Broken GHK Glock? Here is the way to make it Great Again! | 壞掉的GHK Glock 有救? | The Better

[@noahconsul6041]

Bro this is the man I was inspired to take parts of my gbb Airsoft guns to clean them fix them and to do what he does without him I wouldn’t be learning anything my wish is to work with him and be in one of his videos but keep up the work man ur doing amazing

[@passerirc]

Great Job Dude.

[@4UADSmartAirsoft]

感謝支持!!我們繼續努力!

[@DarrenMassey-t2i]

Not fitted trigger yet as waiting for it to arrive, but I think its great you guys have released this update video on the 'possible issue' shows great support for your products. Also, must say i love the production of your videos its top notch. I find watching your 'tech' content a great way to unwind and de-stress at the end of a hard day! ❤️🤘🔥

[@pandashit7023]

用你們這方法修理好後，今天下場已經正常沒事了。感謝你們的幫忙❤❤❤❤

[@4UADSmartAirsoft]

恭喜恭喜~~哈哈哈MOA 有緣再見面

[@pandashit7023]

@@4UADSmartAirsoft 我會出現的🤪🤪🤪🤪

[@Teodsky7447]

i want to thank you guys for your product specially your hop up bucking because i won in a fun shoot event here in the Philippines last August 25. iam very thankful to buy your products and i will never forget the moment i won in Standard Division in IPSC action air. again thanks 4uad industries for the products specially on your friction pro hop up bucking. by the way my gun is a WE glock34 gen4

[@4UADSmartAirsoft]

We are truly honored man! Glad we helped in someways! we will keep the good stuff coming!

[@Machiflores]

Very nice video. For me, is not that TM has good tolerances as even well (or name the most crappy company doing clones) can do proper firing TM clones. In what TM succeeded was the design. That is the godly part. It's hammer mechanism. That hammer system makes it less nitpicky on tolerances as is made to: super fast action to fully press the valve, full energy to open the valve comes from kinetic energy of a hammer (once open you don't actually have that much resistance to have it open) and then the valve knocker stays locked and pushing until the slide has moved past a point. That is genius. GHK chose a nitpicky design. And its mag seems to wobble much more than a VFC, that might end up in an issue that depends on the mag used. I am sorry to say this, but it's a Lamborghini priced gun that works, well, like a Lamborghini...

[@brownbrown1493]

TAF真的很棒他們也有幫我AK解決不少問題

[@michaelmccr3294]

Love your videos and now I'm transitioning into gbbrs atm and I'm using nor just yous but other gbbr techs on to do and not

[@YIUYIUCHU173]

另外可以考慮免費或付款下載印有4UAD的紙靶嗎？？ 摩擦大師膠皮真好用

[@4UADSmartAirsoft]

這個idea 好 我們來弄

[@Airsoft_forever777]

The Ghk Glock gen 3 housing unit is solid I don’t know about those gen 5 but the Ghk umarex gen 3 is a gift from the gods of airsoft 🔥

[@4UADSmartAirsoft]

In Fact every single gun is an individual case haha

[@junlp9492]

I got a gen 5 unit and I think it's really good. However, the hard to pull trigger problem only comes in when the trigger "sear"(sorry i don't know it's real name) and the underside of the trigger locator is bone dry. Lube a little and the pull is manageable whether you slap or squeeze. The zamak material might last a while but I think a steel trigger locator is better in the long run (steel on steel).If you want higher fps-mine normalize at 320-300fps, get the 4UAD hop unit (will buy soon) and your favorite tight bore barrel. I don't regret getting this pistol. Great stuff GHK and 4UAD smartairsoft!👍*** Btw, my unit didn't have the hammer unit wobble.

