I Made Lego Pieces Fly!

Lego propeller pieces aren't meant to fly, but what if I spun them so fast that they did?
My Custom Lego Instructions:
brickstudios.s...
Similar Video:
• This Lego Set Could Sa...
⭐Subscribe⭐
/ @brickstudiosyt
My Links:
linkpop.com/br...
My Website:
sites.google.c...
Gaming Channel:
/ @salienceyt
Business Inquiries:
[e-mail]
#brickstudios #lego #legos
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/a...
License code: 52QV862YXU6XM5TH

[@RC.Bricks]

The gear ratio of one pair of gears is 1:5, and 5x5x5 is 125, so the ratio is 1:125. It looked like you were spinning it at about 2 times a second at top speed, or 120 rpm, so the speed on the propeller is about 15,000 rpm, or 250 rotations per second!

[@cindyisamazing]

6 likes and 0 comments? Let me fix that

[@GggGgg-nc8fo]

Nerd

[@GggGgg-nc8fo]

Lol

[@MichealAftonnn]

@@GggGgg-nc8fo he's not, he's just better student than you. LOL

[@Brick-dx3lw]

@@MichealAftonnnagreed

[@nikolasproctor7061]

I work at an aviation museum and something a lot of people don’t understand is that a 4 bladed propeller actually has more drag than a 3 bladed propeller so the thrust benefit is outweighed by the drag unless you have it going at very high rpm.

[@LachlanHoran-xw7qz]

2:02 the gear speed is 18 times faster than rotating the handle

[@RC.Bricks]

I disagree because 5x5x5 is 125, meaning it would be 125 times faster, but if I’m wrong let me know.

[@LachlanHoran-xw7qz]

@@RC.Bricks I remember hearing early in the video he said 6 times faster

[@RC.Bricks]

@@LachlanHoran-xw7qz if he did it would be 216 times faster, for gear ratios it would be 6x6x6 not 6x3, it’s a little complicated, and 40/8 is 5 so it is 1:5, I think

[@iamactuallyoreoboreo]

airjistzu ripcord, used it when i built beyblades

[@rc-fannl7364]

Lego pieces can also make people fly, when they step on one

[@MaskedGoreDolll]

Where the kids at?

[@qmml]

In my basement😃

[@theconsoleinthecloset]

No, It won't make you fly

[@mistercat739]

Lol

[@BrannonAerospace]

Regarding the rather large prop, you could fix the skipping problem by adding one or two more 24 tooth gears on top of the first one. This should allow it to raise the axel out of the bar while still being powered, and then actually fly.

[@neuronoc.7343]

Lego engineers inventing the rhotuka launcher from bionicle

[@Chezkak]

While this is cool, it already exists. The Lego Bionicle line featured a disk launcher with a ripcord mechanism.

[@Machina_22]

I love the Airjitzu sets. My friend had the Morro one back in 2015 and just recently I got pieces to rebuild my Kai one. Update: pieces shipped and now I can’t put down the flyer

[@qwertyjeffMC]

For the rip coord I don't think there are any but ik that in set 42152 it has a mechanism that might work

[@user-vx5xd6zd1l]

Nice

[@Hood5944-k1c]

City update?

[@thebros4178]

Yessss

[@Colin-v1x]

Do you mean Gtag?

[@harryrigdon8496]

Can u make the longest lego train or make a train that is all sets in one

[@ZACKII_MEXIPINO]

THERES NO WAY THAT WAS 2015!!!! ITS ALMOST BEEN 10 YEARS?!!?! I REMEMBER WHEN THAT CAME OUT LIKE YESTERDAY! I REMEMBER THAT ENTIRE SEASON OF NINJAGO!

[@elbinopaper4629]

100% you definently need to give yourself a longer handle and a bigger crank just to hold it way more firm instead of pinching two plates together while rotating a single lego peice with no handle that could definently help alone

[@Attemptedburger]

The issue you're facing is that the lift you're getting is causing the gears to keep disengaging, so the propeller slows down, losing lift and dropping the propeller back down onto the gears. you need a way of rotating the propeller's axle that doesn't disengage from the gear train while still allowing the propeller to gain height.

[@qwertyjeffMC]

SUGGESTION:Make the axle longer so that it has more time to spin: it will fly better

[@qwertyjeffMC]

Kinda like a guide that will guide it upwards until it flies

[@xiaoranfan9804]

Naaaaaakkkkkkhhhhhh

[@roopeliikka7511]

4:08 the propeler is wrong way

[@kittengoddess4259]

3:50 when you slow it down you can see that the turning motion also jerked the propeller end up and it looks like it knocked it into the air instead of it getting lift… I think a future video where the launcher is stationary or locked down would be a better test

[@puppygamingwttb8525]

This reminds me of the nostalgia of the circuit game there’s a little fan and he had to connect to the battery box so it can get the fan working and it will eventually fall off

[@Star_gazer-yt]

10:32 bro is a professional upstairs and downstairs neighbor

[@Yummy1KK_awesome]

I have one compatible with gears It’s the Old Lego red NinjaGo BayBlsde set just like yours but in red

[@theconsoleinthecloset]

Air raid siren

[@pokemontrainer9285]

I remember doing that with those tiny drink umbrellas when I was little I would have fun doing that for a while.

