Very impressive well-made video. I have the same vehicle and the same need with a wheel set in mind. I wish you all were local to me here in the Maryland area. I guess I could always do a road trip once the gas prices chill out again. I will check out your website for the part list you mentioned. Thanks again and take care.
@bradb73713 жыл бұрын
awesome detailed video, wish there were more people doing videos like this. thanks!
@BreakersStereo3 жыл бұрын
Thanks!
@mikelandrum4524 Жыл бұрын
So why didn’t you change out rear shocks?? Didn’t you add spacers on the axle
@Abaca5592 жыл бұрын
I had the 3.5” sst lift on my 2019 ram. And the front is just above 38” from ground to bottom of fender. The rear gianed a true 2” lift and is at 41” in height. Prior to having it installed the front was right at 38” with my 2” leveling kit. Why did I not gain any addition lift in the front??
@tyler04303 жыл бұрын
Great job and thank you so much. Appreciate your unselfishness.
@FullDrawOutdoors3 жыл бұрын
So how tight do you tighten the 4 rear control arms after the springs are in, and did you do a alignment once everything was together? I've also been told the front control arm needs to be tighten once the truck is on the ground so it dont wipe out the bushings, is there any truth to this?
@agustinherrera56002 жыл бұрын
Does this truck need a differential drop kit to keep the cv axles straight?
@BreakersStereo2 жыл бұрын
This truck is a 2wd drive. But the kit is for either or and doesn’t come with a diff drop
@agustinherrera56002 жыл бұрын
@@BreakersStereo do they sell diff drop kits for these trucks?
@jonathonruelle68743 жыл бұрын
Could you use spring compressors in the rear vs disconnecting everything
@TheBillykurtz4 жыл бұрын
On the ready lift website they said this would fit 35x12.5 on 20x9. From what you can see is this realistic. I worry about the tire hitting the upper control arm and or rubbing.
@BreakersStereo4 жыл бұрын
Ok in the video we used the factory tires but if you look at the thumb nail we changed out to tires to 35x12.50 20 on the stock 20s. I want to say they are 20x9 or maybe 8.5 wide and if I had to guess on the offset I would say +15..... so as long as you stay within those parameters you should be good. There was no rubbing on the upper a arm and we didn’t have to trim.
@brandonperschon4494 жыл бұрын
I also installed the 3.5 ready lift and installed 35x12.5x20s on the stock rim. I only had to trim the far inside of the splash guard I installed.
@martinsuarez18703 жыл бұрын
@@brandonperschon449 can you share a pic of your truck? I'm thinking of doing the same setup with the same stock wheels in the video
@brandonperschon4493 жыл бұрын
@@martinsuarez1870 I have a video uploaded on my channel. Should be able to find it by searching for me. However I am going to be removing the ready lift set up very soon. I explain some of the reason in my video but basically I don't like the ride at all and it is very noisy. Started squeaking really bad recently. Although I'm dropping down to a 2.5" level I'm super excited to be getting a Carli performance package installed on it. It's a lot more money but I love the truck and want to love the ride. To me that's more important than the look.
@kmilohernandez6862 жыл бұрын
Hi, can thiscbe done in the same truck but 2wd?
@SkillAmazesYou2 жыл бұрын
How many mpg did you lose with the 3.5 lift?
@vazingear75424 жыл бұрын
Can you guys do a zone 6 inch lift for the same truck?
@ReveredDead3 жыл бұрын
It shows 2wd/4wd on the website. Can I install this on a 2wd? I know it seems like a straight answer but I am hearing conflicting things on different websites and videos.
@gilsaucier54923 жыл бұрын
Doing this type of lift, how does effect the overall ride?
@heavyhitta68392 жыл бұрын
Is this a 2wd? Where is the front CV axel?
@BreakersStereo2 жыл бұрын
Yes 2wd
@nicolasvillacis70793 жыл бұрын
How much would you charge me to install this kit
@garyrussell80034 жыл бұрын
Great/informative video. Thanks.
@victorgarza87864 жыл бұрын
I install a 3.5 lift similar to this and have 24s on 35 just went to rotate my tire rear ones are smooth but front ones are not had balance and alignment ride has a little vibrant. Tire guy said i need longer struts but can't find for 3.5 lift. What do u recommend
@BreakersStereo4 жыл бұрын
Ok let me see if I can help ... first what year is your truck and what kit do you have?
@milan2k112 жыл бұрын
Good stuff.
@bobbywaraich72023 жыл бұрын
Can we put 22x12-44 with 35’ tires with this lift on Ram 1500 2021 ?
@BreakersStereo3 жыл бұрын
Not recommend unless you really want to cut a lot. I would suggest a taller lift. 6” +
@rgotchu4 жыл бұрын
Do you have a video for installing a 3inch Fabetech lift for 2020 Dodge Ram 4x4 Laramie?
@BreakersStereo4 жыл бұрын
No not yet.....but if it’s the FAB-K3168 it’s has the same components. So this video should help out. The only thing difference is that this was a 2WD so we didn’t install the diff spacers.
@rgotchu4 жыл бұрын
I installed the K3167 and brought the truck to a good stance. I noticed that the measurements from the tire to the fender in the back is about 9.5 inches and the front is about 7.5. I thought that the numbers would be even but I only assumed that the kit was also a leveling kit. This is a 2020 Dodge Laramie.
@BreakersStereo4 жыл бұрын
@@rgotchu Did you noticed that much of a difference before you installed the kit? Yeah that kit is just spacers and a arms so I the only thing that could have caused the difference is the a-arm? Have you contacted Fab tech to see why ? We didn't notice a difference in the one we did with the ReadyLift kit
@angelmartell19213 жыл бұрын
Will 20x12s on 33s work with this kit
@BreakersStereo2 жыл бұрын
It would need major cutting..
@raularcos85522 жыл бұрын
W are this place i need lift my truck
@raularcos85522 жыл бұрын
Nice
@rocoroco57493 жыл бұрын
You notice how they say it looks nice but that drive like shit I own at 2021 ram Just spend a little bit extra money and get the coil over boil overs are you will not be happy and will want to take this lift out and put a better one i
@romanslifestyle63123 жыл бұрын
Mannnn I was with you until you cut off those threads off. Those will not hit. Now you screws that person if they ever want to take that lift off and go back to original.