BREAKING: A cheaper table saw that won't cut you! (And 8 other COOL tools!)

▼EXPAND FOR LINKS TO THE TOOLS▼
Watch more Cool Tools videos here► • Cool Tools Series
Tools used in this video:
- Milescraft GrabberPRO: amzn.to/3WkA4j4
- DustRight hose adapter set: amzn.to/3ALtPN0
- ISOtunes Lite (15% off the sale price thru 11/30/22): bit.ly/STUMPY15
- ISOtunes (10% off sitewide, use anytime): bit.ly/3BHYdH7
- Narex Richter Chisels (full sets are 15% off): lddy.no/s9fl
- Anti-vibration gloves: amzn.to/3OGqwML
- SawStop CTS: amzn.to/3AN9t69
- Coofly Power Banks: FAILED AFTER VIDEO - DO NOT BUY!
- Yeti 10oz tumbler: amzn.to/3tYsIpq
(If you use one of these affiliate links, we may receive a small commission)
(Taylor Toolworks, ISOtunes and Milescraft are sponsors of Stumpy Nubs Woodworking Journal)
★THIS VIDEO WAS MADE POSSIBLE BY★
Bits & Bits Astra-Coated Router Bits: bitsbits.com/ref/6213/
Please help support us by using the link above for a quick look around!
0:00 Chapters
1:05 GrabberPRO
3:19 DustRight Adapters
4:22 ISOtunes discount
5:45 Richter chisels
8:41 Anti-Vibration Gloves
9:46 SawStop CTS
14:37 Power Bank
17:03 Cheap Tool
Some other useful links:
-More videos on our website: stumpynubs.com/
-Subscribe to our e-Magazine: stumpynubs.com/browse-and-sub...
-Check out our project plans: stumpynubs.com/product-catego...
-Instagram: / stumpynubs
-Twitter: / stumpynubs
★SOME OF MY FAVORITE CHEAP TOOLS★
-123 Blocks: lddy.no/vpij
-Mechanical Pencils: amzn.to/2PA7bwK
-Lumber pencil: amzn.to/2QtwZjv
-Pocket Measuring Tape: amzn.to/2kNTlI9
-Irwin Drill Bit Gauge: amzn.to/2AwTkQg
-Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK
-Self-Centering Punch: amzn.to/2QvbcrC
-Self-Centering Bits: amzn.to/2xs71UW
-Angle Cube: lddy.no/10nam
-Steel Ruler: lddy.no/10mv7
-Utility knife: amzn.to/3nfhIiv
-Center-Finding Ruler: lddy.no/10nak
-Bit & Blade Cleaner: amzn.to/2TfvEOI
-Digital depth gauge: amzn.to/3mwRf2x
-Wood Glue: amzn.to/3mqek6M
-Spade Bits: amzn.to/3j8XPtD
★SOME OF MY FAVORITE HAND TOOLS★
-Digital Caliper: amzn.to/384H1Or
-Marking Gauge: lddy.no/10muz
-Marking knife: lddy.no/10mv0
-Narex Chisels: lddy.no/sqm3
-Stanley Sweetheart Chisels: amzn.to/3y5HDOc
-Mini Pull Saw: amzn.to/2UEHBz6
-Gent Saw: lddy.no/ss2x
-Coping saw: amzn.to/2W7ZiUS
-Shinwa Rulers: lddy.no/zl13
★SOME OF MY FAVORITE POWER TOOLS★
-Miter Saw: amzn.to/3gqIlQ8
-Jointer: amzn.to/3yc3gfZ
-Planer: amzn.to/3mn6BGF
-Router: amzn.to/3grD22S
-Sander: amzn.to/3DdvD0Y
-Cordless drill: amzn.to/3D9ZiIm
-Brad nailer: amzn.to/3gsRkjH
-Mini Compressor: amzn.to/3mvrmQr
-Bladerunner: amzn.to/2Wl0TtJ
-Jig Saw: amzn.to/3zetTBY
-Scroll Saw: amzn.to/3gq9qDc
-Multi-Tool: amzn.to/3muZuMi
★SOME OF MY FAVORITE OTHER TOOLS★
-Drill Bits: amzn.to/3B8Ckzh
-Forstner Bits: amzn.to/3kk3wEI
-Shop Vacuum: amzn.to/2Wkqnbl
-Machine Setup Blocks: amzn.to/3gq7kDh
-Counter-Sink Bit: amzn.to/37ZukUo
-Featherboard: amzn.to/3DeqHsq
-ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7
(If you use one of the affiliate links above, we may receive a small commission)

[@StumpyNubs]

