No video

Get your gbb to shoot 80M | VFC M110K1 | The Better

  Рет қаралды 58,273

4UAD SmartAirsoft

4UAD SmartAirsoft

Күн бұрын

Пікірлер: 323
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
👇Sponsor & Any Good Stuff👇 👇影片裡的好東西在下方連結👇 Go check out 4UAD new arrival & lubricant pen 【4UAD 相關商品在下方連結↓↓↓】 🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒 Special Thanks: ➤ 犀牛戰場: 這個場地真的誇張好玩!!! This Field is crazy fun!!! 🛒Goods : facebook.com/profile.php?id=100095398034153 ➤ACETECH: you guys do make some amazing tracers and chrono 🛒Goods : www.acetk.com/ 🛒 Amazon Goods : amzn.to/3sr5I2n ➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!! 🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
@Havok_AS
@Havok_AS 11 ай бұрын
It may be a nuisance when you get a GBB that suffers from being built by bad choices, but when you work on it and make it a top performer, it feels so good😍
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
I know and it really make me feel great after seeing it work like a charm
@wind9013
@wind9013 11 ай бұрын
希望VFC有看到這支影片,你們家的東西真的非常......適合訓練每個買你們產品的玩家,變成小賴這麼會打磨跟拆螺絲。
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
他們進步真的蠻多的了~更何況這是早期版
@anexion
@anexion 10 ай бұрын
Seriously, one of the nicest and more tensed bb flights I’ve ever seen 😳 congrats dude amazing job
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Stay tuned for our hop up bucking
@marlonm.2820
@marlonm.2820 11 ай бұрын
This was amazing! Thank you guys, this video was so informative and it definitely gives some peace in me wanting to buy my first GBBR. Also, I've been following you guys since almost the beginning of this channel and I just wanted to say, THANK YOU! This channel is everything I want from a information stand point and the quality of the content is insane! I never thought a channel like this could exist but here we are! Thanks again for all your hard work and giving us the most quality content!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Hey Marlonm You have no idea how much this means to me and the team! And we are so glad that this channel is helping out the Airsoft community in someways! Thank for for the support for all these times, it's a tough road, but I promise you we will keep on making great videos. Best wishes :D
@Alcattraz
@Alcattraz 11 күн бұрын
Im amazed at full dedication you guys made this video, it really helps me to fix my KWA LM4 that also doesn't have enough hop up. Thanks for the tissue and super glue tip bro 😀 love from indonesia
@4UADSmartAirsoft
@4UADSmartAirsoft 9 күн бұрын
Glad we helped in someways :DD
@user-tl1el8sk6w
@user-tl1el8sk6w 11 ай бұрын
這集很精采呢,謝謝你們花這麼多時間和精力,來拍攝製作這些內容豐富的影片!!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
沒問題的! 希望大家喜歡~拍影片是很開心的一件事,我們也想繼續跟大家分享我們的經驗
@enidpuceflange
@enidpuceflange 11 ай бұрын
Awesome stuff!! Nice to have a bit of scientific explanation for the reasons behind an upgrade Too many people throw Gucci components into their replica without really understanding the cause & affect and actually end up making things worse 👍
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
That is some nice suggestions man, I will keep that in mind for sure! Really interesting way to approach the expensive area haha
@tsang-shuokuo
@tsang-shuokuo 11 ай бұрын
謝謝4UAD 新系列的影片~ 有你們 優質的airsoft 真的很棒~!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
希望這系列影片能夠幫助到大家!
@MrDude308
@MrDude308 11 ай бұрын
Definitely love this series , I would love to see more advanced tips and tricks for teching since most of the videos are about entry level tech tips.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Sure will put that to the notes
@Airsoft_Chay
@Airsoft_Chay 11 ай бұрын
I’m quite surprised to see so many QC issues within an expensive VFC. Considering how they are improving in the GBBR world, hopefully they deal with this problem.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Yah the problems are solved by Vfc already, since this one was the old one laying around, and they made some big improvements already
@user-td2lu3vq1e
@user-td2lu3vq1e 8 ай бұрын
They have new updated version this coming february. They fix all issue from their DMR segment
@556nato_negev
@556nato_negev 11 ай бұрын
今年企劃很多欸 有油筆的影片 又有跟觀眾承諾的升級系列
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
一定要承諾的啊~我今天來杯大杯珍奶~~感謝5.56每次的支持
@LosLos-Sensei
@LosLos-Sensei 11 ай бұрын
Negev 是我最喜愛的機槍❤!
