Bronco FORScan | Remove Double Honk | Enable Fog Lights With High Beams | Recalibrate Speedometer

In this video we will disable the Bronco's double honk, enable fog lights with high beams, and recalibrate the speedometer for my bigger tire size.
If you get error codes after performing the above, you may need to do a relearn. Please find the instructions below on how to do it: forscan.org/fo...
𝕃𝕀ℕ𝕂𝕊 𝕋𝕆 𝕋ℍ𝔼 𝕀𝕋𝔼𝕄𝕊 𝕄𝔼ℕ𝕋𝕀𝕆ℕ𝔼𝔻 𝕀ℕ 𝕋ℍ𝕀𝕊 𝕍𝕀𝔻𝔼𝕆 𝔸ℝ𝔼 𝔹𝔼𝕃𝕆𝕎.
FORScan Tool: amzn.to/3orGzRR
buckleupoffroa...
**SEND US MAIL**
PO BOX 658
Sydney, FL 33587
𝔽𝕠𝕝𝕝𝕠𝕨 𝕦𝕤!
www.buckleupbu...
/ buckleupbuttercuptv
/ buckleupbuttercuptv
/ buckleupbuttercuptv
BELOW ARE LINKS TO OUR MOST ASKED ABOUT PRODUCTS THAT WE RECOMMEND:
𝔽𝕠𝕣 𝕋𝕙𝕖 𝔹𝕣𝕠𝕟𝕔𝕠:
RTR Tech 6 Wheels for Bronco amzn.to/2UWPmRc
BFG KO2 Tires for Bronco amzn.to/3BP2nN8
JBL Bass Pro Go amzn.to/3BHvTUZ
𝔽𝕠𝕣 𝕋𝕙𝕖 𝕋𝕣𝕦𝕔𝕜:
RetraxPRO XR Retractable Truck Tonneau Cover:
For F250-350: amzn.to/3cjXGzR
For F150: amzn.to/3qWBykm
Bike Rack for Truck: amzn.to/2O65VX0
Rhino Rack for the Truck: amzn.to/3hweDdZ
𝕎ℍ𝔸𝕋 𝕎𝔼 𝕌𝕊𝔼𝔻 𝕋𝕆 𝕄𝔸𝕂𝔼 𝕆𝕌ℝ 𝕍𝕀𝔻𝔼𝕆:
Our Drone: amzn.to/3lrHpwi
Our Camera: amzn.to/31eOXwi
Phone used to Record: amzn.to/3uVkqxD
As an Amazon Associate I earn from qualifying purchases.
#Ford #fordbronco #buckleupbuttercup #buckleupbuttercuptv #buttercupbronco #broncomods #bronconation #bronco6g #offroad4x4 #offroad #fordbroncodaily #fordsofinstagram #ford4x4offroad #2021fordbronco #newbronco #broncos #fordperformance #pickenspartyof5 #pickenspartyof5bronco #travel #rvlife #2022fordbronco #fordbronco2022 📫✉️ SEND ME MAIL 📫✉️
Buckle Up Off-Road
ATTN KRISTA
3200 Hanson St.
Fort Myers, FL 33916

[@eastendyves]

Thanks! I just disabled the double honk and my life is already better! I bought the Forscan 1 year extended license for $12 because I didn't have the patience to wait for the free one... it took about 5 mins to get.

[@AB1DE]

Followed your instructions word by word. I got some warning lights, check 4x5, etc. big PITA.

[@BuckleUpButtercupTV]

You may need to do a relearn. I will find the comment on how to do it and post it here for you. Not sure why it does that for some but not others.

[@EllenPurchaseFord]

@@BuckleUpButtercupTV , did this for me too. I am only did this because it looked like a trust worthy video. Please send immediately. My tires are large but well within factory. Says to service 4WD.

[@collinknox6005]

How do you relearn?

[@kirkeric]

Just bought my Bronco about 3 weeks ago and the honk got me from day 1! Thank god for this. I've ordered that ODB unit and can't wait to get rid of the honk. Thanks! Also subscribed.

[@BuckleUpButtercupTV]

Thank you! Double honk has got to go lol

[@kirkeric]

@@BuckleUpButtercupTV Hey, I got the module and working on it but I think it might be helpful to add some notes. There are several steps missing that the average Joe may not figure out. I thought it was self installing but that's just the drivers. Must install the application to access too and then it gets very quirky before connecting. Some back and forth a few times with that toggle and the configuration button, you reference however the video is of your face when you click the button. Lol. I found the right one but the big thing is, you need an extended license to use the feature necessary for turning off the horn, etc. If the short trial one works, I hope to have this resolved. Otherwise, appears it needs to be purchased. Wishing for best now! 😀 UPDATE: The temporary license was emailed to me in about 30 minutes or so, downloaded the key and entered in the window. I was able to turn off the ole double honk finally!

