I am waiting to see what direction he takes on this one.
@mitchellstlАй бұрын
Same! Upgrade the ITX board and post sequel!
@richardholland7759Ай бұрын
I liked Windows Home Server. One of the features was it would let you do essentially bare-metal backups of windows PCs. It ran a PXE boot server, so if you have a hard drive failure on your laptop or desktop, you could replace the drive, boot from the network, and do a bare-metal restore of any of the backups you'd made (not necessarily the latest one if you didn't want to). It made that level of backup easy for even non-technical people.
@richardmarkert7736Ай бұрын
Windows Home Server was an EXCELLENT product. Shame the 2011 edition dumped the JBOD drive pooling, and then Microsoft dumped it entirely.
@theindianallroundersАй бұрын
system didnt boot when motherboard out is because of the chasis intrusion built into some prebuilts they do not like to turn on outside the chasis
@herauthonАй бұрын
just fuse the sensor ?
@theindianallroundersАй бұрын
@@herauthon these mobos are notorious they measure the capacitance of the chasis from diffrent pads on motherboard and its pain in the butt to do that job
@BrunodeSouzaLinoАй бұрын
@@herauthon These boards have it as part of the motherboard unlike consumer motherboards where you plug said sensor into a labeled header.
@92kosta8 күн бұрын
@@theindianallrounders No way! Why do they go to such lengths, what is the point?
@Nicfallenangel7 күн бұрын
@@92kostaAcer started doing this to their ultra-light laptops to ensure they couldn't be "accidentally" started with the cover off so you didn't hurt yourself or damage components by shorting it on a metal table or stray tool. The only reason I have for these little ITX wonders is they wanted to take the "warranty void if opened" measure to heart. You try to mod it? Yeah, now you don't have a working system... At least with their laptops, most that I've seen it was a little momentary switch on the bottom that the plastic of the case kept depressed to signify the chassis is closed.
@TheQuickSilver101Ай бұрын
So many of those old atom processors were crazy slow even when they were new. I'm impressed that you got it to do much of anything. Now I'm looking forward to the upgrade!
@StephenMatreseАй бұрын
So, I wasn't crazy, my computer was insanely slow (and, maybe, I wasn't nuts for running two).
@TheQuickSilver101Ай бұрын
@@StephenMatrese If you had a computer that ran one of those old Atom processors I promise you weren't crazy and your computer (like mine at the time) was slow as a sleepy snail
@lemagreengreenАй бұрын
Yeah. They were slow even by early 00's standards, just insanely low power.
@marcogenovesi8570Ай бұрын
@@lemagreengreen "insanely low power" by Intel standards anyway, the chipset was still burning 15-20 watts so the overall board was using still a lot of power for what this was
@SeeJayPlayGamesАй бұрын
the weird thing to me is that even though they were STUPIDLY slow, they could still somehow emulate an Amiga 4000 at full speed... which says terrible things about the Amiga... OK granted the platform had died in 1994 whilst the Atom wasn't released until like 2008?
@LeoLijoАй бұрын
I cant wait for the upgrade video
@HardwareHavenАй бұрын
It’s a doozy, that’s for sure haha
Ай бұрын
yep
@100daysofmehАй бұрын
N100 ?
@jorknorrАй бұрын
@@100daysofmeh the only way :P
@yuan.pingchen3056Ай бұрын
@@100daysofmeh I have a ASRock z170 Falt1lty gaming itx/ac with 32GB of DDR4 memory, this ITX board is 6SATA and 1 NVME, the i7-6700 could be good enough for modern NAS use.
@eliasalcazar6554Ай бұрын
I would slap a PCIe to NVME (or M.2 SATA for compatibility) adapter into that slot, and use that as a boot disk to reclaim that 4th drive bay :)
@richardnpaul_mobАй бұрын
You're unlikely to be able to boot from it though
@erk_0483Ай бұрын
@@richardnpaul_mob You could only get problems bootin from an nvme but a SATA m.2 could be used to boot like any other drive.
@cleanyclothАй бұрын
@@richardnpaul_mob You could always stick a boot loader on a USB drive. Clunky, but should work!
@zr0dfxАй бұрын
Mod the bios to boot from Nvme
@richardnpaul_mobАй бұрын
@@cleanycloth yeah I've seen that work
@AdaptiveSystemsАй бұрын
you hit the jackpot with this, generic nas cases are more than that, all you need is a nice little itx board, and some drives, and its go time....
