“…as long as you’re careful, it’ll be alright.” Literally 90% of impact gun usage 😂
@JUNEBUGLLC Жыл бұрын
Bolts never coming out 😂
@loktom406811 ай бұрын
He's doing just fine.
@luisderivas60059 ай бұрын
@@JUNEBUGLLC By the time it needs to come out again, the whole hub will need replacing anyway.
@KeleYpu-hn9tm27 күн бұрын
😊😊😊😊😅😅99999
@rayoliver7120 Жыл бұрын
my 45+ yrs as a seasoned technician, change them all out , cause the others have taken abuse also . U might think it's good and if you have to wait to see the stud in a different shape to replace then u have no clue in the world , replace replace cause it does cause undue stress on other studs what's a few more dollars when it comes to safety..... to many slackers calling themselves mechanics well I'm a technician seen it all done it all ..... u should see what damage a wheel does when it flies off a vehicle at 75 or 80 mph ..... then you'll change your mind !!!
@KINGOFFILMSDUDE Жыл бұрын
I was going to suggest that too, seems a bit silly to not replace them all given its a 2min job.
@cbmech2563 Жыл бұрын
I would have replaced them all but I would have put never- seez on the threads. As a heavy truck mechanic I've replaced a lot of studs with galled threads as well as broken ones.
@straight-up-shots Жыл бұрын
$7.50 might be too steep
@brandonwilshire7837 Жыл бұрын
@@cbmech2563 you never should put anti seez on lug threads that’s how you get someone killed and or more broken studs after all the lug nuts fall off
@Iamdark1234 Жыл бұрын
@@brandonwilshire7837 ?
@snmcdonald5 ай бұрын
No BS video. Straight to the point. It's hard to find videos that are this. 🔥
@brandonwillis47624 ай бұрын
I agree
@spencerwh123 Жыл бұрын
For anyone wondering the air tool used is called a “Super Duty Air Hammer” made by Snap On part number PH3050BR
@cbmech2563 Жыл бұрын
4lb harbor freight sledgehammer works great for me
@Fiden6666 Жыл бұрын
And they can keep it, and I'll keep my arm and leg. F snap on!
@garymitchell3590 Жыл бұрын
And that SnapOn costs 3 times what it's actually worth.
@robertg9334 Жыл бұрын
What's the necessary psi on it
@robertg9334 Жыл бұрын
I'll take my cordless milwaukee
@CJLienert Жыл бұрын
Damn I'm not mad at the impact I'm more surprised you have the actual tool to install those studs
@mtraven23 Жыл бұрын
careful = make sure the head doesn't spin. he didn't mention it, but you can see him align the teeth & get it all snug before he hits it with the impact, thats key
@benztech2262 Жыл бұрын
I have the same bearing stud installer but I used flat washers for years. Just stack at least 3 and put grease on them.
@UnrealKinniki Жыл бұрын
Same! I've got some old washers sitting around that I used to use, worked fine. Finally got a stud installer itself.
@blakefindlay1870 Жыл бұрын
It’s crazy what having the right tools will do for a job. Can’t even imagine how many people didn’t have an air hammer to get them out that easily
@bystander1489 Жыл бұрын
One smack of a hammer and they fly out
@AlmadabesАй бұрын
Mine came out with a couple whacks of an old rusty hammer. Free and easy.
@StampIt2X7 күн бұрын
I used an old hammer as well
@agustinlopez5048 Жыл бұрын
Awe man I changed the whole bearing I didn’t know you can only change the studs
@pollux2825 Жыл бұрын
some cars you can’t replace just the studs
@MWilk098 Жыл бұрын
Bearings are wear items. Best to have new ones.