▼EXPAND FOR LINKS TO THE TOOLS▼ Watch more Cool Tools videos here►kzbin.info/aero/PL-gT7JMZFYjdW0383kgJVMj0ocXbLXtpQ *Tools used in this video:* - Milescraft GrabberPRO: amzn.to/3WkA4j4 - DustRight hose adapter set: amzn.to/3ALtPN0 - ISOtunes Lite (15% off the sale price thru 11/30/22): bit.ly/STUMPY15 - ISOtunes (10% off sitewide, use anytime): bit.ly/3BHYdH7 - Narex Richter Chisels (full sets are 15% off): lddy.no/s9fl - Anti-vibration gloves: amzn.to/3OGqwML - SawStop CTS: amzn.to/3AN9t69 - Coofly Power Banks: FAILED AFTER VIDEO - DO NOT BUY! - Yeti 10oz tumbler: amzn.to/3tYsIpq (If you use one of these affiliate links, we may receive a small commission) (Taylor Toolworks, ISOtunes and Milescraft are sponsors of Stumpy Nubs Woodworking Journal) ★THIS VIDEO WAS MADE POSSIBLE BY★ Bits & Bits Astra-Coated Router Bits: bitsbits.com/ref/6213/ *Please help support us by using the link above for a quick look around!* Chapters 0:00 1:05 GrabberPRO 3:19 DustRight Adapters 4:22 ISOtunes discount 5:45 Richter chisels 8:41 Anti-Vibration Gloves 9:46 SawStop CTS 14:37 Power Bank 17:03 Cheap Tool *Some other useful links:* -More videos on our website: stumpynubs.com/ -Subscribe to our e-Magazine: stumpynubs.com/browse-and-subscribe/ -Check out our project plans: stumpynubs.com/product-category/plans/ -Instagram: instagram.com/stumpynubs/ -Twitter: twitter.com/StumpyNubs ★SOME OF MY FAVORITE CHEAP TOOLS★ -123 Blocks: lddy.no/vpij -Mechanical Pencils: amzn.to/2PA7bwK -Lumber pencil: amzn.to/2QtwZjv -Pocket Measuring Tape: amzn.to/2kNTlI9 -Irwin Drill Bit Gauge: amzn.to/2AwTkQg -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK -Self-Centering Punch: amzn.to/2QvbcrC -Self-Centering Bits: amzn.to/2xs71UW -Angle Cube: lddy.no/10nam -Steel Ruler: lddy.no/10mv7 -Utility knife: amzn.to/3nfhIiv -Center-Finding Ruler: lddy.no/10nak -Bit & Blade Cleaner: amzn.to/2TfvEOI -Digital depth gauge: amzn.to/3mwRf2x -Wood Glue: amzn.to/3mqek6M -Spade Bits: amzn.to/3j8XPtD ★SOME OF MY FAVORITE HAND TOOLS★ -Digital Caliper: amzn.to/384H1Or -Marking Gauge: lddy.no/10muz -Marking knife: lddy.no/10mv0 -Narex Chisels: lddy.no/sqm3 -Stanley Sweetheart Chisels: amzn.to/3y5HDOc -Mini Pull Saw: amzn.to/2UEHBz6 -Gent Saw: lddy.no/ss2x -Coping saw: amzn.to/2W7ZiUS -Shinwa Rulers: lddy.no/zl13 ★SOME OF MY FAVORITE POWER TOOLS★ -Miter Saw: amzn.to/3gqIlQ8 -Jointer: amzn.to/3yc3gfZ -Planer: amzn.to/3mn6BGF -Router: amzn.to/3grD22S -Sander: amzn.to/3DdvD0Y -Cordless drill: amzn.to/3D9ZiIm -Brad nailer: amzn.to/3gsRkjH -Mini Compressor: amzn.to/3mvrmQr -Bladerunner: amzn.to/2Wl0TtJ -Jig Saw: amzn.to/3zetTBY -Scroll Saw: amzn.to/3gq9qDc -Multi-Tool: amzn.to/3muZuMi ★SOME OF MY FAVORITE OTHER TOOLS★ -Drill Bits: amzn.to/3B8Ckzh -Forstner Bits: amzn.to/3kk3wEI -Shop Vacuum: amzn.to/2Wkqnbl -Machine Setup Blocks: amzn.to/3gq7kDh -Counter-Sink Bit: amzn.to/37ZukUo -Featherboard: amzn.to/3DeqHsq -ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7 (If you use one of the affiliate links above, we may receive a small commission)

[@todd1531]

Love your videos Stumpy Nubs

[@DanTuller]

ISOtunes Lite discount isn’t working

[@StumpyNubs]

@@DanTuller It's applied at checkout.

[@HeWhoIsWhoHeIs]

Milescraft is one of my favorite brands, they make the coolest stuff.

[@vladimirpodlesak]

Being from Czech Republic, it's always nice to hear that someone outside CZ, even Europe, recognizes the manufacturing history of CZ. There's less and less such companies that have the history and we must appreciate every single of them. Just a tip on the pronunciation of the "c" letter, it's always "ts", not "k" in Czech. So, for example, Vaclav is "Vatslav", not "Vaklav" 🙂 Thanks for all the tips, it's always nice to see a new video from you in the feed.

