it is so hard to find such channels that show steps and tools needed for certain jobs like this one, subcribed.
@britishcustoms Жыл бұрын
Appreciate that! and we're always open to feedback so if there's anything you want to see, let us know and we'll look into making it happen.
@JohnCunningham-sy5ug8 ай бұрын
Watching your video was like hanging with my best friend working on our bikes thanks . I did same mods to my 2011 thruxton that I purchased used sans turn signals. Brit customs are top shelf parts I thoughly endorse. The music the cans produce are second to none the fender elimination kit is the boss I roll into bike nite everyone by pass the HD. And circle thanks for the cool pieces. By the way I'm 68 owned @ 30 bikes This Triumph is the best constructed bike I've owned. Two wheels are fun.
@britishcustoms8 ай бұрын
Right on! Thanks so much for the feedback.
@19762002bmw Жыл бұрын
Well done! Thanks for walking us through each and every detail!
@britishcustoms Жыл бұрын
Thanks for watching!
@rolandharrison579 Жыл бұрын
Great to see how this is done! Thanks. Looks Great with the mods.
@britishcustoms Жыл бұрын
We had a difficult time modifying it at first as it's such a beautiful bike so the goal was to elevate the look rather than redesigning the thing! Thanks for the support!
@colinr7670 Жыл бұрын
Sounds fantastic...
@britishcustoms Жыл бұрын
Thanks!
@daneillouis4435 Жыл бұрын
굿 좝 ~~ 브로 Good job👍
@TheRicosauve Жыл бұрын
Excellent video...thanks for taking us through the process with great detail. So much better than most videos...question. How would you install Motogadget Mo.Blaze Disc turn signal when the bar end insert appears to be held in place by a pin that won't remove? I've seen lots of Thruxtons with these signals installed but don't know how that could be. Would really appreciate how it can be done...unless I'm missing a simple way to remove the pin and release insert.
@britishcustoms Жыл бұрын
Thanks for the feedback! If you're talking about stock handlebars, that bar end insert is fixed into the handlebars and one way around this would be to replace the bar with a hollow aftermarket bar. Just to make sure we're on the same page, shoot us an email at support@british-customs.com with the question and pictures and we'll check it out!
@TheRicosauve Жыл бұрын
@@britishcustoms THANK YOU...for a super quick response and feedback. Yes we are on the same page...I assumed that was probably the case. I considered purchasing extra bars and drilling and tapping the insert to accept the end and wiring but keeping the stock bars. Can't find a shop willing to drill through them for fear of hitting the pin. Also as a side note...I've bought plenty of BC parts that are on my bike. Love the parts and the way it finishes the bike from stock. On the tail tidy...as a suggestion, many guys I know with the Thruxton prefer the look of the vintage brake light over led bars...but there are a few things we'd love to see BC do differently. 1). Have an option to place the license plate under the fender at the rear of the bracket (there is one brand out there that offers that option but the look of the light is awful). 2). A tighter, cleaner finish of the bracket plate...meaning eliminating the wide gaps around the base plate for a cleaner more polished look under the seat frame. Many tail tidy kits when fitted in leave gaps or just appear not as finished and clean looking. Not a compliant about your product just a suggestion. I would switch to your tail tidy for the more vintage brake light look if it had these two things. Overall BC makes FANTASTIC products...again, I really appreciate the video and your quick response. You guys ROCK!
@britishcustoms Жыл бұрын
Thanks for the kind words and suggestions! We'll make sure to get over your suggestions to our R&D team as we like a mix of our design process + community feedback. Give us a call at any time to talk bikes, details, and more info about this install! 877-999-2748 Thanks!
@thomastrujillo33543 ай бұрын
Would the fender eliminator fit on the 2019 triumph speed twin too?
@britishcustoms3 ай бұрын
This one will not as it's specific for the Thruxton R but here is the Tail Tidy for the Speed Twin 1200: britishcustoms.com/products/tail-tidy-for-triumph-speed-twin
@바이크타는신사장 Жыл бұрын
Hello. Can you tell me what kind of muffler is? I want to install it. The sound is cool
Please tell me the part number of the muffler that is installed in the video. The muffler on the homepage has a short silencer part.
@britishcustoms Жыл бұрын
Here is the link to the product of the full size/4" version for the Thruxton R/RS/St1200: britishcustoms.com/products/predator-carbon-slip-on-exhaust-for-triumph-thruxton-speed-twin-1
@tomten2240 Жыл бұрын
Is the fender eliminator kit the same kit as for the 2016-2019?
@britishcustoms Жыл бұрын
If it's for the Liquid Cooled model Thruxton (1200/R/RS), yes it will install the same.
@archermo3215 Жыл бұрын
Is the fender eliminator also fits the 2022 speed twin?
@britishcustoms Жыл бұрын
It will not as it's only for Thruxton Liquid Cooled models. For the Speed Twin, check out our Tail Tidy on our website.
@altcoinbonanza39269 ай бұрын
Would have been nice to fire it up to hear new exhaust
@britishcustoms9 ай бұрын
The bike does get fired up at the end: kzbin.info/www/bejne/aXuVpH1mdsyrr8Ufeature=shared&t=3701
@100kmp Жыл бұрын
The exhaust is but you are out of stock...
@britishcustoms9 ай бұрын
Hey there, if you're having issues with items that are out of stock, reach out to us at support@british-customs.com and we can look further into ETA's as we make all of these exhausts in-house.