@darknessbladesАй бұрын
Indeed. sadly with the video out people might now sell it at a higher price. since its now known you can use it as a NAS case
@herauthonАй бұрын
with a LSI SAS Controller to drive .. the drives ?
@racinggameschannelАй бұрын
Oh my god, i have the same designed desktop from that period when we got it in 2009, seeing a nas with that same look is wild!
@geoffmerrittАй бұрын
You could have a matching set!
@racinggameschannelАй бұрын
@@geoffmerritt not a bad idea, just a bit low on the priority list
@azmotorhead3614Ай бұрын
I miss Windows Home Server. When I was in the military I had a home server that I could use to access my media library at home while I was deployed overseas. It was awesome.
@kbhasiАй бұрын
From what I can tell, it may have been a commercial failure. Windows Home Server was based on Windows Server 2003 (≈ Windows XP) if I recall correctly, then there was Windows Home Server 2011 which was based on Windows Server 2008 R2 (≈ Windows 7) instead. From what I can tell on Wikipedia, Windows Server Essentials 2016 (≈ Windows 10 update 1607?) was kind of the last version to have features carried over from Windows Home Server.
@ironphilly2366Ай бұрын
some old systems don't have a bios screen I learned the hardway..
@lars2k1Ай бұрын
That hostname though.. "asspire" probably describes it best😂
@MrWachtus9 сағат бұрын
I had this NAS back in the day and absolutely loved it.
@ArunehАй бұрын
Windows Home Server was pretty darn cool for its time, you should try and explore it some day. Not useful at all today though.. My first homeserver was an HP EX475 and that thing ran for years before I replaced it. I still have it, but it runs Ubuntu now and is just for backups.
@djheartbreak831Ай бұрын
i got a similar HP server from FB Marketplace a few years ago but after finding out how outdated the hardware was, its just been living lifeless on my shelf. My hope is that there is a way to get a modern motherboard to replace the aging one and put new life into it. maybe HH will show how that can be done with his next video, at least for the Acer.
@zeroturn7091Ай бұрын
I was just about to buy 2016 until I saw this comment😭
@ArunehАй бұрын
@@djheartbreak831 The motherboard in the HP is much smaller than this Acer, so I don't think upgrading is realistic. Maybe you can shove a Raspberry Pi in there, but the backplane for the drives plug directly into the motherboard so it would be difficult to make it useful. This Acer seems easier since it's more standard parts.
@mikes78Ай бұрын
@@djheartbreak831 Well the HP Mediasmart ex49x servers are physically identical to the HP Datavault x510 except the former rums an AM2 Sempron single/limited option dual core cpu and the Datavault x510 uses LGA775 and has a dual core pentium cpu. The boards are direct swappable and there are plenty of examples of these, especially the AMD/Mediasmart variants on ebay.
@davidg5898Ай бұрын
Looking forward to your upgrade video to compare/contrast with my own modded H340. I use it as a test NAS -- trying settings/plugins/containers before deploying to my real NAS so I don't eff up the system I rely on! The upgraded H340 is a great little 4-bay NAS with such a tiny footprint. The bog standard ITX tray and flex PSU mount made it seems like it would be an easy upgrade. Splicing molex/SATA power connectors onto the original backplane connector was simple, too. The real "fun," as I'm sure your discovered, was decoding the proprietary pinouts -- and discovering that the backplane needs an extra +5V line (that I tapped from the new MB's USB headers). Unfortunately, some of the front panel functions are GPIO controlled, so those remain unavailable. Same with the individual drive LEDs unless you use an HBA card (I wish Acer made the LEDs come off the backplane instead of the MB, but they wanted to go all fancy with the bicolored LEDs to also give SMART status instead of just having simple activity LEDs).
@hateWinVistaАй бұрын
These ancient Atom processors predating Silvermont(J1900, N3150 etc) are somewhat useful if one is paranoid about CPU backdoors, as they don't even support out of order exceution and speculative execution. Though you would want something like D510 as you get 2x performance from dual core, which seems to finally arrive on H342. The case looks very tempting for modding, though flex atx power supply might be a PITA to manage.
@JasonCrosenАй бұрын
Nah, that case looks like it was damaged in shipping. Not an accidental hide from the seller.
