Looks nice, cant wait for someone to damage my rear bumper so I can order one.
@BrosFOURRSpeed4 жыл бұрын
Haha yeah I have definitely loved this so far! Looks like it could've been factory!
@SORENEAGLE4 жыл бұрын
Looks like you're using a diamond cutting wheel and instead of a regular cutoff wheel. Diamond wheels are more for tile and other ceramic or stone applications. Bumper looks good!
@greglautz84702 жыл бұрын
I'm watching this video on my TV and that's exactly what I was going to say for comment
@theARMORYchannel4 жыл бұрын
I’ll tell you what you guys got my respect you tackle everything.
@BrosFOURRSpeed4 жыл бұрын
Thanks! It was intimidating but just taking it step by step made it a lot easier to do, not a crazy amount of work looking back!
@Caedda4783 жыл бұрын
I'm currently buying my first Taco and you guys inspire me with ideas. Awesome truck!!
@BrosFOURRSpeed3 жыл бұрын
That is awesome! Congrats! You will definitely enjoy the Tacoma! So much to do and so many different directions for the build!
@66skate4 жыл бұрын
Nice job cutting and fitting. I'm surprised you didn't heat shrink all of those wires though. Tape will eventually start holding moisture.
@BrosFOURRSpeed4 жыл бұрын
I had all the tubes ready to go, but from soldering it made it bigger than the tubes I had, otherwise I would have.
@rodneyb9474 жыл бұрын
Your bumper really looks great and the added 4 inch clearance is really helpful for rock climbing and all your off-road fun.👌
@BrosFOURRSpeed4 жыл бұрын
I'll be filming a video on it offroad here soon! Can't wait to share how much better it is!!
@kylestansell96794 жыл бұрын
Impressive install. I'd never be confident enough to make those cuts. Final product is awesome!
@BrosFOURRSpeed4 жыл бұрын
Yea it was a little intimidating, but not bad after seeing how it looks!
@kylestansell96794 жыл бұрын
Absolutely agree, it turned out perfectly.
@cwc2944 жыл бұрын
I had no idea David Spade drove a Tacoma. Very cool.
@guy37492 жыл бұрын
Nice job, I bet you feel much better now and it was worth the money and time. Thanks for sharing.
@BrosFOURRSpeed2 жыл бұрын
This has been one of the best mods I could have done!! I have no clearance issues offroad so it's so much more capable now!
@ALWAYSPDG4 жыл бұрын
Looks good, nice job boys!
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@2291adrian4 жыл бұрын
Very nice job on the cutting! Love these install videos. Keep them coming!
@BrosFOURRSpeed4 жыл бұрын
Thanks!! I'm just glad it was a level cut!
@Tourbillion143 жыл бұрын
Use heat shrink tubing next time for a better and moisture proofing the wire harness.
@BrosFOURRSpeed3 жыл бұрын
Can you time stamp where you saw that? I used heat shrink tubes on the wires for the hitch connection..
@Mr.SeymourButts2 жыл бұрын
Bros four speed.... you do know we drive tacoma's right? 😆 😂 😆 😂 😆
@BrosFOURRSpeed2 жыл бұрын
Lol that’s cool you have one! I love the Tacomas!
@praiselordcthulhu24284 жыл бұрын
Just finished the pick up for the bumper video. And boom the install just got uploaded. Great video. I really appreciate how you show how and teach a bit on each mod install.
@BrosFOURRSpeed4 жыл бұрын
Glad you liked it!!
@praiselordcthulhu24284 жыл бұрын
@@BrosFOURRSpeed yeah i decided a while back i want a tacoma. Test drove a trd offroad last week and loved it. So until i get it im making a list of mods i want lol. And i love your videos showing how to do some of them. Other mods id like to do is upgrade sound system i love good bass. And to chip it for performance. If your thinking about it id love a video as im not good with electronics lol.
@BrosFOURRSpeed4 жыл бұрын
@@praiselordcthulhu2428 There's definitely a lot you can do with it, not sure if I'll be changing that electronics but we'll see!
@SpencerHogg4 жыл бұрын
full send on the rear bumper, sick!!!
