Broken Glass to Beautiful Bowl, Fused Glass Project Tutorial

[@StephFuses]

I have a pile of scrap, that I've been trying to figure out what to do with. I think I might try this

[@RocketRoseArt]

Perfect project for scrap. Have fun.

[@JG-rq1ws]

Hi Jeff, thank you again for the great video. Just a quick question: Did you “pile up” the tecta to make a double layer of glass (6 mm) and did you cut the black 6-8 mm wide so it was put at the edge of the glass or you double layered the black as well? Thanks a lot.

[@RocketRoseArt]

Some of that scrap was actually 6 mm. In fact, it was a mix of 6 mm, 4 mm and 3 mm. It didn't matter as the layer was well over 6 mm. This is why the black strips were a bit more than 6 mm wide and placed on edge, to account for the height of the glass. Only a single strip. Because I wasn't intending to do a full fuse, the 6 mm rule doesn't really apply. I just wanted it tacked together. The final thickness was from 6 mm to 8 mm, but remember it's not a solid piece. If I hadn't let it go further the thickness would have varied much more.

[@JG-rq1ws]

@@RocketRoseArt Thanks a lot.

[@joangrant5248]

Hi Jeff, I have just spent a pleasant morning laying this out with clear glass. I like your idea of using coloured transparent or opalescent. I think I might try white opalescent. I have just noticed that you used strips of black glass. I just used stringers.

[@RocketRoseArt]

Hi Joan. The 3 mm on edge gave me a more defined border between the sectors. I thought stringers would get buried by the clear, though I suppose it depends on how many stringers together. The white contrasting with the black sounds like it would work nicely. All the best with it.

[@janetostinelli1023]

Can you post the tack and slump firing schedule. Thx

[@RocketRoseArt]

Hi Janet. The firing schedules are in the video description.

[@annel1181]

Thank you Jeff. This is a brilliant project for using up scrap glass. And your design is so interesting. I hope to make a bird bath using this technique. Thank you for the inspiration.

[@RocketRoseArt]

Hi Anne. The bird bath idea sounds great. Good luck with it.

[@laurakoeper3399]

I made one of these based on this video and I love it so much. You’re my favorite glass artist to watch on KZbin. Thank you so much, Jeff! ❤️❤️❤️

[@RocketRoseArt]

Hi Laura. That's fantastic. Very happy to help.

[@sherrirowan5049]

It looks amazing. Even if you think you left it in too long ❤

[@RocketRoseArt]

Thanks Sherri.

[@janetostinelli1023]

I tack fused the bowl and it came out with a Lacey effect so disappointed

[@RocketRoseArt]

That would be disappointing. I think you're saying it fused too much and melted together more. Sounds like the firing was too high or too long. I noticed you asking for the schedules in another comment so I assume the one I posted in the description isn't what you used. Try that one but be sure to correct for your COE and kiln. Hope this helps.

[@jerifeig1777]

Question, the mold you ended up using, can you tell me where you purchased and the model number? Enjoy your videos. Thanks😊

[@RocketRoseArt]

Hi Jeri. Wish I could remember. But probably either Blue Dog Glass or Glass Fusing here in Australia. I just looked at each site and it seems they don't have anything. Not surprised, a lot of problems with supplies here.

[@jerifeig1777]

@@RocketRoseArt Hello, I understand. Having the same issues in the US. Been trying to find an 11 inch bowl mold for some time. Appreciate your reply. Cheers, Jeri

[@melborrow]

Love this - so many ideas of using up scrap glass doing them .. going to try and do it with putting a shape in the center of it -

[@RocketRoseArt]

Great idea. BTW, love the lodge.

[@melborrow]

@@RocketRoseArt Thanks! We have had a great time meeting all of the people from all over the world :)

[@stephenho6007]

I yet have to learn, but acquired a nice glass kiln already. Question: The bowl you put at the bottom as a mold, is it a special made? or just any un-grazed ceramic will work? Thank you.