@ItsJustElenoreАй бұрын
This looks super interesting for maybe swapping in an n100 board. Can't wait for the sequel!
@kekistanifreedomfighter4197Ай бұрын
Man I can't wait for the upgrade. For only $60 with a FlexATX psu, drive cages and backplane included that's an absolute STEAL for the case alone! I'd still be curious too if the poor atom CPU would be good for anything like a custom network switch or router with that PCIEx4 slot.
@charlesdoesmore5488Ай бұрын
I didn't realize Acer made an Aspire NAS.
@kbhasiАй бұрын
HP also made one, which they called MediaSmart Server.
@charlesdoesmore5488Ай бұрын
@@kbhasi Hmm, intresting
@JamesTenniswoodАй бұрын
I used to have one of these, loved that OS.
@TheOdog1970Ай бұрын
I loved my Windows home Server system back in the day. Was easy network storage and PC backups.
@wxfieldАй бұрын
Ironically enough, the Apollo Moon landing's computer was a mere 2.048 MHz with 32k words in RAM pales in comparison to the old NAS CPU. I say ironically because the date this video was released Apollo 11 was orbiting the moon getting ready to depart to the surface.
@fordonmekochgalenskaper5665Ай бұрын
Windows Home Server didn't support raid att all, it added all disks as a pool more like jbod, but it still was a interesting OS, I used it from release to eol but had a more powerful system, there was program so you could rip your cds and dvds if you had an optic drive, no need for monitor or keyboard, when you insert a CD, it automatically been riped and data downloaded, all settings done from client, then it just worked
@crazychicken2005Ай бұрын
This reminded me that I have a NAS from the early 2000's with 2TB worth in IDE hard drives. I am yet to get it working, but this video has given me what I need to see if I can make this massive rackmount NAS work as a NAS again!
@chrisa-wr2kwАй бұрын
Oh, I have one of these. I put in a 4th gen intel into it years ago. Had to splice in a wire off the backplane to one of the orange (3.3v?) lines on the atx connector for the backplane to function.
@MarcoGPUtuberАй бұрын
This NAS is old, but Hardware Haven brings youthful life to his projects!
@THEMRMURDER270Ай бұрын
Acer even sold servers with hot swappable drives. At a site i work they had one from 2003.
@jayjaytronics8358Ай бұрын
Ah how cool - the backplane needs a GND wire jumper to spin up the drives with a standard ITX mainboard (it has a proprietary plug to the original mainboard). I had one of these in 2015 and fitted it with an AMD Kabini based board (ASrock QC5000-ITX) that ran circles around the Atom hardware. It was nice and solid and didn't need a lot of power.
@MacLimitRangeКүн бұрын
The chassis is very good, i would just change everything, with a fanless N100 and a 3D print front.
@rascalwind10 күн бұрын
Fighting single thread problem. Most of what your doing is going to spend a lot of wall clock in task switching and if memory is limited it's swapping on top of it all. Doing something CLI would probably suit it best. Basic linux LVM raid with parity wouldn't be a huge problem if the parity is already done and then start copying files. Best option is to offload the raid to a card and let-r-rip
@Oliver_TV-yr6de24 күн бұрын
I bought my Acer H340 new at the time. I bought a used mainboard bundle and rebuilt it yesterday. GIGABYTE GA-H67N-USB3 with i5 Intel CPU. It works great.
@carlhannes14 күн бұрын
I actually got a hold of a HP MicroServer gen8 (I believe it's called?), also 4bay, with vga output and a full pcie x16 slot (although, pcie 2.0, but still). It was a mess to get to work properly but also got openmediavault on that one and a new drive for it, and it runs as a backup server for my parents :)
@ROFLMAOwithExtraCheese14 күн бұрын
I would put an Odroid H4 Plus in that thing: - fanless - low power consumption - has 4 SATA ports and an M.2 slot - supports In-band ECC using a normal SO-DIMM. - can hardware decode 4K UHD video.
@jarthursАй бұрын
I only recently pensioned off the older sibling of this the Acer Altos EasyStore from 2007, it was a great NAS for it's age.
@OllieHamonАй бұрын
I would love to see a 'How Fast Can I Make This NAS' video even if it means everything is new apart from the chassis
@Alan.livingstonАй бұрын
I still use a RPi 1 as a ssh gateway to my home network. There’s always a use for old hardware.