@BrosFOURRSpeed4 жыл бұрын
Haha yeah!!
@othoapproto9603 Жыл бұрын
good job, dad. Thanks for the well done video. BTW cut-off disc are better for sheet metal.
@BrosFOURRSpeed Жыл бұрын
Glad you enjoyed the video, I didn’t have any issues with the one I used. Seemed fine to me.
@ericn.26774 жыл бұрын
looks fantastic! Matches all the body lines real nice
@BrosFOURRSpeed4 жыл бұрын
That's the main reason I went with this one!
@alshackleford79063 жыл бұрын
Flux the wires before you solder. It’ll let the solder flow into the connection and you’ll have a much stronger and dependable joint. 👍🏻
@BrosFOURRSpeed3 жыл бұрын
Thanks for the tip, I've done it multiple times this way and it seems to do fine!
@alshackleford79063 жыл бұрын
@@BrosFOURRSpeed you’re rolling the dice, but ok. The sharp edges and random strands will work their way through the heat shrink and tape eventually. If it came from the factory like that you’d be upset. Do it the right way or not, it’s your truck.
@BrosFOURRSpeed3 жыл бұрын
@@alshackleford7906 They won't come apart the way it is.
@alshackleford79063 жыл бұрын
@@BrosFOURRSpeed you half assed your solder job and that’s obvious. If that’s the way you want to do it then do it, just stop trying to justify cutting corners when it’s so easy to do it right.
@BrosFOURRSpeed3 жыл бұрын
@@alshackleford7906 Honestly it's connected fine man, I don't see anything wrong with it, it works and not much more you can do. I'm sure it's not 100% off the text book, but that's what I did. I actually did flux the wires, but it's unnecessary in most applications.
@IvoryOut4 жыл бұрын
Awesome bro, the effort in the measurements paid off! That looks so good
@BrosFOURRSpeed4 жыл бұрын
Thanks a ton! It's been the best mod I've done so far!
@sunnmic4 жыл бұрын
That’s about 4” added clearance... nice
@BrosFOURRSpeed4 жыл бұрын
Oh yeah! It'll be great for adventures!
@seanrwaterloo4 жыл бұрын
Nice job, looks good!!
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@seanrwaterloo4 жыл бұрын
@@BrosFOURRSpeed you're welcome 🤜🏻🤛🏻
@fringelunatic4 жыл бұрын
Lots of vids on Tacoma upgrades. Downside is adding lots of extra weight reducing mpg and slowing it down. Not to mention adding massive tires that's not recommended by Toyota. Then people complain(not you) that Tacoma is under powered. My mostly stock SR v6 is plenty fast. I've taken it over several mountain passes to go skiing and some off roading and never felt it was under powered. Use it for what it was intended and it has plenty of power. Don't get me wrong I did add A/T tires. Tires that are recommended size and some minor aesthetic trim pieces. When adding larger tires it effects power because the rear gearing won't match the tire size.
@BrosFOURRSpeed4 жыл бұрын
That's all true, but I don't really care about the mpg as much and I haven't noticed it being underpowered with the larger tires so I don't know why people complain about that. I don't use this as a sportscar so I don't notice lack of power! I might be going up another size this year, but looking to regear the truck and see how that helps!
@juanvillagomez90193 жыл бұрын
I have a basic sr that someone backed into in a parking lot now I'm looking into my options for a fix
@BrosFOURRSpeed3 жыл бұрын
Oh wow! Sorry to hear that! There are plenty of steel bumper options if you don't want the high clearance route! I've seen some for around $400-600 if you want something basic!
@johnredden87282 жыл бұрын
So I would in the future try and cut the plug back a little bit so just in case you ever need to use that as a repair pigtail. Also might want to upgrade your head shrink or get you a heat gun to try and help seal that heat shrink better. The way it looked that is a good place for water to get in and rust your connection up. As much as I like the bumper I don't think I could ever cut my truck up.
@BrosFOURRSpeed2 жыл бұрын
I'm not sure what you mean by using it as a repair pigtail, it's been fine and functional since I've installed it! It's been the best mod and great for offroading!
