BREZZA/BALENO 2022 - How to Upgrade to WIRELESS Android Auto/Apple Carplay [2 WAYS] | OTA UPDATE 🔥

Brezza ZXI 2022 SmartPlay Pro/Pro+ Wireless Android-Auto Update
This method also works for Baleno.
In this video, I demonstrate 2 different ways to install the Wireless Android Auto/Apple Carplay OTA (over-the-air) update in Brezza ZXI and ZXI+
1. Phone (via SmartPlay Pro Sync App)
2. USB
SmartPlay Pro Sync App: play.google.com/store/apps/details?id=com.msil.infotainment.da.proxy
Website: www.global-infotainment-system.com/en/top.html
_________________________________________________________
Products I use:
1. pTron Charger: amzn.to/3H1bnCr
2. pTron Charger (w Cable): amzn.to/3iTODvY
3. boAt Charger (w Cable): amzn.to/3HjlkMT
4. Sheeba Liquid Polish: amzn.to/3J99c2f
5. SoftSpun Microfiber 340GSM (4pcs): amzn.to/3J6heZN
6. SoftSpun Microfiber 900GSM (2pcs): amzn.to/3iYouwg
7. Wavex Kit: amzn.to/3GXJyuO
8. ORJILO Microfiber Car Duster: amzn.to/3GVaNWF
9. Tygot Gorilla Tripod w/ Remote: amzn.to/3LcM43w
Key Covers:
10. Silicone Key Cover: amzn.to/3HnT8Iw
11. TPU Key Cover: amzn.to/3HmtFiL
____________________________________________________________
Timestamps:
0:00 - Update Details
1:04 - 1st Method (SmartPlay Pro Sync Application)
6:32 - Tips and Troubleshooting (1st Method)
6:42 - 1st Method (Continued)
9:30 - 2nd Method (USB)
15:38 - Tips and Troubleshooting (2nd Method)
16:32 - 2nd Method (Continued)
16:55 - Enabling WIRELESS Android Auto
17:56 - Setup and Test

[@neoa1421]

That's the best step by step guide I have seen, great efforts you have taken to make this information available for the community. Thanks a lot.

[@shahmeerathar]

haha that's quite a serious compliment, thank you! glad to know its serving the intended purpose :)

[@RiturajChhibber]

Thanks for the guidance, bro. I will get mine updated over the weekend using my phone.

[@shahmeerathar]

you're welcome, make sure to go through the comments once just so you can avoid making any mistakes that have been identified already

[@ronitkadam919]

Thank you Shahmeer! Was able to update the software in my car because of your video (used the USB method). The official documentation provided wasn't clear and missed quite a few steps. Glad you explained every step in detail.

[@shahmeerathar]

You are welcome! I am glad you found this helpful. Even I was quite surprised at how poor the brand's communication has been regarding the release of updates and the correct procedure to perform said updates.

[@nagarajaprakashdesu1433]

Thanks for the information I have just done it in my new breeza zxi car with pendrive done successfully

[@shahmeerathar]

good to know, enjoy the wireless connectivity!

[@nishantp201]

Thank You, it’s perfectly working 😊

[@shahmeerathar]

you're welcome! enjoy the wireless connectivity :p

[@sid25]

Worked like a charm! Thanks!

[@shahmeerathar]

Glad it helped!

[@gavinfernandes654]

Thanks a tonne for sharing this information! I was able to update my system successfully 👍❤

[@shahmeerathar]

you're welcome!

[@offbeatbang7866]

Hi Shahmeer, your video and inputs helped me upgrade to the new Version. Thanks a lot, God bless !!

[@shahmeerathar]

glad it helped, thank you!!

[@Pritam043]

Very nicely explained ! So glad to see this update from Maruti Suzuki

[@shahmeerathar]

thanks, yes it is a long awaited update

[@anshulgupta5495]

Thanks a lot for this detailed video. 🤟🔥😀

[@shahmeerathar]

you're welcome!

[@soundrapandianravichandran4315]

Fantastic ! Thank you ! I could not even locate the Maruti link to find out the process . A million thanks . Very professional video . Precise and concise

[@shahmeerathar]

i find it hilarious how difficult and unprofessional MSIL has made these things. no proper information or guidance even i got to know about the update a couple of days late

[@soundrapandianravichandran4315]

The smartplaypro sync didnt connect successfully at all inspite of bluetooth and wifi being connected. Tried with iOS and android phones. The bluetooth smartplay RCA icon does not get enabled for some reason . Tried restarting phones, app, car , deleting BT connections everything ! Have to try the USB update

[@shahmeerathar]

even i struggled with the connection initally how it worked for me was: 1. phone had to be connected to car bluetooth and wifi 2. i had to have the app open on my phone where its showing 'no vehicles detected' 3. then i had to tap on the smartplay sync icon to enable it maybe try triggering the factory reset on the Infotainment Unit, it has resolved some connectivity issues for me

[@soundrapandianravichandran4315]

@@shahmeerathar I took the easy way out and used the USB . Pain less process ! Thank you for a detailed yet concise video ( even for a techie like me) . It truly helped. I referred to your video in team-bhp thread on Brezza too with thanks. Wish you success and many more interesting and useful videos .