[@ericwaginger727]

Hey Pickens Party of 5!!! I just wanted to thank you for your content! I just took possession of my Badlands Sasquatch Bronco today from the dealership (I watched the car hauler pull up with it 🤣) today was a fantastic day after a 400+ day wait after I made my reservation. Your videos helped me through the long wait and I just wanted to say thank you! Keep up the good work!

[@BuckleUpButtercupTV]

Congratulations!

[@BuckleUpButtercupTV]

Thank you and I hope you’re enjoying your Badlands!

[@kona2day]

After reading about the GOAT mode modification you can do (getting all the GOAT modes for your Bronco) I am definitely getting one of these. It's great you guys are putting out these videos. They are very informative and show all the great things you can do with your Bronco. You guys ROCK!!

[@BuckleUpButtercupTV]

Thank you! We need to mess with the goat modes a little more and will post a video

[@gerryviator6561]

Hey great video's. FORScan gives error with that cable for my 2022 bronco wildtrak...had to order one that FORScan recommended. now is 2 months free with extended license. Thanks again on the video's.

[@toecutter1280]

i just installed the autostop eliminator last night and it works flawlessly you wont be disappointed

[@BuckleUpButtercupTV]

Thanks for the feedback

[@mpeugeot]

HS-CAN is high speed network, MS-CAN is low speed, some modules will only communicate in high speed and some only in low speed. CAN stands for Controller Area Network.

[@BuckleUpButtercupTV]

Thanks, now I know. I figured someone would!

[@mpeugeot]

@@BuckleUpButtercupTV I am obviously a raging geek.

[@BuckleUpButtercupTV]

Nah, just smart!

[@greybeardbaldgamer]

That double honk gets me all the time!

[@BirdDogOffRoadAdventures]

Weird that I was just downloading the program to my MacBook Pro when I saw this video, lol. Will definitely use this video as a reference, thanks for sharing. I'll for sure watch the auto/off video when you add it!!!

[@BuckleUpButtercupTV]

How funny!!! Hope it all goes smoothly!

[@johncallea2575]

Wait, you can use a MAC? The Forescan I bought can only be used with a PC. I have the OBDII. What one are you using specifically? Thank you!

[@lazerbeam3928]

@@johncallea2575 Accord to the Amazon web page, the Forscan app only works on Windows and may or may not work with MS Surface laptops.

[@ianvissers750]

Great video, I hate the double honk as well. I didn't realize FORScan was so easy to use.

[@BuckleUpButtercupTV]

Thankfully, it is!

[@etmccaus]

Timely post! I'd bought one of the switchable connectors a while back in anticipation for Bronco, but read today that '21 F-150s were strongly advised to use a newer unit that switches between busses on its own. Didn't know if Bronco would fall into that camp as well or not...

[@BuckleUpButtercupTV]

Glad it helped!

[@Lethal_Venom]

I'll definitely be getting Forscan for my Bronco when I get it. Such a cool thing to have especially once its figured out with more options you can do with the bronco's. Also heard about being able to unlcok other goat modes as well for some models that may not come with sport mode.

[@BuckleUpButtercupTV]

There is so much you can do with it, it’s nice to be able to change things if needed.

[@richardhiatt9749]

Great Video. Answers lots of questions about FORscan.. THANK YOU BUTTERCUP 🚗

[@BuckleUpButtercupTV]

You’re welcome!

[@hajjdawood]

I started running my bronco on E85. Runs better then premium super smooth acceleration and easier on the clutch got an engine code saying the fuel is outside of its normal limits but otherwise runs perfect. Added bonus that code disables start stop

[@genostylez3]

Great video guys! I had no intention on using this. But seeing how easy it really is, I might just do it for the double honk.

[@BuckleUpButtercupTV]

It really is easy, get rid of double honk lol

[@Yaniv_B]

Great video. After adding crawl mode to model without disconnect sway bar. Is there any problem like check engine lamp or any other alerts??

[@BuckleUpButtercupTV]

I never added goat modes for that reason

[@Clones2011]

cool info and you guys didn't waste any time giving it. subbed

[@BuckleUpButtercupTV]

Thank you, welcome to our community!

[@jeff_bronco]

So that's what Forscan is 😳 At first I thought it was like a STC module. Lots of things you can fix with it, I'm sure 👍 Thanks for teaching me something today!

[@BuckleUpButtercupTV]

You’re very welcome!