@johnredden87282 жыл бұрын
@@BrosFOURRSpeed the plug you cut off of the tag light plug where you wired up the new lights. Cutting it right at the plug makes it to where it can't be used again. I do love the look, but you have more courage than I do to cut my truck With the RH side damage I can see why. You are where I got my exhaust idea for my 2017 Trd Tacoma from.
@BrosFOURRSpeed2 жыл бұрын
@@johnredden8728 I use the plug all the time, it’s completely functional! Just needed to extend it to fit the new bumper location! But yeah it was a big project and happy with it! And that’s awesome to hear! I’ve had a few exhausts but it always nice to see videos on that helping others!
@jgt4164 жыл бұрын
Amazing job guys! Looks professionally done👍🍺
@BrosFOURRSpeed4 жыл бұрын
Thanks 👍
@timsmethurst35082 жыл бұрын
For measuring use a board that is long enough to span the bed and overhang by 6 inches on side , and attach a 20 inch board.
@BrosFOURRSpeed2 жыл бұрын
That's pretty much what we did. Came out perfect as shown in the vid ;)
@kevenelledge72804 жыл бұрын
Looks great. One of my favorite high clearance bumpers for the Tacoma. Im looking for one myself now. Just wish the lead times weren't so long.
@BrosFOURRSpeed4 жыл бұрын
Yea that's the biggest thing about products like this but well worth it!
@davidtringale45474 жыл бұрын
Good thing u r working on the Takoma. When the Vette comes in I think the truck might be neglected
@BrosFOURRSpeed4 жыл бұрын
Haha possibly!
@ericw50324 жыл бұрын
Nice work, gents. 👍
@BrosFOURRSpeed4 жыл бұрын
Thanks! 👍
@berzie2 жыл бұрын
Looks nice. Good Job
@BrosFOURRSpeed2 жыл бұрын
Thanks! Working on a brand new front bumper now! This was a cool project!
@grn92094 жыл бұрын
Great job👊🏼
@BrosFOURRSpeed4 жыл бұрын
Thanks! What kind of truck is in your profile pic!?
@dakotahamilton22274 жыл бұрын
That bumper definitely gives that truck a much better look, if I ever do this to my truck I will call you guys 🤣 you guys are like pros at this
@BrosFOURRSpeed4 жыл бұрын
Dakota Hamilton haha. It’s an awesome look!
@BigPuffyNipples3 жыл бұрын
At the beginning I was thinking this would be the bumper I get for mine but then I got to the cutting part haha. Looks super clean tho
@BrosFOURRSpeed3 жыл бұрын
Haha yeah! There was no going back after that! But I love it! The best bumper I could have put on the truck and I have no issues offroad with it! Definitely worth it if you hit the trails a lot!
@tex243 жыл бұрын
That looks great!
@BrosFOURRSpeed3 жыл бұрын
Thanks! It was definitely a big project, but I love how it turned out! Makes offroading easier lol!
@JOSEGARCIA-vl4pk3 жыл бұрын
I been trying to replace my stock bumper but I need the hitch you doing a beautiful job congrats 👏
@BrosFOURRSpeed3 жыл бұрын
Thanks 👍 I have seen a lot of regular bumpers with hitches, but if you want more clearance, this is a great one to get!
@look92vean983 жыл бұрын
If you want a high clearance bumper with a hitch you could get CBI's bumper they hide the hitch behind the license plate
@BrosFOURRSpeed3 жыл бұрын
@@look92vean98 I saw that as an option too, either one, they are both great!
@justingarnick60214 жыл бұрын
Dude I’m such a fan. Look forward to ur videos more then most. Keep it up. Would love a blue vinyl patch for my truck. Just a suggestion. Make it happen lol
@BrosFOURRSpeed4 жыл бұрын
What would be the blue vinyl patch?
@justingarnick60214 жыл бұрын
Bros FOURR Speed idk like a blue Tacoma shaped patch. I know a lot of guys that put patches all over their trucks headliner. Would be cool.
@BrosFOURRSpeed4 жыл бұрын
@@justingarnick6021 That would actually be pretty cool!