[@shahmeerathar]

@@soundrapandianravichandran4315 yeah, the apps aren't well developed and can be buggy at times, USB is a safe bet. thank you so much for the wishes, they are much appreciated!

[@drvamsijagannath451]

Thanks boss for the video. I could update using the 1st method.

[@shahmeerathar]

I'm glad I could be of help! enjoy the wireless connectivity haha

[@Mei-Thingthu]

Thank you alot... Regards from Mizoram. God bless

[@shahmeerathar]

you're welcome sir! i'm glad this helped you

[@its_unknown6177]

Bro bhot bhot thnk u yrr , aj suba ka pagl ho gya huu try kr kr ke pr abi mujhe pta lga ke mene kaha glti ki hai mene blue tooth connection me smart play pro wale option ko enable ni tha kia abb kal subah hote hi apka method try karunga , once again thnk u bhai itni detailed video bnaneke liye ❤️❤️❤️❤️

[@shahmeerathar]

arre bhai shukriya

[@YourCoddingBuddy]

Really helpful video thanks a lot

[@shahmeerathar]

glad it helped!

[@WayfarerVinay]

Oh bhaishab! Kya Bhadiya Content Bana Diya apne! I have binge watched all your videos in the night like a Netflix web series. Seriously, I have Started with your MID step by step video and then completed watching all the videos. Really amazing content, Making the life of all the new Brezza owners easy and Also helping others who are in the 'Q' of purchasing like me! 😊 Booked ZXi+ Manual DT silver & Black.. will get delivered in less than a month. And also got to know from the comments that you have undergone a surgery and in medical treatment these days! Hope you are fine now and it's not anything Major. Hoping for a speedy recovery... Bounce back soon. Keep doing quality Content.

[@shahmeerathar]

i cannot thank you enough for these kind and motivating words ❤️. I am really grateful for the feedback. you've booked the colour of my choice haha, lack of delivery guarantee made me switch to the evergreen white but roof wrap kind of did the job. yes i was hospitalized on the 2nd, still here, recovery is slow but surely I'll bounce back and continue the channel thanks to support from people like you :)

[@gautamkarde5301]

Thanks a lots so helpful video👍🏻

[@shahmeerathar]

you're welcome, i'm glad it helped!

[@RiturajChhibber]

Thanks, bro. With your guidance, I was able to update the software in my Brezza ZXI Plus. It took little time. However, I didn't face any chalange. It was a smooth process, and I did it using my phone. Thanks again, and cheers !

[@shahmeerathar]

glad to know that, you're welcome! enjoy the new features

[@niks0112]

Was your version 66TA?, I Have 66TA so I downloaded 66TA.05 but nothing happened, when I click on software update, it says no valid update file p. I am not sure what I am doing wrong

[@gigumjumbadak6780]

​@@shahmeerathar bhai.. i couldn't update my Brezza ZXI+ by using the first method. As the wifi and internet didn't work well with each other, download not happening. Do you have any idea how to use the data while connected to WiFi?

[@shahmeerathar]

once the update has been detected in the app, disconnect from Brezza's WiFi and connect to your internet WiFi to download the update. waiting for the update to be detected in the app is the main struggle. I would even suggest that you use method 2 since it has a lower chance of failing

[@pilotpawanc]

One of the best videos

[@shahmeerathar]

damn thank you!

[@AceHimanshu]

Awesome bhai! Thanks for good news!

[@shahmeerathar]

you're welcome! update was released on 10th Dec officially, i was a bit late 😅

[@arpitpatel1326]

Thanks very informative video👍

[@shahmeerathar]

thank you!

[@jampal003]

Great work 👌 thanks a lot

[@shahmeerathar]

you're welcome!

[@mkVats-1120]

It's very nice update by Suzuki....... I was done it with your guidance.....2nd method is very fine to do it......2nd method is safe and reliable......USB method 👍

[@shahmeerathar]

glad i could be of help! very true, even i prefer 2nd method

[@shahmeerathar]

@Nallachi Rajesh apologies for the delayed response you can skip the .bin and .json files, just place the .pkg file in the USB and update the system

[@shahmeerathar]

@Nallachi Rajesh mileage fluctuates depending on various conditions, will cover it in a video soon DRLs cannot be blinked, they appear to blink in recordings because of the frame rate of the cameras

[@barathkumark2]

I tried following the same steps method 2 but i am getting download failed and the update fails. Any idea? I tried on baleno zeta by the way

[@shahmeerathar]

@@barathkumark2 the update was launched for baleno recently please ensure that the software version you select in the website is the correct one, also format the pen-drive to FAT32 system from NTFS, ensure that you drop the mentioned files in the correct format (you can skip .bin and .json files) if it doesn't work, maybe try with a new usb

[@BhanuKumar-wf9fv]

Thanks for such a detailed video on this new feature. One question here - which is the best way to use navigation on the infotainment system. Is it Android auto/Carplay or Navimaps which comes along with the Samrtplay studio app?