[@honzikkrobotu479]

I totaly agree!

[@jamespyacek2691]

Ahoj! That's really good to know about the pronunciation! My Girlfriend and I are studying Czech in preparation for our trip to Czechia in the Fall, and we did not know this. Thank you. ( as you can see, my name is Czech, originally "Pijacek", and we are going to the place of my ancestry in Moravia). Cheers! BTW, we thought the "c" with a ^ over it was the way to indicate the "ch" sound.

[@Greenlightmike33]

I’m a few weeks in with my Sawstop CTS (first table saw). Had to tune it a bit but it’s working great now! Thickness planer coming tomorrow… eventually I’ll complete the holy trinity with a jointer. Thanks for helping me with getting everything setup with all of your videos! If you ever head over to GR let me know. I work at the big brewery there and would love to buy ya a beer as a thanks. 🍻

[@richpeggyfranks490]

Great video. I have the "other manufacturer's" Grabber pushblock and completely agree with your evaluation. If anyone has ever grimaced when pushing a sketchy piece through the saw blade, this tool will give you greater confidence in the cut. It really is great and falls into the category of "cheap insurance". I also have the DustRight vac adapters and the Narex chisels. One caveat I have found concerns the DustRight hose. It is super-flexible and stretchy. So, when it's connect to the shop vac, the small adapter causes some restriction and the hose collapses on itself. So, I use a different hose with the small adapter. I have used all these tools daily for years with great success and don't regret buying any of them. Thanks.

[@ipick4fun27]

I’m drooling over the chisels. But I hardly ever use chisels and I have a cheap set. It doesn’t hold the edges long. But for the one or two times I use them, takes seconds to sharpen b4 use. It’s hard to justify buying something so nice that I don’t use much. I learned the chisel sharpening technique from Stumpy, it’s super helpful. With a Diamond stone, I can get it razor sharp when I need to use it (even with cheap chisels).

[@MortimerSugarloaf]

The Richters are actually worth every cent even at the current price. I got a six pack when it was about a hundred bucks cheaper a couple years ago and I feel like I robbed Taytools at that price. They do sell them individually if you want to ease into the cost, though. Maybe pick up your favorite 2 or 3 sizes over time. Treat yo'self.

[@kermitfrog6350]

Got mine in May 2020 for pennies under $100 on Amazon. I agree...worth every penny.

[@SteveInPalmSprings]

Great round up just before Woodworking Season! I especially value your comments about various tradeoffs. Good tools like these can do many things - but not everything. Knowing the limitations before you buy is invaluable.

[@scottdrummond1190]

Love this channel. Always help to see a craftsmen take on problems. Thanks for the ISOtunes hook up.

[@TTSetters]

I ordered those grabber pros. Two of them to be exact, the second I saw you walking a piece on the table saw, I was sold! 35$ a piece is great, been thinking about getting some sort of block for a long time.

[@jimp7015]

I've had the DustRight system for quite some time and while they work as advertised, the adaptors loosen up over time and need a hose clamp in order to be useful for any portable application. they stay well enough on stationary tools.

[@RAkers-tu1ey]

Really great, thank you. I used a small contractors jobsite saw for decades, but I am now 67, and I don't feel quite as competent as I did at 30. This puts me over the top on getting a Saw Stop. I also checked out your previous myth buster on the SawStop. Also Great.

[@jamespyacek2691]

I'm 67 too and have been a carpenter forever and so been using a portable saw all this time. I couldn't afford a Saw Stop so I just bought a Delta contractor's saw. I LOVE having a solid shop saw now! (the saw stop is also to large and heavy for me since we are renters and may have to move it now and then. Plus the Delta is on wheels, which is great for my small space).

[@journeyofawesome8473]

I had started looking for Random orbit sander's dus ports not 3 minutes before i got to the Dust right adaptor section of the video. If nothing else, you saved me a lot of time.

[@norm5785]

All great tools to have. Thank you for sharing this with us today. Stay safe, happy, warm and healthy. From Henrico County Virginia

[@chriswindberg5010]

I have the flexi port kit and have to say its awesome, especially for sanding. The hose is super flexible and easily goes exactly where you need it to go.

[@robandsharonseddon-smith5216]

Seconded - awesome. A little heavy but so easy to use...

[@3frogltd987]

I've had the flexi kit for a short while, the hose is somewhat heavy and the coiling is stiff to the point it can pull a small sheet sander off the bench. Any suggestions out there, do I need to break-in the hose by stretching it out to the limit and keeping it extended for a couple hours to help relax the wire coils?

[@Alexandra-Rex]

Thank you! You always make great Cool Tools videos, but today you really addressed something I've struggled with fixing. The shop vac adapter! It's actually not long ago I asked about it in the comments to one of your videos. This kit could not be shipped to my location (Norway), and the UK version of Amazon didn't have it. But now I know of this kit and I will look around for it.