[@4UADSmartAirsoft]

Haha thanks man and really appreciate the helpful tips you shared here :DD

[@wilson01131]

很實用的教學，讚

[@a09873599]

這把原廠的扳機(2024)真的很神奇，一開始讓你硬到因為手痛要你換中指開槍，暴力訓槍後清油泥、上油，竟然又變得Q彈有勁，但想速射可能還是需要改扳機，2024 Gen5版本火控在新品使用上，也無晃動的情形，看來是廠商有改善。 但坦白講，這是一把小問題不少的槍，時間不多或只想爽爽下場打的人不推薦，這是一把只適合當模型槍的玩具，真的不是每個人都有時間送回原廠處理的，就把它放在某個角落放著爛吧。

[@4UADSmartAirsoft]

這把問題真得不少 XD

[@andyvan5692]

at 17:55 one way to speed this up, is to use feeler gauges, and measure this gap, and then you know how thick a stack to use.

[@4UADSmartAirsoft]

Good tip indeed

[@bbq4373]

來支持啦~

[@TheBeatboxMasta]

Love your content, keep going. Perfect presentation, plenty technical details, and absolutely great overall quallity of everythig. Love how your videos looks and sounds. Find it very intreresting and exciting to watch for the sake of interest, and just for fun and chill. And you definitely need to add a music tracklist for all of your videos. Can you give me a tracklist for this one pls?

[@蘇育辰-z5r]

謝謝🙏🏻 解決了

[@4UADSmartAirsoft]

nice!

[@tobywalker8328]

Hello love your videos bro always learning! Where did you get the micro comp from?

[@4UADSmartAirsoft]

its a brand in taiwan called gunday

[@Frambhueee]

Can you make a striker "hammer" assemvly design for the TM glocks?

[@zemarcelu]

Great Video !!

[@michaelmccr3294]

I got a ghk glock 45 and I've noticed that they fixed the wobbly control unit at the back as it tiny bit back and forward. They also fixed that trigger thing too as I can pre ready the trigger as I know where the wall is but you have to self teach yourself on how to hold the pte trigger jsut right or it will pre-realise the gas. For a ghk glock 45 with has only been out for 2 months it is much better then vfc one and I'm kinda excited for aftermarket companies to make a thread outerbarrel for ghk glock 45 ad I love the whole realistic of it.... oh man the price is worth it, if you can show us on how to put a thread adapter into it them do so.

[@4UADSmartAirsoft]

now that is some good news hahaha

[@幽零-x5v]

Does vfc also have the same problem?

[@m913282]

聽講日本Marui 會再出返G17 Gen 5, 再睇定啲！ VFC vs GHK vs MARUI??

[@aldouslau8722]

GHK never let us down, retail price with not fully functioned products, need fix the internal yourself every single time

[@4UADSmartAirsoft]

lol

[@Teodsky7447]

by the way sir adrew can you demonstrate an installation on your TRI trigger on WE glock guns thanks

[@infowarsAU]

My beretta m92 having trouble shooting, semi and auto mixed, when it’s only a semi auto AS? What do u think the trouble is there! Brother

[@Marf83]

Whats the compensator you're running on the Glock in the promo pic?…looks 🔥

[@4UADSmartAirsoft]

Radian glock micro compensator :D made by gunday

[@Marf83]

@@4UADSmartAirsoft have you put a real steal ram jet on it or is it an Airsoft repro, if so what’s it called/where can I get one? Thanks

[@angusdarven5420]

Could I make put that trigger in my TM GLOCK ?

[@4UADSmartAirsoft]

if it is a gen 5 it won't fit, but anything before TM gen 5 will

[@幽零-x5v]

vfc也有這個問題嗎？

[@junlp9492]

Thanks for the replies 4UAD. I have another question if you don't mind. When the trigger is forward, these springs- (1 on the trigger-compressed when fired, 1 on the trigger bar-stretched when fired and one or 2(?) inside the firing pin/hammer housing is stretched when fired

[@4UADSmartAirsoft]

Actually for the Ghk system it doesn’t really matter, but Marui and Vfc glocks please don’t store the gun cocked

[@junlp9492]

@@4UADSmartAirsoft Good to know! Thanks.

