The long awaited video. My personal experience using both printer. No descriptions needed just watch the video. FACEBOOK ‣ / amedion
Пікірлер: 71
@CrisPadilla-el4mm Жыл бұрын
Hey bud, I am GTX tech and happened to come across this video and I just wanted to help out.. I would recommend trimming your waste ink hose, so it is not submerged in the waste ink.. this causes back pressure similar to holding water in a straw with your thumb.. and does not allow the waste ink to flow down from the maintenance station to the waste ink tank; eventually overflowing and dripping into electrical sensors. I would also recommend that you should switch your humidifiers to the Vornado e-vap 40.. The kind you are using in this video will cause your internals to eventually rust.
@mozi19712 жыл бұрын
What an amazing review. I am actually in the middle of deciding between the two and this is the best most unbiased review I have come across. I think I will go with the Epson because my production is low and also the Epson machine is cheaper by almost $5k. I haven't heard enough pros for brother to pay 5k more for the machine. Thanks a lot.
@kienmayin Жыл бұрын
I just thought that your problem is not about GTX, it's about your budget. If you can accept a lot of hidden costs, then buy the Epson. I'm much tired of Epson for this reason.
@TylerLove2 жыл бұрын
Very glad to come across your channel. I am researching and you give so much good information. Thank you
@dobsob082 жыл бұрын
That was a great video. Real world experience, great info, and throw in some comedy as well...Brilliant. I will subscribe, like, and watch again.
@KolorKing Жыл бұрын
This was a great review. I found it very helpful.
@07Review4 ай бұрын
hi friend excellent video, I just wondering how you Make it out with the hidden cost on both nachines, I am looking for the Gtxpro B or the Epson F2200 thanks for your comments
@amedionteo4 ай бұрын
Both totally different machine bro.
@07Review4 ай бұрын
@@amedionteowhich one do you think is more easy to maintain and what is the best in image and design quality, at the end I am looking for the best of this 2, thanks for the information
@amedionteo4 ай бұрын
@07Review i dont get the chance to try F22 yet so cant comment much. I would say color wise Brother has more vibrancy and of course its higher in maintenance cost. Features i prefer Brother. Not sure if F22 have many improvements.
@07Review4 ай бұрын
@@amedionteo ok, thank you brother, keep doing videos, you are very professional and help guys like me new in the business. GOD BLESS YOU GUYS!!!
@kenue61112 ай бұрын
Hi my friend, good videos thanks for share your knowledges. I have questions for you, do you use epson original inks? I want to try use refil cartridges do you recommend or not? the another one question is about if you consider for best results and more easy and fast steps use DTF instead of DTG?
@amedionteo2 ай бұрын
I dont use Epson. Depends on your market and quantity to print. Generally speaking DTF easier to achieve good result. DTG a pain to get it right.
@kenue61112 ай бұрын
@@amedionteo thanks for your message, can you tell me the name of the brand of the cartridge for Epson? the chip works properly? and also I want to know the brand of the inks, thanks in advance for the information.
@amedionteo2 ай бұрын
@@kenue6111 the brand is Epson itself genuine ink. The chip works for sure. ;)
@LavishClub2 жыл бұрын
Thank you so much for this!
@dipimedia_print3 жыл бұрын
Nice review, maybe if you add to compare the price of printer, ink, and printhead it will better. God job
@amedionteo3 жыл бұрын
Thanks for the feedback. Different region different pricing so i dont want to do that cause it mau be confusing.
@dipimedia_print3 жыл бұрын
@@amedionteo of course, but I think its still okay if you compare price in your region
@amedionteo3 жыл бұрын
@@dipimedia_print alright thanks. I'll keep that in mind.
@AlistairOwensgooglePlus3 жыл бұрын
Which has better print quality? Or are they same?
@amedionteo3 жыл бұрын
@@AlistairOwensgooglePlus sharpness the same. Artwork detail depends. Epson can bring out more on yellow side and Brother on other colors. Overall Brother print out more vibrant so it looks more attractive then Epson dull colors.
@emresahinler23568 ай бұрын
Hey, can you please share where do you buy the inks for brother gtx ?
@amedionteo8 ай бұрын
We are authorized dealer.
@munirnazir90103 жыл бұрын
great job bro
@christianbianco20752 жыл бұрын
Estimado buenas tardes! Sabes cuáles son las principales diferencias entre la brother GTXpro vs. Brother GT3 ? Saludos desde argentina !
@LionSharpAction Жыл бұрын
Thx for this valuable video man. Just one question, At the end you mentionned that U turned off the tools for 2 months and no issues at all, both of the printer Epson and GTX turned off right?
@amedionteo Жыл бұрын
Yea.. Both.. Make sure proper closure maintenance done.
@LionSharpAction Жыл бұрын
@@amedionteo Thx man !