[@rpavlik1]

If you can get access to a 3d printer, that's another way to solve that problem.

[@I_Can_Do_That]

Really appreciate your videos. It’s good content from a reputable source. Thank you

[@KOutOfMyYard]

You are a video machine! And the best thing about them is the quality and consistency from a small, family run business that I like to support.👊🏾

[@olddawgdreaming5715]

Thanks James for the great COOL TOOLS today and all the great info about them. We appreciate your channel so much. Fred.

[@ashokmoghe8035]

I have come to love Miescraft tools. Very affordable with quality and also great customer service. Great for a hobbyist like me who can't justify a lot $$$$ spent in tools.

[@isaacplaysbass8568]

Thank you as always James; it's not just Cool Tools, it's Drool Tools.

[@kenbrown2808]

hadn't thought about the CPAP factor for battery based power systems. my wife needing to use a CPAP severely limited our camping options. I've thought about assembling a power supply for it, and as I said - didn't think about it when these hit the market.

[@FormerlyKnownAsAndrew]

My woodworking slows down a bit in the winter. Canadian winters are cold as heck in a poorly insulated garage.

[@aaronalquiza9680]

i have a milwaukee battery powered tablesaw with a rack&pinion fence and i just push or pull the fence if i need to adjust it by a lot. then i use the knob if i need to do tiny adjustments.

[@richardlug6139]

Same with my skilsaw that has R&P fence. I have not seen the price for this, but I am sure you are paying a lot for the tech. If you need a portable saw I think I would just go for a cheaper one like the Dewalt or skilsaw.

[@steveskouson9620]

I put together a SawStop CTS a few weeks ago. Looks like a typical SawStop saw. Which is pretty dang good! (Been in love with SawStop, for over 3 years now. Had a few customers come in, in bandages, to buy one.) steve

[@SeamlessFab]

They didn’t come in in tourniquets?

[@watermain48]

Cool stuff James. Thank you.

[@pierreklee8032]

Thank you!!!!!!!!!!! I have been looking for a hose adapter for my different tool ports. now I have one!!!!

[@necrojoe]

The thin kerf blade for the sawstop is a great idea, but do they offer a thin-kerf riving knife?

[@michaelkolozsvari3575]

Absolutely love my SawStop and IsoTunes (which I heard about from you) love the fact that I can feel confident to have my kids better protected when working in my shop! Thanks as always for the new Cool Tools episode!

[@MortimerSugarloaf]

The Richters really are top notch. I don't regret that purchase for a second. Don't feel any worry about clicking the link and snagging a set. There is no better value on the market, IMO.

[@philshock3805]

At the risk of interfering with Stumpy's affiliate bucks, Rockler has the Dust Right hose kit for $20 (50% off), for the next couple of days. I've had it for a few years and use it all the time - love it but that hose is heavy. Not a deal breaker though ... the adaptability is fantastic.

[@markb5441]

Thanks for the reviews. Happy Holidays!

[@willhoward9190]

GREAT video. I will be using it as my reference in the future.

[@J.A.Smith2397]

So far every mention in cool tools videos have been SPOT ON! For purposes intended. Another block n the build of our partnership blue!

[@sflagg0817]

Thanks for the CTS section I just placed my order today for mine .

[@scottmartinezguitarandbass]

I got that dust right adapter a few months ago, and good news!! It works for the Triton Router (MOF001), which has a notoriously hard to fit port!

[@MCsCreations]

Really awesome tools, James! Thanks! 😃 Stay safe there with your family! 🖖😊

[@alberttibbets6567]

I'm not a "Cool Tools" fan (I have no tools budget) but I like how you present material and the patience you demonstrate in replying to comments. My favorite videos are the ones you make about tool history and I especially loved the talk on Shaker furniture. I found that fascinating and easy to follow. Make the videos you want to make. Thanks.

[@vantuanma5967]

Much appreciated your video & what you do!!!

[@arnoldolorenzo3474]

Omg, the hose did it for me. It’s like you knew what drives us the craziest. Lol😂

[@websherpa]

Thanks for the Cool Tools episode! SawStop was paying attention to the Dewalt portable table saws or re-licensed from same supplier. Fence system and saw table seems nearly identical.

[@AaronGeller]

The rack and pinion style fence is shared by about 5 different saw manufacturers, but the R&P fence from Dewalt is different from Sawstop's.

[@photonashville]

Search patents online and you will find Dewalt was not the first, Black & Decker patented the rack and pinion fence decades ago.

[@cuebj]

@@AaronGeller Nice to see 'different from'

[@AaronGeller]

@@cuebj they are indeed different as to how the rail is supported at full extension. The Dewalt has a long metal bar while the Sawstop has a hard plastic wheel on which the fence rides.

[@tim8767]

Great Cool Tools Episode.

