore]

Thank you so much, that’s awesome to hear!!

[@SFletcherson]

isn't the bolt for the post suppose to be screwed in from the post end and up into the seat?

[@jda79]

Hell yeah! Looks badass

[@christiantabangay3202]

Finally i get to see the build. Today is the day

[@Vexorgthedestroyer]

Sweet bike Brant, dude, I have to say something. Every video I see some guys are putting on grips in weird and wonderful ways, literally all I do is fit the tip of the grip on the bars, and with the palm of my hand over the end of the grip I just tap it on. 2-3 taps usually does it. The trick is to tap over the hole at the end of the grip so that the air pocket lifts the grip, basically what the compressor does but without the hassle.

[@Brant_Moore]

You must have gotten just the right grips or very lucky every time. haha Every time I do that I can only get it so far onto the bar before having to do something else.

[@kirkwickham3336]

That new build feeling! No grease on your brake mounts, Brant? Curious to know what it weighs, too. Looking forward to seeing your shred on it!

[@SlimDonni]

Congratulations bro. Nothing beats building up s new bike. Peace out

[@BFELLY]

I was gonna say you forgot the bottom bracket spacer!! Haha been waiting for this build

[@jopac75]

The bike looks great! I would love to have seen a front brake on that beauty

[@jamesmatthew899]

tf

[@Brant_Moore]

Stay tuned😉😉

[@alistairbuckle3450]

If you’re going Odyssey, the F25 (slightly steeper angle than the R32) forks are amazing! Changing direction feels telepathic. I’m running front brake cable through gyro, down fork, zip tied to side as it goes back up to Ody Evo II brake, Potts mod style. Your Soundwave frame looks fresh! Looking forwards to a bike check in the future.

[@dillonbrooks7756]

Awesome video! I've got a soundwave in the same colour, it's an eye catcher for sure. Keep up the great work!!

[@jdm91hatch]

Nice bike man on your next bike I think those cranks will be going on with those bar ends

[@gibsonfbird2012]

This was awesome to watch! Thank you!

[@Brant_Moore]

Thank YOU for watching it man! Come shred soon

[@jamesmatthew899]

hey man just keep working hard good things to come with your work ethic

[@Brant_Moore]

I’ll do my best man!! And I appreciate that!

[@COBALT_iLLADELPH]

Anytime you have metal on metal alittle grease couldn't hurt

[@djndcpl]

Looks perfect. Wish You lots of bangers on this beauty :)

[@kevinbmx9826]

Such a sick frame 🔥🔥🔥

[@rich9192]

Sweet looking ride 🤘🏻you’re going to love the RNC cranks 👍🏻

[@firedemon2166]

Those are the exact pegs I wanted on my dream bike

[@adyzanahmad8565]

I'm a Malaysian and I'm easy understand on every bites of ur speech... I'm in learn to buying a new bike for beginner and ur video help me so much... Tq...

[@Brant_Moore]

So awesome to hear!!!

[@adyzanahmad8565]

@@Brant_Moore so sad when to buy bmx from US in Malaysia because of tax and big money to spend on shipping... For Sunday blueprint it cost about 6++ US dollar to buy from Malaysian seller... It's about double price isn't?

[@dennisd4452]

Congrats on a very custom bmx bike build. Can't wait to see the many many videos ahead. When are you going to ride and talk to Montana again? I miss the long conversations on Sundays. P.S. Thank your girlfriend on video too. I'm sure she would love that. Ride hard. Push your limits. Above all wear a helmet. Peace to everyone.

[@Brant_Moore]

Thanks man!! Ricky and I will do a live here soon. We talked the other night and both want to do it just has to happen. You’re definitely right on thanking her. I really should more often! Thanks man!!

[@aslams5250]

Damn that is so clean and dialed 💥🔥🔥

[@matthewcaltuna3162]

It looks sooo good!! 🤤😍

[@thepawll]

Nicely done👍🏼

[@Flp_bmx]

Awesome dude!!! 🤘🔥

[@Twisted_Billets]

Digging the new bike👌

[@so-b-itcustoms908]

Just seen your short clip of this frame, gee wiz that color is nice

[@kevlar8340]

WOOhoo!

