Bricked iPhone 6S fixed by Nand (4K)

In this video we are showing how to fix doesn't power on iPhone 6s by re soldering HDD IC.
The question is how does i diagnosed this phone?
The user informed me that the phone was bricked by dropping it.so first i Connect it to iTunes and it connected automatically in DFU mode with no serial number. Indeed the serial number is programmed in HDD(flash chip).so it indicates that the issue was with HDD(flash chip) because the phone was dropped by user. It means the HDD(flash chip) might be disconnected with PCB so I removed the HDD(flash chip) and resoled (reball flash chip) it.
The whole process of resoled you can see in this video. After this process the phone turned on directly without any software interference.
NOTE :- This work should be done by only professional technicians other wise you gonna brick your phone

[@ashfaqrehman93]

Temperature is used 380c

[@turtle45167]

thanks for taking the time to bring the information you do! It is such valuable information when you explain the process of diagnosing the problem!

[@Macallanful]

Thanks for the videos. Please do not ever stop it. I love you! What you are doing is art! Thank you so much!

[@mobilehardwaretech6975]

Thank you Ashfaq bhai you are r the best in this field

[@0413sk]

Hey, you should have a formal tutorial on how to do simple board repairs, and also showing us your equipment!

[@habibnaderi1075]

Whats that yellow liquid called when you put on and also whats that small ribbon called that you use for cleaning?

[@mdchala]

long time no see! please upload more videos regularly, thanks

[@ashfaqrehman93]

انشاءالله

[@mizamix105]

great video and good problem description on troubleshooting. i hope you will keep on this great efforts

[@tigerfighter5077]

I have an iphone 6s plus it works good but when I turn it off then ON it will goes to DFU mode , so I have put the new software but still is the same problem . Do you know how to fix this problem ?

[@Imnotimportant555]

The serial number usually does not come up on iTunes until the phone has booted to setup or something like that. Now I'm not saying that it may have changed in the newer version of iTunes but usually that is my experience.

[@pauldanieltriff7950]

Great job thanks,very useful! I have a curiosity,from your experience can you tell me please,after removing the nand flash if connecting the board is the phone turning on or is completely dead without the nand? Is it showing the logo anyway?I'm asking because i need a proof that i didn't damage the cpu because of overheating after removing the nand. I tried many times to replace the nand and always at the end the phone doesn't turn on anymore,i used 320-350 degrees. Thanks in advance.

[@saltcityrepairs5121]

Did you program the NAND or you just reballed it?

[@shaikhsayeed7235]

Sir its a great learning with you sir please help about tools and paste ;liquid to be used where the ICS available let me know

[@ShaunXXstafford]

ashfaq... I do a lot of u2 pm ic etc. Most of the time like iPhone u2 is easy to diagnose but. With things like this is it just educated guess or do u have method of chip testing or chip map sheets etc like they have in Samsung Sony labs etc?

[@DanialSherom]

hy mate don't you have to reprogramme the new chip?

[@chelogarcia69]

hi! can you please make a video on how to transfer the original home button touch ID information to a new home button. I accidentally broke and tore my cable flex during LCD replacement and i can no longer use the touch ID on my new home button. I understand that the home button is paired to the logic board but i'm hoping that there's something you have up your sleeve, Deep Fix. Thank you in advance!

[@NicVandEmZ]

What would happen if copy NAND chip info from iPhone ones and then put the iPhone info on google pixel NAND chip

[@anrivera1975]

@Deep Fix, I have a disabled iPhone that my wife blocked trying so many times the passcode, now all pictures are stuck inside and no back up is available, is anyway to remove the memory of this phone and extract those pictures?

[@jesusp.7774]

Nice work deep, one question what its the temperature for removing and resoldering ?

[@ashfaqrehman93]

380c

[@javanpohl1365]

lowest air flow speed or something else 1-10?

[@ShaunXXstafford]

Although u need to get to know u r own heat gun. easy method I find is easy Samsung t210 charging port to calculate then go from there. I have 1 heat gun that is 310 and my other is 410. Also bear in mind tip size on gun

[@mauiconnectservices3368]

That wasn't too high? I have issues getting it off, i end up knocking other things off in the process. Luckily i have enough motherboards that dont power on even to mess with

[@m32969552]

Oh Yes All right. Very Fast hahha if you used temperature at 380 C.

