You're Overreacting About LEGO Clone Troopers

I talk about some very hot takes in the Lego Star Wars space such as the new Clones, LEGO Investing, leaks, and more! Let me know what you guys think about these takes and comment some that you might have more another video!
Memberships are now available on my channel! Become a "Brick Master" by clicking the link below and get access to priority comments, exclusive vlogs, and FREE giveaways every month!
/ @brickmasterharri
Affiliate links for products in the background
------------------------------------------------------------------------
Display Shelf - amzn.to/49RmoE7
LED Display - divoom.com/?dt_id=612661 (BRICKMASTERHARRI for 10% off)
Display Stands & Cases - www.idisplayit.com/?gad_sourc...
Follow me on Instagram: @brickmasterharri

[@brickmasterharri]

Become a member today to win a Times Gate display and Lego at the end of each month! Only 1 member at this moment so your odds to win will be HIGH

[@gag-dodgers]

👋

[@derrickhuff6234]

Thank you finally somebody that gets me these little kids whining because they didn’t get 100% accurate minifigure it’s not that deep it’s a plastic figurine that goes with what your building

[@Purple_Stud]

@@derrickhuff6234I think everyone is allowed their own say in this argument but I wouldn’t say little kids care about quality as they don’t have to buy sets for themselves I think it’s mainly nerdy (not in a bad way) teens and adults who collect their Lego just for the figures and their value

[@noahalbers8037]

A lego ambassador awesome

[@FabuBrik]

The misprint on the 212th helmet and the waist capes are far bigger issues. There's no doubt the holes are not ideal, but probably more just that people are sick of hearing about the helmet holes. Great video. I was hard on you on some previous LAN videos but I do really appreciate your genuine joy for the hobby. It's far easier to go down the path of hating on every little thing about the sw theme and your optimistic approach is a breath of fresh air.

[@brickmasterharri]

I do think the printing can be better for sure like Fox and 212th! Thanks for the positive words bro I really appreciate it. Thanks for being apart of this community🙌

[@MuchDrop]

​@@brickmasterharriI think that the fact that lego themselfs photoshopped ti down on the 501st packaging is enough for me best clones = clone army customs

[@Neckbone_47]

It’s a TINY little triangle you can’t even see from far away I jus don’t get it 😭

[@MuchDrop]

@@Neckbone_47 but there slogan js only the best is good enough

[@cutestcreeper569]

4:59 How the heck did everything described about the lego collector genuinely describe me perfectly? I literally have entire oc's and storylines planned out!

[@brickmasterharri]

😂😂

[@meow-ls5ph]

The 2003 cloud city was fantastic for its time, it may be a little outdated but it was way ahead of its time

[@brickmasterharri]

Yea! I don't think the set is worth thousands of dollars, but it's a pretty good play set!

[@meow-ls5ph]

@@brickmasterharri Yeah but its definitly worth the original retail price

[@Habsfan56744]

So think about it if the clones now a days didn’t have helmet holes everyone would probably be complaining that we can’t customize clones and put things like Marco binoculars on them

[@brickmasterharri]

Mmmm good point🤣

[@Samfan4Films777]

No I don't think so because no one ever complained about that with the regular phase 2 helmets.

[@Habsfan56744]

@@Samfan4Films777 fair point

[@jdbricks9266]

@@Samfan4Films777no, a large part of Lego sw fans were complaining that there were no helmet holes in p2 clones, that is exactly why Lego changed the mold after 8 years of non-holed helmet mold.

[@legoroan9866]

@@Samfan4Films777they complained ALL THE TIME

[@transformandgobricks7820]

I don't hate the Helmet holes on the recent Clone Trooper figures. Seriously, people are over their heads with the hate over new holes on the helmets! Guys please, if Lego group had decided that they should make the holes lower, the accessories would have been looking very weird on the helmets, there just wasn't any other way to do that for them!