[@shahmeerathar]

hey, its a matter of personal choice, whichever app feels better to use, more functional, you should use that i believe both of the maps should be compatible with the infotainment system because they have been developed for that purpose

[@BhanuKumar-wf9fv]

@@shahmeerathar : Thanks for your revert.Actually I observed a glitch while I was driving yesterday. Since I have iphone with me so that naturally connects with Apple maps in carplay. And while navigating to a destination, route shown was different when I compared that with the Google maps application manually over the phone.So compatibility wise no issues, but apparently I rely more on the Google maps but haven't used navimaps earlier and hence was wondering to choose between the two.

[@BhanuKumar-wf9fv]

Also one more question here - I received my vehicle last week, but am still unable to login into the Smart Play Studio app as it says mobile number does not match with VIN. So do you have any idea that how long does it take in this process?

[@shahmeerathar]

@@BhanuKumar-wf9fv i have never used Carplay personally but i have a feeling Google maps are more optimised for Indian roads (but not better than asking locals for directions haha) as for the phone number registration I am afraid I have no clue about that, SmartPlay Pro or SmartPlay Pro Sync apps for ZXI didn't require any registered mobile numbers. I suggest you contact your dealership and get the issue sorted with the concerned technician asap

[@rajatjinda]

Hi, thanks for this. I understand that the baleno has got a similar update also. Do you know where i can download the software for glanza.

[@shahmeerathar]

unfortunately i am not aware of any announcements made by Toyota regarding any such OTA update, but you could try entering your software version in the website linked in the description or if Toyota has a dedicated website for its Infotainment systems, you could check on that. Maruti's website was mentioned in the Infotainment System User Manual and also in the Quick-Guide Pop-up in the Infotainment System

[@chetanagarwal15]

Hello I want to update my Ciaz Alpha 1.5 display so which version should I select can you please tell?

[@shahmeerathar]

hey, so i do not have access to a Ciaz so unfortunately i cannot confirm the code for you but the system code can be found in the settings of the infotainment system just like i have shown, hope it helps

[@offbeatbang7866]

Hi Shahmeer, thanks for the video, I am trying to update in my Brezza ZXI after inserting the USB can't see any prompt on screen even waiting for 6-7 minutes. Is something wrong ?

[@shahmeerathar]

hello, if you've already formatted the USB and it is in FAT32 file system, then i believe there is an issue with the USB, i suggest you try with a different pen drive, preferably a new one

[@querynext]

I have SMARTPLAY pro in xl6 - is wifi auto connect feature enabled for XL6?

[@shahmeerathar]

hello, unfortunately i am not acquainted with XL6 but since you've mentioned it has the SmartPlay Pro i am sure it will have the WiFi connectivity

[@dcc38egan]

today i am going to update my brezza zxi plus, hopefully the 2nd idea will work :D

[@shahmeerathar]

good luck! also, please go through the comments once as people have added valuable information that solves issues arising during the process

[@dcc38egan]

@@shahmeerathar yes bro i already did it

[@sayhi2sanju]

Thanks

[@shahmeerathar]

glad it helped!

[@sentinel_legend186]

Is there any way where i can watch KZbin or prime or any video saved on phone onto smartplay pro + system ?

[@shahmeerathar]

doesn't Android auto allow you to watch such content?

[@shashankprince4317]

Bhai new brezza ka left side judgments ke liye centre point bta skte ho bhai

[@shahmeerathar]

maine kabhi aise notice nahi kara, judgement naturally ayi hai mujhe humesha, but i think bonnet ka sabse door wala end, left headlight ke upar jo corner ata hai, usse idea hoga

[@wajahathussain7955]

I'm unable to register on smartplay pro

[@mksindia123]

Sir, Will it work on 2021 December Vitara Breeza Model also?

[@shahmeerathar]

the update is available for SmartPlay Pro/Pro+ infotainment systems on the 2022 Brezza and Baleno

[@sandeshjavagal5297]

How about 2020 model is there any update like this?

[@shahmeerathar]

i doubt this is for older models, as far as i know, it is only available for gen-2 brezzas but you can check-in your system version in the linked website to confirm on your end

[@RishabhGupta93]

Is this update available for xl6 as well?

[@shahmeerathar]

as far as i am aware, the update has been rolled out for brezza followed by the baleno it hasn't been announced for the xl6 yet, hopefully it will be announced for xl6 soon as well considering it is equipped with the same infotainment system

[@traviscook7514]

That is a very informative video. Can you tell me 55T1 is missing pkg file. also open source license is missing.

[@traviscook7514]

sorry I ment Open Source download is empty .zip

[@shahmeerathar]

it means that the update is not available for that infotainment system

[@elnino8985]

What app to use for updating software in Glanza??