@JedociderShou
@JedociderShou 11 ай бұрын
You guys never fail to amaze me! I love watching this kind of airsoft tech content and you're the best in that category. For future content maybe you can consider doing some hi capa improvements too. That would be lovely
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Will put that to the list! Thank you big time!
@JedociderShou
@JedociderShou 11 ай бұрын
@@4UADSmartAirsoft and oh I would love to see the "tissue super glue" hack there. 😉
@MsZoppek
@MsZoppek 11 ай бұрын
The bolt lock not working after changing the Buffer tube. There is a better solution. The buffertube on the SR25 is a Realsteal milspec Ar10/M16A2 buffertube,wich is 2cm longer, because of the longer Bolt (AR10). So if you want to change the buffer use an Ar10 / or m16A2 buffertube, so you dont need to cut the buffer
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Dude! Straight to the point! Nice one! How come I didn’t thought of that haha! Thanks man! That is some nice Info to share!
@loicdebal9274
@loicdebal9274 11 ай бұрын
Sorry but all this getting me tired of airsoft, why the replicas are never 100 percent finished... Only TokyoMarui is able to deliver replica that works and for long
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha it was whole lot of fun for me, but yah that might be the reason why Tokyo Marui is Tokyo Marui haha
@ferdinandolatin2125
@ferdinandolatin2125 11 ай бұрын
Marui might be the best quality m4 gbb oob. But I agree with Andrew, it is more fun. When you succeed to perform modification, and surpasses mws, like that vfc, you will have more satisfying feeling. I dont like mws trigger feeling. So toy.
@dolandulin163
@dolandulin163 11 ай бұрын
Its just vfc, u know,
@michaelmccr3294
@michaelmccr3294 11 ай бұрын
It's always better and fun to built it to your playstyle and needs.
@gabecollins5585
@gabecollins5585 10 ай бұрын
There’s much more companies that are good and last a while than just Tokyo Marui.
@SuperMrBenyfication
@SuperMrBenyfication 11 ай бұрын
awesome video as always! you are easily one of my favorite if not the favorite airsoft tech channel out there. always exactly what I want to see/know. thank you and keep up the awesome work!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha thanks man glad you like it! I will keep more coming!
@dealertft
@dealertft 11 ай бұрын
每一期都能学到新知识 thx bro
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Anytime! 很高興能幫上忙
@SupraTompan
@SupraTompan 11 ай бұрын
Love your channel mate. Vibe is perfect along with those ASMR-like builds and info videos. Regards from Sweden.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Thanks for the love man! We will keep the stuff coming!
@patirckable
@patirckable 8 ай бұрын
Would be actually nice if the issues were non-existent ootb. Hoping the ones you shown here are fixed in the newer releases. Great vid!
@4UADSmartAirsoft
@4UADSmartAirsoft 8 ай бұрын
Thanks man I’m pretty sure they got the problem fixed already
@jameschew5175
@jameschew5175 9 ай бұрын
Wonderful insight on the 110. Now i am so tempted to put it into my christmas list...lol. may dropby 2 see u guys one of these days. Keep the good work up. Cheers
@4UADSmartAirsoft
@4UADSmartAirsoft 9 ай бұрын
hahah sure come to MOA 2023 on Dec1-3 would love to hang a bit and we got you some free buckings!
@Icewords
@Icewords 11 ай бұрын
真的太猛了,完整解放m110的實力 問題是一般人不可能切短buffer跟槍機鑽洞減重吧 鑽下去幾千塊,歪了就是再來一次,我就算辦得到也太不敢動
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
哈哈哈我那個時候其實也蠻怕的,鑽洞完全不需要只輕了45克 buffer 換Ghk然後把緩衝拔掉即可
@pigpigpigbig
@pigpigpigbig 11 ай бұрын
Gbb界黑傑克是你!😊
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
沒啦土炮土炮
@tarrlevente1
@tarrlevente1 5 ай бұрын
Hi! I just ordered a similar gun (with fixed stock) from Taiwan. You gave a lot of good ideas for tuning, thanks for that. I will also replace the NPAS valve with an adjustable one. 2J is allowed for DMR in my country. I hope I can hit the 80 meters too.