[@RocketRoseArt]

Hi Stephen. You are right. That is just a bisque fired ceramic bowl. In fact, you can use almost any old ceramic bowl for a mould. As long as it's prepared correctly. This video covers that. kzbin.info/www/bejne/i3KToZh7p9Celdk

[@uglypatriot5171]

Love the chunky look, turned out better than I thought it would. Will give it a go. Cheers. Q. Have you ever tried using kiln wash from a spray bottle to coat your moulds? Any reason why a few layers of kiln wash sprayed on wouldn’t work? Certainly would be a cheaper option than boron nitrate. I use Zyp liquid boron nitrate sprayed from a spray bottle, can’t see why Kiln wash applied the same way wouldn’t work 🤷🏻‍♂️ unless kiln powder is thicker or sticker 🤷🏻‍♂️. Your thoughts? Cheers Jeff

[@RocketRoseArt]

Hi Ed. I used to use kiln wash brushed on a long time ago. Hated it. Always got damaged and had to be redone. Never tried from a spray bottle. Can't try now as all my moulds have boron nitride on them and you can't go back to wash. If you give it a go would love to hear how it went.

[@rosannepainter6766]

Love it!

[@RocketRoseArt]

Glad you like. Take care.

[@dianacline4447]

Thank you Jeff. I was thinking I would have to use a drape mold to maintain the texture, but now I'm going to just use a flatter shaped glass bowl and hope for the best.

[@RocketRoseArt]

Good luck Diana. Hope it all goes well.

[@jeriz6474]

Oooooo, so sparkly! I love the textured look and feel. I did get my kiln dialed in closer to make the glass keep its shape. Thank you for the tips.

[@RocketRoseArt]

Hi Jeri I'm always getting distracted. Too many things to do.

[@JudithMcFadden]

Another video of a really fun technique. What a beautiful bowl.

[@RocketRoseArt]

Hi Judith. Nice and simple. Hope you give it a go.

[@sopradordevidropioneiroNordest]

Brabo

[@RocketRoseArt]

Thank you.

[@catherinehoward1102]

I got an awesome result when I tried this! Thank you so much

[@RocketRoseArt]

Hi Catherine. That’s fantastic.

[@jokappel2430]

I love this Jeff, so many ideas, and finally found the join button

[@RocketRoseArt]

Hi Jo. Thanks for joining and hope it helps.

[@jwall6006]

I think, at least with my art, when things don’t go the way my mind planned, they’re usually better. It’s a beautiful piece.

[@RocketRoseArt]

Have to agree. Maybe we should plan to stuff up 😀

[@moniquehargrafen4821]

There are only happy mistakes

[@merigriesbach6549]

Hi Jeff. Thanks for these videos. They are very helpful. Can you please tell me where I can buy boron nitride in Australia? I’m finding it hard to source.

[@RocketRoseArt]

Hi Meri. The only place I found in Australia is Perth Art Glass, and the last time I looked they were out of stock. Worth a call though. I actually had to import a carton for myself. At the time I couldn't find anybody myself. In Australia it's classified as dangerous goods, so needs correct carriers. Not sure how Perth Art Glass do it. Keep in mind this is a hazardous material and needs care.

[@RocketRoseArt]

Update to that Meri. Just called Perth Art Glas and the brand they sell doesn't seem to have a flammable solvent. Delivery should be fine, but out of stock at the moment. Stock is expected in maybe a month.

[@merigriesbach6549]

Thankyou for replying so quickly. I will contact Perth Art and see if I can get on an advice list when it’s back in stock. ☺️

[@tracyperry3238]

Definitely am going to give it a go. Love yours

[@RocketRoseArt]

Hi Tracy. You absolutely should. Not hard at all. Good luck with it.

[@gwenpetersen5452]

Love it! I’ve made similar pieces but never thought to put in the long strips and stand them on their side. Thanks for the tip.

[@RocketRoseArt]

Hi Gwen. There's a few ways of doing this. You could also replace segments with whole cut pieces as well. A lot of options.

[@gwenpetersen5452]

@@RocketRoseArt Thanks Jeff, that’s exactly what I did then hung it as a large sun catcher. I think it would be lovely with a few pieces of dichroic frit mixed in the piece.

[@lolomorr6563]

I think it turned out lovely.

[@RocketRoseArt]

Hi Laura. Thanks. It's always nice to have feedback.

[@theresajukiewicz3092]

That’s amazing!

[@RocketRoseArt]

Thanks Theresa