I'm simultaneously relieved and disappointed that the hammer and chisel method wasn't used, and by disappointed I mean extremely relieved.
@MoreFunMakingIt5 ай бұрын
Got to build up to it. One for a future episode!
@Paul-c015 ай бұрын
ChuckyGang showed how to dislodge pesky Amiga 4000 caps with a hammer and pliers, albeit with some minor pad loss.
@terminalterminus5 ай бұрын
Never owned an Amiga (ST Rulez... ;) ) but always liked the look of the A600. More a spiritual successor to the C64.
@WhatHoSnorkers5 ай бұрын
Or you can use the peroxide and do your hair like Billy Idol! Great work, Lee! (MoreFunBlondeingIt)
@TheGunnarRoxen5 ай бұрын
I dunno... it might be a Shock To The System. Lee might be forced to give a Rebel Yell 😉
@MoreFunMakingIt5 ай бұрын
@TheGunnarRoxen got to be careful with harsh chemicals, I could end up with eyes without a face!
@TheGunnarRoxen5 ай бұрын
@@MoreFunMakingIt 🤣
@j0hnf_uk5 ай бұрын
My first Amiga was an A600, but it was a, 'gift', (so to speak), as it's what I bought with the money I got given for redecorating the front of my parents house, way back in 1992! I previously owned a C64, so went to Currys, (of all places), to see what computers they had to upgrade to. I only had enough for the A600 that was on offer and as I knew next to nothing about it, decided to buy it, there and then. It wasn't a bad machine to play games on, at the time, but after about a year I part exchanged it for an A1200 and got to realise the difference. Over the next few years, I upgraded it quite a bit with 8Mb of RAM, a 440Mb hard-disk, (that connected to the PCMCIA port), and a CD-ROM drive that used the ATAPI interface! The pièce de résistance was installing a 68060 co-processor that really beefed things up. For the mid 90's, it was a decent bit of kit!
@bobingabout5 ай бұрын
13:30 I remember I had a whole box of graphics cards like that. when I wanted some chips off one of them, I literally just took some sort of pliers, and wiggled the chips off. It ripped a whole bunch of tracks off the board too, but the chips were in otherwise perfect condition to use in their new home. I mean, I had an entire box of about 50 of them, they were going into E-Waste.
@Larry5 ай бұрын
I had an A600 back in the day, all my A500 owning friends were fascinated by it, especially how light the AC box was compared to theirs. But the only thing I didn't like about it was that I couldn't play Robocop 3 on it >.>
@Sozzled395 ай бұрын
Ah the A600, a misunderstood machine, but a great little portable gamer now. Great video Lee, I've never seen the A600 need all those underside caps replacing before.
@MoreFunMakingIt5 ай бұрын
It was very strange! Wasnt just the ones on the bottom, there were a load on the top too! Does make me worry that others on different parts of the circuit are going to go faulty too.
@Rockythefishman5 ай бұрын
The 600 was my first Amiga, everyone else had gotten 500/500+s the years before so for Christmas I got a A600. I loved it very much and took up a lot less desk space then my mates beast of a 500+ I upgraded the RAM, and added a second floppy. By the time 94 came around their was no point in upgrading it any more Commodore was done and it was clear the PC was going to take over. Nice repair mate, hope you enjoy many hours with it
@mikeh_nz5 ай бұрын
Good job Lee I appreciate that life is competing with these videos, but your still turning out good content :)
@MikkyTee5 ай бұрын
A600's are a great wee machine, at least it doesn't take up a whole desk like the huge a500.. Also a nice option for clearing out the inside and putting a mister in ;)
@Renk14 ай бұрын
My friend had an A500 and I wanted one too. When I finally managed to convince my parents to buy one, it wasn’t sold anymore but the A600 was. Got that instead and loved the machine! Sure, it had problems with some older games but Relokick 1.3 helped. Used it for years. I still have it and upgraded it to more modern standards (recapped too of course). Lovely computer, and these days a lot better than A500 in many ways, due to the expansion options.
@naviamiga4 ай бұрын
Was pretty overlooked due to the 1200 back in the day, but having a pocket size amiga for sensible soccer or worms games round friends was surprisingly useful.
@JohnDoe-qg6hm5 ай бұрын
I LOVED the A600 ! Still DO ! Not 70s or early 80's Retro but my First computer with a Floppy Disk Drive ! :) The Excitement, The FUN ! How can anyone HATE this beautiful little computer. They must be INSANE !