[@supinac17]

Hello Deep fix, how do you know that its related to NAND and not for example short in VCC MAIN etc.. Phone had not power in the begining to it looked like other problem, not NAND. Thanks for reply

[@noufu5601]

i have iphone 4 error 3194 what problem i also try another cable and pc

[@eduardoerivez5775]

2 questions... Where you buy the template to do the reball?? and what do you use that kind of paste??

[@gahramanliorkhan2477]

Ebay

[@AnyeongF91]

Ashfaq. do you currently teach this yet like for certification?

[@DEEPFIX]

no

[@AnyeongF91]

id pay you $1000 for a 4 week course of training

[@alaabinsalem]

Agree 100%..

[@promax_works]

hi when i change nand flash i need to cupy ios to another nand flash or itunus will do that

[@yossish8291]

?What type of flux you use please

[@livepubgstream3652]

my iphone 6 unable to activate . what i do????

[@sarisefa6165]

I have an iPhone 4s. when i try to turn it on, warm up circuit

[@H3D_CALI]

this metod eliminate the icloud lock ??

[@MazharIqbal-oi4mb]

iphone 6s touch not working solutions ???

[@siddharthamokka3881]

hi i have an iphone 6 with activation lock error and a 6s with display ic problem! can i solder the 6s nand to 6 without reprogramming it????

[@ethanfisher2791]

No sorry. Those for one aren’t compatible with each other but you also have to replace the cpus, eprom, and I believe the baseband

[@itechbh1869]

olá boa noite sou brasileiro e trabalho na área de reparo em iphone aqui no Brasil. peguei um iphone 6plus para trocar o slot de chip e agora o aparelho não sai da tela da maçã e tbm não reconhece no iTunes alguém tem uma dica ? HELP ME !!!!!!

[@alitech4376]

Apko kaise pata chala ki nand reball karne se ok ho jayega

[@r_rzzar]

How much upgrade storage ip6/16?to 128gb im from indonesia

[@jatindesai2437]

Is this same for 6splus error 9.....?????

[@mohdnazreenmohdramli1349]

What type of flux and temperature you used?

[@BlackCat-qm3sj]

How do I reinstall the new chip plz reply

[@jaiznl2536]

same hdd ic or buy anew one

[@iphonerepairinglab5098]

from where i can get data if nand is corrupted

[@George241312]

how did you come to the conclusion that this chip was faulty?

[@Mobilerepairsolutions07]

George241312 error on itunes 4013 meand hdd fault

[@SuperMatmos]

How did you arrive at the conclusion/ diagnosis that the HDD IC faulty?

[@DEEPFIX]

please read the description.

[@fabionegreiros8756]

Temperature and air flow???

[@roydisc8413]

very nice video, thanx. but i had a problem with iphone 6. after i changed the screen. the phone worked good, but when i removed the screen one more time. i detached the battery while the screen was still connected. after that the phone wont start or show anything on screen, you can hear it connect on itunes but stays black screen.i tryed the old screen too, but no luck. what could be the problem. i hope to get any idea how it comes and so i can tel what i need to repear it.

[@DEEPFIX]

+Roy Disc it might be wrong screw issues. check out our FB page you can find their

[@roydisc8413]

i used withouth screws either. nothing.

[@KG-Handy-Store]

which hot air station have you?

[@ZYH909]

thanks man you are my hero it works like gold

[@kinzakhan4370]

is it possible you can remove icloud locked acc?

[@abufarisham64]

Pls..how did u know that the nand is the problem,,is there any way to examine?!

[@khangahraman5891]

if u see apple logo, but not booting and itunes error -27 it means it is nand flash problem

[@pyusd]

halo deep fix, how to buy tree chip for unlock icloud?

[@paulbenjamin984]

Hi there, where are you based ?, thank you

[@tarzanchitah118]

ممكن تتكلم على الادوات بدونى ادوات يستحيل تصلح هاتف جزاك الله خير

[@user-gz1dc4mn6r]

I hope you bout your link for your tool and thanks

[@farisizzuddin3057]

i have an iphone 5s. when i try to turn it on, apple logo appeared and the my screen turn blue. can u tell me what happen

[@plzdonhack]

Reball eMMC IC or PM IC

[@farisizzuddin3057]

ty

[@BlackCat-qm3sj]

Is this work without replacing the whole motherboard I'm trying to remove iCloud what chips do I need to change

[@BlackCat-qm3sj]

@@grandmalama what's the microwave gonna do blow it up

[@BlackCat-qm3sj]

@@grandmalama hey what does he uses to reinstall a new chip can I use soldering paste

[@JAKHOOON]

Good work men,respect.

