CanvasWorkspace: Explaining the Properties Panel

[@sheilaflexer6562]

so helpful! thank you

[@BrotherCraftsUSA]

Our pleasure, Sheila! 💙 ~pw

[@janjeffers3462]

THanks for a great video - always learning!

[@BrotherCraftsUSA]

You're welcome! Enjoy! ~ms

[@cmarlow41]

That was a great and informative video!

[@BrotherCraftsUSA]

Thank you for watching and sharing positive feedback! ~ms

[@lindasmith3502]

Thank you. I learned so much.

[@BrotherCraftsUSA]

Our pleasure, Linda! ~rp

[@sharone9751]

Super informative!!

[@BrotherCraftsUSA]

We are so glad that you found it helpful, Sharon! ~rp

[@CraftopiaDigitalDesigns]

Hi Julie. I've watched many of your tutorials over the years. I changed my hobbies, and decided to break out my scan n cut😵‍💫. I work now creating signs. And wanted to create my own stencils. As in Australia stencils are very expensive, or very limited on designs and themes. So I decided to be brave and just do it. lol. I just used a cut file stored on the machine, it worked perfectly. The only issue I have is the little pieces on the lower case letter e. I chose the word Believe. They are so tiny and difficult to fix onto the project. Is there another way of keeping it all together. Ive seen other cut files with gaps on the letters themselves. I'd appreciate your help with this ❤️

[@BrotherCraftsUSA]

When transferring, you'll want to be sure and rub well over the vinyl letters to help adhere them to the project and then very slowly and gently, peel back the transfer paper, to help prevent pulling any small bits away. Using the weeding tool may help to hold down smaller pieces.

[@BethCrafts]

How do I get .125 increments to be a true 8th. It shows .13 which is NOT 1/8

[@BrotherCraftsUSA]

Beth, our Customer Support team would be happy to answer your questions. You can contact them here: bit.ly/3B5PJLU for further assistance. ~tw

[@49lucky]

My poor snc won't connect to wifi.. so I don't use canvas.. 😢😢😢😢😢

[@sheldaschimmel4970]

You can save to a USB and take it to your snc

[@BrotherCraftsUSA]

We are sorry to hear that you are unable to connect your Brother ScanNCut to your WiFi. Please see the links below for further assistance: help.brother-usa.com/app/answers/detail/a_id/158161 help.brother-usa.com/app/answers/detail/a_id/161866 If you are still experiencing the same issue, please contact Brother Customer Service directly at: www.brother-usa.com/support

[@49lucky]

It's an snc85s and it says it doesn't exist

[@49lucky]

Sdx85s