[@shahmeerathar]

no updates for Galnza yet

[@dileepk9072]

Hi , i just booked Zxi. So as a beginner i understand that no need to connect via cable for maps, it's going wireless after this update, isn't? Please reply

[@shahmeerathar]

indeed, this update enables wireless android auto and apple carplay in your infotainment system

[@madhavamurthy8166]

@@shahmeerathar Please note that not all phones will work with wireless Android Auto. There are 3 important points (1) Better to have Android 10 and above on phone (2) Phone should connect thru Bluetooth to infotainment system (3) Phone should be capable of connecting to Wifi in 5GHz band (Not all phones have this feature and only latest phones have this)

[@Ashishkumar-dn6sw]

I have a zxi too what is the mileage you getting out of it ?

[@shahmeerathar]

totally depends on the driving style and traffic conditions, i have managed to get anywhere between 14-18 kmpl in city and around 20 kmpl on highways at 90-100 speeds

[@shashankchauhan8587]

hey, just got brezza zxi and been using android auto and its working well. i have to say "hey google" everytime for voice commands on android auto which becomes a bother after sometime. i tried the steering wheel voice command button but it activates the system's inbuilt voice assistant rather than google assistant on android auto. any way i can use the steering mounted voice command button in android auto for google assistant???

[@shahmeerathar]

hey shashank, apologies for such a late response. I believe the button is hard-wired for the inbuilt system and cannot be re-programmed for the android auto/ apple carplay, well definitely not in a straightforward manner

[@shashankchauhan8587]

@@shahmeerathar appreciate the reply mate 👍thanks for the helpful videos

[@shahmeerathar]

@@shashankchauhan8587 i am glad you found them helpful, hope you enjoy your car well!

[@playedugame]

Hi brother thanks you for sharing. I have same car but I have issue. When i will resive call and I cut the phone then music not auto playing in car. Music playing in mobile only. Then I need to discunnect phone then re connect then it's work. You have same issue or not

[@shahmeerathar]

try factory resetting the system and then re-establishing the connections

[@playedugame]

@@shahmeerathar that's also not working. do you have same issue or not

[@BHARATKUMAR-hi8xm]

Thanks for this, I owned zxi also, let me share my experience, firstly smartstudio sync app showed me baleno instead of brezza 😂, after update it got corrected, then i never connect that rca app for vehicle information let me tell you that smartplay studio app for vehicle information is not connecting after the update so if you know anything then please reply.

[@shahmeerathar]

i couldn't understand your issue clearly but i suggest you: 1. delete both applications from your phone and reinstall them 2. factory reset your infotainment system in the car from the settings and then try a fresh reconnection between phone and infotainment system i have a video on how to pair phone if you need help: kzbin.info/www/bejne/q3rWeJ6IitSKf7s

[@vijaykrishnan4151]

Yes smartplay studio never worked in zxi before and after the update. For me it says Vin# and mobile number not matching. I wanted this app to work for navimap.

[@shahmeerathar]

@@vijaykrishnan4151 yes I've noticed a couple of people facing the same issue for either the detected car being incorrect or the registered number being invalid, unfortunately i have been unable to find a solution, i believe it is some issue on MSIL's server end

[@shivmishra5266]

I'm facing the same issue it's showing me Baleno detected instead of Brezza

[@shahmeerathar]

@@shivmishra5266 don't worry, go ahead with the update, its a bug in the application.

[@vijjurahwani2796]

Is the update available for ertiga zxi +

[@shahmeerathar]

i dont think so but do check your system version code in the linked website to be sure

[@prabhav4981]

Bro, is this not available in Bangalore?

[@shahmeerathar]

what makes you say that? Its an over the air update accessible pan-India, one of the viewers commented from the Andamans

[@charligarciatorres]

I am from Mexico, I have the baleno 2022 with the 55T2 infotainment and when I download the download file it does not give me any .pkg file, only the two .json and .bin files, when connected to the car it does not detect the update.

[@shahmeerathar]

hello, i checked the code with the website and yes, the .pkg file is not available i believe it is only available for model codes 55T0 and 55TA unfortunately

[@albertsuresh3696]

Unable to connect smart play pro sync in my iPhone. What to do now?

[@shahmeerathar]

i have no experience with IOS so i won't be able to guide you unfortunately. The app is pretty buggy, it could take a couple of tries.

[@MohanKumar-zh7dm]

How long it takes to download the software & installation..i tried using the first option..download s completed and i transfer the file to HU..but installation taking 15+min and still going-on

[@shahmeerathar]

installation can take anywhere between 10-20 minutes, took me numerous tries with both methods to successfully update just have patience, if it fails, factory reset the HU, reset all connections and try again

[@ninjasamal664]

Turn by turn navigation is not working on Apple carplay though anyone else having this issue ?

[@mr.h.k.g._]

Bro do we need to start the engine, inorder to update?

[@shahmeerathar]

well, technically no, the engine need not be running, just the infotainment system has to be switched on, but practically speaking, i suggest you keep the car running to avoid any battery drain as the process can take anywhere between 15-30 minutes (excluding failed attempts)

[@BHARATKUMAR-hi8xm]

Make a video on turn by turn navigation for MID

[@shahmeerathar]

will create a demonstration video soon

[@Ikchaitanya0007]

For iPhone users can u post video

[@shahmeerathar]

hello, unfortunately i don't have access to an IOS device but the procedure should be similar

[@suneeshkurungottillam92]

Is it applicable to new Baleno 2022?