@devildoc67496 ай бұрын
It's been a while, looking back at 2021, appreciate your different builds. what is new over on the East Coast?
@BrosFOURRSpeed6 ай бұрын
Glad you enjoyed the videos! 2024 Tacoma is the next project to work on later this year!
@jacobmannn84004 жыл бұрын
Yeah man that looks solid
@BrosFOURRSpeed4 жыл бұрын
Appreciate that!
@moneerissa65053 жыл бұрын
It looks spectacular.. Good work brother.. Is there anyway you can tell me what is the part number of the black plastic piece located under the taillight that has never been taped..thank you
@BrosFOURRSpeed3 жыл бұрын
I tried looking it up and I'm not sure what it's called to be honest! Maybe your local Toyota dealer can give you a number on that and then you can look that up to get it for less!
@ryansurrell89044 жыл бұрын
Very well done video, looks great on the truck!
@BrosFOURRSpeed4 жыл бұрын
Appreciate that! Can't wait to test it offroad! It's already make a huge difference!
@erikanderson5424 жыл бұрын
Great job on the bumper! I really like the vinyl decals too! Gives it that Raptor look
@BrosFOURRSpeed4 жыл бұрын
Thanks! That wasn't too bad of a project especially comparing it to this one!
@BDevi0us4 жыл бұрын
Man I wish I had the balls and confidence to do this to my 19 Tacoma trdpro voodoo blue! Great job looks awesome and done right!👍
@BrosFOURRSpeed4 жыл бұрын
Haha thanks, it was intimidating, but after doing it, I'd do it again!
@steelmill29284 жыл бұрын
Nice work,have to check out that bumper looks so much better than the stock one
@BrosFOURRSpeed4 жыл бұрын
Thanks 👍 I've been really happy with this bumper setup!
@zr2dad53 жыл бұрын
good job. i have to do my 2021 zr2 now.
@BrosFOURRSpeed3 жыл бұрын
Best mod I have ever done on a truck!! I love the function and the look! I have so much clearance now on the trails!
@johngray9702 Жыл бұрын
Thank you for sharing.
@BrosFOURRSpeed Жыл бұрын
It was the best bumper to install in my opinion!
@clos23784 жыл бұрын
Tons of props for doing it yourself! Looks good!
@BrosFOURRSpeed4 жыл бұрын
Thanks! It was a fun project!
@Mcduggies4 жыл бұрын
Great vid but please ya have to work on your wiring skills and really weather proving those connections. That heat shrink and tape isn’t gonna cut it. Ya truck might get automotive gangrene its not fun. Especially in humid climates. My advice is use high end heat shrink with the adhesive inside and maybe even some split loom for protection against rubbing...nice truck man 👍
@BrosFOURRSpeed4 жыл бұрын
Thanks for the comment, I've used these heat shrink tubes on other projects and it's worked just fine!
@darriontunstall37084 жыл бұрын
Great video!!! Looks good! Is that y’all friend? Helping y’all out
@Oliver-pl5sk4 жыл бұрын
Maybe go back and try the same river crossing where you dinged your truck earlier and see how it clears that big drop now? Will be a nice reference!
@BrosFOURRSpeed4 жыл бұрын
I want to! But that area has got very sketchy since then lol
@thedetective81503 жыл бұрын
Great job guys!
@BrosFOURRSpeed3 жыл бұрын
Thanks! This was a cool project for the Tacoma and I've loved having this bumper! It's been great for offroading!
@jeffwithglasses69762 жыл бұрын
toyota financial is gonna be tight after seeing this one 😂
@BrosFOURRSpeed2 жыл бұрын
lol how so? I own the truck outright ;)
@johnf6794 жыл бұрын
Looks great! Mine should be here in a few weeks. Can't wait!
@BrosFOURRSpeed4 жыл бұрын
Oh nice!!
@dannyeugenewaits94863 жыл бұрын
I take it that your taco doesn't have the Blind spot monitor system and backup sensors... Dang.... I'm getting ready to upgrade my 2017 with aftermarket replacement bumpers and was curious on the removal of those monitors and any code issues... I'll find out soon enough!