@omegatotalАй бұрын
I might still have one of these and I just recently acquired some older boards for cheap and might be able to mod the one that I have as well. The only downsides are the drive sleds have rubber isolation on their toolless pegs that degrades very fast, and the LEDs being very non-standard wiring
@lolololowbx280Ай бұрын
Try installing windows server 2016 headless and then add windows admin center?
@BrianThomasАй бұрын
Wow. This channel is growing fast. You're doing something right
@_Turbocat777Ай бұрын
I think the hunt for a nice compact NAS shell is what almost everyone is after without having to sacrifice drive space and/or gpu support. -can't wait to see the update on how you upgrade it.
@darkmasterch1ef346Ай бұрын
I buyed two of the Easystores in 2009. Still using them Today for Backups of Important Files. Have 4x2TB Drives inside. Only for Storing Datas its Good enough.
@V3racious3Ай бұрын
I found one of these Acer NASes in a thrift store still brand new in the box.
@NightHawkATLАй бұрын
Windows Home Server was all the rage back in 2008-2012 or so time-frame. I remember deploying a few for use in Home Theater setups to connect Windows Media Center (Vista) to for DVD access and actually copying the DVDs from the clients collection in raw format to the server. I had built my own WHS to learn with and got really good with it. It was nice for it's time and made Windows Media Center fun. A lot better than using a 200-disk Sony Vaio DVD Jukebox lol.
@Samppa1987Ай бұрын
I have something similiar but running an Asrock single corr 1.5ghz with 8gb ram, 2x2tb mirror, but with XigmaNAS since that seemed to work well with singlecore and has been working quite well for like 11 years.
@tnaxpwАй бұрын
As someone who struggled running "modern" things on N36L I can tell you that Unraid didn't want to run just due to hardware being old and "not compatible" in some way. I had the same issue with Proxmox and ESXI (I think it was 5 but can't remember now), but in the end I kinda ditched it into a wardrobe to think more about putting something like rpi5 with pci-e to backplane adapter or something.
@nullsmack15 күн бұрын
Those Atoms were probably some of the first versions available, no wonder it was so slow. tbh I figured you were going to go right into swapping out the motherboard but now I see you did that in another video, so I'm going to go watch that next.
@Francois_L_7933Ай бұрын
When you look at the price of small compact cases with more than 2 drive bays, it's very tempting to get one of those.
@livingintthenewrenaissanceАй бұрын
Had one of these new, loved it. WHS was great on it, and the experience was good enough that I wanted to do it again. Got another of these recently, and found the same video you did. Found the jumper and got a video card installed (a slight update on the one he recommended). The original motherboard was apparently pegged at 2GB max for RAM and WHS had the limit of 8TB total. To get Unraid running, I had to disable all booting options except the USB drive, and only a couple of USB drives would work anyways. But have Unraid running the NAS, and two Docker containers with Iventoy and a hard drive file manager. And those aren’t autostart because things seem to get unstable if I run out that way. But now, it’s handling the NAS for a Home Assistant Green box where I have everything else I was hoping to run on the Acer.
@lemagreengreenАй бұрын
Oh yeah, good tip! had no idea these existed, they're prime for bringing up to date.
@SP-ny1fkАй бұрын
A better bet might be to see case designers build cases for mini-itx boards so that people can install 4+ drives on using something like the n100 to power it all. The appetite for small form factor home servers / Nas is growing, and case manufacturers are really dropping the ball here.
@tofush0eАй бұрын
I think there's a button on the edge of the board that engages when you slide the tray into its assembled position.
@craigprocter1232Ай бұрын
looks like fairly common hardware for NAS systems of that age - I still have 3x HP N36l microservers (AMD Athlon II Neo N36L (1.3 Ghz), 1GB NIC, PCI 2.0 expansion slot) in use as NAS boxes and they work extremely well even after 10+ years of use.
@jburnashАй бұрын
This was fun. On the one hand - a somewhat predictable outcome given the age and spec of the system. On the other hand - I"ve been in the IT business for a LONG time and *I* had *also* not heard of "Windows Home Server" 😄 For me, one of the great things about *you* doing these kinds of exploration of old hardware means ... I don't have to ... which makes my lovely wife very happy!
@Mihai-Marian-CenusaАй бұрын
Hy, I was able to buy a identical case! I'm planning to build something based on n100 SOC motherboard. The SATA backplane can be turn on by shorting some wires on the header...I'm sure you figure out already! Wish you the best!!