@ferdinandolatin2125
@ferdinandolatin2125 11 ай бұрын
Very very nice content. People thought thight barrel while you mod just only with tissue and super glue for super hop up. I agree, nub is the most important than barrel
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Totally agree man, nub and bucking is the single most important item for airsoft gun when it comes to range and accuracy.
@Williamjillballbag
@Williamjillballbag 9 ай бұрын
1:32 got me good 😂 my barrel on my mk18 came loose the other day and until I fixed it I was thinking this exact same thing 😂
@4UADSmartAirsoft
@4UADSmartAirsoft 9 ай бұрын
Hahahaha I know right
@kevinjohannes2234
@kevinjohannes2234 10 ай бұрын
After seeing this, im just gratefull my ghk AK just having some short receiver, wide receiver, and 0.2mm too high hop up retainer that chewed the hop up bucking At least i can adjust the zenitco rail by adding some 2mm spacers File the base of the hop up retainer And fix the wide receiver with wood clamp
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Oh man Ghk aks do have quite some problems as well.
@Plechaccorner
@Plechaccorner 11 ай бұрын
One important information which I was missing is what bb weigth were you using and what power output did the m110 had at the time of testing :)
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
I was shooting 0.45g bbs and 2.8j
@tarrlevente1
@tarrlevente1 4 ай бұрын
In the end I also bought the K1 version from Taiwan. It arrived last week. Unfortunately, the errors in the video were not corrected by VFC. The flat thread of the buffer tube was coated with some kind of adhesive, that's all they "innovated". I replaced it with an original AR10 buffer tube before it broke. It was quite difficult to unroll because of the glue. For the hopup, I glued a piece of an old hopup rubber to contact point of the arm, so it still spins the 0.45 BB properly. I also replaced the valve in the nozzle with an adjustable one (NPAS), I had one at home for a 416 and the two are the same.
@4UADSmartAirsoft
@4UADSmartAirsoft 4 ай бұрын
if you bought it from a store it might still be the old version, now you can use this video to fix it up lol. But yah I feel sorry that you have to go through all that.
@dca224
@dca224 11 ай бұрын
我相信很多的玩家都沒有這樣手工DIY改槍的能力,槍有問題都只會丟給店家去修,更何況VFC的產品款式那麼多樣每款都有不同的小問題,還得必須一直反覆測試才有辦法找到絕決問題的辦法,看完都搞不清楚這是推坑影片還是勸退影片了,還有就是貓咪好可愛
@heyyourefinallyawake6342
@heyyourefinallyawake6342 11 ай бұрын
即使是店家也不一定敢這樣處理 通常都建議替換零件 不換的話就是無法處理
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
哈哈哈這個是我們的解決方案,放在這邊給大家參考用~~不用完全買單
@LosLos-Sensei
@LosLos-Sensei 11 ай бұрын
優質影片就是要Super Thank支持的啦!!!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
請大家多跟這位大大學習哈哈哈~~~~感謝支持
@VIIStardust
@VIIStardust 11 ай бұрын
I missed a bunch of vids since I was in Taiwan but I came back to a banger! Nice video!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
The next time you visit shoot me an message! XDDD
@VIIStardust
@VIIStardust 11 ай бұрын
@@4UADSmartAirsoft For sure! Really wanted to this time already but I was too busy with family TwT
@Stryker200000
@Stryker200000 11 ай бұрын
That is interesting to see how it's basically falling apart. I picked up the 1st Gen you could say, SR25 and the only issue I had was the barrel being low quality at first. After about a year of off and on use, the bolt started to break with the fake gas key and they had a tab on the bottom to help with the hammer resetting to not wear down the bolt. That tends spring literally fell apart and jammed my rifle into full auto till I was able to Jerry rig a AEG reversal latch gear in it I picked up a new bolt and seen they removed it all together now though.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Damn if that happens to me I would be pissed lol hope you got it fixed I heard it cost a fortune to fix one of those
@Stryker200000
@Stryker200000 11 ай бұрын
@@4UADSmartAirsoft I got a new bolt really cheap off Hop Up. Usually it's between 110-130. USD. I got one for 80 USD
@bob47218
@bob47218 11 ай бұрын
熱風槍真的是必備工具 原廠的super glue有夠屌
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
原廠膠水真的很兇悍
@peter11256
@peter11256 11 ай бұрын
You guys never fail to deliver, great job. Also, very interesting technique with the paper towel + superglue, I may try that out eventually. I like using harder material for the nub but the metal arm itself (which acts as the nub) is just too hard IMO, It needs a hopup system with virtually no play to work well which is something unfeasible with GBBRs, especially considering VFC's Guide Hop has waay too much play ootb (at least on the BCM, I don't own an MK110). I have a similar way to address this, I carve a cylindrical shape on the hop arm and use a DIY polymer nub, works wonders. In the video it seems you are using Tokyo Marui's stock MWS bucking, is that right ?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
It’s a prototype from us haha stay tuned xD
@SpoopyTime
@SpoopyTime 11 ай бұрын
GBBRs usually are pretty bad unfortunally, especially in cold weathers, but are so freaking bad ass.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Yah man I totally agree when it’s cold gbb just dies
@brunonascimento5863
@brunonascimento5863 11 ай бұрын
please, if possible, make videos of the electrical replicas - aeg, thanks in advance. Great video by the way.🇧🇷
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Will do man!