[@paulyanney3151]

Great information thanks 👍

[@Swarm509]

I'm currently using an early generation Dewalt contractor saw I got for free and that SawStop pretty much has every feature I would like to see mine have for regular use, including the actual cartridge. I cannot justify the cost to buy one (several thousand here in Canada) but if I ever get another table saw it a SawStop is the only choice. Really other companies should be working with them to get the cartridge into more saws, and if they ever release a system to retrofit an older saw I would get it in an instant. In the meantime that GrabberPRO looks like a great safety upgrade for my workflow with smaller pieces of lumber.

[@robertstewart9658]

I ordered some tools today and almost got a Grabber Pro. I opted for their Exactimate measuring tool and a digital angle finder instead. But I got it covered: I told the family to get me gift cards this Christmas and I would take care of the rest.

[@shanen457]

Wow! Looking at the shelves behind you, your like, an organized tool hoarder!

[@manmademaker6551]

Best Cool Tools yet!

[@gteam53]

I love these videos!

[@daveknott4563]

Milescraft makes good jigs found near kreg items at your store. "Nearly half the price" was my thoughts too. Love this!

[@davidelliott5843]

I use silicone hose (as used on car radiators). You can get all sorts of tapers and bends in a huge range of sizes.

[@fudpukker]

Great work James. Now go enjoy a well deserved rest over the festive season!

[@Nick-iz9zo]

I love the cool tools videos! I'm saving up for the Sawstop CTS. Those are some nice chisels as well! Love all the content, James!

[@crustycurmudgeon2182]

How'd you find the price? It's not listed on the site James gave.

[@Nick-iz9zo]

@@crustycurmudgeon2182 the base price for the saw is $900 plus a $75 shipping fee. It's also available on sawstop's, rockler, woodcraft, and home depot's websites. I think the stand is $129

[@StumpyNubs]

You have to select a seller to see what they will charge. Click on "buying options"

[@kstangent]

Dewalt has one that has many of the same features, including the fence system. It looks like this one copied those features. The Dewalt also has the ability to accept dado sets. This one has some advantages, mainly the safety features and the zero clearance ability on the blade without having to make your own inserts. The build quality on this one may be better too, it's hard to say from the video.

[@Nick-iz9zo]

@@kstangent but the DeWalt doesn't have the safety system... For me personally, I'd rather have the added safety. The job site pro saw that sawstop makes can take a dado set but the compact one is too light weight to safely stop the dado stack fast enough. There are also other saws with the same style fence, not just DeWalt.

[@gavinmiles5545]

Take a look at fingerless cycling gloves/mitts as an alternative to the anti-vibration gloves, they appear to be pretty much the same thing and a bigger variety on offer.

[@StumpyNubs]

I've never seen a cycling glove with a gel palm, but if so, then they would work. But I doubt they would be cheaper.

[@mghumphrey]

I picked up a set of the ISOtunes after I saw them in one of your previous videos. I can’t believe how comfortable they are. They were well worth the money.

[@TrevorDennis100]

I have the Isotunes Link ear muffs, which I don't find comfortable. They are too tight and there is no way to reduce the tension, so they make your ears sore after 30 minutes or so.

[@erithanis]

Question, does the mic output ambient sounds so you can hear people talking until the protection cuts in? Similar to electronic gun ear protection? I couldn't understand the marketing material.

[@mghumphrey]

@@erithanis No, I wish they did.

[@erithanis]

@@mghumphrey you might look at the walker silencer earbuds. I was hoping for maybe a cheaper option.

[@TrevorDennis100]

@@erithanis I don't think so. I have some Apple Airpod Pro 2s that have what they call Transparency mode. They let normal sound through, but NC is supposed to kick in with loud sounds. IME that does not work well. Using an airline to blow dust, for instance, is deafening! In full NC mode they are OK though. I also have Bose QC35s which I have been using in the workshop for a couple of years, and the NC is excellent on those. The ISOtunes Link work well to keep all sound out, but of the three, the QC35s are the only ones I can keep listening to my audiobook while using the tablesaw. I use the Airpod Pro 2s when walking the dog so I can hear traffic coming.

[@grahamrankin4725]

Just received my Dustrite adapter

[@wolfman75]

Thanks Again For The Great Info On Cool Tools!!! I Appreciate It A Lot!!!!! Your The Man!!!! 🙏🙏🤔🤔😃😃👍👍😎😎👏👏

[@joshfrick566]

Thanks for the sawstop review! Saw the new model was released recently but haven’t seen any other reviews yet. Still not sure if I should get this one or the rolling one though.

[@StumpyNubs]

I like the added size of the rolling one (the Jobsite model). But they are both capable saws for light work if you do your joinery with a router table.

[@aaronhinkle1270]

Stumpy, how does the SawStop CTS table flatness compare to the JSS? I have the JSS and am looking for a small saw but with a better build quality. I really like the idea of the rack and pinion fence compared to the JSS fence. Too bad we can't get the Festool/SawStop TKS 80 in the States...