[@Yen-eg3vn]

我剛買一個月的G17，出現了一次擊發瓦斯全洩完且無法再次上膛，然後就送回原廠維修了（維修後原廠沒說原因），我想應該是影片中提到的撞針過長吧！

[@4UADSmartAirsoft]

應該是，連桿角度不對確實會直接噴完

[@junlp9492]

Just to add, does putting a thin material on either side of the magwell's inside front/back help with the pre-release issue?

[@4UADSmartAirsoft]

I think that will certainly help since the mag is no longer wobbling

[@pfyljan95]

Fantastic ✌️ wauuuuuu ♥️

[@phongduong6835]

Trường hợp này là khi mua bộ cò của bạn thay vào ghk glock 17 gen 5 sẽ bị hay là bản gốc của nó bộ cò ghk cũng bị lỗi này . Tôi đang phân vân có nên thay bộ cò của bạn hay giữ nguyên ban đầu thì có bị lỗi này ??

[@4UADSmartAirsoft]

its impossible for us to manage how a manufacture produce their product, and I certainly wish I can just change our design and it works great. The thing is, 30 % works great, 30% have drop of fps and 30 % pre releases gas and 10 % is in between. so no matter how we change the design, there is always problems. Therefore we made this video, and trying our best to help the users who got our trigger. so please don't spend your money on this product if DIY is not a thing for you.

[@Fuzzyhead16]

how do i fix the issue of springs running and jumping away from me, same for small screws and pins?

[@sogerc1]

Most of it is dexterity, you need to practice a lot. And watch youtube videos first so you know what to expect. Try to work in a small enclosed space so if something flies away you can find it, because it happens to everyone. Don't work on your bed, that's like the worst place to fix anything. When putting stuff together I've learned a little trick from Negative Airsoft, if you have to extend a spring and put it on a pin or something instead of a smooth tool like a screwdriver or needle use a small file, that will grab hold of your spring better.

[@Enso-dz9ds]

My gen 3 slide has decided to start falling off after 3-4 shots! 🤷🏻‍♂️ if you explain how to fix that I’d be very happy 😂

[@4UADSmartAirsoft]

Let see if this one will save your pistol

[@user-nylong]

我發現還有一個彈匣的問題，就是彈匣要灌多少瓦斯，效能才能最佳化 灌太多，敲不下去，灌太少，打10發就沒氣 有大大能分享一下灌氣訣竅嗎？ 😅

[@4UADSmartAirsoft]

灌第一下先把氣閥壓著排掉裡面的空氣, 接下來灌四秒,但照理來說你不應該有鍬不下去的問題

[@user-nylong]

@@4UADSmartAirsoft 我後來用游標卡尺量，發現每個彈匣大小會不一，所以有的敲的比較開，有的只敲一咪咪

[@simonstokes369]

This has been spoken about on HRC a month ago. It’s the premiere gas blow back group, please join, please please. We have Redwolf, ASG, NE, Krytec, XE and many cool people. You would be so welcome to join and your presence would be appreciated.

[@coolermaster]

Hi. My GHK glock 17 gen 5 Mos like yours doesn’t have that wobble, it’s not even moving a tiny bit. Question is, do I still need to do the bending of the linkage bar if I install your 4uad trigger?

[@4UADSmartAirsoft]

if it shoots like shit than yes, but if it shoots great don't touch anything lol

[@coolermaster]

@@4UADSmartAirsoftI think I have to do the fix, my fps dropped 😅 btw I am using your bucking ,chamber and the trigger now 😁

[@4UADSmartAirsoft]

@@coolermaster Haha Thanks man yah that fix is a must. good luck! shoot us some messages if you needed some help

[@coolermaster]

@@4UADSmartAirsoft I adjusted the trigger bar and so far it’s shooting better now and I think it’s consuming more gas than the stock config with stock trigger 😅 it’s not pre-releasing gas though when I press the trigger. I will do some testing again if it really does use more gas now, maybe I need to bend it a little bit back.