@MoreFunMakingIt5 ай бұрын
I love it now! Does that count?
@JamiesHackShack5 ай бұрын
Great vid! Always thought these 600s looked pretty cool. Bonus points for personalized components! 😂
@MoreFunMakingIt5 ай бұрын
Its a neat and tidy little machine!
@ClassicRetroByte5 ай бұрын
Another cracking good video 👍 and great tip with the memory chips on the Graphics card that I also have laying around.👍
@geezerdiamond5 ай бұрын
The first Amiga I ever saw was a 600 at a friend's house, and I pestered my parents for one the next Christmas. I've got lots of nostalgia for it, and I always like its cut-down A1200 looks.
@MoreFunMakingIt5 ай бұрын
It really is a nice looking duck :D
@Momentvm5 ай бұрын
an excellent video, Lee! Another (checkmark) icon saved from the bin. I wonder what's the problem with losing the red signal?
@DaveVelociraptor5 ай бұрын
I really enjoyed seeing your name on the smd component
@Retroguyuk755 ай бұрын
You can use the PCMCIA card with the memory expansion you just need to set it to a bit lower on the jumpers can't remember now either 4 or 6 mb...
@MoreFunMakingIt5 ай бұрын
That works on my 1200, but this expansion is 4mb only. No jumpers to set. And since I made the video the ram has gone faulty! Will need to think again with that one
@keyboard_g5 ай бұрын
Added fast ram only blocks the PCMCIA port functionality if you go over 8MB. You'll need some to run whdload games. Some cards even come with jumpers to downscale the fast mem so you can pick and choose how it works.
@Grid565 ай бұрын
One of the main problems with the commodore machines was that upgrades often were incompatible with software (mainly games). Having progressed from ZX81 and BBC-B micro and master I got a 500+. Later I added a scsii hard drive on my 500+ but had to disable it to run many of my favourite games. I remember similar complaints from "lucky" people who had the money to upgrade to 1200s then found difficulties. Happily I had many years of Pinball Dreams / fantasies and Lemmings before I moved to P.C. (mainly due to demise of commodore leading to lack of new support and software). Good Times nevertheless
@marjon17035 ай бұрын
My computer history is the same although after the 500 I progressed to the 2000 for the expendability.
@robertjones32235 ай бұрын
What about the fire and gunpowder method to remove caps?
@MoreFunMakingIt5 ай бұрын
I need to experiment!
@n13ldo5 ай бұрын
Nice to see it working and clean. I wasn't responsible for it's manky state 😁
@MoreFunMakingIt5 ай бұрын
All that filth protected it 😆
@hyzenthlay71515 ай бұрын
I loved my A600, and I really miss it!!
@keyboard_g5 ай бұрын
I'm torn, I love the A600 and that another Amiga was brought back. Disappointed that a retro GPU had to die to get those memory chips when chip memory upgrades with new hardware are readily available. Glad that the hot air delamination didn't totally destroy the board but, could that be the source of the flickering video?
@Corummo2 ай бұрын
Kapton tape is the tool you missed! :)
@MoreFunMakingIt2 ай бұрын
I prefer aluminium tape.
@MrClump5 ай бұрын
Is the clock working on that expansion? I've built a few of them, and while the RTC is detected it never runs.
@MoreFunMakingIt5 ай бұрын
Ive not had a chance to check that yet! Sorry.
@commodoreisnottheonlyfruit5 ай бұрын
fantastic video Lee.
@originalbrucesmith5 ай бұрын
Love the A600, had to buy it again after it was soled. Sad times, True story..
@originalbrucesmith5 ай бұрын
i had that ram cost me £25, when i was 14.
@random007nadir3 ай бұрын
I've never heard of ceramic SMD caps going closed circuit, never mind en masse. How bizarre.
@MoreFunMakingIt3 ай бұрын
Surprised me too!
@LeftoverBeefcake5 ай бұрын
The A600 was the Amiga Mini before the Amiga Mini.
@originalbrucesmith5 ай бұрын
Just to point out some times there a key combo to disable some fast ram to enable the pcmcia, or as long as you do t go over 4/4.4 mg fast ram it may work still can I not remember the limit.
@FixTechStuff5 ай бұрын
I enjoyed that, a bit of Amiga nostalgia.
@MoreFunMakingIt5 ай бұрын
Thanks!
@gingerhippygaming79625 ай бұрын
My first amiga I loved it
@TheRetroChannel5 ай бұрын
Big fan of the hammer and chisel method but you should never do that on an Amiga, because reasons.