@gregoryreimer869Ай бұрын
Well I can't wait to see if you ran into the same issues I did modifying that thing. New power supply, modified power cable for the back plane. Slightly modified power on back plane(if I recall that was to try and prevent an issue people were talking about online where the back plane wouldn't work with other boards but it's been a hot minute. I just found that there was one point that had a missing voltage and fixed that, not totally sure if it was needed but it's not hurting at least). I still haven't gotten around to making the front panel working. so it's just a different rigged up button for power right now and no indicates(nothing quite as permanent as a temporary fix I guess). Oh and a new fan and an SSD crammed inside the case for the OS. It's stupid tight but it works great.
@bersissevimli15884 күн бұрын
<a href="#" class="seekto" data-time="465">7:45</a> it was definitely cpu's Fault I have a old laptop that has usb 2.0 ports but debian installs just fine and pretty fast
@Fractal_32Ай бұрын
<a href="#" class="seekto" data-time="630">10:30</a> you can use ZFS on Debian by enabling the backports repository (and a tiny bit of terminal input), I don’t think you would want to use ZFS with this system but you could.
@RafaGmodАй бұрын
don't know if somebody pointed this, but it have a tack swith in the back of the board, near the fan header. Maybe thats a "intrusions detections" and the system only post with the tray in the slot (of with the button pressed). Just a tought
@bobdole62846Ай бұрын
i bought one of these a few years ago for 30 dollars, I dumped the Atom Motherboard and shoved in a Ryzen 2700x downclocked as a File and VM server, all running off the original PSU. Solid little case, I might bring it out of storage and put in a super low power Intel Atom N95 motherboard or something when they get cheaper
@joezep2154Ай бұрын
I considered upgrading the hardware as well, I originally installed OMV (blindly) and of course, found it dreadfully slow But for those of you who have one of these lying around (better yet, the H342 iteration) or can find it cheap online, I have a suggestion for it that is both simple and useful Put the jumper in, leave an empty hard drive in it and boot a USB of the latest Daphile ISO The machine booted without fuss, opening the web interface worked first try and the install can be copied from that initial USB boot and further setup can continue from the single hard drive you put in Make sure said drive is "Clean", no partition or format information so that the Daphile installer will handle it The resulting system can be used to pipe music throughout your home using LMS/Squeezelite devices and has adequate performance to even be a very light file server, for your music files Lots of limitations, but a sound use case for the potato class hardware The fact I have mp3s, flacs and even backups of DVD ISOs on the 4 drives (can add a 5th to the e-sata port too) makes it a fairly low hydro powered server for an audio server
@grahamleiper1538Ай бұрын
Really liked WHS back in the day. You could duplicate important stuff over several drives, it backed up all your PCs locally, and if it died, the hard drives could be read normally on any PC as they were just NTFS formatted. Commercial flop but the people who got it generally liked it. Replaced my homebuilt 11 drive WHS box with a FreeNAS build when WHS lost support. Nowhere near the same level of friendly interface and can't just throw in another hard drive, but considerably faster.
@thelittlecousin5211Ай бұрын
The main-board seems to have a small switch on it's side, which may be a security in case you remove the motherboard from the case and slides it out, holding this should in theory allow you to turn the unit on.
@ryuzakisamaАй бұрын
Oh man... I had this exact same NAS back in the days. Quite glad I don't have it anymore. 😂
@roysigurdkarlsbakk3842Ай бұрын
I know some old(?) NAS-es uses a small set of mirrors for the root and then RAID-something for the data. You just make a set of partitions for the root, each big enough to hold what's needed and then make a RAID-1 spanning all of them. Then a new partition on each drive for the data. I beleive those I've seen (like QNAP) places the root directly on the RAID-1. I'd rather use LVM in this case to easily separate out the swap. Then the same with the data volume. This will obviously make the rootfs slower than on an ssd, but it'll give you redundancy. I guess you'll have to stick to debian or something instead of openmediavault for this, though.
@radiantfairy4079Ай бұрын
I found a listing of QNAP TS-469 Pro with 4 x 3TB WD Red for US$260. The OS needs to be updated. Should I get it? I guess what's holding me is the thought that it's more or less 10yrs old. What do you think?
