Briggs and Stratton, along with Craftsman Mowers, produce a powerhouse easy enough for our DIY Rookie, Beau Hudak, to assemble.
Пікірлер: 77
@ashiqmomin19208 ай бұрын
Lightweight is good and what did I use it for it’s a lawnmower kzbin.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.
@user-sf4mi2pe5h Жыл бұрын
Thank you, for the help, once I pulled the handle out all the way and tightened the two bolts back into place, I was able to pull the string and the mower started right up. :)
@mariah71144 жыл бұрын
Thanks! I didn't do the starter rope step. This was quick and helpful!
@kendalmyers94454 жыл бұрын
Thanks man👍. This video helped me to install my Craftsman M250.
@michaelt93565 жыл бұрын
has trouble with the side discharge part of the installation. went to the craftsman site to for help. But this video explained it very well. thank you.
@howlathemoon2128 жыл бұрын
I like a guy who knows a lot, but thinks like the novice. Great video.
@melissav785 жыл бұрын
Thank you this helps a lot!
@trizcedano16907 жыл бұрын
Did you empty all the oil from the bottle that came with the box?
@keliiwilliams81427 жыл бұрын
what do I do when the pull string won't release to start ?
@dayaneriesq4 жыл бұрын
Exactly what has happened with my new lawn mower - the recoil starter does not release 😣
@bsquire14 жыл бұрын
It's the handle. Turn the 2 black dials till they come out and pull up the handle.
@brittanybeauty9164 жыл бұрын
bsquire1 what handle?
@redactedxx42194 жыл бұрын
Solution. I had the same issue. I have the m210 and wasn't able to pull the cord out to the ring. It's the handle. There are two black twist screws near the rear wheels that are to adjust the handle length. It can't be the length it came out of the box in because I think that's just for storage. You need to take those out and extend the handle bar longer, and put the screws it. Now pull back the blade control handle and the cord should pull right out!
@burningrabbitacres83304 жыл бұрын
@@dayaneriesq so, what did you do beside frown? This happened to us.
@HackedAnotherAcct4 жыл бұрын
THanks you so much for the open the box part I thought it just hatches out like a Jurassic park dinosaur egg also the intro was very entertaining too great script especially the part where the fly lands on your hair!!!
@ykamkdam51035 жыл бұрын
Thank that’s was helpful first time bought mower 😂😂😂😁😁😁
@dayaneriesq4 жыл бұрын
How to release starter cord if stucked: I figured it out. So when assembling the handle pull the handle bar up til the 2nd screw hole then reattach the T bolt. When handle is left at the 1st screw hole it prevents the blade at bottom of mower from turning which prevents the starter cord from releasing. I'm so PROUD of myself!😄
@mwaimandiwa36726 жыл бұрын
u the real mvp
@BackyardWoodworking9 жыл бұрын
Looks just like my Troy Built mower.
@halfthe7 жыл бұрын
Nah dude this thing got a big 'ol 7.25 American engine
@charles71647 жыл бұрын
What's the bolts name or size and the thing that tighten it ( time 1.01) I lost mine because i didn't put it properly
@jahidulislammaruf07265 жыл бұрын
Love it
@lindawells52075 жыл бұрын
9/1/18 - I bought this lawnmower from Sears May 2018, and already the self propelled wheels stopped working!!!! I'm VERY disappointed. I have no idea why because the mower is only 4 months old. Has anyone else had this problem, and if so...how did you fix it?
@jimiguitar63244 жыл бұрын
The Viper and Honda Engines are the very best
@poorringo7 жыл бұрын
Can someone please help me, I need a blade adjuster for a 126T02-0782-B1. I bought a universal from Lowes but it's too small. What is the product #?
@geop.72788 жыл бұрын
Good Camera work.
@diannashebora2451 Жыл бұрын
Was it u? Lolol
@alquint29684 жыл бұрын
thanks!
@BlondeExplorer16 жыл бұрын
I bought this same mower 2 years ago. The gas cap is crap and continued to fall off until I finally ran it over. I have looked all over online and yes at sears.com and no one has the gas caps....any thoughts? Checked ebay as well.
@nicholas84795 жыл бұрын
BlondeExplorer1 where did you finally find one?
