Briggs and Stratton Engine Rebuild - Getting the Locked Up Engine Running Again! | Part 3

[@RaleysSmallEngines]

Part 1 Video Link kzbin.info/www/bejne/f6mch6xphNKan7Msi=8hBPeJnWEptD3rC5 Part 2 Video Link kzbin.info/www/bejne/bXWZc2uLbatlrqcsi=7lTLfNhojhed2Us9 T-bone After Hours Channel Link www.youtube.com/@T-BoneAfterhours

[@harrytackett1645]

T bone, you make it look so easy. If had carted that start up attempt of the engine, I would had it chasing me around the shop breaking everything.

[@Andy-nm9dw]

I love the care free attitude and also tempered with attention to detail as you work. Thank you for sharing.

[@DustyRusty81]

another one in the books

[@jeffdavis5704]

That didn't take long to put back together, good content T-Bone

[@daletustison8550]

Thank You. You explained it very well. It is not new to me, Mostly. So I know. Thanks again. All the important parts covered very well.

[@RaleysSmallEngines]

You're welcome, glad you enjoyed the video!

[@tinkeringtaylor3053]

Excellent rebuild sounds really good T-Bone 👍👍, Hi Mrs T-Bone 👋👋

[@RaleysSmallEngines]

Thank you, glad you enjoyed it 😊

[@Mrs.T-bone]

Hey Mr Taylor! 😊

[@mr1pearl]

Put that thing on wheels its about to drive right out the shop 😅😂 weeeeeee 😄 Man T_Bone thats what I call fun !!!

[@MikefromMOMichaelTurner227]

Well done my friend 😊 back in the old days we rerung our push mowers every couple of years. Enjoyed watching you!!!

[@TheRustyRooster]

Woo-hoo it's alive Jack Rabbit..... I chose this repair over the replacement. Great job

[@RaleysSmallEngines]

Thanks Rooster, we aim to please my friend.

[@shoeshow1999]

That was a beautiful sound when that engine started. Thanks for the video

[@robcole332]

Man it would be so fun working with you. Great video. Hi Mrs T. Great job on the videoing

[@Mrs.T-bone]

👋🏻🙂

[@glennhorne7789]

You do good work. Love watching both your channels

[@RaleysSmallEngines]

Thanks! I appreciate it. You are Awesome !

[@Gears.and.Gadgets]

Great work. Nice music too.

[@mbg238]

Good Work.

[@mouseyou12]

Nice job we have to save all the old stuff new is junk.

[@RaleysSmallEngines]

Goth that right.

[@bigteeist]

Great job this is better than anything on tv👍🏿

[@RaleysSmallEngines]

Wow, thank you

[@joseluislopez1978]

Thanks T Bone Good 👍 videos

[@nevinunderwood2019]

Excellent work T Bone … yes it’s that easy … I can do that too …❤ you are The Man 😎

[@nevinunderwood2019]

I also noticed the intake gasket plate if I opened that up will I get more HP out of my motor ..??? Please reply with your answer … Thanks me T Bone 😊🇨🇦

[@Lovinflyindrones2022]

That was Smart showing the hickey madoo compression release thingey ma bob thingey before closing it up

[@RaleysSmallEngines]

Thank you, had to show the what cha ma call it. lol

[@WherestheKaboom-g2p]

Taryl fixes all, calls those little notes. Love 💕 letters from the manufacturer.

[@RaleysSmallEngines]

Yep, the love notes. LOL Thanks for watching and commenting my friend.

[@massey35]

Good video, I would have wraped a tiedown strap around motor and stand, and it runs great, cheers & Happy New Year

[@Mrs.T-bone]

Happy New Year to you too! 🎉

[@mikecreasman6573]

Good job

[@Lovinflyindrones2022]

Thanks for using the Gasket on the valve cover so we could have a video sooner. Everyone give Mrs TBone a shout out. Thanks Mrs TBone

[@RaleysSmallEngines]

You got it! I love the support you guys give my wonderful wife, she's the best.

[@Mrs.T-bone]

Thank you my lovely youtube family! Y'all rock! 😊

[@Lovinflyindrones2022]

@@RaleysSmallEngines yeah She is the best of the BEST

[@mikebrooka9395]

Assembly lube, try trans prep or equivalent. Mikel

[@dmcarpenter2470]

Tbone, that is glorious. I have heard of bench running, but never dolly running. I think you invented something new.