@BrosFOURRSpeed3 жыл бұрын
The blind spot wasn't available on 2017's and I didn't get the tech package to have the sensors. Didn't need or want them. They make this bumper to accommodate the backup sensors! It will have cutouts for you to install them into this one! The blind spot is integrated into the tail light I believe or side mirrors so that shouldn't be an issue.
@RedWingsninetyone4 жыл бұрын
Nice job! Also, by just going down you were inadvertently using the file correctly. They only cut in one direction anyway.
@BrosFOURRSpeed4 жыл бұрын
Haha true, glad it worked out!!
@markknox56334 жыл бұрын
Outstanding job! I'm always amazed at how you guys can do just about everything with your vehicles right in your own driveway and it always turns out great. I would have accidentally sawed through a tire and made a complete disaster out of the project.
@BrosFOURRSpeed4 жыл бұрын
Haha, It's nice that we've been working on the vehicles a long time to adapt to a new project like this, it was nerve racking some what cutting but glad it came out nice!
@jaimepena67674 жыл бұрын
great jobs fellas
@BrosFOURRSpeed4 жыл бұрын
Appreciate it!
@mmunoz58754 жыл бұрын
Love the new bumper!!! It looks a whole lot better than before!👍
@BrosFOURRSpeed4 жыл бұрын
Thanks! I was ready to fix that dent and this was the cheaper solution so that works with me!
@sanjuanpr254 жыл бұрын
Looks awesome!
@TheTacticalHippy8 ай бұрын
enjoyed the video thanks
@BrosFOURRSpeed8 ай бұрын
Glad you enjoyed it!
@pcarobsessed97784 жыл бұрын
Your father should proud of you bros!
@joseyanes66954 жыл бұрын
Sweet looking bumper. I am new to your channel and I have learned a ton. Plus it's also a great way to spend your social distancing. Keep up the great videos.
@BrosFOURRSpeed4 жыл бұрын
Thanks for checking out the channel! And yeah great project for sure!
@soulsurfer87974 жыл бұрын
One thing to consider is the weight you are adding is rear of the axle which is why people only recommend you minimize the weight of objects in your rear. Lol. Also, remember the next mods you will do are adding a dual tire swing out as that will house your tire and possible Jerry cans. As doing a high clearance bumper and keeping the tire underneath is kids pointless. Nice vid and strong work.
@BrosFOURRSpeed4 жыл бұрын
I do have upgraded add a leafs which help with the weight, but I only added about 70lbs which is really insignificant I think. For the spare I'm just going to keep it, I don't plan on buying a true full size because to me that's a waste of money, so if I have to use this one, I'll have it! This was definitely a fun project though! Thanks for watching!
@Hashimcooky284 жыл бұрын
Looks really dope how it cuts in like that, perfect fit for sure.
@BrosFOURRSpeed4 жыл бұрын
Oh yeah!
@nathanpatrick70944 жыл бұрын
Look good think of get one then get one for front high clear bumper so can go over some rock without hit also can fit big tire under it
@BrosFOURRSpeed4 жыл бұрын
haha nice! I'm looking into a front bumper too at some point.
@jdmartinezrmz1113 жыл бұрын
Good freakn job
@BrosFOURRSpeed3 жыл бұрын
Thank you! One of the those projects to not screw up on lol! But don't regret this bumper, the coolest thing I've added to the Tacoma so far!
@ToddCMenard2 жыл бұрын
I watch many builds on video and this video tops the list for rear bumper installs... nice job, excellent detail, and thank you. Would you please share the video editing software you use to produce this? Thanks
@BrosFOURRSpeed2 жыл бұрын
I appreciate that!! The coolest mod I have installed for sure! And I use iMovie!
@ToddCMenard2 жыл бұрын
@@BrosFOURRSpeed Thanks for sharing the editor. I have apple so I will download it. Thanks so much!