[@shahmeerathar]

yessir it is, provided the variant has either SmartPlay Pro/Pro+ Infotainment System, i.e. Alpha and Zeta variants if i recall correctly

[@peacenik6991]

Man, the video was amazing. I just tried it with my Baleno Zeta that comes with SmartPlay Pro. It worked like a charm, faced no problem.I had no idea about these updates until I saw your video.

[@shahmeerathar]

its surprising how ineffective maruti's communication is, given the fact that these updates can be a MAJOR boost for their sales and credibility against competiton glad the video was helpful!

[@siddhantshitole9219]

Which method did you use to update?

[@siddhantshitole9219]

I'm not able to connect to the wifi of car and therefore also able to use Smartplay pro sync app

[@peacenik6991]

​@@siddhantshitole9219I used the USB method. The phone method is tedious. the sync software doesn't even recognise the car, I used the USB method to avoid any problems. The phone method has problems because the server is sluggish, which is why I had to try at least five times just to download the file from the website. Before updating, I just deleted all of the connections. It took barely approximately 15 minutes.

[@siddhantshitole9219]

@@peacenik6991 So on phone you were able to download the file and all using the app. I'm not even able to connect the app with car and wifi

[@shreetraders4169]

I'm getting (001-0003 error) while upgrading . BREZZA zxi model kindly help me

[@shahmeerathar]

hello, unfortunately I do not have access to error code readings. All i can adjust is that you attempt using method 2: USB to update

[@sanjeevpathak6644]

Mr. Shahmeer, thanks a lot for your step by step update explanation. But I have tried updating its not happening. Please kind enough to answer me that, do I have to keep my brezza engine ignition on while update is in progress???

[@shahmeerathar]

what problem are you facing exactly? and yes it is advised to keep the car engine running while updating the system

[@sanjeevpathak6644]

​@@shahmeerathar Sir, everything goes accordingly from file trnafer to downloading of the software to the main unit but after 10/15 minutes the next window comes up blank and an error code appear saying downloading unsuccessful please try again.

[@shahmeerathar]

@@sanjeevpathak6644 unfortunately it is impossible for me identify the root cause because of the error code, however i can suggest some basic trouble shooting try with a usb, if you are already trying with a usb then try with a different one, preferably a new one with over 8gbs of storage space, also ensure it is in FAT32 file system factory reset your infotainment system a couple of times before attempting to update and after each failed attempt, reset the system again you could try the first method using the apps but its a bit tricky and has a higher chance of errors if nothing works then you should contact your technician at your authorised service centre

[@sanjeevpathak6644]

​@@shahmeerathar Thank you Sir, let me attempt this time with a factory reset and I have tried 3 new usb with storage space of 8/16/32 but nothing works. Moreover, technician here in Guwahati they wasted my 3 valuable days and my precious gas during this process at 3 different maruti workshop 😢.

[@shahmeerathar]

that is quite unfortunate, i suggest you try with method 1 as long as a stable internet connection is available

[@sainarasimhareddy]

Can we do it in 2020 breeza ?

[@shahmeerathar]

unfortunately no, the update is only available for the new infotainment systems

[@deepumadampilly]

Brilliant video. USB option is much easier. Upgrade went without a hitch

[@shahmeerathar]

thank you! i am glad the video proved to be helpful

[@hardiksharma6864]

hello shahmeer i have done the update on my brezza from mobile update . update is also done but android auto is not showing .

[@shahmeerathar]

sorry for delayed response, currently undergoing a surgery Android auto should pop-up once you factory reset the infotainment system and have wireless Android auto enabled on your phone in the settings

[@callrathna]

Didn't work with wireless, the smart play sync app is buggy. finally did it via usb.

[@shahmeerathar]

yes, the apps are really un-optimised, there's so much potential if companies had dedicated competent app development and management teams

[@revinomisquitta6191]

I have added it on the usb. And the usb get detected with the update but it dosent higlight the yes button

[@shahmeerathar]

it probably has something to do with the update file version not being the correct one. i suggest you format the USB and set it to FAT32 and reinstall the update file from the website while double-checking the update version.

[@globalking367]

Bro why u creating .bin and .json file..? Is it ok to install only package file downloaded from the website?

[@shahmeerathar]

instructions from maruti stated that .json and .bin files should be there in the pen-drive with the .pkg file however people have updated with just the .pkg file

[@globalking367]

@@shahmeerathar ok tks bro👍

[@ashishmangal2862]

My USB is not getting detected at all. I have zxi, i did all those steps you have mentioned for USB. Could you please help

[@shahmeerathar]

hey, please ensure that: 1. USB is in good condition and format it before backing up any important data 2. its atleast 8gb or more 3. all 3 files are present directly in the USB (not in any folder) in their respective format .pkg .bin and .json, it should not be the .zip file 4. factory reset the infotainment system from the settings 5. if USB is detected but update doesn't start, try selecting the 'Software Update' option in settings 6. if USB doesn't get detected at all (it takes some time for me) then try with a different USB, maybe a new one? if this still doesn't work, give the SmartPlay Pro Sync method a try, or contact your technician at the authorised service center

[@ashishmangal2862]

@@shahmeerathar hey thanks for update I think if USB file system type is FAT32 it’s getting detected now. I carefully saw in your videos too. It was FAT32. Earlier I was doing in NTFS that didn’t work. FAT WORKS!!