[@spencerboerboom4043]

It would've been fine if they would've taken the MOLDED HOLES off. At the end of the day I think they look bad but not bad enough to stop me from building my army

[@rhkgboptbigrjkbj]

for me its not the helmet holes its not anything like that its the blatant false advertising on the at-te. its clear lego knows its a mistake but are unwilling to fix it so they simply make it perfect on the box and hope no one will notice.

[@brickmasterharri]

I do agree with you there! I talked about the bad rendering jobs in one of my other videos and focused on that point. I don't blame the Clones themselves for that stuff, but instead just blame Legos design team😂

[@rhkgboptbigrjkbj]

@@brickmasterharri the clones are good lol. i like them a lot havent had the chance to get the gunship yet but i really like the 212th ones

[@backslay]

helmet holes are not that bad, but lego HAS TO start giving us cloth waistcapes again

[@scottdavis_34]

Harrison coming in 🔥 with this vid!! I’ve always felt like many of us (myself included) have been so focused on what’s coming next that we forget to enjoy what we already have.

[@brickmasterharri]

Thanks Scott! I sometimes find myself thinking that too

[@jakecannanite4558]

I remember seeing a short from another collecter saying to look under shelves because sometimes people will hide sets they want to stash it until a sale. That kinda left a bad taste in my mouth. I know im a grown man buying toys but at least im not hiding them so a kid cant get to the toy first

[@generalveers9544]

The only changes to new clones that bother me is the waist capes (I had to be told that’s what they were on the officer in the second 501st pack because they’re so non-apparent) and the printing on Fox is pretty sad with how inaccurate they made it. Helmet holes are such a non issue though

[@brickmasterharri]

dual molded legs would be dopeee

[@generalveers9544]

@@brickmasterharri LEGO seems allergic to duel mold unless it’s a figure in a CMS or a $300+ set

[@LayersonLayers]

Most average lan video

[@quicksaber6562]

I subscribed because of this video, the positivity and chill opinions about actually trying to enjoy the hobby makes me appreciate and respect you. Comparatively, when I watch super turbo Lego youtubers like MandR (no hate towards him, I just feel stressed out when I sit down to watch a Lego video and it feels like a school report) it feels like they have to complain about helmet holes each video as a whole separate hobby.

[@zacharymessner6157]

I actually really like how they combined the animated and live action to finally have one consist look for the clones but the helmet holes are just awful ruining the whole profile of the helmet and they really should be including waist capes it seems like they’re just being plain lazy

[@Poison_Paradise]

I mostly agree! I think helmet holes should be lower, and the molds for the attachments should be changed to accomodate that! But as they are now, I'm not overly pressed about it. I _am_ overly pressed about the kamas though- they are just awful. If they had fully connecting side leg printing, or had double-printed (for the white) dual molded legs, then I would have 0 issue with a lack of physical kamas.

[@legocpa]

I don't think I'm overreacting about LEGO Clones. If I was overreacting, IT WOULD LOOK LIKE THIS 🤯🤯

[@__randomness__]

Hot take people in this community now are just angry all the time

[@davidsui4940]

im just recently getting into the lego star wars space, and the amount of negativity is turning me away from a lot of the content both from creators and from lego, so its nice to listen to someone who actually tries to be positive

[@axlebrix9993]

thanks for choosing my comment dude and great vid. praying that we get more Old Republic sets in the future 🙏🏽🙏🏽

[@brickmasterharri]

No problem bro I had to show the Old Republic sets some love🔥

[@LicheyLost]

I have no problem with helmet holes, what ticks me off is the waist capes, like i have a couple clones and like to display them but from afar you barely can see the printing on the legs compared to a cloth one that adds depth and style(i really like cloth elements in general tbh)

[@Thatonekid1579]

The helmet holes don’t bother me but the printed on waist capes do it looks like a karate belt and is it really that hard to bring back real waist capes.

[@08Elizer]

4:18 people just don’t understand that people have opinions and there is a difference of hating on it and just letting them be

[@britneyaustin2110]

really enjoyed this video🤩 could listen to you talk about lego all day!