[@CbusCars]

Great video! Two things I am certainly going to do when my OBX arrives! Thanks again!

[@BuckleUpButtercupTV]

I hope yours comes in soon!

[@CbusCars]

@@BuckleUpButtercupTV Scheduled to the week of Jan. 17th. Can’t wait! Btw, considering ordering the Gearshade top. Do you prefer it to the Ford Bimini at this point?

[@BuckleUpButtercupTV]

@@CbusCars yes! I do have a promo code for it too. www.pickenspartyof5.com/affiliates

[@CbusCars]

@@BuckleUpButtercupTV Fantastic! Thank you very much!

[@justinmieirs3501]

Thanks, will be picking this up.

[@thirteenthgrade508]

Do you only have to enable/disable? I thought you also had to go into the other settings to change the xxx0 to xxx1

[@mikef9917]

Great video I'm going to get one of these how do I save my factory settings?

[@Mpatient1]

Bookmarking for sometime hopefully this year lol. Here's hoping I don't brick my bronc

[@BuckleUpButtercupTV]

We don’t want you to break it!

[@panzer948]

This is great. I am all about getting Forscan now that they came out with a way to get all the GOAT modes! My Badlands needs that Sport Mode! Yes double honk sucks! Just did it to me an hour ago. You guys were all over this on the same day I seriously considered it. How do you do it!

[@BuckleUpButtercupTV]

We are going to mess with the goat mode one a little bit, it was throwing codes, so once we figure it out we will post a new video. Thanks for watching!

[@fred993a]

You guys are absolutely incredible - thank you so much! Buttercup deserves a great Christmas!

[@BuckleUpButtercupTV]

Thank you, I think she will 😉

[@bec6971]

Hey Pickens Party of 5! I first heard about FORscan from your videos. Thank you so much. I have tried a couple of things and is has left me wanting more. Do you have any tips to find more information such as changing the default GOAT mode, adding info to displays, enabling/disabling features, etc.?

[@CoderMan]

Great info, no more honk! You did something different to the editing or filming, looks very pro!

[@BuckleUpButtercupTV]

It’s the iPhone! I am loving it!

[@BrianRash]

I have that same reader, never had an issue

[@abellemus8660]

Hello! Thank you for your videos. Did 2600 work more accurately for the speedometer for you guys?

[@falconerx]

Great Video! I have been trying to get RID on my double honk for about 1 year. I am going to try the Forscan. I did the Auto Stop Start eliminator it works great. It simply remembers where you left it so you can have auto stop start working or disabled. You will love it

[@BuckleUpButtercupTV]

Check out my video about the Flashcal before doing Forscan, it’s much more user friendly!

[@glamosaurus]

Love you guys! I don’t even have my Bronco yet, and you’ve already been a big help. Any clue if the Sasquatch package Bronco will already have the speedometer calibrated for 35s? Or will I need to do that myself?

[@BuckleUpButtercupTV]

If you buy it Sasquatch, it will already be calibrated

[@glamosaurus]

@@BuckleUpButtercupTV Yay!! Thanks!

[@Co1eTrain84]

i'm getting one of these FOR SURE. There are tons of things you can do with them

[@BuckleUpButtercupTV]

Most definitely! We bought an OEM Trailer Brake Controller for our prior truck and unlocked the feature using ForScan. It worked perfectly complete with adding the screens on the dashboard.

[@hughcrunk378]

This is actually a comment for your audio upgrade. I know you said you took your input for the rear from the kicker for the rear because it sounded tinny but did you know that there’s a fire scam setting the change the rear input to fill range?

[@byronclark7732]

Great info to know when I get mine! Thanks Krista and Matt! 😎

[@BuckleUpButtercupTV]

You’re welcome!

[@chriscozart0620]

Very helpful with turning on the fog lamps and turning off the honk...but I couldn't edit my tire size without throwing a DTC error code. Started over many times after resetting the value and resetting the code but couldn't do it without throwing an error. Guess that value will stay stock. 265/70 vs. 285/70, so not that big of a mph difference. Silver lining is my truck will think I'm going slower and register less on the odometer.

[@BuckleUpButtercupTV]

You may need to do a relearn after doing the tire size, i will pin that post for you to refer to.

[@missingtulips]

Hello there, Already got the forscan. So do i did to download some app or juat plug and play? Thanks!

[@COREELITEFITNESS]

Great vid, do you know if Forscan could be used to disable the front and rear parking sensors as well as the adaptive cc. The reason I ask is because I'm going to install a Ford factory winch. I can modify the mounting plate but I don't really even want the parking sensors adaptive cc anyway. Thanks.