[@shahmeerathar]

@Ashish Mangal thank you so much for informing me, this may resolve the query of another user i believe

[@AshishGupta-hk3fy]

Use FAT32 while formating your pendrive.

[@shaurayrastogi6932]

Sir what was the total time it took with USB?

[@shahmeerathar]

will take anywhere between 15-30 minutes for the entire process. also, i suggest you go through the comments, useful information has been exchanged

[@BhanuKumar-wf9fv]

Hi bro - I tried doing the same using USB yesterday, but nothing was getting detected in the infotainment system. Any idea what might be the issue here? Do I need to format my USB in any specific file system for the same, I did it in the NTFS file system.

[@shahmeerathar]

no, NTFS worked fine for me, do you mind mentioning your Brezza's variant?

[@BhanuKumar-wf9fv]

@@shahmeerathar : sure, It's ZXI+

[@shahmeerathar]

> make sure the code for update on the website is 66TA > use a pendrive of atleast 8gb or higher configuration > format the pendrive and drag and drop the 3 files mentioned in the video directly into the pendrive without creating any folders > FACTORY RESET the infotainment system from the settings > if the update does not get triggered automatically, try tapping on the Software Updates option in the infotainment system settings > if it still doesn't recognize the pendrive, maybe try with a different pendrive if nothing works then i suggest you contact the authorized technician at your service center.

[@rajatk1043]

Same problem with me zxi+ Nothing detect

[@shahmeerathar]

@@rajatk1043 hey, you could try the steps I've mentioned above to resolve the issue

[@oblivion_007]

Show the turn by turn nav test in instrument cluster and hud

[@shahmeerathar]

sure, will prepare a demonstration video soon

[@oblivion_007]

@@shahmeerathar 👍🏽

[@funsinner]

So I connected by Baleno with the Smartplay pro Sync app, but the updates tab is not activated i,e update is not there only. Not sure what I am doing wrong.

[@shahmeerathar]

happened with me as well, that was because my internet connection was pretty weak down in the parking, it took quite some time to detect the update

[@funsinner]

@@shahmeerathar so you are saying that I should keep the app open and wait for it to detect? If so, then how much time because I did wait for 5 mins.

[@shahmeerathar]

@@funsinner well that's what worked for me, try reinstalling the app and maybe move the car to an area where the mobile data works better

[@gowthamd896]

When I download it takes long time . What can I do ??

[@shahmeerathar]

once download is detected via mobile data, connect to your Wifi and download the update, it should download faster

[@rudrist]

But how can it possible mobile data and Wi-Fi simultaneously work .. I tried but it couldn’t Kindly help

[@shahmeerathar]

the Wi-Fi is just a wireless connection, it is not internet-enabled. ideally the mobile data should work

[@Pankaj_lawaniya_vlogs]

Unable ro connect 14 pro iphone

[@shahmeerathar]

unfortunately I don't have access to any IOS device, what problem are you having exactly? can't connect before or after update?

[@vikramgupta2899]

Is working on andriod 10

[@shahmeerathar]

on a samsung device?

[@rajeshpandey9887]

Pls make a video on how to connect wirelessly apple car play.

[@shahmeerathar]

unfortunately I do not have access to an ios device

[@MoriTushar]

Sir purani brezza zxi plus he usme bhi hoskta he?

[@Rahul_Nikam]

January 2021 ZXI + me hoga kya update?

[@shahmeerathar]

mujhe lagta toh nahi ke purane models ke liye update hoga but ek baar software version ke through website pe check karlo

[@Rahul_Nikam]

@@shahmeerathar ok thank you

[@devjitbora4815]

This is zxi or zxi plus?

[@shahmeerathar]

i have a zxi variant, the update is available for both zxi and zxi+

[@ayushshorts111]

thanks bro mara ho ga zxi plus ma 1 method sa par 2 hour laga

[@shahmeerathar]

2 hours? damn well its done now, enjoy the update

[@Lovekush0008]

Vxi me ho jayega kay

[@shahmeerathar]

nahi

[@PARTHPATEL-wp4mp]

Send me link of same video for tata nexon

[@shahmeerathar]

the update was pushed by Maruti Suzuki, i'm afraid it won't work on Tata cars.

[@PARTHPATEL-wp4mp]

@@shahmeerathar ok np

[@shubhamsoni221]

Vxi wale me jo hai usme bhi

[@shahmeerathar]

system version daal ke check karlo website pe

[@AmitSharma-fe2xt]

Vxi m?