[@benreading3332]

Sweet sweet bike 👌. I’m gonna double check my fork/headset as although integrated race I’m sure it was rocking without the crown race installed! Need to strip and re-check

[@Brant_Moore]

Thanks man! You definitely don’t want that crown race in there if one is built into your fork

[@pirate_duck4985]

Turned out F'n Superb! You owe my wife an apology though XD Our 10 Month Old Son Leo spent the entire video climbing over her to get to me & watch the video! He does NOT wanna sleep right now, but your Bike Check got him to sit still for more than a few seconds each time he made it to me hahaha.

[@Brant_Moore]

Hahaha that is so awesome! I’m sorry Jon’s wife!!

[@jrome03650]

I’m building a brand new bike this weekend. ❤️

[@JustVictor72]

my dream bike

[@gonzaley999]

You should have put some loctite seal on the those crank arm bolts theyll get loose for about the first 2 - 3 weeks if you dont

[@Chief1987]

Dope looking bike mate

[@dethgripco]

First thought of him showing the BB is that brant's gonna forget about the spacer. Yep.

[@dethgripco]

It appears that you have installed the bb spacer off cam though.

[@LoneWolfed]

I saw that. I was like wth? Also when he first put his front wheel on the fork. His wheel was backwards, cause hub guard was on the left.🧐

[@joeboxer6950]

I have never laughed so hard at the electrical tape. $420.00 for the frame and skimping on the rim strip.

[@Brant_Moore]

Just for you bb!

[@albertaguilar681]

Nice!! how much cost to build a bike like yours? I'm thinking of getting a pink Sunday frame.

[@zahirosman1990]

that look good but what are you doing with the other frame or bike

[@adamroocroft9413]

Wanna put a little bit of anti seaze on those pedals since you have titanium cranks so they might cold weld 🤷‍♂️

[@Brant_Moore]

Good call!!

[@speedmeade1]

TI PREP! ON THOSE CRANKS

[@Brant_Moore]

But the guy at RNC told me grease was okay too

[@llIlll]

Nice build also I have a question I have a tight spot on my chain I gets really tight to pedal

[@Brant_Moore]

Pretty normal to have a tight spot. If it’s too bad check your sprocket and driver for wear

[@llIlll]

@@Brant_Moore I just got the sprocket maybe it gets really tight in one spot maybe it’s installed wrong ?

[@Brant_Moore]

It’s possible. Move your wheel forward so you can pop the chain off and spin your cranks without the chain on it. You’ll be able to see if it’s not perfectly round or bent

[@llIlll]

@@Brant_Moore I’ll do that and let you know

[@joaomaria5319]

i love how the front wheel looks bent as f*** because of the camera xD

[@badfourlife]

I just remember left side of crank has left hand threads.... ive got about 3 broken 15mm wrenches before that stuck with me lol

[@LoneWolfed]

I cut my seat bolt off flush so it didn't stick out. Seat doesn't budge.

[@ryanjohnson191]

You are welcome 🙏

[@Kristianbmx]

I need them park tools

[@Cra1g1380y]

Got a link for those pegs? Wanna check them out.

[@seanstepherson6138]

The time is now!

[@seanstepherson6138]

Came out beautiful! Can't wait for the riding video now. I will be waiting for tomorrow.

[@davidlindberg8863]

Missed a bunch of points of contact to apply grease too

[@Spicy_Conspiracy]

Bars are over kill and so is that titanic sized seatpost

[@Brant_Moore]

Shit! I forgot I was building it for you! Ill get them changed out ASAP!!!!!!