[@RaleysSmallEngines]

😂😄

[@jerrymullins4962]

Good job T

[@jonyoung6405]

Been using Jacks Small Engine parts for 20 years . But just tried Parts Tree for hard to get Snapper parts , shipped was cheaper and faster.

[@mdbmdb001]

Love them Snappers! Put a good 15.5 hp intek on my 28” this summer.

[@matthewwearsch242]

I like the rebuilt engine because it has soul now.

[@lmfarms4611]

I'm sure you have tried everything to put the rod bolts in, but what about a racket wrench that would fit an allen bit in it or a quarter racket with an Allen bit in it. Great build.

[@Mrs.T-bone]

Good idea!

[@Pete.Ty1]

👍👍👍. Thank you

[@rauljr9869]

Love this video much than the one where engine was replaced, this is more in depth and detailed in every step to "repairing" the engine. Great work and thanks Mrs. T for the quality camera work! Keep them coming.

[@RaleysSmallEngines]

Thank you, I'm glad you enjoyed it!

[@Mrs.T-bone]

Thanks Raul!😊

[@joelbooth9523]

You are awesome T-Bone! Very much enjoy all your videos…. Also like your “After Hours” channel too 👍

[@jameslarsen3184]

Good morning, Merry Christmas and a Happy New Year!

[@Mrs.T-bone]

Merry Christmas! 🎄 Wishing you blessings for the coming year! 🎉

[@Lovinflyindrones2022]

Thanks TBone for doing both repairs. T Bone Rocks

[@RaleysSmallEngines]

Glad you liked it my friend! You ROCK ! my friend for watching and commenting.

[@joanwilliams3221]

That was so cool to see that engine fire up great job T-Bone 👍

[@dwanerusselburg7435]

That engine looks good t bone

[@Lovinflyindrones2022]

Did Mrs T order that piston with the PINK CLIP. DID IT HAVE A LOVE NOTE WITH IT AS TARYL ALWAYS SAYS. DEAR T BONE OR MRS T BONE HERE IS THE PISTON U ORDERED WITH THE PINK CLIP 😅😅😅 GREAT VIDEO AS ALWAYS

[@RaleysSmallEngines]

LOL

[@dkupy100]

Thank you Papa T-Bone. That was fun.

[@mouseyou12]

Nice job we have to save all the old stuff new stuff is junk.

[@RaleysSmallEngines]

Got that right

[@garyclark1135]

Thanks T-bone!

[@rsoyars]

T-Bone you are the most entertaining and knowledgeable of all I watch. Love to watch you

[@RaleysSmallEngines]

Thank you so much my friend. Comments like yours help us so much wanting to make the best content we can for you and all our viewers.

[@EnthusiasticTruck-xh7ss]

Awesome video thank you for the video

[@Lovinflyindrones2022]

Love these repair video's. Love em all

[@RaleysSmallEngines]

Thanks for watching!

[@williammoore2417]

Thank you for doing all three videos very informative and I enjoy watching thank you

[@RaleysSmallEngines]

I'm glad you enjoyed the series. There may be one more to go with the junk zero turn, we will see. Thanks so much for watching and commenting my friend.

[@covishen]

That was fun to watch. THANK YOU!!

[@RaleysSmallEngines]

Glad you liked it my friend, stay tuned, more to come.

[@watermanone7567]

Good work, thanks for the video

[@deronhogans1786]

You really taught me how to fix small engines. Currently looking for a engine to rebuild and fix like you did

[@mouseyou12]

Thank you for the come back.

[@Lovinflyindrones2022]

I always LOVE GETTING THE NOTIFICATION THAT RALEY'S SMALL ENGINE REPAIR HAS A NEW VIDEO. I LOVE YOUR VIDEOS AS U CAN PROBABLY TELL By NOW. IVE LEARNED SO MUCH FROM WATCHING YOUR GREAT GET TO THE POINT VIDEOS. I REMEMBER U SAING CARE FULL VISUAL INSPECTION. THAT SOLVES THE PROBLEM A LOT OF TIMES. CAREFUL VISUAL INSPECTION. THANKS T BONE MY GOOD FRIEND. Do u remember saying that. CAREFUL VISUAL INSPECTION. IT HELPS

[@RaleysSmallEngines]

You are right on the money my friend! Careful visual inspection is key.