@Reginald-Erasmus Жыл бұрын
well you havint really lost much by doing that bro even if the studs could come out, atleast you have a few less things to worry about for the near future
@ismaelsalazar6199 Жыл бұрын
At least ur driving smoother now! 😎
@kendallwillis2862 Жыл бұрын
I made the same mistake like 2 weeks ago my other side broke and I watched a video and seen I could just change the studs made life so much easier
@kroz2310 Жыл бұрын
You're a stud in my book! Job well done 👍
@white9th193 Жыл бұрын
The right tools make all the difference . Gives me a chub just watching 😊
@briankissel7661 Жыл бұрын
Two of the most critical fasteners on the car. There’s always time to do it wrong.
@ryanallen5334 Жыл бұрын
How is that wrong? That is the only way to do it. 😂😂
@fusiondew Жыл бұрын
You’re technically supposed to change the broken one, then the 2 studs on either side of the broken one. So on a 5 lug that amounts to all of them.
@troywesterbur706 Жыл бұрын
To anyone that says not too use an impact has never turned a wrench for a living. Some days your hands will hurt from using them. So anything that helps like impacts padded handles. Work smarter not harder
@Jamals13 Жыл бұрын
You gotta change all the studs my man. Its a known thing in service manual if one stud breaks you have to replace the two beside it at least but in this case that means all of them on that hub .
@KanekiGhoulz Жыл бұрын
Definitely agree but the customer probably didn’t want to pay for all that so the mechanic won’t pay out-of-pocket to do all of them even though they really should and they know it
@Jamals13 Жыл бұрын
@@KanekiGhoulz if that was the case the mechanic should have refuse to repair it, like a lot of us do. I have refused to repair customers cars in the past we are held liable.
@Lauren-ie5my10 ай бұрын
if your studs thread is just fucked up are you okay? i assume it would be fine to just replace one because mine isnt broken its just the thread got fucked up.
@jacobdunnohew2310 күн бұрын
@@Lauren-ie5my same
@sgomez3047 Жыл бұрын
That air hammer is Da Shizz!..I "NEED one of those!! 😅 ok, I would like one . The cool factor.
@nyctoshade63028 ай бұрын
After working at Subaru and changing as many studs as express did oil changes, I can confirm this method is quite effective.
@codewalters Жыл бұрын
Thanks . Well done . Appreciate the explanation
@Alashkid Жыл бұрын
I didn't know it's changeable until yesterday when I broke one at the workshop 😅 and now I'm coming across this video today
@Fatphobic. Жыл бұрын
Pro tip, if you don’t have a wheel stud installer put grease on the hub and between a couple washers then use the lug nut backwards (flat side to hub if possible) to pull the stud in easier with damaging stud/nut
@davidtayloromara5 ай бұрын
Oh no shit. Thanks for that
@driftsdragsdrives4938 Жыл бұрын
Anyone else jealous he can fit an impact in that particular vehicle. Try working on a German car. You’ll need a TRIPPLE square 3 extensions 2 universals and a therapist.
@greenmountaingrower4680 Жыл бұрын
I've done these never used one of those wheel stud installers tho always just used an extra lug nut I got kicking around in my tool box.
@geoffjefe20009 ай бұрын
The stud installer tool (I used the one by Lisle) worked great. Just some light machine oil on the stud and lug nut and a 24” long breaker bar was all it took to pull the new stud into place. No impact wrench needed. And that means I didn’t damage the lug nut that I’d used to pull the new stud into place.
@PrajithKumara Жыл бұрын
Nice. I like this mechanic job
@Handleoriginal1211 ай бұрын
Thanks for the video. My mechanic damaged one of my wheel studs without telling me and now I’m having to change it since he won’t accept responsibility for it.
@dapper_gent Жыл бұрын
I've used a jam nut method for this one. It works when you don't have air tools!!
@rockytop4 Жыл бұрын
A bolt is a spring as long as its never over tourqed theyll last forever.. use a gd tourqe wrench cod
@philipbuerkle8 ай бұрын
Wow your a genius!!
@michaelchapin1976 Жыл бұрын
If 2 are broke, then you should have replaced them all because the others are likely just as bad.