@blackdeath5134 Жыл бұрын
You're doing great videos, thank you for the insights and information. What do you think, a volume of 300-500 prints per month is too low to consider buying a GTX?
@amedionteo Жыл бұрын
Thats good enough for a GTX.
@blackdeath5134 Жыл бұрын
@@amedionteo Thank you for your reply! My biggest concern however and what has stopped me from purchasing a DTG printer is the fact that it basically has to run constantly in order to prevent clogging of the print head, right? So I can't just plug the printer out and let it sit for 7-10 days. So what to do, if you need to be absent for a while?
@amedionteo Жыл бұрын
@@blackdeath5134 with the new gtx u can. The white printhead is very reliable. Just set to transportation mode and u will be fine.
@blackdeath5134 Жыл бұрын
@@amedionteo thank you, sir!
@comdruk Жыл бұрын
Hello, I would like to bay ink chip for epson f2100 or chip reseter. Where can I bay it? Best quality.
@hamizishah31773 жыл бұрын
Why you doing powerful cleaning, I'm really scare doing powerful cleaning cause use a lot cc ink
@amedionteo3 жыл бұрын
It will run powerful cleaning after your white ink circulation
@khalil209910 ай бұрын
is it easy for the printhead to get clogged ? if dont print in 1 week time.
@amedionteo10 ай бұрын
U can let it rest for 2 weeks no issue. Though its recommended to run frequently
@raulduro809 Жыл бұрын
What would you say are the hitting costs of Epson?
@amedionteo Жыл бұрын
I dont get your question
@anthonyh84977 ай бұрын
Maybe they meant hidden cost?
@Karim-miki2 жыл бұрын
Nice video bro But you didn't talk about the price
@amedionteo2 жыл бұрын
Yeap cause price may change based on region or other factors. So i dont mention it
@Karim-miki2 жыл бұрын
@@amedionteo brother GTX price not exactly And thanks a lot
@hehehaha47002 жыл бұрын
does 30 counts as high vloume?
@amedionteo2 жыл бұрын
Depends on your margin as well. If you have high margin enough to cover your maintenance & ROI then that's okay.
@hehehaha47002 жыл бұрын
@@amedionteo I see OK because I feel Epson is more suitable but when say the volume part I got scared
@hehehaha47002 жыл бұрын
@@amedionteo I'm talking about 30 a day btw for epson
@amedionteo2 жыл бұрын
@@hehehaha4700 yeah 30pcs per day is just good for epson and not so bad for GTX. Sometimes you get bulk orders then GTX will be more suitable.
@hehehaha47002 жыл бұрын
@@amedionteo got it
@foreignnola78323 жыл бұрын
What’s the best tshirt to print on? Bella canvas? Next level?
@amedionteo3 жыл бұрын
We have limited brands in Malaysia. They're either expensive or stock shortage so we use Gildan only. No idea on Bella Canvas and Next Level. Cant' answer. Sorry.
@inkaprintclt80042 жыл бұрын
I am a screen printer in NC. I use most of the time BELLA CANVAS for their color options, fit and soft feel of the shirt. I have also used Next level and they are good quality as well; both of those are a little more expensive than other brands but still not as expensive as American Apparel. But if you are going for economy or basic quality shirts Gildan / ALSTYLE are the better option. Hope this helps.
@javiervelez732 жыл бұрын
What’s the use of that, vapor machine? at the side of the printer?
@amedionteo2 жыл бұрын
that's humidifier.
@nate1hunnitmedia7902 жыл бұрын
How to order T-shirts?
@phinelia Жыл бұрын
For me the make or break decision to choose from either is the print size 🤔 I wish these things printed a little bigger
@Trerozay Жыл бұрын
Hello, how long does the white ink last on your dtx ?
@amedionteo Жыл бұрын
Not coming off yet so far even after 5years. just a little crack lines.
@mounirhachem87333 жыл бұрын
Have you ever looked into omniprint freejet 330tx plus?
@TheArpits3 жыл бұрын
Replace all of your DTG machines with a Epson F3030.
@amedionteo3 жыл бұрын
Can you sponsor me?
@TheArpits3 жыл бұрын
@@amedionteo haha...i can see 2 brother gtx and your new F2130, F3030 will cost the same and you will save a lot on inks.
@amedionteo3 жыл бұрын
@@TheArpits thats not my Epson. :) I prefer few units of Brother GTX over one unit of DTG whether Pro Bulk or F3030. Our volume not as much to use expensive machine. xD
@TheArpits3 жыл бұрын
@@amedionteo What are your thoughts about the F3030? I am planning to get one.
@amedionteo3 жыл бұрын
@@TheArpits The speed bottlenecks with their PT and inks at 60s time. You need to pair it with dryer to be efficient. Then Epson have lots of hidden cost as i mentioned in the video. Not sure about F3030 though. But if u have the budget then why not. Its fast. ;)