[@BuckleUpButtercupTV]

I am not sure, it has been awhile since I was in there to see.

[@COREELITEFITNESS]

@@BuckleUpButtercupTV Wow, that was quick. Thanks anyway, You guy's are doing a great job! Appreciate all of your hard work for the vids! Maybe I'll see you guy's on the trail sometime.

[@CurtRussell]

Thanks for the video - informative and useful. Question: what does this mod do to the warranty and possible related repairs or work? As I understand it any changes to the computer programs or systems are recorded and Ford (or more likely the dealership) may use that to deny warranty coverage.

[@BuckleUpButtercupTV]

That is a big reason why we stuck to only modifying the Lights, Double Honk, and Tire Size. I do not think any of those would be a cause for a Warranty claim unless they really wanted to deny us but in that case there are probably a dozen other reasons they could find to deny us. ForScan allows for a lot of customization but there are some things that are just not worth it in our opinion.

[@CallMeCribby]

@@BuckleUpButtercupTV I had the same question on this. Really it shouldn't void any warranty as long what was programmed wasn't part of a system or part that failed. Thanks for the information and video!

[@danburke3995]

Great video!! I just did this to my OBX because I also put 35s on there. I got my speedometer to be accurate which is great! However, I now have a service error that says "Check 4x4". Any thoughts as to what might be going on there? Thank you!!

[@BuckleUpButtercupTV]

Have you done a relearn?

[@natec7398]

@@BuckleUpButtercupTV same here. How do you do a relearn? Thanks! 😁

[@bencreske2560]

You can also stop the auto stop/ start by leaving the trailer plug adapter in while you are driving and it fools the system that you are hooked up and it won't shut off.

[@Just_Joe71]

But then you are tricking the computer to thinking you are towing a trailer all the time possibly changing the shift points in the transmission.

[@hajjdawood]

This disables the reverse sensors

[@bobdobalina7058]

Can you extend the remote start time? And how do you get the blinking headlights? Thanks

[@BuckleUpButtercupTV]

The led blinking comes across the camera because of frame rate of the video they aren’t actually blinking. I know Flashcal will do remote start, and I’m sure Forscan does but not totally sure since I haven’t done it through that.

[@jeffblack4092]

Can you unlock the rear speakers with the forscan?

[@nicoleshadley2889]

Hi, I just found your video series and enjoyed the one on module to disable the auto start and stop along with this one. I’m loving my 2022 Outerbanks but don’t like the Bronco asking if I want to continue driving in the mode I was in during my previous drive. I was wondering if you had a way to disable the question and have the bronco just default to the previous drive mode. Similarly to the auto start/stop feature.

[@BuckleUpButtercupTV]

I would love that as well, let me do some research to see what I can find out!

[@junitono1]

Will using this void any warranties on the vehicle?

[@roberthennessey813]

Thank you this was very helpful! Have you tried adjusting the heated steering wheel temp with Forscan?

[@BuckleUpButtercupTV]

No, we do not have the heated steering wheel.

[@FutureShawn0058]

I’m using ForScan to add Sport mode to my Badlands AND disable the double honk. The first time the double honk went off I was dropping food off at my sisters and it absolutely scares the shit out of me and I dropped all of the food out of the Panera bag. What the hell Ford!

[@BuckleUpButtercupTV]

The double honk is startling!

[@hrford8362]

awesome tutorial, great step by step, what changes did you make to your f150?

[@BuckleUpButtercupTV]

Thank you! I believe the F150 we added the trailer brake.

[@BuckleUpButtercupTV]

Yes, we added the OEM trailer brake controller. Forscan was easily able to activate the controls and the dashboard screens. Cool thing was, the plug/harness was already in the F150, just plugged into the back of a coin holder. The complete job took maybe 10 minutes to install and activate.

[@IluvYahweh]

Nowhere in your video does it show us how to get Forscan. I bought the adapter but don’t know how to access Forscan. Can you please help with this?

[@alecnikolich1387]

Does using forscan void my factory warranty

[@mileshiles1287]

Great video I also like having my fog lights on for cornering I think they help.

[@BuckleUpButtercupTV]

Yes! It helps light the area directly in front of the vehicle not just the distance the high beams provide.

[@Desert6G]

I did the auto headlight disable on mine with FORScan. I didn't like that it turned my headlights on auto every time I started the vehicle.

[@BuckleUpButtercupTV]

There are so many things you can do with it, it is a great tool!