@jayking22256 ай бұрын
Perfect job right tools, but u did pick that hub cause it was an easy one. Sometimes, u have to cut the stud due to no clearance and shave down a flat spot on one side of the new stud for installation
@mrcrowleyoz Жыл бұрын
I do that shit by hand,,,you can also use the circle part of a key wrench to leverage the nut in order to pull the stud.
@enzoperruccio Жыл бұрын
Here's another tip: don't use an impact on wheel nuts. Torque them as hard as you can by hand using a regular lug wrench, use your foot and your body weight to loosen them. No more broken anything.
@balothtower7 ай бұрын
Unstructions unclear: lugs torqued to 300 lbs because I'm a fucking beast
@tythekoenigseggenthusiast2573 Жыл бұрын
That air hammer knocked those studs out quick
@winfriedkloeser3244 Жыл бұрын
For those using never seiz. Especially if on aluminum rims reduce torque by 10% and you will be fine.
@nodak819 ай бұрын
I know I've had to do that job on one of my cars but I'll be damned if I can remember when or what car! Makes me feel old.
@christiangraham4579 Жыл бұрын
I’ve always pulsed a half inch air impact and never had a problem. For the past 20 years.
@czierwo Жыл бұрын
Lug nut installer 😂 When I stripped mine, I went to nut/bolt store got a bunch of washers big enough and a nut with same tread pitch. Ran me less than $1 to install the lug nut lol!
@checo8187 Жыл бұрын
Use a 1” socket
@StampIt2X7 күн бұрын
How much bigger do you want the washer over the bolt
@Peachykream Жыл бұрын
those splines generally line up, in my experience. I have no idea If that's on every car, but I'd definitely be cautious of that.
@alphaalchemy27364 ай бұрын
So helpful! Thank you
@AnAZPatriot Жыл бұрын
I never let any mechanic near my lugs and studs with an impact when putting them back together. You can take them off with an impact, but you better do it correctly when putting them on. I've been burned too many times.
@spencerhermanson4639 Жыл бұрын
You can correctly put them on with an impact though.... you literally watched it happen correctly
@AnAZPatriot Жыл бұрын
@spencerhermanson4639 You can also screw them up. No chance of screwing them up if it's done the right way, not the fast way. As I've said, I've been burned by "technicians" doing it this fast way. If they want to do it this way, they don't get to touch my vehicles or my pocket book and I'll go somewhere else.
@spencerhermanson4639 Жыл бұрын
@AnAZPatriot the thing is if we do screw it up, at least at the shop I work at, we have to cover it, and have a 15k mile 3 month warranty.... coming from experience once you've done it enough it's very hard to screw up, new techs should take the time to feel it out but once you've done hundreds...
@AnAZPatriot Жыл бұрын
@@spencerhermanson4639 Both times the shops made me eat it, made up excuses like "how do we know YOU didn't take it home and screw it on wrong?" I stand firm in my position.
@spencerhermanson4639 Жыл бұрын
@AnAZPatriot my shop owner would not ever accuse the customer like that, especially if it was noticeably our fault. I'd have the most uncomfortable lunch break ever
@fjb4750 Жыл бұрын
And GO with the “I WOULDA’S” 😂😂😂😂😂 Well now “I WOULDA” done it the exact same way. Good job👍🏻 Love those stud installers. I’ve never used anything but an impact on them. Merica
@derbykingdom7217 Жыл бұрын
Lmfao. Go back to bed
@angelcintron2122 Жыл бұрын
I'd change them all at this point, but, that's just me 😂
@lamontbest16939 ай бұрын
Serrated stud keeps the stud from turning. The force of drawing it down with the nut acts like a press and pulls it into place.
@perchancethishandleiswens Жыл бұрын
Okay, but seriously asking, what should one do to prevent this?
@madunwerkstatt3093 Жыл бұрын
Torque lug nuts to spec, carefully read the manual if the manufacturer specifies to use lubricant or anti seize compound, or leave it dry.
@oogie149 Жыл бұрын
Idk if cars are the same but on trucks with 10 studs if one stud is messed up you change the two to either side of the broken one and if you have 3 or more you do all 10
@Chris-zm7wh Жыл бұрын
The serrated ends hold in the hub ya dope
@johnnyhotrod Жыл бұрын
Air hammer a great tip,thanks!