[@_P0tat07_]

That little sawstop looks awesome. I love the fact that it uses trunnions. Not having to change that table insert for different blade angles is huge. Not supporting a dado stack wouldnt bother me at all. Never used one. Always used a router if I need a dado.

[@kaasmeester5903]

Looks like a well thought out piece of kit with some clever features. I'm still jealous of those nice saws, in Europe we still only have the Festool TKS 80 if we want Sawstop (and that thing has issues)

[@williamstead6354]

@@kaasmeester5903 What are the issues with the Tks80? I've considered buying one, but haven't gotten around to doing my research yet. Lot of money to pay for a machine with issues...

[@kaasmeester5903]

@@williamstead6354 Better look at some of the reviews on YT. Whether this thing will work for you depends on what you plan to do with it, some people are happy with it. The two issues that have me worried: 1) No rail in the table for crosscut sleds or feather boards. 2) It uses a proprietary fence system, that some have found to be something of a pain to set up and maintain in alignment. Well, that and the price tag. Though keep in mind I haven't done enough research on it yet either, I just watched a few reviews

[@williamstead6354]

@@kaasmeester5903 Thanks. The lack of miter slots was the one weakness I noticed. I could maybe live without, but at that price, a dodgy fence is not acceptable. I'll definitely look into that before I even consider taking out my wallet. Thanks for the warning.

[@crossgrainwoodproductsltd9230]

The Saw Stop tablesaw is a safer alternative for those who want to intergrate a tablesaw into a workbench giving you a larger support surface.

[@noodlelynoodle.]

I just wish they weren't a garbage company who sues competition to keep a monopoly, the Bosch version was so much better and didn't ruin your blade

[@thedevilinthecircuit1414]

The rack and pinion and flip fence are taken directly from the Dewalt range of jobsite and benchtop saws. I'm a huge fan of those features. On the Dewalt, you don't have to rotate the knob to move the fence; instead, grab the fence and push it left or right. It works smoothly.

[@StumpyNubs]

Dewalt isn't the only saw with a rack and pinion fence.

[@gregariouswoodworks1270]

WOW those Narex chisels are beauts!

[@dpmeyer4867]

thanks

[@tim_biller]

I know Festool offer the SawStop tech over here in the UK but I really wish they’d bring this one over.

[@JackWagonOne]

That fence on the SawStop looks just like the one on my Dewalt FlexVolt TS!

[@lxfxmstr]

Great reviews as usual. Thanks. FYI: the S1000S has a bunch of negative reviews - mostly about it not taking a charge, either out of the box or after about a month. So everyone should do some research.

[@genghisbunny]

I was hoping this was the announcement of the first post-patent-expiry safety saw from another manufacturer. Still, good to see a cheaper(ish) option for the US market from them.

[@rhinogames9856]

When is their patent up

[@307mtb]

Rockler is now selling the vacuum hose with quick change fittings that you leave on the tool. Kind of like the fitting used for an air hose

[@tummytub1161]

The Festool sawstop combo works out I see👍

[@Alexnco1]

The new mini SawStop sure looks a lot like my jobsite DeWalt. Many of the same features (except the big safety one!)

[@MemelordSupreme]

exactly. The dewalt is cheaper and it can accept a dado stack too.. Sawstop is not worth it.

[@garryrr]

Hi James, while you have that CTS there have you by any chance checked the table for flatness? The Dewalt version is definitely not flat so I'm curious? Tnx for the great channel!

[@StuffWithKirby]

I have one and it is not flat at all around the blade. I emailed customer support and they don’t guarantee any sort of flatness. But for a sled it should be good enough.

[@triktrak_1451]

Yeah, those chisels are the shiznit. And I agree about the Yeti, though I need my bigger size because I drastically dilute my coffee.

[@BRICOLAJELISTO]

Muy buen video a sido interesante. Un saludo

[@palantus]

Anyone know where to get that hose kit (or similar) in Europe? Amazon won't ship it here

[@PhilRMcGregor]

The fingerless Vibrastop gloves are listed as "Currently Unavailable" on the Amazon link provided. Superior Glove's website only displays the full Vibrastop glove on their website.

[@StumpyNubs]

They sold out from this video and should be back in stock in a few days.

[@kane2742]

18:20 "Of course, having my coffee cup on the bench while I'm filming would look funny on camera, so that's why I hide it behind this [other coffee cup]." 🤔

[@StumpyNubs]

😉

[@ApKNJ]

@@StumpyNubs but seriously...if the red mug isn't for drinking, what is it for?? Now I have to know. I remember your video about replacing the definitely-not-a-beer can coozie.