[@johncallea2575]

This is great! Thank you! One question. I bought a Forscan to eliminate that horrific double Honk also, but then discovered it only works with a PC, not a Mac computer. Do you know if this is true with the Forescan you bought and maybe i just have an older version. Or maybe it was a non-issue since it appears you guys are using a PC. Thank you! Also I did purchase the separate stop/start eliminator and it works great and a very easy install.

[@BuckleUpButtercupTV]

I am sorry I am not sure about the Mac thing as we have a PC, they may have a Mac version? If not maybe someone will let you borrow their laptop? Thanks for the feedback on the start stop eliminator.

[@jaydangelo5495]

Ive done Forscan through a VM on Mac (VMware Fusion to be exact). I also had a Bluetooth dongle which is another layer to deal with, but it wasn't a problem. If you aren't technically inclined, a Windows laptop maybe easiest and then again, you might not want to be doing Forscan if you aren't.

[@beastmodeoverseer8525]

I don’t own a bronco but can you replicate the same thing you just did on this video on a 2014 Ford focus? I’ve dabbled with FORSCAN once but I was wondering if it’s better to have the vehicle running while editing the features? My worry is having a dead battery with the car off lol

[@BuckleUpButtercupTV]

You have to have the ignition on to make changes. I think this device is compatible with the focus, but I am not 100% sure.

[@abdulrahmanalawadhi859]

Hii Guys 👋 I did change the tyre size and it works fine .. for the AWD relearn it works successfully but when i relearn the PCM it shows service procedure has been interrupted ... any ideas how to fix it ? I have now a DTC about power terrain i think cant clear it 😕

[@Paughco]

I've heard that you might get error codes after you change tire circumference, and you have to get certain modules to "re-learn" the new value. Did you encounter this on your Outer Banks?

[@BuckleUpButtercupTV]

We did not but we do know how to do a relearn, did you run into this problem?

[@hmong530thao8]

It’s work the same on super duty? Please do a video with your super duty I hate double honk too I have 37s on my tremor need to recalibrate speedometer and tires light on when air be low 65 psi and I run with 45f/40rear psi but light on now Thank you

[@BuckleUpButtercupTV]

I believe it does work for the super duty, we have used it on the f150 before.

[@panzer948]

BTW, did you guys get a new camera or something? The image quality looks alot better than earlier ones. Looks like you are using an SLR that can control the depth of field (blurring the background). Very professional looking.

[@BuckleUpButtercupTV]

I can’t believe you can notice! I did upgrade my phone camera. No more android or dslr, I now have the new iPhone 13pro max. I am loving the quality and it makes me happy that you notice the difference!

[@panzer948]

@@BuckleUpButtercupTV Wow, I am very surprised this came from a phone. I seriously thought it was a $1,500 SLR. I have dabbled in photography for years and own a good digital SLR but mostly for still pics. Maybe that is how I picked up on it as soon as I hit play. Its crazy how phone camera tech has progressed. I use to joke about phone cameras but you cant really do that anymore... Nice job!

[@BirdDogOffRoadAdventures]

@@BuckleUpButtercupTV I upgrade to the Pro Max as well. Great camera!

[@andyramz1705]

Does it void the warranty?

[@metal_horses568]

You said you got errors disabling the auto stop start? I watched this video when you first published and again this morning. Any update/change to the not wanting to turn off auto stop/start? I turned the double honk off on my wife's Explorer ST (My Bronco arrives in a few days) and I didn't have the convenient "Enable/disable" prompts in Forscan like you had. I had to modify the actual codes "xxxx xxxx xxxx" with the correct code and position. I downloaded the spreadsheet with all of the codes for all the mods. Long story short, I wonder if changing the actual codes in the module would resolve your errors (If I heard you correctly in the video)

[@BuckleUpButtercupTV]

It tricks the car into thinking it’s wheels are turned, we are not sure how that effects the safety measures of the Bronco so have decided against it.

[@metal_horses568]

@@BuckleUpButtercupTV Thanks for the reply and I share your same concern. So I think I lucked out. With the 7-Speed manual, auto start/stop will only shut off the vehicle when the clutch is disengaged and the vehicle is stopped. With my driving habit, I always keep the clutch pushed in at traffic lights, so it never shuts off.

[@chrissousanh]

Thanks guys. I just did this today to my 21 Bronco OB. I changed all 3, and it worked as you stated, but now I have a "check 4x4" wrench light on and Ford Pass says I have a Powertrain Malfunction/Reduced Power. Any ideas on why it caused that and how to correct it? Thanks again.

[@BuckleUpButtercupTV]

Yes, it’s an easy fix, you have to Go in and do the relearn. Let me get the steps and I will send it to you

[@chrissousanh]

I figured it out. I had to go back in and update the PCM to learn the new tires as well.