@OwenC1 Жыл бұрын
He was so careful to use tb right tool to install the studs… but uses an impact for the nuts
@JeffDeWitt Жыл бұрын
Nothing wrong with that as long as you do it right, which he did.
@zqwas63068 ай бұрын
I don’t hate the air impact but maybe a 3/8 electric impact in speed 2 is the way to go
@arlochristman86688 ай бұрын
Great job 👏 don’t listen to the hater’s 😂
@jattsaab-ov2px Жыл бұрын
Do you have to do anything to the brakes after bleed or nothing ??
@ryannechvatal98889 ай бұрын
The thumbnail is cool
@DTWMTX Жыл бұрын
Tool??? Couple washer work, cheaper too!!!
@MrGreens1234 Жыл бұрын
Air hammer is my favorite tool to use for sure; any opportunity I get.
@robertsebastian787 Жыл бұрын
Thank you for sharing that!
@Chevydude19828 ай бұрын
its designed to u an impact on it,thats why its made like a thrust bearing.
@londzale3163 Жыл бұрын
Have you seen the video where the guy traps killer hornets with Krazy glue? It’s amazing
@dylanm28012 ай бұрын
I just use an old rotor and lug nut to press it in but good shit!
@martysomers18247 ай бұрын
That tool actually won’t let you go past a certain amount of torque I’ve tried good installing tool…
@shabeermahar5898 Жыл бұрын
Little grease on those splines of the stud would be helpful
@malakibeatty5044 Жыл бұрын
Replaces studs “hammers lug nuts on with impact” I don’t understand why people don’t use torque wrenches 😂
@adrianmora7033 Жыл бұрын
Because impacts are quicker and do the job
@davidyoung2457 Жыл бұрын
You spelled believe wrong
@asherlol7666 Жыл бұрын
torque wrenches are not real world. we pull them out for lug nuts with keys, and head bolts. injector hold downs. that kinda stuff. i’ve put on 1000s of wheels with my matco 1/2 inch turned all the way up @ 150psi. never broken or stripped a stud. u learn ur impacts behavior when u do this everyday.
@warrenself Жыл бұрын
@@asherlol7666 I worked at a Ford dealer quick lane for over a year, and not a single torque wrench was used on a wheel lock. I do recall one situation of a key getting destroyed and a tech needing to air and manually hammer and chisel them all off though.
@joel.3112 Жыл бұрын
@@asherlol7666 So true anybody that's a impact hater has not much experience!!! And that's facts 💯
@joeyv43017 ай бұрын
What is the tool that knocked the studs out?
@jonathantaylor6926 Жыл бұрын
The tire place just broke a wheel stud on my truck and KZbin sends me this short 5 mins later.
@phxrsx Жыл бұрын
They know.
@Sliccalphaomega2 ай бұрын
What tool was that that knocked the stud out ?
@OKBAOK Жыл бұрын
Good to discover 👍🙂
@edgarhernandez5345 Жыл бұрын
Excelent!!! 👍🏻
@johnbrooks2122 Жыл бұрын
Mine 2007 Malibu will it work like that or have take off hub?
@aGnarletoenail Жыл бұрын
Using an impact to install, it is perfectly fine because you use an impact to remove a police lug nuts on I would hope. And then talk them down with a torque wrench after
@3starperfectdeer2332 ай бұрын
"As long as your careful, its ok" *car implodes and then explodes*
@ledger35 Жыл бұрын
Although I already know the tool used for this, it would be nice to let your viewers know as I’m sure they might have to use one someday.
@weirdgamerincxpected2882 Жыл бұрын
Never ever had to tear front end apart to replace studs. Only had to pull tire off to get access
@stockstnt84 ай бұрын
What did you use to push that out is that an impact hammer of some kind
@jackhfletcher4 ай бұрын
Yes, it’s an air hammer.