@MoreFunMakingIt5 ай бұрын
Because REASONS!
@retrowedugmiksola18105 ай бұрын
You can switch off half of fast memory (software script or hardware jumper), and PCMCIA will work properly :)
@synchro625 ай бұрын
I never thought it was ugly but just considered it a poor mans A1200 :)
@Retroguyuk755 ай бұрын
I love my A600, it has the 3.2 rom and card hard drive too. I have an A500 as well, not by choice I put a bid on Fleabay for £30 thinking it would never go for that and it did 🤣
@MoreFunMakingIt5 ай бұрын
Bargain! But also you now have to store a 500 :D
@Mind-your-own-beeswax4 ай бұрын
A bought one of my 600s off eBay for £26. Even came with a power supply and mouse and surprisingly it works perfectly.
@TheFuzzy705 ай бұрын
At least the graphics card I gave you has been put to good use in a proper computer 😂
@MoreFunMakingIt5 ай бұрын
🤣
@NathanOZlegend5 ай бұрын
turned out to be the best amiga for transfer of adf at the time
@Tempest_Elixir5 ай бұрын
Great video as always! Love the retro photo at the start 😂 Plus your reaction to your "mistakes" did make me chuckle! Are you still able to help with my ZX Spectrum please Lee? We were chatting through email before i got my Byte Delight delivery. I've sent a couple of emails since receiving what i needed but haven't heard back yet. (Not rushing you) as i know how busy you are with the channels and builds and charity work etc. All the best and great vid 👍🏻
@hollybrereton31405 ай бұрын
I was so looking forward to the hammer action ;(
@MoreFunMakingIt5 ай бұрын
I'm still refining the method...
@colincurrie91515 ай бұрын
I can't wait to see what all the auction items end up going for. Hopefully make loads for charity.
@MoreFunMakingIt5 ай бұрын
Going to be a hell of a day! Even if we dont make 15k it will be a huge amount just with everything I have here to sell.
@panagiotisandrikopoulos68535 ай бұрын
i still have it, an A600 and works perfect ! after 20+ years ? (somewhere there :D )
@leonkiriliuk5 ай бұрын
"causing high resistance" -> "causing low resistance". :)
@MoreFunMakingIt5 ай бұрын
I always get that the wrong way round 🤣
@vertigoz5 ай бұрын
Had it AGA it would have become a beautiful swan
@bobingabout5 ай бұрын
I honestly wouldn't say the Amiga 600 is "Worst" than an A500. It's basically an A500+ in hardware, with the addition of PCMCIA and a built in IDE hard drive controller. It was only an issue if you actually wanted to use some of the existing hardware expansions (that didn't plug into the back ports, like a floppy drive), so for the people it was aimed at (Like my Dad who didn't have an Amiga at the time), it was a brilliant starter model. The 1200 is a lot better though.
@myleft93975 ай бұрын
lol same look less hair...edit: double lol hammer and chisel!? let's see it
@rossbennett50695 ай бұрын
I guarantee you’ll break £15000. I’ll be bidding at least £1000 and will definitely be outbid.
@MoreFunMakingIt5 ай бұрын
Wow! I hope you get something in the auctions Ross! There are soooo many things. I will soon be making a video going through all the items.
@rossbennett50695 ай бұрын
There are at least two that I really want and they have been on my wish list for years. The bath full of ice is ready for the backstreet kidney donation
@mikeh_nz5 ай бұрын
If it looks like a duck… and it sounds like a duck… …
@ChadDoebelin5 ай бұрын
hammer and chisel?!
@MoreFunMakingIt5 ай бұрын
You heard it here first! (and possible last) :D
@tenminutetokyo26435 ай бұрын
It was awesome.
@peteredwards23185 ай бұрын
Um, excuse me? Hated? I LOVED my Amiga 600. Words like "everyone" only have a valid use when there are no dissenting opinions, therefore your title card is incorrect.
@BumdanglerFartbiscuit5 ай бұрын
maybe watch the video before losing your rag at a complete stranger, chum
@MoreFunMakingIt5 ай бұрын
Um, excuse me? Hyperbole? But thanks for watching and taking the time to comment :D
@mattloren97085 ай бұрын
Those caps look horrible to replace
@Funresponse62675 ай бұрын
Will NES controller work in window 11 laptop with RS232 db-9 female serial adapter to usb cable ? Plz reply 🙏