[@jurijsbolakins8928]

👍👍👍👍👍

[@Coptergirljs]

You should take it and make one of those little remote lawn mowers; of course this one would be a gas one not electric!

[@Big_Johns]

Nice job T-bone, it'll live to mow another day. 👍 Hey Mrs T-Bone 👋

[@RaleysSmallEngines]

Thanks! Glad you enjoyed the video.

[@Big_Johns]

I always do brother, very informative. 👍🏼

[@Mrs.T-bone]

Hey hey 😊

[@Big_Johns]

🙂👋🏼

[@gary-e4c]

if someone has a small yard that will be good mower for them

[@Tsers87]

Perfect video well done

[@RaleysSmallEngines]

Thank you my friend, I'm glad you enjoyed it!

[@wilburnmiller1851]

Great job

[@RaleysSmallEngines]

Thanks, I'm glad you enjoyed the series!

[@cappyone2]

Good job. I enjoyed it

[@Lovinflyindrones2022]

Hey why not refurb the zero turn mower after getting engine on it

[@RaleysSmallEngines]

That's a possibility. Great comment my friend, thank you.

[@jdubya54]

I missed you putting oil in it

[@Mike-vt6is]

I just use a cut can and some zip ties works good

[@kennethtephabock5634]

Love your videos tbone

[@RaleysSmallEngines]

Thank you my friend.

[@rodneywaller532]

Great video series, but I believe you put the valve cover on upside down.

[@RaleysSmallEngines]

😅 yep, you are correct. I will flip it around. Thank you, great comment my friend.

[@Mrs.T-bone]

Good eye Rodney! We will fix it, Thanks!😊

[@norris.7670]

👍

[@billsimpson604]

Another mistake you DIY folks want to avoid is to put a dry rubber seal against a dry shaft. The seal will wear out prematurely, especially on the oil seals at the end of vehicle axles which often have 2 sealing surfaces. Make sure the axle has oil on it at the outer end, where the oil seal rides as you slip it into the differential spline. Wipe a little oil on the axle and on the rubber seal. If the tag on the differential says use synthetic gear oil, do NOT fill it with stinky crude oil based gear oil.

[@jdretiree2433]

15:00 they did come up with a better design...it's called plastic

[@thomasphilhower1400]

Did I miss it what was the cost of parts for the rebuild? And the price of the new engine?

[@RaleysSmallEngines]

Thanks for commenting, that was in Part 1. Link for that is the video description and in the first comment.

[@shoeshow1999]

TBone I have never had an impact driver but would like to own one. Can you suggest one for casual use?

[@Mrs.T-bone]

We use Dewalt but there are a lot of good ones out there.

[@Lovinflyindrones2022]

How much did it cost u to rebuild the engine T Bone??? How much would it cost a Customer if u had to rebuild the engine exactly what u dix to this one ??? U dont have to give exact figures if u don't want to mate TBone

[@RaleysSmallEngines]

Personally I spent about $100 bucks. Huge difference if i did it for a customer. The entire thing would have been cleaned like new and every spec checked. So so much more time involved that I would have suggested to them to replace the engine.

[@Lovinflyindrones2022]

@RaleysSmallEngines I know u would do it right. You're very professional my friend

[@gilliland426]

if you aint bleeding you aint been working!

[@RaleysSmallEngines]

😂Got that right my friend.

[@philliphall5198]

Flip the valve cover

[@Mrs.T-bone]

Do you catch everything Phillip? 😅 Thankfully he used a gasket and will he an easy fix 😊

[@RaleysSmallEngines]

Good eye my friend. I will flip it around. Thank you for watching and commenting.

[@philliphall5198]

It’s what I do for living, rebuilding these engines and shop Started at 14/ now 73

[@paulboomer7109]

Clean your bench.

[@Lovinflyindrones2022]

TBone is the Best at explaining everything. Hey everyone hit the Like button and SUBSCRIBE BUTTON IF U HAVEN'T ALREADY. ITS FREE MATES. AND IT HELPS KZbin TO PROMOTE THE GREAT CHANNEL WITH OTHERS

[@RaleysSmallEngines]

Wow, thanks for your kind words my friend, it means a lot to us.

[@Mrs.T-bone]

Thank you! 😊

[@troy77632]

👍