[@brickmasterharri]

and you eventually will😉

[@iliadnetfear2586]

I think the Sequel sets had more play features for the same reason Prequel sets used to have more play features. My parents' generation grew up with the original Trilogy, my generation had Clone Wars and the Republic, now the next generation are getting the Sequels, so more play feature for younger fans.

[@MarcellGal-ey2ty]

Costumaze clones that would be good. (sorry i might wrote this wrong)

[@Damon007_]

I love the idea of helmet holes but Lego for some reason put them in the wrong place, to add on to that they give the clones printed waist capes, lego really need to up their game.

[@phxzombiekiller7112]

The only problems about the helmet holes now is how easily the range finder pieces fall out and the ugliness of the side profile with the spot that attachments are put in universe being right below the helment holes. They should've either made a new visor piece that would work with lower helmet holes and put the holes where they should be or change the mold so that the attachment piece in universe is lengthened to where the holes are now so it isn't an insulting side profile

[@phoenixproductions2846]

About the clone animated/live action style, I wish they just kept the 2014 live action style but swapped the legs for the new ones and just made all the designs even the CW ones with that style

[@starmovies5523]

I don’t have a problem with the helmet holes. I have a problem with them being in the wrong place! They should be shifted down on that knob. That’s why I’d rather not have them.

[@Poison_Paradise]

I appreciate so much that you have no hangups talking about _playing_ with Legos I made a Warhammer type tabletop game for me and my friends, because making a MOC just to look at felt wrong to me, I wanted to _play_ with it haha Lego are toys, simple as

[@Imperial23_]

While I think Captain Rex being in a Microfighter set is kind of a marketing ploy, I think it was a missed opportunity. I think they should have made a full-scale version of the blue Y-wing as we haven't had a Republic era Y-wing since the first one back in 2008.

[@brickmasterharri]

Me toooo

[@imperialesoberkommando]

Lego should have made a Commander Thorn instead of a Fox, considering that the faded prints of lighter colors are a well known issue. With Thorn Lego would have been able to avoid this problem since every armor piece of him is mainly white, so they would have only white pieces to print red details on. Additionally Thorn is the cooler shock trooper commander anyway. Sometimes I really do not understand Lego's choices of things when such issues like a poorly printed minifigure could be so easily avoided. Although one could have the theory whoever decided on the minifigure selection of the Coruscant gunship did not know or care about The Clone Wars at all since the gunship's minifigure selection does not represent any specific episode or arc of the show and therefor the ones responsible did not even know that there is another shock trooper commander other than Fox.

[@deananimator1303]

In my opinion Lego has made some great sets the last few years a few examples: the at-te, the gunship, the ghost, Yasin 4, t-6 Jedi shuttle and many more

[@definitely_just_floating]

I’m more worried about the possibility of lego messing up future clone figs than the helmet holes.

[@snakestudios117]

Thank u bro. I love the new clones are awesome. I like the helmet holes because they allow more customization. For example i can turn a reg into a heavy like i did with a 212th clone

[@Mattus4368]

Love your positivity man, keep up the good work I like the format of this video!

[@CC--qn4gf]

Finally a LEGO Star Wars KZbinr that is able to see more than one perspective.

[@MrScaryPasta]

I wish we could’ve gotten sets for Star Wars TFU series. I was saddened that LEGO only made one official set based on such a great game franchise. We need more love for Star Wars games from the EU old and new. 😢

[@omarbaba9892]

I can get some people liking the holes but it’s completely undeniable that there is a distinct lack of quality with clone figures compared to pretty much every other Star Wars figure The fact they make such intricate moulds and prints for every new stormtrooper variant yet can’t get Fox’s chest armour the right colour is just pathetic

[@TheonetrueMeadow]

i think your absolutey right about helmet holes idc if they have them i care bc i have the figure everybody talks bad about them they are good i like what you said good job im happy i found a postive person on youtube you earned a subscriber :3

[@michellerahe4853]

Honestly I miss the colored arm prints. It represented the stripes going down their arms depending on their legion

[@brickmasterharri]

Mmm interesting! Haven't thought about that

[@Purple_Stud]

