BRUSHLESS RC POWER WHEELS: IT'S FAST!!

[@robinhoodloom5795]

How do I upgrade my 24v Ride on tank to Hobby Grade RC.i wanna control it from a mile away

[@KelleyWilliams143]

So awesome. And omg shes growing up so fast!

[@BREW2LFOXBODY]

Kelley Andress-Smith Yes she is...

[@Chasedroog]

Holy cow dude this is awesome got some power to it

[@jeremygeorgia4943]

You might want to add another motor to the other side, if you still have it. If you look up the brand and the vehicle description, you can probably find an additional gearbox for that vehicle. There is usually a spacer on the axle, where the other motor would go. You'd just need to remove that spacer & install the new gearbox. You would need another motor for it, obviously. Pay attention to the axle size. For the generic brands, they are usually 1.0 cm or 1.2 cm. If you find a gearbox that looks like the one you need, just make sure the hole size matches your axle. If you still have the vehicle, you could upgrade it into a full large scale R/C car. The extra motor would give it more traction, reduce spinning out, and keep it from pulling to one side. I know your daughter's older now, but maybe it could be used to teach her about cars & driving R/C vehicles. It's always good to know the physics of cars, before learning to drive.

[@torianblair3362]

Should make it true 4x4 now she'll love off roading it lol...great video

[@Royaltyfamily85]

SO DOPE!!!! Taking kids candy money in that bad boy!!

[@BREW2LFOXBODY]

Whole preschool gettin gapped. 💪😤

[@marqueengram]

Did you ever get the steering working

[@kadirm4924]

How hard to build? You’ve just inspired my next project

[@mosrcgarage3461]

That's awesome! 2 questions. Will a 1.8 scale. Motor fit in there? And how did you get the wheel for.

[@jamesmaddison4546]

Haha that thing is sick. My son recently got a power wheel and man that thing has no power at all really so ive been looking at swapping some components, guessing you had to change out all the wiring harnesses to handle the power for this motor?

[@GiwrgosD.510]

my friend brew2l has done a lot of good work and because I was jealous I think to do it, there is a problem if I put two 9T 4370KV Brushless? right now has two small 12v motors

[@rccorcoles7082]

What setup u used ?

[@randomstuff-wg6nj]

well im gonna add a Racerstar 2440 Motor Brushless Waterproof Sensorless because my power wheels use a 380motor. i have a 540brushed motor but it does not fit i got 2 questions nr 1 what kv shall i go for? 4000kv or 4600kv or 6080kv nr 2 can i directly connect the brushless motor to a battery?

[@BREW2LFOXBODY]

random shit I would go with 4600kv personally. Just hook everything up like you would in an RC car. Battery to esc and esc to motor.

[@randomstuff-wg6nj]

ok ty

[@chucks1545]

Thinking about doing an 18v Milwaukee battery upgrade to my daughters 6v powerwheel. Only concern I have is frying the electronics for the remote, lights and radio. Does anyone have any experience with this?

[@benji-DS]

Soo goood😅😅👍🏼👍🏼👍🏼

[@fangyproductionz]

Is it single wheel drive?

[@randomstuff-wg6nj]

9000kv,,, Does it got enough Torqe ?

[@BREW2LFOXBODY]

random shit yes it has plenty of torque to be honest the 9000kv is way too fast of a motor for the car. I think a 5000 would be a all around better choice.

[@dakotamartin7850]

Low kv = more torque

[@feellnfroggy]

Need abuild video, that is awesome

[@brayden_Z]

Nice now how did you do that let me know the info plz what i need to get n buy ...

[@BREW2LFOXBODY]

brayden Zambrana it is my motor, battery and esc from my rc car. I'll do a video about what's needed to make it work soon.

[@brayden_Z]

Yes please I'm doing the my son car now how to make faster I'm in the middle of breaking the esc. Or maybe buy a different one I have no idea what I'm doing . And he have car show coming up in March.. so deff need your help .. follow my son page @braydenaudir8

[@BREW2LFOXBODY]

Do you have the motor, esc, battery, transmitter and receiver?

[@brayden_Z]

Yea i have all that it comes with a 6v to 12v. 12v battery but the esc i think overheat and turns off for 10sec and rides for 30sec. And then turns off n restart

[@brayden_Z]

BREW2L maybe is the transmitter maybe i need to get a 30/or 40amp stock is 20amp. I don't know that's why i need help .

[@renos1109]

Needs posi

[@BREW2LFOXBODY]

Definitely 🤟😆

[@BobbyChounramany]

how fast does it go without the child in it?

[@BREW2LFOXBODY]

Bobby Chounramany haven't tested it, but I'm sure around 30 ish mph or so.

[@uversusog4495]

BREW2L ITS SO SIMPLE!!!!!!(:

[@michaelbaxter1486]

That's bad ass!!

[@renatocosta1993]

Top, kkk

[@ustice91]

yes good car good brushless bad accu lipo is very bad range

[@thatDUDEoverTHERE010]

To toys r us I go

[@BREW2LFOXBODY]

Dustin Jackson absolutely!

[@terrylindsey6955]

All's true! not joshing you peeps lmao!

[@jeremymoreside1444]

Why would you use a 1/10th scale motor in something that weighs 40+lbs with a child? I recommend a 1/5th scale motor. One the size of a pop can.. like a 700 series or bigger. I'd also use a very low kv motor like a 500kv or even a 380kv at best. Feed it 4s or 6s and gear it. I'd rather have a fuck ton of torque than speed. Your gear reduction must be intense..

[@LightGesture]

Do you know what to buy to do what you're talking about? I don't know what to buy where to look..... Your idea sounds so much better than all this power with no traction and a ridiculous 1 wheel spin.

[@blakehyslop2605]

LightGesture you can look at castle creations! They have some crazy escs and motors!

[@terrylindsey6955]

Nice! are you will to put up your pink slip? power wheels maserati against your mini db cooper paratrooper? can do it want b fare. I'm running a big chain saw engine fueled with nitro methane. head work /rod mod/piston up grade/soild rear axle/gearing mod/some carbon fiber up grade from scratch. and they would lock me up for life if i was to let my kids ride in it! tryed to put my girlfriends feline in it..didnt go down good at all ! cat tore my ass up . and then she opened up a raunchy can of whoop ass! i couldnt wait for her to leave to go shoping! you see i got cat scratch fever after kitty kitty pulled a freddy krueger on my arms. so i went and got my welding gloves and carhartt jacket and went back to finish my job. AND NO ANAMALS WERE HURT during the experiment in fact the little fella became the fastest furball in town! and he got a speeding ticket . And for me I almost got put in the nut house. my ruka never found out either. boy if she did she would chop off my webbles!

[@gatyi28]

Hahahaha. I love it :)