[@BuckleUpButtercupTV]

Perfect, i just was getting ready to respond with what to do!

[@rcarlson29]

@@chrissousanh any idea why when I go to PCM Module initialization relearn, it gets an error at 2% saying Service Procedure Interrupted? Won't let me complete the relearn and I have the wrench light after upping the tire size.

[@BuckleUpButtercupTV]

Hmm… I’m not sure, let me research and see if I can figure it out.

[@bollockbuster]

The number of times “forscan” was said, my wife for sure thought I was watching something inappropriate around my daughter 😂. She said go watch that somewhere else

[@BuckleUpButtercupTV]

😂😂😂

[@bradleyjohnson3068]

Another informative video. Thanks again. You guys rock!

[@BuckleUpButtercupTV]

Thank you!

[@MrJruta]

Great info. Thank you 👍

[@BuckleUpButtercupTV]

You’re welcome!

[@Jason_903]

Sorry I might have missed your video on your lift what kind of lift and size to get 35s on your bronco

[@BuckleUpButtercupTV]

We have the 4wp leveling kit currently. The tires are the same size as on the Sasquatch, 315/70r17 and the wheels are 17x9 +30

[@jg-bordfronco2925]

Great vid... are these things that you can request the dealer do before pickup?

[@BuckleUpButtercupTV]

I am not sure if they would?

[@Just_Joe71]

Depends on the dealer

[@timjackson4927]

I forgot, that hack only works on factory tow package, great video by the way. Valuable content!!!!!

[@BuckleUpButtercupTV]

Good point, I believe that Sport Mode also disables auto start stop. I have gotten in the habit of pressing the disable button each drive.

[@deidrepaez5263]

Can you use the forscan for the zone lights on the driver and passenger side mirrors to turn them into signal lights?!

[@BuckleUpButtercupTV]

I am not sure on that, but we are going to see about being able to keep the zone light on while driving

[@scramick]

Thanks for the detailed video! Question, how do you save the original files and how do you upload them if you want to go back to the original settings? Thanks!

[@BuckleUpButtercupTV]

I cannot recall the exact process by memory but will connect it later today and report back with the steps.

[@scramick]

@@BuckleUpButtercupTV Thanks!

[@interiorguys7992]

Is there a way to disable the 45 minute timer that starts in the battery management system that shuts off the electronic brake booster when In tow mode that seems to be a problem for people flat towing the vehicle using a supplementary brake system the 2.7 liter apparently shuts power brakes off leaving the bronco brake less after 45 mins being flat towed behind an rv

[@BuckleUpButtercupTV]

I am not sure about that. When you get in there you can maybe search for it?

[@jaydangelo5495]

Interesting... I went from a 2.3 MY21 to a 2.7 MY22 and was eager to take advantage of the electronic brake booster when flat towing. You would think that it shouldn't get turned off unless battery low condition. Did you find anything else about this or a workaround?

[@AllTerrainNation]

I need to get this!!

[@BuckleUpButtercupTV]

Or wait until January and you can use ours

[@BuckleUpButtercupTV]

There is some much that can be modified it is almost scary. In our last truck we were able to add an OEM trailer brake controller. It worked flawlessly complete with adding the new dashboard monitor screen.

[@REMYSCH]

Good video

[@BuckleUpButtercupTV]

Thank you

[@2011blueman]

Please do a FORScan video on how to add sport mode. I saw that is possible on the bronco6g forum.

[@BuckleUpButtercupTV]

I already have sport mode on my outer banks, the other modes that I could add would cause errors since they engage lockers. I will see what we can do though, maybe I can borrow someone’s badlands.

[@2011blueman]

@@BuckleUpButtercupTV Ok, thanks, I have a badlands supposedly being delivery in the next few days and I'd love to add sports mode to it, but I've never used Forscan before so not sure I would be comfortable enough to do it without seeing the settings in the program.

[@BuckleUpButtercupTV]

@@2011blueman congrats! I will see what we can do

[@2011blueman]

@@BuckleUpButtercupTV I wouldn't congrats anyone until it's in their driveway. It looks like Ford is going to miss the delivery ETA window just like they missed the first 8 build weeks they promised.

[@panzer948]

Hi PP5, any new videos coming out using Forscan soon? Just got my license and software setup. Cable comes tomorrow. I will be doing a few changes over the weekend :)

[@BuckleUpButtercupTV]

Maybe after the weekend, we haven’t had much time to mess with it since this video

[@wilsowp]

Why did you have to go from ms back to hs mid video before modifying the program? I don’t think you explained the reasoning

[@retiredjetmechanic6219]

When taking your vehicles to the Ford dealer for service, is there any issue with them resetting the computer back to original settings? Have heard of people having to go back in after service to change setting after each visit to the dealer. (Foreign OEM)

[@BuckleUpButtercupTV]

I don’t see why they would reset your computers unless that is indeed what you are in service for. Even if they did, it doesn’t take a lot of time to go back in and redo after getting your car back.