@christianduarte52916 жыл бұрын
What’s the specific name of this model and model number?
@Aaron-el5zj4 жыл бұрын
Why didn’t u show u starting it
@berniehall9599 Жыл бұрын
How to adjust drive control on, craftsman 220
@haroldtorres27107 жыл бұрын
Where is a Gas button to start before you start pushing and going?
@tibblesss4 жыл бұрын
how do I clean it?
@williammotley80864 жыл бұрын
It would be nice to know what Craftsman model this is. M210? M230? M250? M260?
@ransompendragon623 Жыл бұрын
It’s the 10000 series
@lauracampa7837 жыл бұрын
thank you . instruction manuels are useless. I didn't know wear exactly the bolts went
@iamlegend00004 жыл бұрын
Wow... I'm a noob and I wanted to see how u start this thing. U cut that right out when it mattered lol.
@dayaneriesq4 жыл бұрын
How to release starter cord if stucked: I figured it out. So when assembling the handle pull the handle bar up til the 2nd screw hole then reattach the T bolt. When handle is left at the 1st screw hole it prevents the blade at bottom of mower from turning which prevents the starter cord from releasing.
@joshuadelatorre7145 жыл бұрын
Can get the starter cable out for the life of me
@dayaneriesq4 жыл бұрын
I was going mayhem trying to figure out what was wrong 😂 Hope you figured it out.
@speakerdude10004 жыл бұрын
I feel you
@brittanybeauty9164 жыл бұрын
I can’t get it out here
@brittanybeauty9164 жыл бұрын
Either**
@jasxaf4 жыл бұрын
for the reference of other poor souls trying to pull the starter cable up: the handle needs to be pulled out. loosen the bottom set of pins, pull the handle straight up to the second set of holes and refasten. the starter cable will then release.
@lawrencelanier75855 жыл бұрын
At 1:17. I can't get the starter rope to budge.
@deb86775 жыл бұрын
Me either, no help anywhere
@andrewhurley41355 жыл бұрын
You need to squeeze the top blade control bar down and then slowly pull the rope. He did not do this in the video but it should do the trick. See page 8/step 7 here pdf.lowes.com/useandcareguides/043033587520_use.pdf?_gl=1*1fs4feh*_gcl_aw*R0NMLjE1NjA0NzkwMTUuQ2owS0NRanc2SWZvQlJDaUFSSXNBRjZxMDZ0bFJGMjk0Y1pqWUdVcEJGRmI2dFBVQVY2WnNKY0VnT25RMkZnU1p6VUFNYzh1eE02c0UxVWFBcTA0RUFMd193Y0I.
@dayaneriesq4 жыл бұрын
I've tried the steps; holding the blade control control against upper handle and slowly pull starter rope handle from engine BUT it does not release. I knew I should've went with a rider mower
@dayaneriesq4 жыл бұрын
I know the post/comments are from 3 months ago. But I figured it out. So when assembling the handle pull the handle bar up til the 2nd screw hole then reattached the T bolt. When handle is left at the 1st screw hole it prevents the blade at bottom of mower from turning which prevents the started cord from releasing. I'm so PROUD of myself😄
@birdog234 жыл бұрын
Day Q I’m not sure what you mean but on ours the cord doesn’t pull. It’s stuck. Gotta take it back
@cleancarburetor4 жыл бұрын
When Briggs doesn't start get your GumBuster kit at www.cleancarburetor.com
@austinearly16758 жыл бұрын
Who needs instructions
@jlologil5 жыл бұрын
me
@jairocarrion623 Жыл бұрын
Hello
@AllThingsComplex7 жыл бұрын
The music is really distracting.
@user-tk7xt3wq8r7 ай бұрын
1:15
@andybub455 жыл бұрын
Piece of crap. You cannot trust the newer briggs! Spend money for a good Honda.
@thatdonnyguy5 жыл бұрын
I'm actually switching from a Honda to a Briggs. Tried a carb kit, then bought a OEM Honda carb, no joy, not getting fuel. The gasket layout is huge pain in the butt and I've put that back together for the last time.
@justindoel17645 жыл бұрын
He is talking about the new Plastic Junk carburetor engines