Brass Plating at Home - Easy Metal Finishing - Brass Brushing - Brass Coating

This is a 'How to' video on producing a decorative Brass Plate finish to metal objects at home.
For this video, we coated a steel door sign in brass, which only took around 10 minutes.
The part or object you are heating up will get very hot, so make sure that you are wearing heat proof PPE as well as keeping any flammables away from the area you are working in.

[@bhamgreeneyes]

I had no idea it was so simple. Thank you for doing this video!

[@dragan3290]

I swear this is the best and easiest method. Funny enough I stumbled on brass plating my tools. I was soaking in vinegar bath for 2 days and after all black gunk was gone, I hit with a brass wire 9n the drill and it came up with a brass finish! Cheers

[@HORSEDICKoMPEG]

How durable was it tho?

[@dragan3290]

@@HORSEDICKoMPEG my linesman pliers are still good since I posted this comment.

[@florascent9ts]

Same! I was restoring an old gouge and noticed it turned yellow 😅 that was without heat though

[@RockeyDAproductions]

that was suprisingly simple

[@tonyb1968]

This is not brass plating. This is a nice job of giving a brass appearance.

[@GarageKnight]

I did this on one of my helmets. But this is a really good tutorial, short and to the point, well done

[@Jaze2022]

How did it go with the helmet? I'm thinking about refinishing a thin round plated item but worried about the heat warping it

[@colleenhurley7507]

Thank you SO MUCH for posting this! Super Helpful !!!!!!

[@gerard518]

Very nice technique. Bravo!

[@Thanson199415]

After all that, are you able to polish it to a mirror finish?

[@zatrusofnietzche2281]

Seriously impressive and far too simple 👍

[@abruptlyblunt]

don't use a brass brush with a plastic handle, it will melt and fall apart quickly but wood handled brass brushes are getting hard to find....

[@proprocrastinator5349]

Amazing! Thank you for sharing!

[@TheHallbjorn]

Does it patina like pure brass does? Or do these brushes use some impure brass alloy? Never seen the bristles on these brass brushes tarnish.

[@grngocolombiano]

Cool technique, thank you for sharing!

[@frhnfthee]

hello, can this method apply on silver ring?

[@ruizjoel94]

Will this work on aluminum?

[@revolverdon]

Nice, how long will the finish last ?

[@TheSateef]

would this work on aluminum?

[@lastmanstanding1767]

Can it be polished

[@RestorationAustralia]

Super cool and simple, I have to try this.😊😊😊

[@clickandedit8040]

hey bro nice tut i ❤️it . but how last will it? and do you u know how to antitrust black coat on knife with d.c supply?🙏

[@dragan3290]

I soaked my rusty tools in vinegar bath for 2 days and after all black gunk was cleaned off with a cloth, I hit with a brass wire brush on my dremel. No heat and bright shiny finish. Just keep wiping clean vinegar and you will see how golden it comes up. I did 2 sets of electricians pliers and jewlers vise! The more black gunk you get off with vinegar and rags the better it comes up! Also dip the bristles from the brass wire brush in vinegar. When finished I dipped in soda bicarbonate and rinsed with distilled water. Even tap water is ok. The pliers I put a clear coat of enamel and bake with a heat gun a little. The jewellery vise? I sprayed with a lubricant/ rust preventative. Wd40 or INOX MX3 brand is the best I found! Good luck and take care!🙂👍👍👍

[@ednahairston5728]

Sooo helpful.

[@bicivelo]

Very clever!!

[@williamworth2746]

Will this work on old GE fan blades ?

[@scottkeeler2306]

I think I missed the plating part?

[@itexpert752]

Oh. Nice dear

[@Itschristycasey]

I’m trying to do this with galvanized sheet metal and it’s not working at all. It seems like the steel sheet is plating the brush instead of the other way around. :( Is there something else I can try?

[@evergreenforgeworks9491]

Don't get galvanized steel really hot! It gives off toxic fumes that are really dangerous. You can get sheet metal that isn't galvanized and you'll probably get the results you're looking for and you won't risk exposing yourself to toxic metal poisoning

[@victorhugocastro7126]

Is it easy to remove the brass coating?? Wanna do in one of my chisels but I'm afraid it'll lose the coat if I clean it

[@albvscommesincastello6346]

be careful since while heating the chissel you can easilly heat threat it and it will lose its hardness.

[@troytaylor1913]

I bet it would stick on better if you gave it a coat of borax paste flux and bring it up to bubbling temps. It would be stuck on permanent almost like brazing.

[@troytaylor1913]

Borax is a ant and roach killer I just add a little water and use it for a paste flux for silver soldering. It's cheap and the same thing as something labled paste flux online. I use it for electroplating.

[@abubakarshaikh7531]

Can you please make video on plastic plating (gold)of 6mm size Please its a request 😊

[@eBikeSales]

Hi Abubakar, I have a video planned on plastic using conductive paint which you may find useful.

[@abubakarshaikh7531]

@@eBikeSalesis there any way to contact you??

[@thrashsuxballs]

A couple of questions! Does this work on aluminum? Does this work on metals comprised of various alloys? Also, once the finish is achieved…is it necessary to spray it with a clear coat?

[@slipperycman8555]

People asking if this will work on aluminum 😂

[@eponymousIme]

You lost me at having a steel wheel to clean the piece.

[@fcharlesd8468]

Not really brass plating, is it? You've cleaned up a part that was solid brass, yes?

[@GamerBuilder1337]

It is plating, the brass is transferred from the bristles to the part, because of the heat.

[@shearperformance]

I swear he’s just brushing off an oxidized piece of brass