@rydllukas9254
@rydllukas9254 11 ай бұрын
i miss chrono but rly nice video!!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha 0.45g and 2.8j
@PhantomM16
@PhantomM16 3 ай бұрын
The bucking used in this video, were you doing R&D for the Quantum bucking and were using a prototype?
@4UADSmartAirsoft
@4UADSmartAirsoft 2 ай бұрын
hahaha yeah you got that right
@ray07181
@ray07181 11 ай бұрын
我的天,那個射擊場地好棒!
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
來豐原玩一下啊
@ray07181
@ray07181 11 ай бұрын
哪家的付費場地呢?
@user-td2lu3vq1e
@user-td2lu3vq1e 8 ай бұрын
Are they going to release new version of this Gun on february? They had announcement that they will remove the valve knocker and change the hammer to version 3. Thats awesome to hear. Any thoughts on this?
@maxk2010kimi
@maxk2010kimi 10 ай бұрын
很有用的教學
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
很高興有幫上忙
@ordinarylampshade4624
@ordinarylampshade4624 11 ай бұрын
Why is swiss cheesing the bolt in video about increasing range? Also wouldn't that cause problems with the bolt's structural integrity?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Swiss cheesing has nothing to do with range, it’s just something I wanted to do
@ordinarylampshade4624
@ordinarylampshade4624 11 ай бұрын
@@4UADSmartAirsoft fair enough
@thongbao4583
@thongbao4583 10 ай бұрын
thank alot bro. I need save it video for my m110
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Anytime buddy!
@aleksandrdunaev8958
@aleksandrdunaev8958 11 ай бұрын
Did I miss? What was the weight of BBs at the shooting practice?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g and 2.8 j
@Valentin-ri1zr
@Valentin-ri1zr 8 ай бұрын
80m is getting pretty impressive on a Gbbr DMR What’s the power output and BB weight you used to shoot ?
@4UADSmartAirsoft
@4UADSmartAirsoft 8 ай бұрын
2.8J with 0.45g
@mhdrahman1637
@mhdrahman1637 11 ай бұрын
Very good DMR, please review airsoft spring sir 😅
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha will do
@tuscan2280
@tuscan2280 11 ай бұрын
Nice video guys !! Just 2 questions. What weight was the bb and how many joules was the replica, it help me to understand better 😊
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha sure it was using 0.45g bbs and 2.8joule
@tuscan2280
@tuscan2280 11 ай бұрын
@@4UADSmartAirsoft ❤️
@user-zg6di9vd1r
@user-zg6di9vd1r 11 ай бұрын
希望有hk417 的優化影片🥺 我好需要
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
那得好好研究一下417了
@tarrlevente1
@tarrlevente1 4 ай бұрын
I have a little problem with my brand new replica. I have written the changes below. After the first 5-6 shoots the fps falls to zero, the BB left in the chamber. Have you any idea what is wrong? Maybe the adjustable NPAS valve is not working properly?
@4UADSmartAirsoft
@4UADSmartAirsoft 4 ай бұрын
I think this happpened due to the lose hop up I think you can pressdown the hop up a little more and see if it solves the problem
@tarrlevente1
@tarrlevente1 3 ай бұрын
@@4UADSmartAirsoft The Hop Up bucking was not proper. I used Maple leaf Super 70, that is a bit shorter and tighter than the original VFC. Replaced Unicorn 80. Works fine with that.