@KS-wr8ubАй бұрын
I have an old QNAP TS-451 sitting in pieces on my desk as I’m trying to make something useful out of it. Found it for very cheap on Marketplace like a week ago and thought it might be worth it to try and utilize it as an extra off site backup. I already have my old HP Microserver N40L as an offsite backup but you can’t have enough backups… 😅 I’m first going to try and flash Alpine Linux onto the eUSB DOM that the QNAP OS lived on, but since it’s only 512 MB it needs to be a quite minimal install. Alpine is great since it can run in RAM. With MergerFS and SnapRAID it should be useful enough for backup. If that doesn’t work out I’m plugging in a USB header adapter instead of the DOM and shoehorn in a USB to SATA SSD somewhere. Then I’ll have more options for OS. Either TrueNAS or OMV then. But I really do like Alpine so my suggestion is to try that! You won’t get a UI but it’s simple enough in the CLI. 👍
@MajorOutageАй бұрын
Fun fact: Despite being Hyperthreaded, this generation of Atom CPUs lack Out-of-Order execution. Which is great for package size and power savings, but not for performance. So glad I at least had the 330, which is dual-core. Also, the i945 (?) chipset uses more power than the CPU. Mine has a passive heatsink on the CPU and a fan on the chipset!
@TheRogueBroАй бұрын
I actually have one of these. I had to use a PCIE cable to get a card working as well. I installed a few OS's on it including Windows and CasaOS. I settled on Windows 10 booting off a USB. I was going to give it to my mom to use for her home business, but she ended up not wanting it. So it's just sitting in my garage in a box again.
@TheRogueBroАй бұрын
These are so weak, they are really only good for file storage and that's really it.
@abunk8691Ай бұрын
I'll be waiting for the sequel as I'm sonewhat interested in SATA backplanes in boxes for a DIY NAS setup
@LuminousWatcherАй бұрын
My HP proliant N54L with a dual core CPU and four drivebays and an internal USB slot till serves me well - It would be less painful than this.
@1slotmechАй бұрын
I'd be willing to bet there's a chassis intrusion detect switch on the mb somewhere (maybe even built into the front panel connector harness..?) that you overlooked.
@alexander0the0grayАй бұрын
This NAS is 100% more usable than any storage servers that were running crowd strike today
@marcogenovesi8570Ай бұрын
<a href="#" class="seekto" data-time="575">9:35</a> I think that means they are compiling their kernel with support for CPU features that the Atom 230 does not have, which makes sense since they were cut down even when new. I had similar issues trying to boot a Debian 32bit kernel compiled with PAE on an ancient Geode processor that is 32bit without PAE. Black screen with cursor like that after boot, no error no anything. Had to boot the image from another PC to install the 32bit kernel. This can't be done on Unraid.
@Sam_KochАй бұрын
The ASUS Prime N100I-D is the perfect upgrade for this! I'd love to see what you ended up using inside.
@SaazmАй бұрын
Remember the early WHS ones built like a NAS. Was more or less a striped down Windows Server with apps. Acer's was more or less identical with Lenovo's Idea Centre, same on the inside but Lenovo's Idea Centre at least looked a bit better.
@Viking8888Ай бұрын
A Zima board would make a good replacement for that old motherboard. It has the PCI-e slot which you could connect to the backplane with a riser cable. You'd just need to mount it somehow so the ports would be accessible from the back. A 3D printed IO shield perhaps. I'm sure TrueNAS would run on it. Maybe even AuxXxilium Arc Loader for a Synology experience (It's a github project I've been using on older hardware).
@stephenreaves3205Ай бұрын
why did you dismiss zfs/truenas so fast? I would love to see how it handles this hardware! ZFS will use as much memory as you give it, but it typically doesn't require much
@DragonhengАй бұрын
Now we are looking for a good ITX mainboard and a CPU with an integrated graphics card that can be cooled passively. Or can use a small cooler.
@ich777Ай бұрын
I can‘t quiet remember what I did with Unraid to get it working on the stock motherboard but I think you have to use legacy boot and make sure the USB device is ready to use it.
@ShoaibChaudaryАй бұрын
I wish people sell these kind of things in my country as well.