[@eddiestone7610]

Old video to comment I know lol. Not 100% sure but aren’t you supposed to have a stealth pivotal seat with that post? I’ve never had one myself, just regular pivotal seats but that bike is sick bro. I love that toothpaste color. I used to work for Seattle Bike Supply in Reynoldsburg, Ohio and they were the first distributors to get Sunday frames and parts back in 2006 I think it was. We had the original wave frames in that color, also forks and bars I believe. So that color takes me back to those days. Later years like 2011 or something I think is when they started just shipping from their own warehouse. I could be wrong but SBS didn’t carry their stuff anymore which was sad bc I never got a chance to get one of their frames. So when the opportunity came up last year, probably around the time you made this video, I got me a Nightshift frame and dang do I love it! I almost got the Soundwave one but I got a little better deal on this so I pulled the trigger even though it’s the 21” TT and I wanted 20.75”. Still wicked awesome and wasn’t difficult to get used to.

[@Booyuaaka]

I just built a new Sunday street sweeper frame black tho

[@LoneWolfed]

Does Park Tool make individual Allen keys? Trying to turn brake mount screws with that multi key set is a pain. A separate 5mm would be so much easier. Love this bike by the way. Saw the sneak peek yesterday on Ricky's live Instagram.🏅🔥👍

[@aaronashcraft5052]

Yes park tool sells individual Allen keys of many sizes

[@fransschreuders8488]

Instead of buying the $80 Park Tool BB press you can buy a 22mm bolt and nut at the hardware store for $4.

[@shanedm3396]

But Park Tool wants you to buy their tool

[@darricks6969]

Why didn't you grease the spindle ? And is there a difference between left and right side for spindle

[@Brant_Moore]

I literally greased it twice and made it a point to say something about it the second time........haha

[@hagzroalac]

Im sorry im new here. May i know what cranks are those. Ps. Amazing bike.

[@thomas930409]

*Electrical Tape instead of using Rim Tape gang!*

[@randall3786]

How long do you think your Axels will stay straight

[@Brant_Moore]

Well the one in my BSD revolution is still straight so I think it’ll be alright

[@randall3786]

Ok thanks

[@SuperImmunologist]

What’s that bb tool called? I have a pedal tool that’s similar.

[@duanstapelberg4152]

The springs on the u- brake is wrong way around

[@teddyr7901]

😃👍

[@Brant_Moore]

Thank you!

[@teddyr7901]

@@Brant_Moore I don't know how I missed this video I'm not working right now I'm recovering from my other surgery on my left leg this time

[@Brant_Moore]

Ah man well I hope that recovery goes smoothly!!

[@teddyr7901]

@@Brant_Moore it is it's the same mirror damage from the arthritis

[@kimoarmstrong3519]

When and why did Sunday eliminate the integrated seat post clamp?

[@Brant_Moore]

If you break or anything happens to it you have to cut the frame. That’s my guess

[@dmoney285]

Dude needs a socket wrench

[@karl11]

May we know the weight of your bike?

[@stevenrader1308]

My frame is usa 🇺🇸

[@shanedm3396]

Your girlfriend’s hair matches that billiard green Sunday frame

[@kevinbmxrvc99]

No tennis ball i. Fornt wheel

[@chessmaster3297]

How do you build a beautiful bike like that and not ride as soon as its done. I just dont get that as a fellow bmx rider.

[@Brant_Moore]

We were riding in our main line at the time I finished the bike and there was absolutely no way I was gonna ride in a line at the trails with a new bike knowing I’d probably have to bail at some point. I also wanted the first trick on it to be an ice pick. Kinda just knew I’d have to wait so it was a little easier

[@Brant_Moore]

I also had to look at the parts every single day for months waiting on everything to come in to build it. Haha It’s normally sooo hard not to just build and ride it!

[@Ndh994]

Are you okay? You made this bike build so much harder than it needed to be. You said "you wanna grease anything metal on metal" yet missed loads🙄 i feel sorry for your bb going in crooked too!

[@Grenade825]

Sunday is way behind in modern bmx technology

[@Brant_Moore]

Uhhhh wut?! Hahaha