Torsion Gun Holster - What You May Not Know

[@joztunes69]

I just bought the 3.0 torsion IWB holster and reversed the belt clips and it works, so it's more of a IWB but if you remount the belt clips properly, you can also OWB the holster, I bought the 2 pack two for one from your website and love these holsters

[@TLFIN]

I own only Bravo Concealment holsters...too many to count. We need the claw/wing. I'm a skinny fat guy with a belly. So the claw/wing will help for appendix carry for us. I can't wait until the release...I'll be buying more holsters from Bravo Concealment.

[@neanders2]

I agree, the wing is needed, not enough concealment without.

[@jeffhurley756]

Single clip is brilliant. I just added it to my 3.0 holder with a Glock 19 MOS with RMR. Cant it forward, it just disappears under my clothing and is very comfortable. This is my favorite IWB solution. Love the Torsion screw, perfect configuration for what I need.

[@Renaldo135]

I have two holsters I automatically buy when I get a new gun now adays. The Vedder Lighttuck and the Bravo Concealment Torsion or OWB holster. Love them both. Both Companies are excellent and Bravo is the best on fast shipping. They also FINALLY GOT HOLSTERS FOR MY BELOVED CZ MODELS. FINALLY. Also I just noticed this video was made 2 years ago. They now make the wing/claw at Bravo concealment and its ten bucks extra. I suggest you get it. It makes all the difference in the world and with the torsion holster makes it even better.

[@ducktapepilot]

I have the Torsion for my Glock 26 and I really like it. I have had it for a few years and it's super comfortable. I wear mine in about the 2:30 position.

[@bwall615]

Literally just ordered 2 Bravo Concealment holsters. Cannot wait to get them. I’m old fashioned and have worn leather for my whole adult life. These will be my first “Modern” holsters. Now, I’m counting down the days.

[@Bravoconcealment]

Thanks Brett 🙏🏼

[@a.d.c7941]

How have you liked it????

[@bwall615]

@@a.d.c7941 I have bought more since for all of my EDC guns. I love them.

[@a.d.c7941]

@@bwall615 Thank u bro!!

[@jamesdelong6401]

So far in the time I've had both the strong side and appendix holsters. They been good. Now I have another's that I've bought from teir 1 and Alien gear. All three companies serve their purpose for what I need. My favorite thing tho I like the BEST out of bravo concealment holsters is the NICE FIRM ' CLICK ' and the retention on bravo concealment

[@troykaufman5262]

I have appendix carried my sig p365 in the linked torsion gun/mag holster almost every day since it has arrived. It completely disappears, and I love having the extra mag. I honestly would even argue that it is more comfortable in the linked configuration because of how it distributes the weight.

[@Bravoconcealment]

Thanks and yes, I agree.

[@jamesdelong6401]

Yes. 💯. I tried the one belt clip method when I got my 1st tension 3.0 holster for my shadow systems MR920L. O yea! 👌. It's nice to be able to move around your pistol to suit how ether you sit down or what style shirt or button up you are wearing. Cause some times you shirt well look ok, when your holster up ' standing straight up. But, when you move that look different. It's AMAZING, how just a 🤏 of adjustment by running the one clip can do to conceal the frame of the pistol. Especially if someone is running a EDC style magwell. I had to do some fine tuning after installing a Floyd's EDC magwell on my Smith&Wesson M&P9 2.0 4.25 metal.

[@santiespinosaa]

Bravo torsion + G19X son mi EDC, La mejor holster que probé para 24/7 💪💪💪💪

[@applejuice-4706]

Ordered one today!

[@jasonstocks6460]

I've bought holsters one after the other. One of my first holsters was the early version of the Torsion. Didn't really appreciate it for some reason. Picked it up one day and decided to start using it. The best comfort cp,m[ared to anything i've tried. Many holster manufacturers out there has one thing on common; following others. The Torsion is unique in design and does just what it is intended to do. Imagine I can properly conceal a G17 appendix car with this thing. Love it! One thing I can tell you is that the claw will not do the Torsion justice. As a matter of fact, the Torsion design does the same or better than the claw without the bulk. I tried a claw and tool it back off. Was a waste. Pushed in one end, but pushed out the other end. The Torsion is well designed and curved with the body. No need to add anything. My two cents.

[@mattygunn3852]

Just ordered the 2 for 1 OWB + torsion for $52.00! First BC holsters. Can't wait to get them! If I like them as much as I believe I will, more will quickly be ordered!

[@Bravoconcealment]

Thanks Matty! 🙏🏼

[@a.d.c7941]

How have you liked them?

[@gdaniels3376]

Good day Sir. I understand that you are not making a Bravo appendix tortion gun holster for Walther P99 AS. I'm based in Cape Town South Africa

[@gdaniels3376]

I really love the Bravo product and need one for my firearm with retention screw

[@cferguson76]

3.0 left hand. Let’s go!

[@jrod3151]

Love the holster. Have one for Glock19 Gen5MOS & the Glock43XMOS. But can u please make one for the p320XCompact rxp

[@briansek1847]

I know you’re very busy but would love to see Bob on his walk and the podcast

[@snailsfrogslegs119]

Yes.. they do make a good holster, both IWB and OWB. I like the older molded Kydex, but these new polymers are good too.