[@mattwilliams3456]

Well now I’m even more curious about the Redwings cup…

[@robertleemeyer]

Well, that takes care of MY Christmas list. 😊

[@bussergi]

I am quite new to the woodworking hobby. I am beginning to stack up some basic power tools, and I have around 15 m^2 of space for the hobby. And I mostly work with hardwoods. Will I be sorry to set a SawStop CTS? I want a table saw to build into one of my worktables. Cool video and I like that you emphasize safety :D

[@StumpyNubs]

If I was only using it in a workshop, I would want a more robust model. But if you are very limited on space, then a portable saw may be your only option.

[@bussergi]

@@StumpyNubs it the space is very limited. It already houses a 100x100 cm CNC

[@stereothrilla8374]

Ahhh! The relaxing sound of power tools while sitting around a camp fire😂😂😂

[@StumpyNubs]

Maybe you like to stare at a fire silently all day long, but I like to do things during the day and save the quiet contemplation for the evening.

[@stereothrilla8374]

@@StumpyNubs It was a joke. I love your channel. Your knowledge is greatly appreciated.

[@JoeGP]

you can improve any hardened tool by cooling it down, even just putting it in your freezer helps but not as much as liquid nitrogen temperatures and you can do it at any time, even years after initial hardening. It's just pushes the hardening process past where most would stop at.

[@SnootchieBootchies27]

I don't know how you killed 2 makita cordless routers. I got the plunge base for mine, and last spring I cut all of the mortises for a timber frame deck with it along with a template. They were only 3/4" deep and I took it in two passes but it actually suprised me how well it performed. I thought for sure I should be using corded but it worked.

[@StumpyNubs]

Who killed two Makita cordless routers?

[@SnootchieBootchies27]

@@StumpyNubs oh weird, I'm pretty sure I meant for this comment to land on someone else's video

[@DustinGebhardt]

Do the vibration gloves come in other sizes? I can't seem to find them on Amazon.

[@onlyfinsnyctest]

If it can’t cut me, how will I know it’s working??

[@TheNewports]

IKR,

[@makinnewcounts6676]

Hairs will still get cut so test by trimming up your pubic area, could probly use a grooming anyway

[@lechatbotte.]

Lol

[@troyqueen9503]

Don’t need iso tunes ,just pair my hearing aids 😂

[@HyperactiveNeuron]

You'll think that's funny until you get cut by a power tool. It gets ugly, painful and nightmarish very fast. I know a guy nicknamed 4 finger Mike because a saw took his left pinky finger and its medicarpal bone. If you didn't know you'd think he was born without it.

[@hassleoffa]

Stumpy recommendations - 10 points. Redwings cup on public display - (-3 points)

[@hendrst1918]

re: Sawstop CTS You didn't say anything about whether the top is flat. I have the larger SawStop JSS and the top is not flat which makes it virtually useless. In fact the top is so not flat that I have taken a grinder flap disk and orbital sander to it to try and flatten just the 6" on either side of the blade that I might use for ripping narrow pieces that I can't do on the track saw.

[@charlestaylor3195]

I know you don't work for those companies, but when you take the time to explain the features and how it works and you explain the draw backs, you really make a person feel as though they need that tool. When you explain the negatives it seems like you're just showing the limits. Those are some excelllent tools. I need some hearing protection, and I know what I'm going to get, and I 'll let you know how the Iso tunes work. Thank you.

[@StumpyNubs]

It's called Cool Tools for a reason. I only show the tools I think are cool. So obviously, the comments would be mostly positive.

[@charlestaylor3195]

@@StumpyNubs You have a point there. I ordered the Pro Aware, thanks for the discount.

[@Bang-C4]

Hi Stumpy I appreciate your channel and do respect your professionalism but I miss the humor of days gone by. I purchased the sawstop job site saw (thank you very much) but before purchasing it, I contacted the company and ask them if they had arriving knife to be used with a thin curved blade. They said they didn't recommend then curved blades with their saws. It's my assumption that it has to do with the breaking forces. Maybe it's different for that new compact saw but I thought I would mention this. Keep up the good work and I hope the characters of days gone by are still in the shop.

[@Bang-C4]

Hi @@jaysimmons2319 It may be a difference in the saw models. If you contact Sawstop again I'd be interested in their reply.

[@2smoothku]

Curious about your thoughts on the Sawstop CTS fence flex when fully extended. 731 Woodworks did a good video on it. Did you experience any of that? Your videos are always super helpful, especially those showing how to safely make challenging cuts. I owe you a drink for all the dumb cuts you saved me from trying!

[@StumpyNubs]

I saw the video where there appeared to be lot of sag in the fence rails at full extension. It seemed to me that the cams on his fence rails were simply out of adjustment, based upon a video Ron Paulk about his. (kzbin.info/www/bejne/a5zKfZKtf96eg9U) I am not sure why the SawStop rep did not explain that when he called, but the saw did just come out and it is possible the rep wasn't familiar enough with it..... Keep in mind, this is a portable table saw. It is not going to be as rock solid as a cabinet saw. (I don't have a Dewalt, but others have said that there is some movement in it's fence at full extension, as well, which does not affect it's accuracy.) That's one of the compromises you make for a less expensive tool, and you should consider that before making any purchase. I found the accuracy of this saw to be consistent with the type of saw it is, and apparently, so did Ron Paulk.