[@shahmeerathar]

software version check karlo infotainment system mein aur phir website pe daal ke dekh lo update hoga ya nahi

[@Venkyrvc]

Iphone kaise add karnahe bhai

[@shahmeerathar]

same tareeke se nahi ho raha?

[@pushpendratiwari1032]

'Usb connected' message is coming but unfortunately software update is not deducted. Model ZXI

[@shahmeerathar]

Ensure that you have used the correct system version code to download the update. The pen drive should be formatted to FAT32 file system, it should NOT have any folders, the update file (.pkg) should be extracted from the .zip file and dropped into the root folder of the USB.

[@pushpendratiwari1032]

​@@shahmeerathar Thanks, Actually problem was in my pen drive.

[@shahmeerathar]

@@pushpendratiwari1032 oh hahaa, i forgot to mention that even though i did to others, sorry :p

[@animeshchandrakar6779]

Bhai time kitna legi 1 hr or more

[@shahmeerathar]

under 30 minutes ideally

[@niks0112]

My mobile data do not work when I connect to my Brezza car, any idea what setting is required?

[@shahmeerathar]

hey, ideally it should work because the Wi-Fi connectivity is not internet-enabled

[@niks0112]

@@shahmeerathar I tried USB method but car say no valid updated file

[@shahmeerathar]

@@niks0112 you must have the correct valid update file in the USB, check your infotainment system's software version, download the corresponding update file from the linked website, ensure that you have a clean pendrive and then transfer the extracted .pkg file (NOT the .zip) into the pendrive it should work just fine as long as the CORRECT file corresponding to the correct software version is in the USB

[@shahmeerathar]

@@niks0112 what variant do you have of the brezza?

[@niks0112]

@@shahmeerathar Steps were following in my zxi plus with current version 66TA.04 1) downloaded 66TA version update 2) format PEN DRIVE 3) copied upgrade.pkg to pen drive 4) inserted pen drive to car USB 5) Nothing happened 6) click on software update option in car infotainment system, error no valid file found Note: I tried with and without empty bin and json files, Just to give a try I even tried with zip (lol) I am not sure what I am doing wrong

[@shahmeerathar]

Method 2: Ensure that the USB is in FAT32 and not NTFS file system People facing the issue of Baleno being detected instead of Brezza in SmartPlay Pro Sync app, do not worry, its a bug, you can still update the system as long as the VIN number is being displayed correctly.

[@sinshoe1548]

Update done: my phone is realme 3pro. I don't have smartplay app, phone bas bluetooth connection le raha android auto kar ke kuch bhi pop up nhi ho raha jese aapme hua

[@shahmeerathar]

@@sinshoe1548 if the system version has updated to .005, factory reset the system once. also, in your phone settings, search Android Auto and ensure Wireless Android Auto is enabled, then reconnect the phone via Bluetooth

[@sinshoe1548]

@@shahmeerathar i found the issue, android auto wireless is compatible with Android 11 for phones other than samsung. I updated my phone, will try again with my phone. I connected another phone which had android 11 and that worked.

[@shahmeerathar]

@@sinshoe1548 good to know! thank you for informing

[@pilotpawanc]

I updated the system. It got updated in the first go. I have Android 11 but still i am not able to connect. My phone is connected via Bluetooth but didn't work. Then i tried switching ON wifi only, then too nothing. Any ideas?

[@shivanshjaiswalvlog7348]

Bro mere bus driver side se music sound aara hai Aisa kyu ?

[@shahmeerathar]

settings mein sound bias check karo, make sure its centered better yet, factory reset the system nahi hota fix to service center leke jana padega

[@kripalsinghbisht7496]

Koi bhi plz lino bhej do download ka...play store pe nhi mil rha h ye wala

[@shahmeerathar]

bhai description mein di huyi hai link, check to karo

[@arijitdutta07]

Bro system is restarting again and again and after software update restart what to do now

[@shahmeerathar]

some more details would be helpful

[@arijitdutta07]

@@shahmeerathar I tried to update the software with method1 and everything went right then after jab software updating aa rha tha infotainment system mei tab gaadi galti se merese band ho gayi tab se jab push start on kar rha hu tab se infotainment system mei Suzuki ka symbol aa ke baar baar restart ho raha hai

[@arijitdutta07]

@@shahmeerathar also infotainment system is now on reboot loop

[@shahmeerathar]

@@arijitdutta07 i believe OS mein issue a gaye, hard reset karna padega at the service center. contact your concerned technician at the earliest. ek baar settings ke through factory reset karke dekho, if you get some time before it reboots.