@098JSNIPER
@098JSNIPER 11 ай бұрын
I’ve been always TM MWS believer. But now you made me wanna try VFC M733……
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Will need to do some fun tuning, but when it’s tuned its a beast
@Battle_guns
@Battle_guns 11 ай бұрын
Hi, I Also use DMR and I would like to know the jules you were shooting
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
2.8j
@anthonyrs8137
@anthonyrs8137 11 ай бұрын
Had the same problem with the buffertube. I screwed in a RS Mil-Spec tube and it work as should now. I'm testing different buckings now: W-Hold 70 deg. shot reasonably straight. Have the Modify X-range in there now, but that seems worse. Now the MR hop 70 deg, and Flamingo are left. What did you guys use?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
That is some nice I got to share too! Thanks man!
@wia7879
@wia7879 11 ай бұрын
I want to know the weight and speed of the BB bullet used in the 80m shooting.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g bbs and it was shooting 2.8j
@christownley5262
@christownley5262 11 ай бұрын
Great video…. I wish I had 1% of your skills. :)
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha you got it for sure
@samuraijutsu8876
@samuraijutsu8876 11 ай бұрын
I had that problem but it was the firing pin spring that had become deformed. The allen screw that holds the assembly down would back off and cause the assembly to lift and deform the spring. I replaced the spring and used locktite on the allen screw and never had the problem again.
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Poor decisions when it comes to production
@jhin5341
@jhin5341 9 ай бұрын
Greetings from Korea. I have a VFC M110 and am trying to make it a gaming machine using HPA. What hop-up rubber and inner barrel did you use? Currently equipped with Mapleleaf's 6.01 510mm and Mapleleaf 70 degree hopup rubber.
@4UADSmartAirsoft
@4UADSmartAirsoft 9 ай бұрын
For the bucking its actually the bucking we are working on and the barrel is just stock barrel, stay tuned you will see it very soon
@user-tl1el8sk6w
@user-tl1el8sk6w 11 ай бұрын
很棒
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
哇喔喔喔喔大感謝~~~~~我們繼續努力
@Noise-fe6dp
@Noise-fe6dp 11 ай бұрын
What did it chrono and what bb weight did you use for this test?
@Battle_guns
@Battle_guns 11 ай бұрын
Yes, please
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g and 2.8j
@ReachXDS
@ReachXDS 11 ай бұрын
so oddly enough my M110K1 does the opposite for some dumb reason it was over hopping with .40s, not sure what it's causing it but I assume it's the bucking or possibly the hopup adjustment, either way this video is very helpful in helping me take apart my m110 and putting it back together, thanks guys
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Anytime man! Glad we helped in someways
@TheBlackOpsFeeder
@TheBlackOpsFeeder 8 ай бұрын
I just got the vfc psg1, any way to increase range/accuracy? Im really lost in the gbb upgrade universe
@carlosyu7874
@carlosyu7874 11 ай бұрын
Great stuff as usual! How do u minimize the loosing hopup issue due to the heavy recoil on this gun?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Usually it happens when the o ring is too loose, I would replace it to another one so it creates a tighter fit
@sogerc1
@sogerc1 11 ай бұрын
Superglue and tissue paper you say? I'm gonna have to try that. Is that any kind of tissue paper? And what do you do if you need a thicker patch? Glue one layer on top of the other or do you fold the paper?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
It’s the kind of tissue we use to wipe our ass or clean our jizz lol and usually I just roll it to a ball and sand it into shape.
@Mk8airsoft
@Mk8airsoft Ай бұрын
ist the m110k1 internaly 100% the same with the m110 SASS from VFC?
@4UADSmartAirsoft
@4UADSmartAirsoft 29 күн бұрын
nope
@SomethingX13
@SomethingX13 10 ай бұрын
Love this channel. If possible, please review the Umarex HK M110A1 AEG. Heard its good and bad, would love to see your opinion.
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Thanks for the love buddy and will see if Vfc wants us to do that one
@eqneelam
@eqneelam 11 ай бұрын
Awesome! Could you do the VFC SCW9/APC9 too?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Will put it to my super long list
@MargiAirsoft
@MargiAirsoft 11 ай бұрын
I've heard that swiss cheesing the bolt carrier like you did could potentially lead to issues down the road, especially since GBBRs rely on the momentum of the bolt to properly cycle, cock the hammer, reset the trigger etc. Have you experienced such problems, apart from the ones you depicted in this video ? Nice one btw 👍🏻
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha sure and thanks for the feedback, actually the Swiss cheese only cut off 45g of the weight it didn’t do much to be honest, and for my Ghk when I switched to this super light 7075 bolt it did mess up the timing a little in which I have to change to a stronger recoil spring in order to keep the full auto stable.