Honestly I like when the whole arm was the colour of the stripes in 2014

[@michellerahe4853]

@@Purple_Stud yee cause it signified more of the legions colors

[@user-ss2ml3vs8u]

I personally think the helmet holes should be on figures that are meant to have accessories, not all of them

[@frankiek_1]

The thing I can agree with is the lack of waist capes, but I do not mind the helmet holes at all, though I will admit in front view it does make the helmets look off but it doesn’t bother me. What does really bother me is like you said how they are trying to combine the animated and movie styles for their prints. While it is nice to have consistency between different kinds of clones, I would still prefer having the more realistic movie versions for phase II clones

[@Big_RandyTM]

All I want are some waist capes and for them to bring back colored arms. Then we’re good.

[@blackbirdmotionstudios7423]

The problem is they should do both movie accurate design and animated design like back in 2014. The new hybrid is weird and they made the choice to save money. The design prints overall is very bad for clones for some reason. 212th and fox for example

[@Knvctyy30]

IDC about the helmet holes , LEGO IS A LEGO MAHH BOIII❤️

[@brickmasterharri]

OUR BOIIII

[@terrified057t4]

The 4+ sets are iffy to me. Either they're great like that mini TIE Fighter, or they're the the Tenoo Jedi Temple. For the helmet holes, I kinda wish it was like CAC. Give me the opportunity for a visor AND a rangefinder. I defo want more sets with customization options, with the macrobinoculars being #1 in my books. I also would not mind more Jet troopers, it is a core memory getting the snail tank back in 2009. Leaks are weird to me. Before anything in Europe, every youtuber seems to be talking about "rumors" (really just their own personal hopes & dreams interspersed with actual rumors), then once Europe comes in with all the big leaks I get this unnerving feeling of too much accuracy. Like, I feel like this leak network has the capability to tell me how many nose hairs the CEO of the LEGO group has... No way they're actual 3rd-party leakers, or even an insider, it feels like LEGO purposefully building up hype so they don't need to make any real advertising.

[@neptunemacaw3354]

Helmet holes and lack of fabric camas has grown on me. Especially with Lego’s valid reasons, but there is no defending the inaccurate and low quality printing that appears on the 212th trooper and captain fox.

[@edwardlevin6520]

i think that buying the sets in store is way more fun than buying them online

[@Lime_is_LushOFFICIAL]

4:48 love the palpatine!

[@otminealnamer1385]

I think the clones are just fine under the sense that compromises have to be made, and playability/compatibility>detail; I think that philosophy is what makes lego so great in the first place. That's why I think waist cloaks were removed; the plastic ones were horrible imo, even if they looked decent, because you couldn't bend their legs without taking it off(I remember having the old clone battle pack with the walker, and the captain couldn't move his legs at all). The cloth ones were better, but you still couldn't sit them down on studs as easily and the fabric would eventually rip over time. The printed ones don't look great, but the figures have full range of motion, which is great in itself. I simple side printing of the legs would help make it look good enough without risking range of motion like the old ones did. Looks certainly matter, but they should never overrule compatibility, and playability. The same thing can be applied to the helmets, so I think the helmets we got are pretty good. I also tend to enjoy playscale sets more as well, or at least sets with lots of interesting build techniques, which often entails play sets because of the clever design required to fit play features inside a model. When you don't have to worry about play features, the build process is much simpler. I can't really get into capital ship UCS sets, or things like helmets, because the way they're built is kind of tedious. To me, the playscale sets are the heart and soul of lego sets, and what it's really all about. I also really like micro-scale builds because of the creativity required to represent a larger object on such a small scale, yet so many seem to gloss over them. It really came as a shock to me to see so much jaded cynicism regarding star wars lego after not partaking in the hobby for 12+ years and coming back to it. Lots of entitlement and too much focus on "investing"(scalping, more like), too much focus on exclusive minifigures, not enough hype around how fun the sets are themselves(same thing happens with transformers toys, sadly). Figures are great and really bring a set together, I get it, but they're just a cherry on top of the ice cream sundae. Really love the positive takes here that sees lego for what it is, rather than wishing it'd be something different, subbed!