[@LegoBoomSG]

cool video bro 🤙👍

[@Fugitive_8]

Makes me remember about the toys back then where you had a spiraled stick and a propeller you would push the propeller as strong as you can and it always flew hella high pretty nostalgic

[@krishkumar7999]

now adjust it to make a vortex in water

[@triview129]

Can you try launching wheel on water to see which one can roll on it

[@Kraxel-North]

My little guess is that what you want isn’t light weight, but low efficiency. It sounds contradictory to normal logic, but hear me out; the propeller needs to build up some speed to actually fly up when taking off, and if it’s too efficient, it’ll flop out before having had enough time to get that momentum going. Plus, more mass = more innertia = slower descelleration = longer flight time (hopefully).

[@J56601]

Lego bayblade spinner😂

[@EasyMachine]

This channel never fails to impress me!

[@brix_max]

I did the same with 2 buggy motors and in a specific configuration the propellers managed to hit the ceiling of the room. If the gear ratio gets too high it wont work properly due to limited motor power and friction

[@user-ku7im1cb8x]

@annalloyd9939 NO ONE CARES THAT UR FIRST anyways nice video

[@OccyP]

Just saying that small propellor is meant for water so its kinda unfair for it

[@brickstudiosYT]

Yeah, but I just wanted to try it anyway.

[@OccyP]

@@brickstudiosYT fair enough, but still, you should try it submerged

[@WillBinge]

Airjitzu used a ripcord compatible with the black gears

[@nathanloupee9337]

Try to use the ripcord to make the original design spin

[@Tubelixuno]

Use Pullback motors

[@flynn.czlowiek]

8:17 theres some in lego spike set

[@cibimonflf147]

who is bro like uh brother you’re all alone 😂

[@JoshyBoi7832]

shouldve used a string instead of a lever so u can oull the tring and use ur whole arm to spin it instead of just ur hand

[@user-uz7vz6cn1q]

8:32 u can make your own ripcord you just might have to super glue it so it doesnt combust in your face like it did to me once

[@nikolasproctor7061]

Reminds me of the 2005 bionacle spinning propeller disc. Exact same concept

[@extrascott9977]

could've used a pull-back engine

[@glitchygamingshorts6187]

Great video man

[@brickstudiosYT]

Thanks!

[@stickman20233]

1:04 could you use this technique to make a friction motor and make a friction motor powered toy car thing??

[@brickstudiosYT]

Probably

[@Thehuntingbunny]

I had some of the bade blade lego set that was made in 2015

[@user-eb2ib6ot2r]

try it with lego motors

[@ranjandeb1159]

good job and i love your videos like your wind turbine one that you made

[@random_things66]

❤❤❤❤❤❤❤❤❤

[@user-fq1uh3is1z]

W vid

[@children4415]

Take this device and add a motor so you can make a helicopter

[@dashindony]

I also made one fly

[@Cyroid_1]

love ur intro

[@bailx.1]

Try with a friction motor and

[@RJTheBuilder]

You should of used the city flying helicopters

[@user-qc7uh8uw1q]

Ratuka spinner exists....

[@feryhalim2207]

Lego Ninjago airjitzu flyers😂😂

[@theconsoleinthecloset]

Air conditioner

[@Haker111-ch7vv]

Beyblade made out of lego

[@bryanb3627]

Bro same thing with me for that lego set

[@smantel3653]

The Ninjago spinjitzu sets. Have ripcorde

[@JayDodgeYT]

A death machine

[@Ben-q9k]

Use a motor!

[@krissy01837]

bro make beyblade with this

[@Turtle095]

Hi guys 👋👋

[@brickstudiosYT]

Hi 👋

[@Goofyducky23]

Make it ×50 speed of you cranking and see wat happens

[@lePirateMan]

It's already x125

[@Julius-brawlstars]

I have a few but other colors 9:11

[@MotionMaster123]

Hello

[@brickstudiosYT]

Hello

[@MotionMaster123]

@@brickstudiosYT how is your day going

[@brickstudiosYT]

@@MotionMaster123 It's going great! How about you?

[@MotionMaster123]

@@brickstudiosYT good

[@Richard-uc2bp]

Already did that

[@Galaxyplayz-kp2ip]

Beyblade ahh lego

[@fortressandroidpldn9758]

Beyblade gliders

[@bennm-ct5qm]

dude i used to make that 3 blade propeller with a wind up motor an with a technic wheel to make it easier to twiest and it went flying sorry i ment 2 blade

[@SomeOrdinaryJanitor]

Peter sripol made an rc plane out of lego

[@codingzfun]

NINJAGO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@user-xf6nu4ep5h]

11:03

[@MaskedGoreDolll]

Imagine just minding your own buisness then you get hit by a flying lego blades☠️

[@brickstudiosYT]

Yeah, but I don't need to imagine... 🤣

[@bkb415]

what would happen if you added a fourth 40 tooth gear?

[@brickstudiosYT]

It would be so hard to turn I could probably barely or not even turn it.

[@bkb415]

@@brickstudiosYT thanks for letting me know before ordering the peices to make my own.

[@bkb415]

or what about attatching multiple lego motors and see if they could turn it.

[@brickstudiosYT]

@@bkb415 I'm not sure if the motors would be strong enough.

[@MichealAftonnn]

easy

[@Joplinbrewer-dq4iw]

Get a Lego model!!!!!

[@Zax_66719]

Beyblade

[@개추박이]

지금까지 맞춤법 틀린걸로 지적받아서 빡친 사람의 의견입니다.

[@Yuhuhnuhuh]

8:19 Why not just use the plates with teeth?

[@brickstudiosYT]

I never really thought that'd work because it doesn't bend, but maybe it would!

[@PatGames111]

Wouldn't it just work as a kind of reverse gantry​@@brickstudiosYT

[@fahmaijunior2100]

The likes are 666 lol

[@Shardn]

biden

[@annalloyd9939]

First