@MargiAirsoft
@MargiAirsoft 11 ай бұрын
@@4UADSmartAirsoft How was the full auto less stable ? A light bolt carrier and weaker spring would be good for winter play but I don't know if that's actually a concern in Taiwan😅
@netaslive
@netaslive 11 ай бұрын
@@4UADSmartAirsoftI’m thinking of doing the Swiss cheese to a kwa 308 maten (larrrrge bolt) anything I should look out for? I’m very techy so lay it on me
@LukaBEET
@LukaBEET 3 ай бұрын
How much Joules per shot was that replica shooting ?
@sub2myonlyfaas105
@sub2myonlyfaas105 3 ай бұрын
Depends on bb weight. With .20 about 1.5J, with .43 I got 2.4J
@4UADSmartAirsoft
@4UADSmartAirsoft 2 ай бұрын
黑阿就那幾種
@dogedogego
@dogedogego 10 ай бұрын
did VFC fix all these issues? was thinking about getting one. i assume you gave them the feedback seeing how close to the VFC pentagon y’all are
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Yep they got it all fixed!
@dogedogego
@dogedogego 10 ай бұрын
@@4UADSmartAirsoft that’s great to hear! might pick it up when i visit there again for MOA
@jjsgame7683
@jjsgame7683 10 ай бұрын
看了都心累了,要修這麼多地方......話說為何槍機要鑽成那樣??輕量化?
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
那個別鑽了~我單純手賤效能也沒差哈哈哈
@wilson01131
@wilson01131 4 күн бұрын
Damn 80m!
@iluvsolim
@iluvsolim 10 ай бұрын
is angry gun's ar15 buffer tube is enough thread for this gun? i just bought m110k1 right now lmao
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
Haha I don’t know to be honest since I never tried it
@__Ratel_
@__Ratel_ 11 ай бұрын
Very impressive video!!! I wondering BB weight and FPS when you try 80m shot. Normally in S Korea, DMR use 0.3BBs, under 400FPS. Use NPAS very tightly and accuracy is suck. Very sensitive hopup.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha this one uses 0.45g and 2.8j output, it was a hot shooting gun and too hot for games
@bronco3292
@bronco3292 10 ай бұрын
@@4UADSmartAirsoft so the muzzle velocity is about 111m/sec?
@MultiGlam
@MultiGlam 11 ай бұрын
Any recommendations on hop-ups for VFC Avalons, or is it better to just leave it stock? I've used the Maxx Hop-up on my AEG VFC Saber but notice misfeeding ever since I started using it
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
It’s the dimensions that Maxxhop didn’t do well…. I had the same issue on my Ics. For this case you will need to mod your feeding nozzle length and for hop up bucking you can wait for our 4uad hop up bucking
@blackkait
@blackkait 11 ай бұрын
請問狙擊鏡的型號規格是?~謝謝
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Vector optics 2x10 forester
@belgianbadger8404
@belgianbadger8404 11 ай бұрын
can you guys do a video on the scar h from vfc
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Ohhh I want to do that one pretty bad!
@belgianbadger8404
@belgianbadger8404 11 ай бұрын
@@4UADSmartAirsoft yeah we need someone with youre skills to make it really reliable
@user-jx2lq2td9q
@user-jx2lq2td9q 11 ай бұрын
兄啊 你這把槍射出來的是雪罷(惱
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
哈哈哈哈
@fredericomendes5742
@fredericomendes5742 10 ай бұрын
Great work. Whats the power on the GBB?
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
2.8j with 0.45g and thanks for the like
@jchen966
@jchen966 10 ай бұрын
請問這把槍建議收二手全新的嗎? 我怕收到還沒修好問題的版本,建議直接買新的嗎?