[@spencerboerboom4043]

There is a reason why waist capes are removable 😂😂 Taking them out takes away from the people that enjoy them. The new printed ones are lazy and not good looking as is

[@user-mp8qg5tb5e]

Sorry but I have to disagree the cloth ones were perfect but the you can sit the clones without the old cloth ripping, and I think the reason they changed is to save money and make more money by increasing the price. If they really did want to help they would have done a 360 Kama print

[@whyareyourunning3429]

I think lego should do less vehicles and more terrain sets because my droids keep falling over.

[@MoldingDoor]

exactly! the clones we are getting now are really detailed and excellent in quantity per set i'm glad that theres people that appreciate them :)

[@mimicbai]

I can look for good deals on lego star wars minifigs, to see if I can make some money. But I don't get the idea of buying a set just to keep it sealed for like a decade. Figs I get but not sets.

[@Fivenightsattrashreddit]

i finally decided to play the old republic when i heard you talk about it and i named me mayn ayolis and i realised i wanted to name myself ''squirter of the creamy liquid'' how to change name

[@LLegaLLizeITxC2]

i can live with the helmet holes, but they do look better without. Commanders like cody or fox kinda need their own mold, and then the normal troopers could have proper helmets

[@joshuasparks7076]

To be fair lego investors and influencers also technically keep the secondary market prices lower that they could be if no one was buying the sets. To elaborate with out investors maybe only 5 sets get sold and then after retirement the prices double because there is a limited supply in the secondary market. However investors buy large quantities and influences encourage others to buy more. Now the secondary market after retirement has 500 vs 5. Therefor more supply after retirement. Numbers are obviously down sized for sake of compression.

[@Samfan4Films777]

The main problem is LEGO just turned their backs on their fans and lied to them countless times. Such as with the box art for the AT-TE, and having Waistcapes in Dreamz and Avengers but not Star Wars. They know what they're doing is wrong, but for some reason they hate us.

[@jdbricks9266]

Bruh, they made a 501st battlepack because fans asked for it, they made a UCS gunship because fans asked for it, they made captain Cody because fans asked for it. The hole helmet holes thing is because fans asked for it, if something LEGO actually listens to the fans and gives them the sets they want. But yeah, just because of a render issue and waistcapes “lEgO hAteS uS”, bruh come on 😂😂😂

[@AKguru762]

Re-sellers have ruined every hobby. Starting with concert tickets and all the way to Lego.

[@brickmasterharri]

Mmm that's interesting to think about

[@thefirstlegion19946]

Couldn’t agree more, the lego star wars community should be thankful we are getting so many clones but all they do is complain

[@brickmasterharri]

My mannn! You've been killing it with the content recently keep it up💪🔥

[@asuramaru4700]

I personally love the 212th 501st troopers people complaing cand easily get plastic or fabric robes from aliexpress to solve the issue... And for the holes get over it or put a visor on every figure not that hard at all

[@BossBast1]

Personally, I liked the the og helmet having wider visors, especially on white phase 2 clones. holes are annoying for no reason, they should have though how to make it better, or be in place. Honestly I would rather have old molds and no accessories holes at all. an new special dual mold for the visor helmet.

[@JurassicWarz.124]

*Opinion exists The Lego Star Wars community: “I don’t even know who you are.”

[@Menevolence]

you dont need helmet holes for grunts. they are grunts for a reason

[@Purple_Stud]

Honestly I think helmet holes are a great play feature but they don’t work on antennas or helmet torches if it would be connected to the thicker extruding ear hole area it may work better

[@Kriviach]

I always thought that the whole helmet hole debate was so stupid, like jesus christ u can barely see them anyway whats the big deal, all they do is give u way more customization options which is amazing

[@user-mp8qg5tb5e]

Its cause imo they just look worse than the og ones. If they had just changed the moulded accessories (excluding the range finder) everyone would have been happier.