[@2smoothku]

@@StumpyNubs you’re the man! Thorough and quick reply. I have the Grizzly G0870 that allows Dado Blades, has a rack and pinion fence (like the SawStop and Dewalt), is variable speed, and has some other useful accessories like a disc sander attachment. I’m always surprised that more haven’t reviewed this table saw. For a jobsite saw I’m pretty impressed.

[@ealdydar]

Have they fixed the Saw Stop issue of when extended for ripping 24inches that the fence sags. I hate mine for that reason. My Dewalts dont do that. Just a bad rip off of the dewalts fence.

[@StumpyNubs]

Did you adjust the cams on the front and back fence rail? Ron Paulk made a video about it: kzbin.info/www/bejne/a5zKfZKtf96eg9U

[@ealdydar]

Thanks for the reply ill check that out. When i contacted Saw Stop about it they said that was normal.

[@ronhaefner7833]

Curiosity question. The hand over hand technique at 2:00 when using two push blocks, how would you compare that to sliding one block back then the other one using a "walking" technique?

[@StumpyNubs]

Do whatever is most comfortable for you.

[@Vaudeville100]

James, I bought a Sawstop cabinet saw when I retired in 2014. Over the years I've done tweaking and cleaning to keep my Sawstop running as efficiently as possible. But after nine years of hard but loving use, the time as arrived for a more thorough Sawstop tune up. It isn't practical for me to haul this heavy machine to an authorized Sawstop repair shop. Do you know of any table saw repairmen who can/will make an onsite visit to my home in Dexter, Mich. to carry out a complete tune-up? Thank you, Dennis

[@user-ig7uy5xu7k]

Can you recommend me some good Sander on Amazon for sanding a hard flooring and refinishing it buddy

[@J.A.Smith2397]

N been wanting one of those grabbers but never have enough money after work

[@frogpelt]

You hide your coffee cup behind a coffee cup? You are a savage.

[@mariushegli]

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

[@-ZIO]

I 100% agree with the vibration gloves. They were a game changer for me, I have nerve damage from frostbite. The ISOtunes I didnt care for. I thought the audio quality was poor at best. Fortunately they are a good company and give me a full refund.

[@Ryan82288]

So what is the red tumbler for 🤔

[@zafarsyed6437]

Anyone else notice the Coofly's pictorial for "Wall Breaking Machine"?

[@StumpyNubs]

I wondered if anyone would notice that- LOL! I have no idea!

[@timromano7085]

How does the Sawstop's dust-collection compare with that of the Dewalt 7491 or the larger Sawstop jobsite saw, which have a small dust port up on the blade guard as well as down below on the shroud? Did Sawstop offer any reason for not putting a blade-guard dust-port on the Compact while offering it on their larger jobsite saw? Its lack of dust collection is the only reason I'm thinking of upgrading my 8" Delta Homecraft.

[@StumpyNubs]

Any saw that has a dust collection hook-up on the blade guard itself will perform better. However, the people who tend to buy jobsite saws (contractors) are the least likely to leave the blade guards on, so it is often a moot point... I think SawStop opted against upper dust collection so they could make a guard that provided higher visibility in the hopes that more people would leave it on.

[@timromano7085]

​@@StumpyNubs A shame they made that decision. Dewalt and Sawstop have reputation for precise/accurate cut rivaling "woodworking" saws. Jobsite saws are the only contemporary option for hobbyist woodworkers with limited shop space who want accuracy, dust-containment, as well as modern safety features like a riving knife in a compact package. Nobody makes a modern version of the 1950s-era entry-level cast-iron-table contractor saw that comes without wings and without a long cabinet-saw-style fence. It's jobsite or nothing.

[@StumpyNubs]

@@timromano7085 You'd be surprised how many people (not just contractors) say they remove the blade guard for better visibility (a total crock of BS in my opinion). Besides, for both lower and upper dust collection to work effectively on a jobsite saw I would think you would need two shop vacs connected.

[@reallyfurious]

I'm interested in powered, anti-kick infeed rollers for table saws and routers but I'm not seeing much besides a few janky DIY projects. Something that's small and affordable enough for a modest 2 person workshop. Anyone know of such equipment?

[@StumpyNubs]

You mean a power feeder? www.grizzly.com/products/grizzly-1-8-hp-power-feeder/g4173?gclid=Cj0KCQiAj4ecBhD3ARIsAM4Q_jGyL-cD92vt8kfnJeQejlRUc071qEP9rEwYeG2Q2UexF-N1bOCQTBoaAvXWEALw_wcB

[@reallyfurious]

@@StumpyNubs ohh perfecto, thank you Mr. Nubs 👍👍🙏

[@Skenderbeuismyhero]

It won't cut me? Challenge accepted! Haha