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
收二手真的就要做好大修特修的準備,基本就是抽籤抽獎喔
@user-kk1xd9ps2h
@user-kk1xd9ps2h 11 ай бұрын
把hop皮上的凸耳剪掉不會讓Hop皮在Hop座裡面亂跑嗎?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
其實勾在槍管上就不會囉
@Jon.151
@Jon.151 11 ай бұрын
請問測試時用多少gram bb?另外大約多少動能?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g 2.8j
@FreeSpeeds
@FreeSpeeds 11 ай бұрын
請問HOP皮是用哪一種的,彈道表現滿漂亮的
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
嘿嘿嘿開發中
@a843433
@a843433 9 ай бұрын
看完之後超想把我的SR25交給你們幫忙拯救那貧弱的射程與左右飄移的飛向XD
@4UADSmartAirsoft
@4UADSmartAirsoft 9 ай бұрын
哈哈哈還是很有救得~加油等我們的皮
@DGworksIvan
@DGworksIvan 6 ай бұрын
彈重和出速?
@4UADSmartAirsoft
@4UADSmartAirsoft 4 ай бұрын
0.45g 2.5j
@DGworksIvan
@DGworksIvan 4 ай бұрын
@@4UADSmartAirsoft 🤣🤣🤣
@RAB-om9jy
@RAB-om9jy 11 ай бұрын
Great video, I've probably missed my chance to ask...but what weight and make BBs did you use? Apologies if you said and i missed it
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
No worries man I was using 0.45g bbs
@RAB-om9jy
@RAB-om9jy 11 ай бұрын
@@4UADSmartAirsoft Thank 6ou very much for the information and more importantly, your time 👍👍👍
@anno6969
@anno6969 11 ай бұрын
Would love to know what weight and what joules you are using
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g bbs and 2.8j
@maxlo9772
@maxlo9772 11 ай бұрын
不清楚GHK或VIPER TECH等其他廠商是否會推出像VFC的M110之類使用7.62NATO子彈的GBB步槍 幾乎每年VFC都會推出種類繁多的產品,也不僅是侷限在長見的5.56NATO子彈的AR步槍上,至於其他廠商通常只在現有產品上稍加改動,雖然製造過程有多了像鍛造的新工序,不過像是一般的AR步槍如MK18,只更換魚骨護木等等就再次推出,總有點了無新意~ 然而VFC雖然產品種類眾多,但品質似乎還不夠完善😂 不曉得其他廠商後續真的有再推出新的槍枝種類時會不會也有新產品品質不穩的問題~
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
我也很期待其他家出7.62的說~~~v牌是真的進步了不少~我們就等等看囉
@eljfica
@eljfica 11 ай бұрын
80m? no way you lies, count the number of fences to the end even if they are 3m long 45-50m maximum to the target🤔🧐🧐🧐
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha you are not wrong from the footage it does seem a bit short….and I don’t know how to show it more clear without affecting the presentation of the distance. I think it will be better for me the show it with our distance meter, and I apologize for forgetting to put that into the video.
@JaxMV
@JaxMV 16 күн бұрын
How did you increase fps on this gbbr up to 550fps?
@4UADSmartAirsoft
@4UADSmartAirsoft 9 күн бұрын
cut the nozzle valve a tiny bit or increase nozzle spring strength
@JaxMV
@JaxMV 9 күн бұрын
@@4UADSmartAirsoft How do you increase the nozzle spring strength?
@HappyH4x0r
@HappyH4x0r 11 ай бұрын
Hey iam not sure if ive missed it, but what gas you using, what joule/fps and which bbs are you using during the 80m test?
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g 2.8j and 12kg gas
@HappyH4x0r
@HappyH4x0r 11 ай бұрын
@@4UADSmartAirsoft nice bro, is it field legal? Here in Germany we mostly have outdoor 1.6 joules with assault rifles, around 2 joules with dmrs and 2,5joules with snipers Dmrs and snipers have minimum engagement of 20-25meters
@ETFootprints
@ETFootprints 11 ай бұрын
This video makes me wanna avoid VFC and go with Marui or GHK
@willtv805
@willtv805 11 ай бұрын
I heard ghk has a shit qc
@justinabulencia4392
@justinabulencia4392 11 ай бұрын
Newer VFCs are pretty good, plus they actually have spare components available. GHK from what I've seen in the HRC server are still suffering from their QC issues. But if you get anything pre-2020, I've heard they're the best.
