Рет қаралды 10
Every User can have their own bridge/node
This video shows the way of installing of
a bridge on Raspberry Pi 3 device
placed at home, connected on home WiFi
Prepare one set of items for a working Raspberry Pi system
Contact us if you want to order one Pi3 set of items
Do a User install on - Windows install folder - c:\dweb
Or, do an install on - MacOS install folder - /Users/Shared/dweb
Or, do an install on - Linux install folder - ~/dweb
Mount SD card into USB adapter and plug into User computer
Bridge install program - brdg-init (MacOS,Linux), brdg-init.exe (Windows)
Example of install on Linux - Open - 'Terminal'
Go to install folder, do - cd ~/dweb
Type - sudo ./brdg-init , be root(Linux,MacOS), run as admin(Windows)
select 'p' - Raspberry Pi 3 install
Wait 30s-3min for download and unzip of of the system image
Select and confirm the device used to write image to
Wait for restoring/writing Pi3 Bridge image on SD card
Wait for verifying/reading Pi3 Bridge image on SD card
Type the initial/home WiFi network name and password
Confirm WiFi network/password and type a key to exit
Remove USB device, remove SD card, mount in Pi3
Assemble Rasprebby Pi 3 system, connect to power
Bring up User program, click on [menu] for settings in browser tab
Click on the 'Menu' of the Local bridge
First time install has 'outward only' bridge IP address
Click on 'gateway' to load and log-in home router device
This is one of many devices, having similar gateway setup
Click on ''Firewall' then on 'Forwarding' tab
Click on 'Add' and enter the required info
Add 'Name' of the forwarding rule
Add port range 12600 - 12631 for the forwarding rule
Add bridge IP address for the forwarding rule
Click on 'Apply' to save the forwarding rule
Click 'Add' and define a new rule for single port 12500
Click on 'Apply' to save the forwarding rule
Click 'Add' and define a new rule for single port 1248
Click on 'Apply' to save the forwarding rule
Click 'Apply' on this screen to save the 3 rules
Select menu 'Settings' tab, click on 'Refresh'
The bridge has 2 ways outward and inward capability
Click 'Bridge heartbeat' To check communication with User and Bridge
Click several times on 'do Refresh' see the update
Disconnect bridge from computer, connect to power only
Token rewards for Bridges