@2gd5324 жыл бұрын
Try using an actual metal cut off wheel not a literal one lol that blade is for cutting concrete and brick
@BrosFOURRSpeed3 жыл бұрын
This is all I had to use. So I made it work with what I had
@ohios274 жыл бұрын
Relentless makes some awesome stuff. Great choice 👌
@BrosFOURRSpeed4 жыл бұрын
Oh yeah, for sure!!
@71tattooguy4 жыл бұрын
Nice job bro’s
@BrosFOURRSpeed4 жыл бұрын
Appreciate it!
@Big_E914 жыл бұрын
Looks so much cleaner it looks really good 👍🏾
@BrosFOURRSpeed4 жыл бұрын
Thank you!
@cade74584 жыл бұрын
So I convinced my dad to buy a 2020 off-road and for some reason he missed his g37 too much so he gave the Tacoma to me😂 There is so many mods I want to do to it but I’m going to have to wait until I’m out of college and have a career because these Tacoma mods are really expensive . Definitely want to do this bumper at some point. Thanks for making another great tutorial vid!
@BrosFOURRSpeed4 жыл бұрын
Glad you like it! Definitely plenty of mods for the Tacoma! I started small and worked up to these ones!
@jaucovffney4 жыл бұрын
great video! thanks for making it. my only critique is your solder job. did you use flux?
@BrosFOURRSpeed4 жыл бұрын
Yea we did! The rod that you saw was it.
@thatguy-uw5oi4 жыл бұрын
Very nice and very clean. I'm was surprised to see how well the cuts cleaned up with the cutting weel of choice, because that looked like a concrete cutting weel and not a actual cut off weel which would have left a thinner and cleaner cut! But overall all I love the look and the video.
@BrosFOURRSpeed4 жыл бұрын
You have a good eye, of the wheels I had this seemed like the best one to use!
@jaimerivera24144 жыл бұрын
Like everyone else said: great cojones on that mod!!. I was so scared watching you cut without the cover...safety first!!🙈. Great looking truck.
@BrosFOURRSpeed4 жыл бұрын
lol, yeah it took some time to build up to doing this mod. Came out great!! Flawless fitment!
@BrooksyTech4 жыл бұрын
Nice video! And good on you guys for actually soldering!
@BrosFOURRSpeed4 жыл бұрын
I wanted to do this right since I tow every now and then, I didn't want that acting up on me! So far so good!
@Voltechs4 жыл бұрын
You need to link this vid from the one where you busted your stock bumper on a trail.
@BrosFOURRSpeed4 жыл бұрын
I do have that as the end screen, but forgot to put it in the description!
@EvsPapa Жыл бұрын
How'd you address the exhaust being so low as to fit under the original bumper versus the new?
@BrosFOURRSpeed Жыл бұрын
I have a high clearance exhaust ;)
@makamakalena34644 жыл бұрын
You guys did an Awesome Job!!
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@OFFTHEGRIND4 жыл бұрын
Damn that look really good. Really thinking about that for my Tacoma now
@BrosFOURRSpeed4 жыл бұрын
Haha yea! I love how it turned out!
@tigergreg84 жыл бұрын
You guys do such nice work. You make it seem so easy ,but we don't see all the added work. Haha. Honestly, that added weight distribution will be nice. I think you will notice it handles and feels better with the weight in the back, because it won't be so light and feel like it's swinging around, esp on windy days. This was fun to watch. 👍
@BrosFOURRSpeed4 жыл бұрын
Thanks 👍 I think I have noticed it not being as bouncy in the rear which is nice.
@user-cl2es9iu1j4 жыл бұрын
Looks great!
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@jonahkaiguam4 жыл бұрын
Damn guys freaken awesome awesome job on the installation of the high clearance rear bumper. It actually looks like it was purchased with that bumper already installed by the dealership
@BrosFOURRSpeed4 жыл бұрын
Thanks! I love how it turned out! Can't wait to hit the trails and test it out!
@johnrodriguez7014 жыл бұрын
Looks amazing. Great job guys. Hope you are well in these crazy times. God bless you both and thank you for the great content.
@BrosFOURRSpeed4 жыл бұрын
Glad you enjoyed it! And stay well also!
