Perkins Diesel Engine Build Pt 3 Cylinder Head Install

[@bobgwinn5091]

cool

[@briansmobile1]

Bob, you're a mover and a shaker! That's cool.

[@davidd6737]

literally thousansds of peiceses tearing an engine like this down, alot of work, plus the knowledge and skill set mechanics have to know, its a hard industry, much respect

[@dakotaintercontinental4558]

Hello Brian, Thanks for the series on the Perkins. I have a 50hp in my 43' sailing home and your videos have made a huge difference in my confidence. I live north of you, 100 miles, but by next year will be full time on the 43'. I have 4 daughters and your comments regarding daughters is spot on!! Thank you again and hope to see your finished "man cave" before moving to salt full time. 2020 now and looking forward to 2022.

[@TheSoupdragon1968]

Enjoying your series on the Perkins engine. We had Chrysler Europe vans at work , they had Perkins phaser 6 cylinder engines... Amazing things super smooth and powerful, for a diesel.

[@airbornelocksmith]

Brian when we work on Roter systems on helicopters we number the bolts so you can just count and go in stead of having to look at the picture all the time. So next time try that with a marker will make it much faster.

[@torifan1976]

Been watching your channel for years, and I have to say your editing, and production skills have come a long way. Great series Brian, love it.

[@briansmobile1]

Thanks Ben- that's really cool of you to say that!

[@Stoparts]

Nice work man 👏

[@bfields1448]

Perkins engines are little jewels.

[@anthonythompson69]

With a bigger bearing clearance and the right oil, these engines could last "forever"!😊

[@whatnextsunshine3046]

Like your poise... even me starts to understand something bout auto repairs ;-))

[@babykilla1231]

TECHNICALLY you’re supposed to do that extra 180 degree turn on the head bolts all in one sweep (good luck with that 😉) nice video, I work at a Perkins dealership, we have 4 of these engines in the shop right now in various stages of re-building.

[@DrFiero]

For those crazy tight bolts, stand on the engine stand. Saves the engine twisting around on you. Can't tell if you're doing it or not...more for any newbie wrenchers out there.

[@briansmobile1]

Or just stand through it.

[@coldblazinfire]

I have a 1992 Bobcat 943 with the 4.236 Perkins engine and the Bobcat repair manual says that there are dowel pins that go between the block and head. I do not see any place where there is countersunk holes in the head or block for dowel pins. I appreciate your video it gives us the answer about the dowel pins. Thank You, excellent videos on the Perkins engine.

[@Garry.the.courier]

tight nuts .. takes me right back to my youth!

[@AP9311]

Cool video!! Cool torque job. Hope you keep cool lol!

[@AntonioClaudioMichael]

Definitely heard the compression building

[@briansmobile1]

cool

[@jasonbubley9427]

Do you use oil in the bearings typically when using the plastigauge?

[@SeanBZA]

Did you measure the head bolt lengths to make sure they were still within spec before reusing them? They do stretch a lot in use, IIRC the spec on some is 2mm, past that you replace all with new, even if some are not past the spec. The old bolts however have a lot of uses on less critical parts, I reused a lot of head bolts to hold trailers together, they were a lot better than the original non rated ones that were there, even though I did have to paint them before and after installing so they would not rust. even welded one head to a plate to make a spare wheel mounting for the trailer that did not have one, and drilled the end for a split pin to hold the nut in place. Later on I changed it out for a tank lid bolt and wing nut, I got for free, because that was stainless steel and looked shiny.

[@briansmobile1]

Cool. Stainless tank lid bolts and wing nuts are the coolest!

[@wyattoneable]

That head gasket could be easily reversed, you provided a good tip for correct installation. Your editing was spot on which makes viewing flow nicely. See you on the next video.

[@briansmobile1]

OMG! Thanks Wyatt!

[@piotrciach1126]

You can also divide 180 degrees into 3 stages of 60 degrees. This allows for greater intuition and control. :) it's COOL

[@aussiebloke609]

Re: the head gasket - an oval is basically an ellipse. That shape in the gasket is correctly called a _stadium,_ as it has straight, parallel sides (although in common speech, they terms are often used interchangeably.) :-) And yes, I can be a bit of a pedant - but _you_ asked! :-D

[@AntonioClaudioMichael]

Great video

[@briansmobile1]

You're the man Antonio! Thanks for your support!