[@commanderdj]

All I care about is spending £120 on a Lego set and not having a second layer of white print on my clone minifigure that has a pink chestplate

[@BJBrickStudios]

I hundred percent agree with everything you said in the video helmet holes don’t bother me either if there had to be one thing about the new clones that does bother me is in foxes case the pink look on his chest plate and with the 212 troopers the messed up helmet print it’s not a big deal but Lego could do a better job with printing, but that doesn’t stop me from adding new clone troopers to my collection.

[@Purple_Stud]

Honestly I think we need more colour more varied price range and play features in Lego Star Wars sets because these past two years have been a drought for these factors with the only real colour being on the t-6 shuttle at least next years leak show really good sets at low prices but please more play features Lego all we have had this year is a cockpit a studshooter and a storage compartment if you’re lucky

[@h4rpoon]

I don’t mind the helmet holes personally as long as the printing is good, unlike the 212th which was undeniably bad lmao

[@SzoltS1]

The thing is, if Mandr production says something, every casual lego collector will go insane over the same thing. Greatest examples are the "newer" droidekas and the new AAT. I think the new droidekas look far more superior to the ones from 2002, yet still people say the new ones suck and old are better becouse Mandr said the same thing. Same goes to AAT, "Terribly inaccurate and horrible looking", I love Star wars, and if I haven't heard for the 56th time from Mandr that it's "inaccurate", I wouldnt have noticed otherwise. The drama about the UCS Gunship was ridiculous as well, yet people still supported this guy bashing on such an amazing set, becouse of minifigures. Now this. The AT-TE became from a loved set to a quite disliked one on the internet, becouse he started mentioning how "horrible" looking the clones are in the set. I think they look good. Every stupid LEGO star wars drama has Mandr as the source. He has opinions, but people shouldn't follow them blindly.

[@brickmasterharri]

I'm not going to say I agree or disagree, but I appreciate you laying all that out. I've definitely seen my fair share of angry comments that all say a lot of the same things as him. Thought I don't blame him for having those opinions, but instead viewers for blindy mimicking them like you said. As long as everyone has a personal reason for their opinion than we good😎

[@idiotindisguise8382]

I do love the fox mini fig, not gonna lie Also, DAMN!!!!!!! Cheap Rex set!?!?!? Hella excited for that

[@csongi3197]

Totally agree! But how does one become a Lego ambassador?

[@Caosespacial257]

I don't have a problem with helmet holes and I'm glad I can finally have phase 2 clone troopers with visors and stuff, but I think our responsibility as consumers is to complain if we feel that the product we are buying doesn't meet the expectations we are paying for, so I totally respect and support those who complain about the holes or anything that lego does, doesn't matter how toxic they can be. Every single fandom has a group of angry toxic fans and start a witch burning of everybody who doesn't loves legos unconditionally to clean the fandom does nothing but to turn the fandom an unwelcoming place.

[@spencerboerboom4043]

I agree with your take. I have more issues when Lego messes up the printing on clones than how ugly they made helmet holes ( Which could've looked good)

[@user-mp8qg5tb5e]

Bro everyone hates toxic fans complaining but when they complain and attack Lego we generally get a better product e.g the 501 battle pack

[@WWNbroadcasts]

Oh my god this is literally so real And I have to say your positivity is way better then critique after critique

[@brickmasterharri]

Thank you so much bro🙌

[@SilentSamurai73]

Mandr fr

[@WWNbroadcasts]

@@SilentSamurai73 fr bro can’t he be positive

[@WWNbroadcasts]

@@brickmasterharri no problem bro your videos always entertain me and make me smile 👍

[@SilentSamurai73]

@@WWNbroadcasts like i love his videos but he always complains about the same stuff. (helmet holes)

[@RandomnessM]

found you through shorts, staying for the full blown video content.

[@brickmasterharri]

I love to hear that! Thanks for your support🔥

[@Ementhe]

Ngl by the thumbnail i think the gray visor works for fox

[@staticaleel5068]

Wait, there were KOTOR Lego sets!!! Darth malgus had a minifig? Why have I not heard of this until now?

