Brew Day on the BrewBuilt Digital Electric BrewSculpture Pt 2 | MoreBeer!

[@angrydutchman8590]

Well, question answered! All I needed was another 5 minutes of the video to solve my theoretical problem. Keep up the great work!

[@jasonpolak5380]

I just watched a video interview with Olin Schultz!! I You need to do an interview with him on the Brew Sculpture! It would be awesome to see his thoughts! Thank you Olin for your vision and passion for true beer!!!

[@magride801]

This setup is a must have and definitely need

[@scottcarr9985]

Preflight looks good. No parasite drag on those vessels. Brings up the question. Will it come with a P.o.h. (operating handbook.) Or its first 10 gallon batch? We can call it the A10 Wort hog. Something that will blow you away. Is this thing autographed? A true family heirloom. I know I won't win it but I'll envy who does. Have a great Father's day everybody.

[@albertrettenmaier225]

Your tutorials are great! Thanks Guys!

[@MoreBeer_]

Thanks for watching! 🍻

[@lynhbrew]

Well done, easy to follow.

[@PolinskeAssociates]

very cool set up.

[@thomasnelson4273]

Wow. Cool give away. One of us will be lucky

[@RichardDePas]

Great video showing it isn't too complicated for the average brewer.

[@jeffkidwell5804]

I have a perfect space in my garage for this system. Fingers crossed.

[@emomoney]

A great addition to this video would be some information on the equipment profile used in your recipe editor. Evaporation rate, mash tun losses, etc. These are going to vary from system to system and if would be a great starting point for folks new to 3V or HERMS systems.

[@chadhewins754]

What an amazing setup!!

[@srlobaugh]

It's a dream set up

[@richard_aguirre]

Got to love that you put so much effort into demonstrating your products.

[@moribundjt]

Too cool, can't imagine having the privilege to brew with this. Good luck all

[@gnomebrewing]

Definitely a beautiful system! 😍

[@BrianSommers]

Very sweet system -- great how-to video too!

[@jefffanning3187]

Great video - I'm putting it on a continuous loop so after you deliver it, I'll be able to use this baby with my eyes closed!

[@MoreBeer_]

😂

[@robross6462]

Delayed start with temp control is an amazing feature! I set my stove to 4 then go to the gym but depending on the ambient and faucet water temps it may be way over when I get back.

[@jjbasab]

That's a great video on how to use it. I'm wondering what would be my first brew in that thing if I were to win it.

[@jasonaslanian3809]

Great video, despite a few years of brewing, some good tips and reminders in there!

[@dcfeeiv]

Very sweet setup. Can you show how to store it? Wife doesn’t want her garage taken over by more beer stuff…

[@Joeymuffs]

Nice video, hope I win it next week.

[@allanbrand]

Very nice system, great job! Is the controller wifi enabled? Was curious if it was able to get firmware updates or maybe Brewfather integration.

[@larrytaylor6192]

Great system! I do have a question. You did say it needed a 30 Amp AC Circuit. Is that a 120VAC or a 240VAC or does it need both. I'm a nut for details.

[@angrydutchman8590]

So . . . question . . . while I have wondered for the past couple of years whether or not to use one of my extra coiled chillers to do as you are here (basically a HERMS system), I have been worried about being able to really THOROUGHLY clean the chiller/heat exchanger. The last thing I would want is grains from the mash left behind in the chiller between brews. What is your process for doing this? Just use a pump to run through a boat load of PBW over the course of 5-10 minutes? Thanks

[@jasonpolak5380]

Awesome Video!! Very informative with a lot of great tips. We really appreciate the time you took to address potential issues that you guys had as well as issues other people may not have thought about. It seems like the system really saves a lot of time in Brew Day by allowing you to combine steps. Making your Wort clearer along the way is such a huge plus!! Easier clean up. Freaking love that!!! Thanks for the Video! Let me know when you need my address to ship it to me!!

[@rynorama]

Wow nice, the only thing these videos don't tell us is how the beer ended up tasting. You shouold make a short video on the beers you've made with it.

[@aaronscottmusic1]

Great video guys! It was really helpful to see the whole process explained. Aside from the fact that copper is a better conductor than stainless steel what was the reason for going with a removeable copper HERMS coil as opposed to one that enters and exits through the sidewall of the kettle? Cheers! 🍻

[@DaveCavalari]

Do you export these to distributors in other countries eg. Kegland?

[@philcross6037]

Why does it not have the heat exchanger in stainless, hard piped into the HLT? You don't usually need to clean the HLT. Do you use it for cooling also? It would look better if it were a hard piped coil in there and you had a heat exchanger under the boil kettle to cool it. It seems a bit expensive for what is there but that is probably the control system being a processor etc (which looks very good and premium). I am just fussy about the aesthetics of cables and hoses hanging everywhere. That sort of spoils the premium feel to me, but it's a good piece of kit and would gladly have one! I have a home built HERMS and run both pumps during vorlauf as one recircs the mash and the other recircs the water in the HLT which I find gives you better heat transfer in the exchanger. (I suppose you could wiggle yours around as it's not piped in 🤭) I am looking into your jacketed unitank also which looks good to me. Keep up the good work

[@GreatDepressionDeux]

What is your typical brewhouse efficiency with this setup?

[@homebrewer_john]

Oh man 🤯 I hope I win! 🤞🏼

[@SilbiBrewWorks]

Our gas system doesn't show the setup steps on the controller like your guys controller did. Is that normal? Also seeing one specifically on the gas system could be helpful too. I may know a spot to film......just saying.

[@Mark_Wood]

just give it to me already! 🤣

[@dstoffan89]

I know its everyone's least favorite part, but a video on that CIP loop would be cool always looking for more efficient cleaning.

[@adolfotavizon915]

My frist brew and I have and anoying beep beep. Is that normal?

[@adolfotavizon915]

I found the silence button, finally

[@curtpick628]

So purdy

[@kevingebert4316]

Sooo Shiny! Want to touch :)

[@irvomy]

it looks a little big and a burden I can take off your hands!