[@fretless05]

Great video and good warning on how the FORscan auto start/stop function works. This is a somewhat unrelated question to your build, but FORscan related. I am getting my Bronco with the modular bumper, which eliminates the fog lights. I plan on getting something in there and wonder if you know if the fog light switch is still part of the light switch assembly and just disabled so it can be turned on via FORscan, or do they put in a different assembly on models without fog lights?

[@BuckleUpButtercupTV]

I do not know the answer to that, but I will try to find the answer for you.

[@fretless05]

@@BuckleUpButtercupTV Thank you! You're awesome!

[@metal_horses568]

From what I've read on the forums and seen in the Forscan codes, the wiring is there, you just need to buy a fog light headlight switch assembly and activate it in Forscan

[@dannyp4959]

This was great... I will be nervous messing with the computer. I had the double honk too. Scares the poo out of me almost every time I get my mail. Did you guys get a new camera or mic? Something seems different. Looks better. Maybe I just had too much wine with dinner tho!

[@BuckleUpButtercupTV]

I did upgrade my camera. I went from an android to the new iPhone 13 pro max :)

[@marcus_ohreallyus]

Can this also be used to calibrate a signature headlight? I just installed sig lights on my Big Bend... passenger side works fine because I bought the light with control module intact. For the driver side, I needed to buy a control module but I think it needs some calibration because it doesn't have the crossbar lit up and a couple of other weird things going on. Would Forscan fix that?

[@BuckleUpButtercupTV]

I’m not sure, you could certainly try and see if it gives you the option.

[@marksjunction69]

You guys make this seem so easy, but it is not that easy. I have done the license and the drivers but it is still not working. I have contacted support…..if not going to return.

[@colinlocke1]

Pretty cool. At 2:30ish referring to tire circumference.. you are literally standing in front of the spare. Get a piece of string and then measuring tape... then you know the actual circumference. While most tires are near listed size, the BFG All-Terrain KO2 you're using has actually been reported by owners of some sizes to be a bit undersized. Might as well make it perfect, right? :)

[@BuckleUpButtercupTV]

Great point! We actually keyed in 2,600 mm to start there with dialing it in and it came out perfect. Our speed has been confirmed by Waze and a roadside radar.

[@gunnernanty8836]

Heyy!!! I hope you guys are doing great! When will the next video becoming out? I’ve been on the edge of my chair waiting 😂

[@BuckleUpButtercupTV]

There will be one released tonight!

[@BuckleUpButtercupTV]

Tonight 5pm ET and then another one on Wed at 5!

[@BuckleUpButtercupTV]

It also makes me happy that you are excited to watch!!

[@gunnernanty8836]

@@BuckleUpButtercupTV you guys have a great family channel to watch! You also make great videos about the bronco and your adventures with it. So I appreciate all the things you do for this community! you guys will definitely be popping!

[@desert330]

Would this also be applicable to bronco sport BB?

[@BuckleUpButtercupTV]

I’m not sure about that

[@rydfree]

6:26 Can you elaborate on this issue . I have never heard of the A.S.S. being linked to the tire position in any way whatsoever and can see no indication of this within Forscan .

[@BuckleUpButtercupTV]

My understanding, maybe there is a better ForScan process for this now, but one of the methods to prevent auto start/stop is to fully turn the wheel in one direction and I thought the ForScan method to disable it is to trick the system into thinking the wheels are turned. I was not comfortable with the process and decided not to dig into it any deeper. Instead we just made the habit of pressing the disable button or drive in sport mode. There certainly could be a process that is completely safe.

[@AdrianFontaine]

3:23 “I actually find that “foreskin” has the most modules” 🤣🤣 Sorry, someone had to point it out.

[@gregpeters7281]

Does the forscan require surgical removal?

[@BuckleUpButtercupTV]

😂😂😂

[@Just_Joe71]

Nor recommended as an adult

[@Gdavis135]

Did you add Baja or Rock crawl goat mode?

[@BuckleUpButtercupTV]

No, we are a little weary of adding any goat modes, besides appearing as a option I am not sure we would see a benefit. Most of the goat modes are simply quick ways to lock the lockers and move into either 4H or 4L along with throttle and transmission mapping and possibly sta-bar disconnect. Since we do not have factory lockers I am not sure that we would see a benefit based on our Bronco specs.

