BRS-8 Multifuel burner in a Trangia stove

Steen Berner´s Adventure bike show Episode 1: How to build in a multifuel burner, to a Trangia stove for only 47$
Music:
Real Bad Girl af Audionautix er givet i licens i henhold til en Creative Commons Attribution license (creativecommon...)
Kunstner: audionautix.com/

[@startsontime]

Brilliant

[@robpinter5431]

Brilliant, the combination of an efficient cooking system with a multi fuel burner that runs on petrol, I too ride Adventure motorcycles and metro is hard to obtain in some places, so this modification ticks both boxes....and you have some spare fuel for the bike just in case....

[@Tailslol]

whoa you just made the best stove ever for winter. and lowest price possible.

[@steenberner2488]

Tailslol it is wery easy to make, i hope you injoy

[@Tailslol]

if you have a k jet with it i heard you can drill it to 0.8mm so you can use alcohol directly in the multi fuel stove.

[@victorjones3536]

Tailslol I also have this set up I got a adaptor so I can use cheaper gas cans rather than the Colman adaptor that comes with the brs. I would not even consider using the fuel bottle gas is cheaper compared

[@victorjones3536]

Steen Berner Vevest ... unlike toast I am thinking of cutting a round mesh and cut 3 slots to flip the legs up into it to make it stable. to sit on top of the tranjia and place bread to make toast. there are tranjia toasters but there no good I think I would make a great video if you had the time.

[@alexcornofficial]

Thank you for this video! Im going to do the same

[@richardbaker8928]

You can buy the burner holder/priming dish for very little on ebay. I use them for a Booster clone/Omnifuel/Nova, works very well in Winter

[@luiscarlosmarques3946]

Eu sou viciado em Stove burners, Espiriteiras e lampiões a querozene. Eu sou normal ? 😂

[@VFR1200xtourer]

Tak for en meget god video. Jeg har selv tænkt over dette, men du gav mig den bedste løsning, suveræn. Med venlig hilsen Lars

[@steenberner2488]

Selv tak, dejligt du kan bruge løsningen

[@jarikinnunen1718]

I was thinking to make same style modification, but my style to do is more variable systems. In trangia wind shields, upper part is more important. To use it with almost any stoves, require to make holes for the wire supports which stand on stove legs. To use lower part, require smaller than hole, fire ring, otherwise aluminum melt in flame.

[@GospodinJean]

Do u know where to find gasoline proof orings for that stove?

[@onemanwulfpack5954]

Brilliant!

[@jarikinnunen1718]

Maybe cheap trangia knockout copy is suitable for make support? Cut its inner parts off and make holes for air like trangia own support?

[@johngalt6929]

Volume too low.

[@steenberner2488]

If you follow the video, i mount a primer cup, it is the little top from the jam-glass and i works perfect

[@antoniom.andersen6704]

Probably a good idea to put the jam glass metal top in a fire first to get rid of the rubber seal and the paint. Good vid though.

[@johngalt6929]

Sound volume is very low.

[@danielrudilille]

This is a "noisy burner". The one in Trangia is a "quite" burner. That is why the price is cheap for this chinese one.

[@jefwesb]

How long is each metal strip?

[@steenberner2488]

As Long as you need to set the right hight

[@bigstick5278]

If you could mount a primer cup under that burner head it would make less of a mess.

[@LaurentGouzouAKALynx]

Very brilliant idea👍👍👍 I have 2 questions for you, first why you fit the burner so low? Second does the aluminium of the Trangia windshield and base melt with time because of the more intense heat the multifuel burner produce compare to the alcohol burner?

[@steenberner2488]

Laurent Gouzou AKA Lynx1963 Thanks for your qustion. 1 i have raised the burner a little bit, Then it provides more heat to the pot. 2. No the alu does NOT melt, Trangia sell the same type of burner but much more expensive

[@LaurentGouzouAKALynx]

Steen Berner Vevest thanks for your response Buddy, I have another 😀 I am looking for that BRS burner on amazon and they have 2 versions one with a plastic/ nylon pump and another one with a aluminum/brass pump but more expensive. Does it worth to spend more money for the aluminum/brass one🤔

[@steenberner2488]

Laurent Gouzou AKA Lynx1963 Can’t help you there, you must consider Price vs. Quality I Think my one is made of metal

[@danielrudilille]

@@steenberner2488 Price vs. Quality, buy Trangia then. Sorry, just had to.

[@911blackadder]

Why not using cheap Chinese Trangia counterfeit to be used as bottom holder instead of jam cup... I bet they will be perfect fit.

[@steenberner2488]

The jam cup is for free, you can do what you fel is the best for you

[@JoTh9090]

Where did you get the steel band? My local hardwearstores dont have them...

[@steenberner2488]

It is the steel band that some company use around pallets when they send pallets on a truck.

[@JoTh9090]

Steen Berner Vevest Ah okay. Sadly they usually use plastic bands around here. I think I will just order the Optimus adapter

[@victorjones3536]

Jonas Thalmeier ...I got a adaptor for a tenner and also the gas canister adaptor as the brs has the Coleman adaptor I get gas canisters half the price of the Coleman gas out my outdoor stores.

[@jonfyfazan]

👏👏👍👌🇳🇴😷