@johnrodriguez7014 жыл бұрын
Bros FOURR Speed i sure did. Thank you.
@kevinkilroy5844 жыл бұрын
Great video. I am waiting on my Relentless bumper with the tire swing out carrier to arrive in OCT. . Ordered the bumper and swing back in July. Course my measurements will be different as I am installing it on a 2011 TX Pro Edition. Your install video will help me get mine installed. Thanks for making the video. \m/
@BrosFOURRSpeed4 жыл бұрын
Just make sure to measure measure measure lol, I spent a good amount of time on that and glad I did because it came out perfect! Good luck with the install, it's a fun project!
@ryanhay55673 жыл бұрын
I ordered mine back in May and just got it last week, but you never know
@ernestobarajas54504 жыл бұрын
Que buen video ii trabajo isieron 👏👏👏👏👏
@BrosFOURRSpeed4 жыл бұрын
Gracias!
@zasvig3 жыл бұрын
So my question is can the hitch be reinstalled? I still need to be able to tow.
@BrosFOURRSpeed3 жыл бұрын
The new bumper came with a hitch! I've used it and towed around 4500 pounds with it!
@asanthadharmaratne22243 жыл бұрын
When you open the tailgate, does it brush against the bumper?
@BrosFOURRSpeed3 жыл бұрын
It doesn't! I was hesitant first time opening it, but even sitting on the tailgate or having my motorcycle in there, doesn't touch!
@oscar902104 жыл бұрын
Great job guys! Unbelievable for a house job seriously!
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@NanceLvr3 ай бұрын
My question... Is they measured 21 inches from the top of the 2x4 or under that 2x4???
@BrosFOURRSpeed3 ай бұрын
It's from the bottom of the piece of wood!
@NanceLvr3 ай бұрын
@@BrosFOURRSpeed thanks!! It was 20 inches I re watched it alot. Have mine now and have to cut this weekend! Awesome how to thank u guys.
@tongtongwang3 жыл бұрын
Where do u put new rear parking sensors?
@BrosFOURRSpeed3 жыл бұрын
I beleive you need to specify when you buy the bumper that you have parking sensors if you have them
@tylerlunz56544 жыл бұрын
Another Great job guys .
@BrosFOURRSpeed4 жыл бұрын
Glad you enjoyed it!
@bviflyboy3 жыл бұрын
It's nice to see the mods, but I love Toyota Trucks so much that it hurts me to see you guys disfigure this truck every chance you get...I have an idea...the next Toyota truck you buy, can you please give it to me before you Mod it?
@BrosFOURRSpeed3 жыл бұрын
I usually like to do mods that keep the stock look of the truck going, but this has been the best mod I've ever done! Also to fix the dent that I put in the side would have cost almost just as much to fix, so figured I didn't want that to happen again! Everyone has mods they like, but yeah the Tacoma is such a great truck!
@lordestrella2314 жыл бұрын
I like the stock better not a big fan of changing things on truck besides little more here and there
@BrosFOURRSpeed4 жыл бұрын
Fair enough, at least I won't dent the bumper anymore though, that's the main reason I did it.
@thivakarsaravanamuthu47444 жыл бұрын
Tacoma looks amazing
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@armandcouture46554 жыл бұрын
Great Job Bros!!
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@JtheInvincible4 жыл бұрын
Great looking bumper
@pauls87484 жыл бұрын
Nice job! Good looking truck! Enjoy!
@BrosFOURRSpeed4 жыл бұрын
Thanks 👍
@Markvlogs03334 жыл бұрын
Cool mod
@MichaelWilliams-qk9rm4 жыл бұрын
Thats awesome guys. Looks great and good work.
@BrosFOURRSpeed4 жыл бұрын
Thanks!
@MichaelWilliams-qk9rm4 жыл бұрын
Bros FOURR Speed Maybe I’ll drive to NC when i get mine so you can help me. 😂
@mrtonydeez4 жыл бұрын
Dang. That looks so clean. Plans for a high clearance front to match? Giveaway the one of there?
@BrosFOURRSpeed4 жыл бұрын
That could be a good plan! I'd like to change up the front maybe soon!