[@dylanlam6430]

Just came back from offroading where after I started my car again on the trail the service 4x4 and check engine light came on. This prevented me from shifting from 2H to 4H or 4L. I just restarted the car and it went away and everything worked. I'm sitting here with the scanner and it says the code is with the AWD module and that it exceeded the relearn limit. Anyone got a solution?

[@claybrowne9762]

The link to the cord doesn't work. Can you send me the correct link to the correct cord?

[@BuckleUpButtercupTV]

amzn.to/3orGzRR

[@Winterfell1066]

Why the change from Pickens Party of Five?

[@BuckleUpButtercupTV]

Family Update | Channel Update | Buckle Up Buttercup Announcement kzbin.info/www/bejne/p3ekpomeps5-g9E

[@aaronbecker4372]

I have a 2022. Is that why my only modules are 4 labeled “PCM?”

[@BuckleUpButtercupTV]

I will take a look when we get home tonight. I recall that if I did not have the engine running all of the modules would not appear. Also if I started on MS or HS it would show differently.

[@tonyd2079]

I tried doing this and I keep getting error codes when i'm done. Servce 4x4, service charging system etc... When I load forscan it says my adapter cable isn't the correct one. I have the exact same one as you. I had to undo everything and clear my dtc's to make the error codes go away. I retried several times only to get more error codes.

[@BuckleUpButtercupTV]

There is a relearn process to reset the 4x4 system that may need to be completed.

[@BuckleUpButtercupTV]

I will grab the steps from our screenshots that we took.

[@BuckleUpButtercupTV]

I just went out and what I selected when I received the service 4x4 error was the AWD Module Initialization/relearn from Central Configuration

[@BuckleUpButtercupTV]

A pop up will come up that explains how the relearn corrects any mismatches between Vin, Tire Size and Axle Ratio. I start this with the engine running

[@BuckleUpButtercupTV]

I’m half way through it will have you turn the ignition off then back on without starting the engine and it will complete the relearn. Takes around 30 seconds.

[@rlshultz5841]

Seems the dealer could make these changes easily ?

[@BuckleUpButtercupTV]

I am not sure if they would?

[@VincentGilligan]

I can’t be the only one hearing Foreskin lol

[@BuckleUpButtercupTV]

You’re not 😂

[@timjackson4927]

All you have to do is plug a trailer plug tester( 4 wire) and leave it. Start stop disabled!!

[@BirdDogOffRoadAdventures]

Well, that would be an easy and cheap fix. Thanks for sharing!

[@BuckleUpButtercupTV]

I will look into that, thanks

[@markcooper110]

So we have the 2021 Big Bend. Change the tires to 35x12.5x17. So speedometer was off. Followed the video and everything was going okay, then received a few errors. Tried to restore from back up and and it says my file is not valid. That is a first. I have been using Forscan on my F350 for several years now. Now when I go back the body control module and hit run the screen doesn't look like anything was before. So I am not sure if everything is good or not. I was able to do the relearn and clear the codes. But I am not 100% sure if everything is okay. If I were able to get a back up from someone else that has the Big Bend edition would a back up of that one and be able to restore to mine? Thanks, Mark

[@BuckleUpButtercupTV]

Let me see if I can find the website with the factory “As Build” specific for the vehicle’ a VIN. We had to redo this process since the video was posted and the second time we also had errors populate. We were able to clear them by completing the relearns.

[@markcooper110]

Thank you. You need the VIN or I will need it to get the as built once you find the website.

[@danielroman3708]

Did you use Forscan to clear the codes? Have similar problem with my.

[@dustinbienvenu2404]

I have errors after changing my tire size also. I read to do a relearn but I’m new to forscan and not sure if I did the relearn correctly. Errors in PCM, ABS and AWD.

[@HaveBroncoWillTravel]

Will this work with my Mac laptop

[@BuckleUpButtercupTV]

We are not completely sure, we are getting ready to purchase our first MacBook. It looks possible from a quick search.

[@okdock8702]

My mother had the doctor remove my FORscan shortly after I was born

[@BuckleUpButtercupTV]

☺️

[@cynicsupreme]

I’ve heard you can now for 2022 get an auto stop delete. Saves about 6 microchips.

[@BuckleUpButtercupTV]

Interesting

[@RodGwinn]

Can you do seatbelt alarm too?

[@BuckleUpButtercupTV]

Yes, that is another simple chime to disable.

[@RodGwinn]

@@BuckleUpButtercupTV nice to turn that off, when I’m driving slow, off road, or on property,