11 ай бұрын
That's what I thought as well. A gun with those terrible threads doesn't belong in the market at those asking prices.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Haha they made some improvements and as mentioned this one is a old one, I’m sure they fixed all the problems by now
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Every airsoft gun company suffer from QC issue haha
@reaperairsoftgv53
@reaperairsoftgv53 Ай бұрын
What bb weight are using?
@4UADSmartAirsoft
@4UADSmartAirsoft Ай бұрын
0.45g
@reaperairsoftgv53
@reaperairsoftgv53 Ай бұрын
@@4UADSmartAirsoft thank you.
@reaperairsoftgv53
@reaperairsoftgv53 Ай бұрын
​@4UADSmartAirsoft and what was the joules?
@diamondmat4380
@diamondmat4380 4 ай бұрын
It use 0.2 bb?
@4UADSmartAirsoft
@4UADSmartAirsoft 4 ай бұрын
Nope it use 0.45g
@Williamjillballbag
@Williamjillballbag 9 ай бұрын
Pdi w hold bucking is the best
@4UADSmartAirsoft
@4UADSmartAirsoft 9 ай бұрын
Will see about that haha
@Williamjillballbag
@Williamjillballbag 9 ай бұрын
@@4UADSmartAirsoft more consistent hop and range
@user-xl1nu7jc4y
@user-xl1nu7jc4y 9 күн бұрын
BBsは何グラム?
@LeozillaChannel
@LeozillaChannel 11 ай бұрын
which weight bbs you test? thanks.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
0.45g
@longbowsiu6806
@longbowsiu6806 11 ай бұрын
VFC: Okay, 已收到你巨細無遺的回饋, 在下一版本的產品, 我們將進行關鍵升級….. 超級螺絲膠🫡
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
哈哈哈哈哈哈
@user-yu6sq6lg7v
@user-yu6sq6lg7v 10 ай бұрын
我愛VFC因為我沒有下場XD
@4UADSmartAirsoft
@4UADSmartAirsoft 10 ай бұрын
哈哈哈哈
@YIUYIUCHU173
@YIUYIUCHU173 11 ай бұрын
下壓點不足,可以換TNT組裝總成??
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
M110k1可以裝?
@thegloriousretardmagnet4257
@thegloriousretardmagnet4257 11 ай бұрын
I mean VFC does kind of suck when it comes to their AEGs. The externals are always super nice but the internals are absolute garbage. I owned a few and there are guns for half the price with better internals. They are just way too expensive for what you get, BUT they have markings... The GBBRs are okay for the most part in my opinion.
@4UADSmartAirsoft
@4UADSmartAirsoft 11 ай бұрын
Time for Vfc to work on their aegs
@user-ur9zm5px4o
@user-ur9zm5px4o Ай бұрын
這把內管多長
@4UADSmartAirsoft
@4UADSmartAirsoft 29 күн бұрын
450mm
0nce h00man 🧬 | I | #495 ✮ 🐈 ✮ uwu
3:53:22
MeewGeo
Рет қаралды 134
Survive a game with Grenades only!| Acetech Acehive X Spawner | The Honest
21:37
Ik Heb Aardbeien Gemaakt Van Kip🍓🐔😋
00:41
Cool Tool SHORTS Netherlands
Рет қаралды 9 МЛН
Running With Bigger And Bigger Feastables
00:17
MrBeast
Рет қаралды 169 МЛН
OMG what happened??😳 filaretiki family✨ #social
01:00
Filaretiki
Рет қаралды 13 МЛН
Joker can't swim!#joker #shorts
00:46
Untitled Joker
Рет қаралды 41 МЛН
I Made Real-life Airsoft AIM-ASSIST: Aimbot V3
25:19
Excessive Overkill
Рет қаралды 1,4 МЛН
The Only Way Germany Could’ve Won WWII
20:57
AlternateHistoryHub
Рет қаралды 256 М.
The Solothurn 20mm Anti-Tank Rifle
14:44
Kentucky Ballistics
Рет қаралды 3,1 МЛН
Underwater Kamikaze
15:10
Yarnhub
Рет қаралды 306 М.
I Made A Cybertruck A REAL Halo Warthog
12:07
Brandon Herrera
Рет қаралды 429 М.
How Are Czech Gun Laws? (and Gun Stores)
25:31
TFB TV
Рет қаралды 663 М.
Ik Heb Aardbeien Gemaakt Van Kip🍓🐔😋
00:41
Cool Tool SHORTS Netherlands
Рет қаралды 9 МЛН