[@hez9028]

Nice holsters. I have the 3.0 for my 19 gen 5. Please make one for the 43X MOS with rail.

[@Bravoconcealment]

Thanks! On it! SH hould be available soon!

[@arthurwilliams3165]

I use this for my Glock 17 appendix carry for 2 years now. Comfortable!

[@Bravoconcealment]

🙌🏼👍🏼

[@gilkman]

What brand sweater are you wearing in this video? Thanks

[@dustypot]

I absolutely love mine. I run a single clip with my m&p shield. I actually started carrying my p365 on my ankle as my back up because of this holster until I pick up a iwb for it. It's so much not comfortable than my tauga.

[@reneaguirre6774]

Thanks

[@raymondcutaran5083]

i do hope you lessen shipping time.. it says 6-14 working days. excited to get mine here in the philippines..

[@Bravoconcealment]

👍🏼🙏🏼

[@janvodros8238]

Perfect video !

[@Hebrews10_26]

Will the shield plus work in the shield?

[@chriskyle6891]

Shady salesman and I already bought and like this product

[@lifewithjlu]

😭😭😭

[@EnjoyTheDash24]

you need to do this with the OWB holster as well

[@EnjoyTheDash24]

That is, have the gun handle turn in.

[@aadilismail2888]

When are making for cz p07 and Shipping to South Africa

[@RemingtinArms]

You know something I definitely don't know about the tortion 3.0... do you guys make them for lefties?

[@Bravoconcealment]

Not yet. We are working on them.

[@jeremyarmstrong8486]

Any reports of these scuffing/scraping and Glock 17? Very interested! Thanks!

[@Bravoconcealment]

You'll always get "wear" marks on your gun just by wearing it. As far as scuffs and scrapes, our Torsion gun holster is pretty good at keeping your gun safe.

[@lestergoff1135]

Got the Torsion holster bogo. Love the owb holster. This iwb...not so much. Was looking for a tuckable hokster to wear with business clothes. The only way to do that is run one belt clip. Moves around too much, and pokes. I'm constantly readjusting the holster. Its just not that comfortable. Sorry. Been wearing for a couple months now and just not happy with the iwb. Still trying different positions.

[@kevinorr6880]

More concerned with the corner on the side of the clip. Would love to not get a hotspot there. I'm a bit on the thin side so maybe a rounding process will soften this corner?

[@Bravoconcealment]

Sure, you are more than welcome to take a Dremel and do what is necessary. It will not void warranty.

[@azureenterprises4070]

@@Bravoconcealment wow, now that I know this I will definitely buy a holster from you guys. I’ve bought holsters from other brands but didn’t like that I couldn’t cut or dremel it to my liking without voiding the warranty

[@jayyoo866]

Do you have the holster for Glock 17 gen 4 with Olight PL-Mini 2?

[@Bravoconcealment]

No we don't. Sorry

[@kennethpbowen]

How about an open bottom holster? No place for brass to get caught.

[@69CamaroSS]

So, it’s been 5 days under a year since this video was uploaded. Still no news on the wing you mentioned that you’re working on for the torsion holster?

[@Bravoconcealment]

It's coming 👍🏼

[@69CamaroSS]

@@Bravoconcealment ETA?

[@Bravoconcealment]

@@69CamaroSS We don't have one as of yet. Sorry

[@salty_terminal_civilian5374]

You say anywhere around the waistline, how much cant angle does it have?

[@Bravoconcealment]

This would really depending on the gun setup. Please contact our customer service department @ [phone] Mon- Fri 9-4 central time and a representative will be more than happy to assist you.

[@danielrimer8772]

I don't see any video there is only audio

[@monarchpixels]

Advantage of paddle vs loops.

[@ericp.9826]

Why none for Taurus G2C/G3C?

[@JoshBenware]

Only for good guns

[@thelos8093]

Why you have the fde color on the video but not available on the website?

[@Bravoconcealment]

Where do we have an FDE holster?

[@thelos8093]

@@Bravoconcealment 3:57 mark of the video

[@Bravoconcealment]

@@thelos8093 Oh yeah. That is an old video made when we did offer FDE. Sorry about that.

[@thelos8093]

@@Bravoconcealment when are you guys releasing different colors again? I'm sure many of us would like the fde, camo patterns...

[@Bravoconcealment]

@@thelos8093 Not sure. Sorry.

[@tonylopez5239]

Why can't you just make one for the glock 43 w/TLR6

[@Bravoconcealment]

Because it's not a very popular option compared to other options that are out there that we need to make. Example: G43X MOS, G48 MOS, P365XL etc...

[@gdaniels3376]

Can you please assist me

[@justindecesaro2662]

Who's Abra Maranda ?

[@Bravoconcealment]

Abner Miranda is a former police officer with much experience in training and survival tactics. He is currently a firearms instructor. Feel free to check him out on our blog, he provides great content. www.bravoconcealment.com/pages/abner-miranda-bio

[@justindecesaro2662]

@@Bravoconcealment Thank you for responding!

[@tremaynepayne1303]

Iwb needs metal clips