Brogue Motorcycles - XSR-MT-FZ - CRG Bar End Mirror - Install Video

[@kumiko3264]

I just got these for a 2023 mt07. These should work great

[@krisvenema]

These mirrors and bar ends look great, are clearly very high quality, and I find them to be much more usable than the stock mirrors. I imagined that there might be a tradeoff, but I get to eat the cake, too. And it is great to be able to easily pop them inward when pulling into the garage next to the Lamb...Rav4. And I went with the Gen 1 bar ends per Brogue's recommendation, and that was the right advice. Pro tip for other idiots like me: Do not use a 5 (or whatever) Metric Allen/Hex key on the inner bolt when trying to remove the stock bar ends like I stupidly did; use a number 8 in the larger/outer bolt hole.

[@broguemotorcycles]

Hi Kris, thank you for the feedback and it was a pleasure working with you. Hope you love everything:). Mike @ Brogue

[@Alex-py6nh]

Could this be placed in xsr 700 X tribute 22'? Great video!

[@broguemotorcycles]

Yes they will and thanks for the support!

[@Impervium1090]

Nice video!

[@broguemotorcycles]

Thanks 😊.

[@krisvenema]

What's the difference between Gen1 and Gen2? I have a 2022 MT-07. Just do Gen2?

[@broguemotorcycles]

The only difference between the two is Gen 1 only allows for half clamp type mirrors to be installed and 2 will allow closed or half. Some prefer the look of the gen1 over Gen 2 (like me). Hope this helps!

[@krisvenema]

@@broguemotorcycles Excellent, I will go with Gen1 then. Thank you. What tends to be more popular: the 2" or 3" mirrors? Looking to grab a helmet lock, mirrors, mirror mounts, and a tail tidy kit. Will then look to request a front light and some other items from Santa :)

[@broguemotorcycles]

@@krisvenema 3" seems to be more popular for the moment as they offer more visibility. Thanks for the support and ride safe out there!

[@CraigoTheWinnebago]

What size brackets are the mirror mounts designed for if I wanted to install a non-CRG bar end? My bar end mirror brackets are 0.375" in width.

[@broguemotorcycles]

Gen 1 are .45 and gen 2 are .5 of an inch. Hope this helps!!!

[@Annoyingdog37]

Are you able to mount the mirrors on the oem bars themselves?

[@broguemotorcycles]

Unfortunely, you can't. We sell bar end mounts on our shop though :). BrogueMotorcycles.com

[@jockyboy9606]

if you take them next door to your friendly mill right you sure can :)

[@ChaseLancaster]

What tools did you use for this?

[@broguemotorcycles]

A metric Allen key set is what you'll need. Feel free to reach out -> [e-mail]

[@joemalone4224]

WILL THESE FIT A KAWASAKI NINJA 650 BAR END?

[@broguemotorcycles]

They will not fit. Sorry about that!

[@lukelowe918]

Would these fit a 7/8 INT650 bar?