I can confirm that IGR (In Game Reset) works better with the Brook XB2 on soft modded consoles. Mine was working almost perfectly until I TSOP flashed my 1.4 with EvoX m8+ and now when I do an IGR to return the dash my Series X controller has a solid light but the Brook is flashing and not connected. However rather than remove the batteries you can just hold down the home button for 10 seconds to force turn it off. It then reconnects when you push the home again.
@HellTantrumbull9 ай бұрын
For controllers made for Xbox One/Series, I suggest if you're using a wireless controller to plug it into the Brook with a usb cable instead of just relying on the wireless bluetooth part to help with keeping them connected especially if Brook didn't fix the disconnecting problem yet.
@DolceArdore3 ай бұрын
Had to return this because with the firmware it shipped with as well as the latest firmware, it kept randomly disconnecting from all the BT controllers I tried with it (XBox Series, XBox One, Dual Sense, 8BitDo). Apparently an earlier firmware was much more dependable but it’s no longer available. Better off sticking with my Logitech OG XBox wireless controller… feels spongy but has never lost connection.
@MichaelM28 Жыл бұрын
That paperclip reset step on the PS5 controller is completely optional
@el-rocco-locco9118 ай бұрын
I found this around over 2 Years out. But its nice, that you made a Video😉. How it Looks Like Inputlag?
@rightspritegaming8 ай бұрын
Thanks , I don't notice any input lag personally but I do notice connection drop out here and there , making me reconnect the controller
@mihailviloev86626 күн бұрын
SUPER IMPORTANT NOTE THAT YOU SHOULD PIN: in latest firmware Brook fixed "squarish" sticks behaviour, to have a normal sticks behaviour you should press "back + start + b" (and according buttons on dualshock or dualsense). After this your deadzones and sensetivity will be perfect as it should.
@_SYDGAMING_ Жыл бұрын
Im totally getting this wow especially for less than 50 euro what a bargain. How many controllers can you have connected to the dongle say if i wanted 2 xbox controllers on ps3 will i need 2 dongle's
@fidelgonzalez78189 ай бұрын
I tried using a PS5 controller on Capcom versus SNK2 and the Street fighter collection and nothing worked
@halometroid10 күн бұрын
Hey xD! I have the same controller you have at 4:20! Best halo controller :')
@davieslm7 ай бұрын
I have a hard modded Crystal with Aladdin XT Plus2 chip and if the Brook is already plugged in to the game controller port before powering on then it boots into the Xblast OS menu. I must first boot into my modded UnleashX dashboard, then connect the Brook. It is like the modchip thinks the Eject button is being pressed when in Standby. I have not troubleshooted or updated the Brook firmware yet.
@rightspritegaming7 ай бұрын
That sounds like a unique case , it's always better update and forward problem to brook themselves.
@davieslm7 ай бұрын
@@rightspritegaming Just discovered that it does this also with a USB flash drive connected so its not Brook specific. I think I will reflash with a later EvoX M8+ bios.
@davieslm7 ай бұрын
Tested the Brook on my two revision 1.4 Softmodded Xbox’s and the Brook works very well: 1. Brook is recognised when powering on from Standby 2. It still functions when performing an IGR (In-game reset). It is XBlast OS that is causing the conflict with the Brook /flash drives. Also on Etsy there are some Xbox mod sellers that are selling controller port to USB female adapters that just plug into the port and do not have a long wire. Not only do they look neater but there are reports that they eliminate any disconnects. Have not verified this personally though. They cost only £5 each but £20 shipping from US.
@thebrian7channel474 Жыл бұрын
can u use wired controllers or do they have to be wireless i wanted to get the new xbox one duke controller and plug it in the wingman usb on the og xbox
@gs2k12mАй бұрын
On my Xbox Series X XB2 the message "Unauthorized device detected and will be blocked on 12.07.2024" appears
@olmhephaistos25614 ай бұрын
Hi ! i don't understand in your vidéo, why you update the key with xbox one firmware to use with an OG xbox ? and on the brook's download page, nothing about OG xbox update ... curious ?
@oldschoozgamer4 ай бұрын
my xbox series x/s controller keeps disconecting when im playing on xbox360 with the lastest fw on the brook devive playing wireless
@blinkyblinkycomputerband3 ай бұрын
I use an unmodded XBOX and wonder, how to use the memory card with the sick! Any ideas? Thank you!
@rightspritegaming2 ай бұрын
Yeah not memory card feature built in , a great point though t I use the the internal storage
@Dan-gw3cu11 ай бұрын
How many controllers at the same time?
@freeziekat9 ай бұрын
This would be great info to have
@MichaelM288 ай бұрын
1 adaptor per controller
@FOOG7211 ай бұрын
I need ur help do u know if a non wired Xbox 360 controller plugged with a wire works
@rightspritegaming11 ай бұрын
Ogxbox360 adapter plugs straight in to the main board I did a video on that aswell
@FOOG7211 ай бұрын
So it’s the works the same as a normal wired Xbox controller
@KickDrumKid237 ай бұрын
Can you use this on a XB360?
@FOOG727 ай бұрын
@@KickDrumKid23 I bought it and yes you could use it on Xbox 360
@MrBryanfranc15 ай бұрын
Can the armor x pro be connected to the xbox using this method
@Monk_Z Жыл бұрын
Hey can I do the firmware Update with a Laptop? Im assuming I can
@MichaelM28 Жыл бұрын
Yes you can
@ARCADER_RAPPER11 ай бұрын
Arcade stick?
@rightspritegaming11 ай бұрын
I have tried a 360 arcade stick and that works great , your best checking out compatible list direct on Thier site
@Lcs_Sem_Fronteiras11 ай бұрын
Will this brook adapter work on the Nintendo Wii?
@rightspritegaming11 ай бұрын
This one won't unfortunately
@opsgaming7792 ай бұрын
What if you wanted to use 4 players do u need 1 for each port?
@rightspritegamingАй бұрын
Yes unfortunately
@opsgaming779Ай бұрын
@@rightspritegaming can just the USB to Xbox wire be use to just plug a USB arcade fighter stick into it without the XB2? Im trying to make a arcade with my xbox but need away to hook 4 arcade sticks to it lol
@rightspritegamingАй бұрын
@@opsgaming779 sounds like a great project, all the best with it.
@justsayin463217 күн бұрын
@@opsgaming779If you’re still wondering, the answer is yes. But you’d need a cheap OG Xbox-to-USB adapter cable for each port.