@cerveraoliverАй бұрын
I'm happy you finally gave OMV a shot! You could have installed it on a USB stick and use all of your bays for storage but I'm not sure how long it would take to boot with those USB 2.0 speeds😅 Yeah, you have to "apply" every change on OMV but on a modern system it only takes a couple of seconds though
@YandarvalАй бұрын
Now, as it looks like a standard mobo. A modern board may fit. Chassis's are silly prices these days. A fan replacement or new PSU and you may be golden for a PCIe equipped NAS chassis.
@gamecuber6Ай бұрын
could you please do a video on a 2-Bay D-Link ShareCenter NAS? they used to be some of the cheapest NASs available on the market about 10 years ago
@Marten_ZeugАй бұрын
I have a acer NAS so old, that the filesystem isn't even on Windows. The encryption is on the first gen, and Windows 10 only Supports gen 2 and 3.. It has 4 bays, I got it for free, and I think the hardware broke on me.. It came with 2 180GB drives. Software was by acer, and not upgradebale, it had no USB-Interface, no Displayoutput, just a really old NAS!
@HetSheАй бұрын
maybe try XPEnology DSM 6.x? very light
@daved9665Ай бұрын
Don't worry about "being judged." Just showing 'what ya gotta do' is great to see. Wondering - Don't NAS need much more RAM to help transfer speeds to disk?
@win7bestАй бұрын
id get it just for the astetic. also my acer aspire R3300 would probably make a better nas, atleast in hardware terms because it cant connect more then one hdd. <a href="#" class="seekto" data-time="294">4:54</a> i asume the dent is from shipping since there is no absolutely no bend in that image <a href="#" class="seekto" data-time="389">6:29</a> there is probably a button or connector at the back that detect if it in the case
@SDogoАй бұрын
I wouldn't give a 1$ for that MB... But the chasis with the sata backplane and stuff is perfect for a really modern nas. I'll be waiting for that video.
@marcogenovesi8570Ай бұрын
<a href="#" class="seekto" data-time="474">7:54</a> haha "asspire" that's a fitting name for it.
@gearboxworks4 күн бұрын
Sorry. I can't even. You have been judged. 🤣
@markkoops2611Ай бұрын
Windows home server used drive expander, similar to unraid, it combined drives regardless of capacity...
@ogrooster69Ай бұрын
Would love to see an SOC itx board go in this or another itx board that supports possibly sodimm. I did an experiment with a Datto chassis that took mini itx and spent way more money than I should have on ultra low profile DDR4 dimms just to get a newer cpu than the gen4 i5 it shipped with
@plagosusАй бұрын
Is there an "open case" switch that blocks the boot if nor pressed? That's pretty common on SFFs.
@plagosusАй бұрын
Also, have you plugged the 2.5" drive into the correct SATA port, as it may have to be the last one on the bottom (PhysicalDisk 0) as it may be the requirement for the Windows Home Server? You can list it using "wmic diskdrive list" or "compmgmt.msc" and list drives there (but this is only from GUI).
@user-qh3lr4wp6mАй бұрын
I think every TechTuber has that logitech keyboard. It's everywhere, even I have one.
@LouisSubearthАй бұрын
Looking forward to seeing it modified with a newer motherboard and components.
@howardrider7272Ай бұрын
I've got a set of the original system restore disks. If you need some ISOs let me know. I had two of these. One dies a few years ago. The second has a failed PSU.
@plasmar1Ай бұрын
I have one; it's okish; probably best to use with truenas and iscsi(as a 4 bay iscsi enclosure)...... things to know: 1) it has an onboard header for vga, ps/2,etc(diy proably required or the route i took) 2) as this was first gen x64 atom it's a 230,945GC chipset, this is only sata2!(it's slow) 3) lenovo has a model of the same unit with a diff faceplate 4) I slic2.1 modded mine:P..... 5) the esata controller is trash, I modded mine to be usable for the system drive but it was unstable 6) H1110 HBA is probably a good fit and would bring it up to SATA3 ** will be interested to watch the follow up as I did initially try to upgrade mine but bailed at the first sign of trouble(didn't have enough incentive:P)
@richardnpaul_mobАй бұрын
I suspect that you needed to create a usb disk with MBR (as someone else noted legacy boot mode), you may also have needed to work through FAT, FAT16 before trying FAT32 😬😁
@ghostbaleadaАй бұрын
I think since you only wanted it to be a NAS maybe something like XigmaNAS would work better to give BSD some love
@kalpamonxАй бұрын
you can tell it was from that era because of the PS3 Spiderman 3 font