[@ambujchaudhary241]

Invalid vehicle details received.. every time I try to connect smartplay pro sync me ye error aa rha h

[@shahmeerathar]

mujhe bhi ye issue aya tha because i was skipping some step. please ensure you follow each step as i have shown, assuming you have a zxi or zxi+

[@mukeshsgupta]

Same for me bro. Not able to proceed

[@shahmeerathar]

@@mukeshsgupta delete the Bluetooth connection and re-establish it, ensure that the 4th option (SmartPlay Pro Sync) is enabled, then connect with car WiFi follow the steps in the same order as shown because the app is buggy

[@polardgamer5066]

"Invalid Vehicle Details Received" this error is coming while syncing

[@shahmeerathar]

it'll take multiple tries, ensure that you follow the steps in the exact order because its pretty easy to mess up, speaking from experience

[@polardgamer5066]

@@shahmeerathar tried over 5 times

[@7wik69]

I’v done each and every step correctly still it’s not showing any update in the app 😢

[@shahmeerathar]

the app is slow and the communication between the servers and your phone is laggy as well. re-install the app and try to reconnect it, also ensure that the internet connection is stable and high-speed because it will take time to detect. took me a couple of tried before the update popped up in the app.

[@7wik69]

@@shahmeerathar Okiee thanks a lot 🫶🏻

[@shahmeerathar]

@@7wik69 no worries man, just go through the comments once, a couple of them had the same issue

[@shahbaazsabbir5791]

Mobile phone ka android version kitna hona parega ??? Mera 10 version hai chalega????

[@shahmeerathar]

hello, Android 10 nahi chalega most probably, another user had a similar issue and unka chal gaya with Android 11 phone

[@shahbaazsabbir5791]

@@shahmeerathar haan ji mujhe yahi doubt tha thank you.

[@shahmeerathar]

@@shahbaazsabbir5791 if it works, then drop a reply please

[@shahbaazsabbir5791]

@@shahmeerathar ok sure

[@dineshsiwach2898]

Thanxs bro ph se to nahi hua but usb se ho gaya

[@shahmeerathar]

no worries, haan USB wala option better hai

[@dineshsiwach2898]

@@shahmeerathar bhai kya KZbin bhi chal sakta hai kya

[@shahmeerathar]

maine try nahi kara, mere android auto mein visible nahi tha youtube, will look into it

[@vsvvv22]

For me it shows 420Mb and my car is brezza but in app it shows baleno

[@shahmeerathar]

try factory resetting the Infotainment system, reinstalling the app, re-establishing all connections (Bluetooth and WiFi) the app sure is buggy but i cannot figure out why it would misidentify the car, given it sources the VIN number from the servers

[@vsvvv22]

@@shahmeerathar I tried through pendrive..it works...

[@shahmeerathar]

@@vsvvv22 good to know

[@princechoudhary2657]

Brother i have zxi mera update stuck hora h M moblie se kra hu File transfer hojati h mobile se , even mobile is still conceted But car screen par bss downloading in progress pl do not disconnect likha ata mne kafi wait kia but yehi likha ata rhta h iske age nhi hora h Ye kite time bad likha ata h that all function will be unavailable until software update is completed Bla bla bla Kya dikt h ? Kita wait krna pdta h bro...

[@shahmeerathar]

estimate lelo aap 15 minutes for file transfer (from phone to unit) and 15 minutes for actual installation on an average try resetting all connections (Bluetooth and WiFi) and reinstalling the update agar phir bhi nahi hota to USB se karlo better rahega

[@princechoudhary2657]

@@shahmeerathar ok brother morning me try krta hu Thanks fir quick reply even in late night Appreciate it bro... 😍

[@shahmeerathar]

@@princechoudhary2657 arre no worries bhai :) ho jaaye to batana

[@princechoudhary2657]

Brother thanks it will help me I try pendrive method and then easily my update done. It take time about 10mints and then 10mints but my update is done Again thanks brother... 😍

[@shahmeerathar]

@@princechoudhary2657 good to know! you're welcome

[@kripalsinghbisht7496]

Iska link seso sir

[@shahmeerathar]

description mein hai link

[@sarthakkesarwani7303]

Just follow the simple steps described in this video and you'll get the new update of wireless Android auto in your new BREZZA 2022. POV: follow the second step it's better than installing through your phone. I'M HAPPY 😌😌

[@shahmeerathar]

yeah installing via USB is slightly more convenient than via SmartPlay Pro Sync app

[@shahbaazsabbir5791]

Mera update ho gaya but android auto ka logo nahi araha without USB cable

[@shahmeerathar]

system to factory reset karke restart karo gaadi ko, a jaana chahiye

[@shahbaazsabbir5791]

@@shahmeerathar mene usb files delete kiya tha format nhi kiya isilye sayad mera Android auto ka logo nahi aya without USB connection.

[@shahmeerathar]

@@shahbaazsabbir5791 Android 11 and above try karo

[@mgvlogs6623]

Baleno delta me hoga 🙄🙄🙄

[@shahmeerathar]

infotainment system kaunsa hai?

[@KritarthMalviya]

Smartplay Pro sync app is very bad 👎 instead you can use a pendrive to update the software. Also, the wireless android auto/ apple car play update is applicable for Baleno zeta and Alpha cars with versions like 55T0, 55TA, 66T0 etc

[@sentinel_legend186]

Are bhai meri brezza zxi+ thi or app me baleno dikha rha tha 😂😂

[@shahmeerathar]

Haan vo app ka issue hai, as long as VIN correct hai update ho jayega