[@kiiiisu]

cool, but u should put oil on washer part on head stud too! edit: lol i was too quick, good job

[@macro820]

I agree with others about the stretched bolts. Sometimes they have different specs for re-used bolts I believe

[@tamar5261]

My 3 cylinder Perkins wrecked itself when the injector thing in the head fell out and wrecked number 3 piston, con rod and cylinder. I bought a replacement engine and now a year later I think the head gasket has blown 😮

[@FourthWayRanch]

Hes using what they call the non retorque method. How do you know you can do it with that gasket?

[@mrb1864]

I let my heads sit overnight to settle and final torque next day, you should be able get the extra 10-20deg you running short . You want get a digital wremch with angular function, man it makes life easy plus see the ft/lb readings from the angular setting and can see how even they go down . These perkins lumps are cool 4 pots .

[@briansmobile1]

I'll have to try that.

[@esmailalfahim2068]

Thanks for the great job

[@willhikearizona]

Looks like a good workout. Also what did I miss, with all the comments about "cool"?

[@klc317]

Geez taking those bolts around the 180 looks nerve wracking. Was hoping not the hear a "snap"!

[@strongmonty]

LOVE YOUR SERIES!!! You've been a big help. Our connecting rod caps had all of their two letter codes (either "CA" or "BX") facing FWD and our lower end had not been opened up since it left the factory in the UK. I'm wondering if someone switched that one that was as you stated "concerning" in the last "rushed" rebuild. That said, had I been you, I probably would have put it back in the way it came out as well. Now that you have this info though, would you think it better to put it back in the way it came out or, do it the way that ours was?...my thought is a call to Perkins but I don't think that would get anywhere.

[@SPLEclipse]

The first time you torque by feel and break one of those bolts off it changes the way you do things for life, lol.

[@Jengoboys603]

I dunno i just did one by the book and it just popped a gasket 88ftlbs seems low to hold diesel compression. Told my guy i should of milwaukeed the thing on

[@johnferguson7235]

The torque spec was probably for a DRY torque but you oiled the bolts. The wet torque is different. That's why you couldn't do the 180°for the final stretch of the bolts.

[@nikolanikic3494]

Hello, what is the name of the tape with which you measure the clearance of the bearings on the crankshaft ..

[@TROllingNINJA2031]

that was so nerve racking watching you use that breaker to tighten those head bolts, i know its to spec but i've had my fair share of stripped threads and snapped bolts and just feel the pain of other when it happens to them Dx

[@lodollar23]

I hope you got a perkins on that glider lol.

[@alyssac1431]

How do you get the correct torques without the smart arms and machines they use in factory?

[@anthonymelchionno109]

where did you install the thrush washers on the main caps

[@jagannathchowdhurydpgiti3194]

Cool

[@FishFind3000]

4:40 why do those two center red outlines holes on the high side have no passages under them?

[@spankey0069]

I like it too ;)

[@briansmobile1]

Yeah!

[@abdallasakor894]

All love from Syria

[@smms1276]

COOL 👍

[@mostafaali6321]

hello all. can you wright the masure of torqe killo gram the crank chafet and syleder hed torq for berkins engine four piston . thanks

[@imnotahealthandsafetyperso4889]

The manual is for the phaser engine not the 4.236

[@ozzstars_cars]

Nothing like a police decoy to slow traffic down.

[@dennisreelie1720]

Ozzstar with a hitler stache too boot

[@nugenki]

The skeletons distracted me!

[@stevemazzarella9259]

I use a 3/4 ratchet

[@briansmobile1]

Cool man, cool.

[@beep_beep_beep]

You cleaned the head gasket surfaces then touched everything with your oil covered gloves.

[@greasyhandsauto-shaunbutte9726]

Good thing you can put up 300 pounds!

[@VivoVivo-pz9ip]

How to settings the val

[@hopsgarage5513]

Nifty

[@whatnextsunshine3046]

Haahha...like the beginning...tear it down..build the new...lol

[@الزعيمالاحمدالاحمد]

جيد جدا🙏

[@الزعيمالاحمدالاحمد]

هاي

[@whatnextsunshine3046]

:-)

[@ryanhester5269]

Cool

[@jacksonsinflatablechannel]

cool

[@tjf1531]

Cool

[@oxulucozcan4923]

Cool