[@4UADSmartAirsoft]

@@coolermaster yah that make sense, since its releasing more gas through a longer traveling valve knocker. The gas efficiency should be quite minimal, if it had some big effects you might need to fine tune it slightly more :D

[@m913282]

If compare with VFC G17 gen5 ，which is reliable？

[@colgatetoothpaste3440]

Vfc

[@aaron4820]

VFC also has steel slides available, I own both, VFC all the way.

[@m913282]

@@aaron4820 Is pro arms steel slide in VFC?

[@SIXMMCUSTOM]

GHK, but the VFC has more tuning parts available.

[@SIXMMCUSTOM]

@@m913282There’s a Steel Slide kit for the VFC Gen 5 from: - Bomber - Pro Arms - Mafioso - USHOT

[@MrMrHeino]

Does this problem also exist in the gen 3 with the trigger? If I want to install the trigger there, I have to change the trigger rod from the improved. Or? Are there people here who have installed the trigger in the gen 3 and if so, how does it work there...

[@4UADSmartAirsoft]

it really depends on the pistol you got, every pistol is different

[@小郭-g6f]

中部地區有推薦安裝的店家嗎謝謝

[@4UADSmartAirsoft]

可能要找找工作室會比較恰當，AIM 就還不錯

[@DEAJman]

控制公差确实很痛苦

[@gerxcktrxckt4572]

Hello, with my gen 3, your TRI Trigger sometimes gets stuck instead of reseting. And if it resets, it feels like i goes with a lot of power to the reset point and its difficult to stop at the reset because the trigger is pushed so fast forward, or its gets stuck and does not push forward. Is this normal? Does anyone have the same issue? Thanks.

[@4UADSmartAirsoft]

I would suggest double check the linkage and make sure when its installed the trigger can move freely

[@李品宣-e1t]

想請教一下，已經照你們的影片教學改良過了，但在只有下槍身沒裝彈匣的情況下試扣板機，有時板機阻力大有時阻力小，當我把槍結合好後上彈匣擊發發現板機阻力大時擊發的後座力大彈道直，阻力小時則相反導致BB彈不是射不出去從槍管滾出來不然就是打不穿薄的靶紙請問問題是出在哪呢？我使用的板機還有HOP座跟皮都是你們的產品在麻煩你們幫我解惑了，謝謝

[@coolermaster]

I use their hop-up , bucking and trigger too. I noticed my fps dropped but I never experienced bbs rolling out of the barrel, not yet.

[@4UADSmartAirsoft]

來粉專丟個影片我們協助處理一下 :D

[@Aroo501]

看下來似乎Gen3好像做的比較認真😂

[@企鵝-h6s]

價格差距在那邊

[@Aroo501]

@@企鵝-h6s 打了這麼多年手槍KSC塑膠滑套版、HFC、WE、謎版、VxC USP👎👎、VFC G系列👍👍，才覺得這個價格差距真香

[@anonymousnoone77]

💪❤️👍

[@phongduong6835]

Vậy là cò ghk ko bị nhưng khi gắn bộ phận của bạn thì sẽ bị lỗi này . Như vậy những người ko am hiểu về vấn đề này sẽ mua một sản phẩm lỗi của bạn để ráp vào . Vấn đề này nghiêm trọng

[@4UADSmartAirsoft]

its impossible for us to manage how a manufacture produce their product, and I certainly wish I can just change our design and it works great. The thing is, 30 % works great, 30% have drop of fps and 30 % pre releases gas and 10 % is in between. so no matter how we change the design, there is always problems. Therefore we made this video, and trying our best to help the users who got our trigger. so please don't spend your money on this product if DIY is not a thing for you.

[@190152766]

凹了五個小時的連接桿 然而一點屁用都沒有 換回原廠扳機就正常了 浪費我買改套的錢😑

[@4UADSmartAirsoft]

好喔抱歉造成困擾

[@TheWalkingDeadMan64]

Why so much stress? if the GHK doesn't work. go to trash

[@4UADSmartAirsoft]

I refuse

[@Winniexp]

我在想去打磨那个扳机连杆会不会更好😂也许打磨0.5mm就一劳永逸啦。

[@4UADSmartAirsoft]

磨壞了就沒囉XDD