@6sensory Жыл бұрын
Wish you'd would've put a iron piece behind the hub to take the impact OFF the DAMN BEARING while you were hammering
@tubleejthoj65952 ай бұрын
Great tips
@randysgut3214 Жыл бұрын
how many ft lbs torque? all of it
@ryanallen5334 Жыл бұрын
Does anyone remember the older GM cars where the replacement stud had some of the lip shaved off the end so you could fit it past the knuckle and into the hub?
@Karlie-s3v6 ай бұрын
I had to do this to my truck in my boss's driveway after work. She came out to see what I was doing and was like omg!!??? I said I'll have it out of here in an hour 😊
@jairoavellaneda5892 Жыл бұрын
so i changed one of my rear dif axle and i had to install my studs but i just used a huge hammer🙃 never knew they had that tool
@The3DTutors Жыл бұрын
What was the tool he had to knock the studs out with 😲
@tyronnfields7945 Жыл бұрын
I do it all the time with an impact 18yrs experience.....
@robertsebastian787 Жыл бұрын
Very helpful!!!
@JohnBruno-yi1ex2 ай бұрын
Why did they break?
@AM-vc3de Жыл бұрын
What if i have no space to push the new stud in?
@virtualax2k626 Жыл бұрын
Are you not supposed to use thread locker or anti seize? just wondering
@checo8187 Жыл бұрын
On what? The studs? The studs hace no treads.
@virtualax2k626 Жыл бұрын
@@checo8187ahhh, ok… Awesome 👍
@brandonbaker7468 Жыл бұрын
Show a hard one where you either gotta pull the hub out or cut the dust shield lmao
@shabeermahar5898 Жыл бұрын
Yup, such as Honda Accord or Civic 😅
@Jerry-jzg Жыл бұрын
What tool you use to remove the studs?
@christianbell4413 Жыл бұрын
“How much time does it take to change my two studs?” “It won’t” “How muc…” “All done”
@Proj3ctLife7 ай бұрын
I used an impact for all of 20 of my extended studs and not a single issue.
@unintendedpurposes Жыл бұрын
Though i agree that you can install the stud with your impact, you should definitely use a torque stick so you dont stretch the threads. Takes 2 seconds and it makes the studs last forever. Youre replacing these studs because people with that mentality keep over tightening the nuts with their impacts 😆
@stevenmoore8985 Жыл бұрын
I just replaced my wheel studs on my car at my shop and used a big enough nut of a old car instead of a tool and used my impact after hand tightening the my wheel nuts
@atrix9506 Жыл бұрын
Do I have to bleed my breaks after
@stevenmoore8985 Жыл бұрын
@atrix9506 no since ur not replacing brakes
@Extendedclipzs5 ай бұрын
How much would this cost ?
@jamesjanik58785 ай бұрын
What is that snap on tool he's using to push the studs out?
@adalh.castro44324 ай бұрын
Pneumatic hammer. I think.
@FNEARN254 ай бұрын
$700 snap on Air Hammer
@nhbountyhunter Жыл бұрын
Why do people care about impact so much on wheels? My entire life and my father (ase Ford tech and Ford warranty rep) entire life that is how it's been done. Just don't over tighten. If you know your tools there is no issue, ftlbs is ftlbs come from an impact or ratchet\bar makes no difference. It's like saying a GMC will put prefrom a Chevy or last longer. Again I know setting 1 is 100ftlbs on my 1\2 impact. That will not hurt a wheel stud
@theronhildebrand5925 Жыл бұрын
What’s the name of that tool to remove those studs?
@jimbob18009 ай бұрын
Sometimes those will studs are not always easy to put in
@a5ad_m10 ай бұрын
Just replace the hub?
@cinezurdo4 ай бұрын
Meanwhile, me with no air tools using a tie rod remover and breaker bar to press them out over the course of 3, back breaking hours
@lightwork4443 ай бұрын
Aint no way that gun actually pulled that stud in.
@themagpie_19 ай бұрын
we call the rotor a brake disc in uk. as that is what it actually is..