[@armandwintjens8567]

P2 fox is good he is my favoriet clone in lego and the 2013 rex😊😊😊😊😊😊😊😊😊

[@glowinggames1561]

Me personally I don't care about helmet holes or misprints. If anything I like helmet holes because I can put all those visors and antennas you get from the pack of the clones with the Ahsoka helmets on my 212th figures.

[@tomedyy]

great takes!!

[@EwokStopmotion]

I completely agree. I see no problem with helmet holes. If anyone does have a problem they can just buy helmets from GCC. It is awesome that Lego even puts all these different clones in sets. Great video!

[@user-mp8qg5tb5e]

Sorry but I have to disagree. I think they should have remoulded the accessories but they were too lazy and just changed the placement of the helmet holes instead.

[@EwokStopmotion]

@@user-mp8qg5tb5e wait that’s actually a good idea, they could have the holes in the right spot, and they could have made new clone visors like the CAC ones that can go above where the holes are.

[@flamebreaker7318]

Waist capes and the pink chest on fox are the number one issues

[@Eisenwald64]

About the helmet holes, perhaps it's and isseu of blending the holes themsevles with those round parts below them, though they may look misaligned with the visor.

[@brickmasterharri]

that is the main probelm😟

[@Mike-sp7zv]

I'd love to see you and the youtuber "five lones clones" do a livestream on this topic

[@dylanhouser8593]

Great Video 👍 Do You Personally Want A Phase 2 Commander Wolfee In Lego? I Think It Would Be Cool.

[@pacershark452]

What gave me the MOST joy as a Lego enthusiast was finding a Head and Hair piece for my Zorii Bliss figure that looks somewhat like the actress that played her in the movie. if I lost ALL my Legos except THAT one, I would be content.

[@brickmasterharri]

That's great! Thanks for sharing that🙌

[@pacershark452]

@@brickmasterharri Yep.

[@omarbaba9892]

How do people not realise that long term investors benefit the community?

[@Pnutbtrsprnkls]

My hot take is lego is going down hill. There are so many cool sets they still release each year but they seem to just have more and more problems. The quality control used to be the reason I thought lego was better than mega construx but even that's not very good anymore! So many sets I get with blue pieces don't even look that good with how inconsistent the dye Is. I really hope lego does better but until they do I'm gonna buy more mega construx instead

[@Sir_Whooo]

I agree is just the waist capes

[@PASTAMASTA86]

You should honestly not be getting any hate. It’s cool to see a Lego Star Wars KZbinr being positive for once

[@ItzPeanutzzz]

Finally someone who is positive

[@danielleighton4161]

I remember seeing one of those channels that unboxes hauls of figures to resell and they dont even care about the figures themselves but rather the resell value. Theyll just ignore really cool figures because theyre either not super expensive or came out that year.

[@brickmasterharri]

So true😂

[@somethingawesome9547]

So I don't mind the helmet holes, but LEGO's approach to waistcapes is objectively terrible. I would actually, if you're not going to give waistcapes, it is still better to no print them on the legs. They look stupid. They don't even look like printed cloth. If you showed the figure to someone unfamiliar with Star Wars they would be unable to tell what that printed detail even represents; it doesn't look like armor. Give us waistcapes. Given the above, LEGO's clones with waistcape printing are nowhere near perfect.

[@micahchilds4921]

Great video. I don’t think some of the things they are doing with the clones are great but I could never be mad or angry at anyone who likes the sets or figures. Keep being you and don’t let the hate get to you !

[@VAULT-TEC_INC.]

They’re called a “Kama,” not a “waist cape.” 🙄

[@Btomaek]

the holes are just too high they could have made the models better

[@TheBardofLorthan]

Screw the resellers, I get me an official Lego Rex without breaking my bank RAAAAAGH!!!

[@l.1m0n62]

bro when i was kid i was complaing about my phase 2 clone wars style clone that he dont have helmet holse beacouse i can t customize

[@ipp-dds]

helmet hole are good but in the wrong place

[@danielleandnathan]

awesome vid!

[@user-mp8qg5tb5e]

They could have just put them in the right place