[@abirulislam664]

Where can I purchase this service?

[@edvin19]

How u know its hdd problem, what it showed u in ac

[@DEEPFIX]

check out description.

[@LuigiCiabattoni]

Excuse me, what tools to use to remove the resin

[@DEEPFIX]

just normal blade and hot air with 230c you can see it in video at 1:55

[@winMANhun]

Can you please tell me what kind of material is used at 2:03 ?

[@kdm3822]

solder paste over a solder stencil.

[@ziajan6766]

Ashfaq bhai fault ko maloom karna batae plz.is tarah k video ks koa matlan nahi hai.

[@soniachhatwal8181]

Bhaiya ap ke shop kha pa ha

[@ethanchow7103]

did you just reball the chip or use a new one? thanks

[@ethanchow7103]

nvm, I saw the thumbnail saying reball :D

[@DEEPFIX]

jest reball

[@javanpohl1365]

Can you buy that reball template somewhere or did you all make that yourselves?

[@nimbus1995]

+Javan Pohl you but it somewhere

[@medmlk1813]

you can buy it frm her :www.aliexpress.com/item/8pcs-lot-IC-Chip-BGA-Reballing-Stencil-Kits-Set-Solder-template-for-iphone-4-4s-5/32638725700.html?spm=2114.01010208.3.1.8xfArQ&ws_ab_test=searchweb0_0,searchweb201602_2_10065_10068_10084_10083_10080_10082_10081_10060_10061_10062_10056_10055_10054_10059_10099_10078_10079_10073_10097_10100_10096_10070_10052_423_10050_10051_424,searchweb201603_9&btsid=feeea403-762e-4b16-8b08-f8c3e825d30e

[@crazychillboy]

what you put at 2:04 on the template for reballing

[@TutorGames4You]

soldering paste

[@AbdullahJirjees]

Is there anyone in Malaysia can do this?

[@hattabsharapov5823]

Please tell me how do you know that it EMMC?

[@ashfaqrehman93]

Go through disruption

[@nickst2797]

This is a BGA chip correctly? Is it ok that the rest of the board isn't pre-heated?

[@JoaoPedro-wp7zr]

what its the temperature for removing and resoldering? Thks

[@ashfaqrehman93]

380c

[@mrsemifixit]

+Ashfaq Rehman 380c for all chips or just this one? What air speed

[@v2cell992]

And the leakage of air?

[@mehmettekagac208]

Adress

[@francescobruno2145]

number 1 the best

[@kazakhvegypte9118]

assalamu alaikum ya ahii, baroka Llahu fiika .

[@XynGG]

Will flashing it remove icloud lock??

[@robert-7353]

No

[@user-ll3xj3lh9h]

Temp? pls

[@ashfaqrehman93]

380c

[@alaabinsalem]

Ashfaq, I have SMD Rework Station and in the temp of heater, there are numbers from 1 to 9 for temp not like 100c or 300c, So How would I know if I put it at 5 for example what temp degree i'm working on it..? may you help me..?

[@q8lord_kw]

Thank you so much 👍👍

[@sasanzareei5505]

so how did u know that the problem was HDD??

[@iPhoneTechGT]

Bro, Check the description of video, Sir. Ashfaq already explained! ✌️

[@DEEPFIX]

go threw description we had mentioned their

[@sasanzareei5505]

thank u

[@vfxnawaz212]

iphone 6s error 4013 solution plzz

[@DEEPFIX]

+The love songs / mashup remove nand and try to restore if error 40 then replace it

[@ahsanindia2444]

Salam .taso kam za kar kawi .pakistan ka kna bal malk ka ...?

[@gauravmania92]

sir mujhe bhi sikhna hai aap jaisa

[@abuzaidalk6022]

Hello, Temperature pls!

[@hilmialbums2692]

please read people comments!!

[@abuzaidalk6022]

Thanks bro

[@repare7688]

How you know hdd is fault and is not another ic???

[@DEEPFIX]

please read the description.

[@samad_kvk_2010]

thanks for solution

[@SamehAbdall]

5s An unknown error 50

[@technicalknowledgesupport6382]

thanks

[@zoubirdjelouah3273]

Good

[@tarzanchitah118]

you are genuis masha allah